Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdfPlasti-Chemie GmbH
Wie wird ein Plastifloor Kellenbekag mit Rutschfestigkeitsklasse R10 aufgebaut? Plastifloor harze sind schnell härtende Metacrylatharze, hergestellt von Plasti Chemie in Deutschland.
Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdfPlasti-Chemie GmbH
Wie wird ein Plastifloor Kellenbekag mit Rutschfestigkeitsklasse R10 aufgebaut? Plastifloor harze sind schnell härtende Metacrylatharze, hergestellt von Plasti Chemie in Deutschland.
Plastifloor 800 PD is a waterproofing and protection system for concrete park decks. It consists of a primer, waterproofing membrane, drivable base coat, and colored sealer. The system offers high performance including crack bridging, chemical resistance, fast curing, and durability. It is suitable for new construction and refurbishment of damaged deck coatings. The system is applied to the prepared concrete in multiple layers that are troweled, rolled, and sealed to create a waterproof and slip resistant surface.
Plastifloor PUMMA resins are hybrid resins from MMA and PU. They are used for bridge deck repairs and overlays as well for waterproofing coatings on steel or concrete bridges. Plastifloor resins are approved by TÜV SÜD.
Fallstudie Plastifloor Boden in einem REWE Markt in LaufPlasti-Chemie GmbH
Plastifloor Harze können hervorragend für die Sanierung von Lebensmittelabteilungen in Kaufhallen eingesetzt werden, da diese Reaktionsharze schnell aushärten und der neue Boden bereits 2 h nach der Versiegelung wieder voll belastbar ist.
Plastifloor Boden als Fallstudie in der FeinkostherstellungPlasti-Chemie GmbH
Plastifloor Böden sind eine ideale Lösung für die Sanierung von Böden in der Feinkostherstellung. Der neue Plastifloor Boden kann über das Wochenende eingebaut werden und ist bereits 2 h nach der Versiegelung wieder voll belastbar.
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdfPlasti-Chemie GmbH
Wie baue ich einen Plastifloor Einstreubelag R 11 aus? Plastifloor Harze sind schnell härtende Metacrylatharze und werden in vielen Industriezweigen verwendet. Plastifloor ist made in Germany.
Plasti-Chemie produces Plastifloor and Plastipur resin coatings for industrial and commercial flooring applications. Their resins cure quickly, within 1-2 hours for Plastifloor and 6-7 hours for Plastipur. The company has production facilities in Germany and the US, shipping resins worldwide in drums, pails, and other containers. Plastifloor resins are methacrylate-based and offer high chemical resistance for applications such as parking decks, ship decks, and more. Installation involves surface preparation, application of primers and mortars, then coatings and sealers. Plasti-Chemie offers training and technical support for applicators.
Plastifloor produces MMA and PUMMA resin flooring systems in Germany. The resins were developed in 1995 and have proven effective in tough industrial and commercial conditions due to their fast curing, hygienic, and durable properties. Plastifloor offers a variety of resin products for primers, base coats, sealers, and topcoats that are customized for different substrate types and performance requirements.
Plasti Chemie is manufacturing fast curing Plastifloor and Plastipur resins since 1995. Plastifloor Plastipur and Plastistone resins are shipped into 50 countries. Check out also www.plasti-chemie.de
The hotel resort La Samanna in St. Martin needed to reconstruct the walk-in cooler flooring. The old tile flooring was difficult to clean and maintain and did not provide chemical or mechanical protection. It was replaced with Plastifloor, an seamless elastic epoxy resin flooring system, in a short timeframe over a weekend to minimize business disruption. The new flooring provides hygienic, slip-resistant, and easy to clean and maintain flooring suitable for the food service environment.
The document describes the reconstruction of a private pool in South Africa using Plastifloor® MMA resin coatings. The old cracked concrete pool was prepared by grinding, priming, and filling cracks. Then a flexible Plastifloor® 332 membrane and Plastifloor® 418 resin coating were applied which could be used just 2 hours later. The Plastifloor® system provides a seamless, waterproof, slip resistant, and easily cleanable surface suitable for pools.
Meilinger's meat and animal trading company needed to replace the old, cracked concrete floors in their meat production facility. They chose the Plastifloor® flooring system distributed by Plasti Chemie, which could be installed quickly over a weekend. The old floor was prepared by shot-blasting and filling cracks before applying primer, a flexible membrane, base coat, and sealant. The new seamless Plastifloor® floor allows easy cleaning and is better suited than tile or epoxy for withstanding temperatures in the meat facility. Production could resume on Monday after installation was completed by Sunday noon.
The document summarizes the reconstruction of industrial floors at Geiger Automotive Company in Ziemetshausen, Germany using the Plastifloor coating system. The existing damaged resin floors were milled, cracks were filled, and a primer was applied before installing a flexible membrane and final coating. This allowed the floors to be ready for use just 2 hours later, minimizing production downtime. Plastifloor provides a hard, durable flooring solution that can withstand thermal and vibration stresses in industrial environments.
1. Plastifloor® 540
Mittelviskoses, elastifiziertes Methacrylat Basisharz zur
Herstellung von Hohlkehlpasten
06.07.2018 1 /2
Plasti-Chemie Produktionsgesellschaft mbH Telefon: +49 (0) 37 45 / 744 32-0 Email: info@plasti-chemie.de
Falgardring 1 Telefax: +49 (0) 37 45 / 744 32-27 Internet: www.plasti-chemie.de
D – 08223 Falkenstein / Germany
Eigenschaften: Plastifloor®
540 zeichnen sich durch seine Elastizität, hohe
Füllbarkeit und klare Aushärtung aus. Plastifloor® 540 wird
vorzugsweise wegen seiner guten Benetzungseigenschaften
von Füllstoffen und Pigmenten zur Herstellung von Hohl-
kehlpaste mit Aerosil®
oder Sylothix®
verwendet.
Kenndaten: ____________________________________________________
Lieferform flüssig, blau
Auslaufzeit 35-45 sec (20°C), DIN Auslauf Becher, 4
mm
Aushärtung 25 - 35 min (20°C und 2 % Härter)
Dichte bei 20°C DIN 51757 1,0 g/cm³
Flammpunkt DIN 51755 +10°C
Lagerfähigkeit dunkel bei < 20 °C max. 6 Monate
Liefergebinde 180 kg Fässer, 25 kg, 10 kg Eimer
Initiator/Härter: Härtepulver 50 W (BPO, 50 %ig), temperaturabhängig.
Lagerbedingungen: Lagerung bei ≤ 25°C. Vor direkter Sonneneinstrahlung
schützen. Bei Temperaturen unter + 15°C kann das im
Bindemittel gelöste Paraffin ausfallen. Vor Gebrauch muss das
Material gut aufgerührt werden!
VbF: A I
GISCODE: RMA 10
Zolltarifnummer: 320 820 10
Mischansatz: 19 l Plastifloor® 540
(Paste) 1 kg Aerosil® 200
2. Plastifloor® 540
Mittelviskoses, elastifiziertes Methacrylat Basisharz zur
Herstellung von Hohlkehlpasten
06.07.2018 2 /2
Plasti-Chemie Produktionsgesellschaft mbH Telefon: +49 (0) 37 45 / 744 32-0 Email: info@plasti-chemie.de
Falgardring 1 Telefax: +49 (0) 37 45 / 744 32-27 Internet: www.plasti-chemie.de
D – 08223 Falkenstein / Germany
Verarbeitung
der Paste: Die Paste aus Plastifloor® 540 und Aerosil®
wird ca. 1:3 mit
Farbquarzsand der Körnung 0,4 – 2,0 mm gemischt, so dass
eine thixotrope, nicht mehr absackende Masse entsteht
(Kellentest). Ist eine gut verarbeitbare Masse angemischt
worden erfolgt die Zugabe von Härter 50 W, in Abhängigkeit der
Bodentemperatur (1-4 Vol.%, siehe Tabelle). Die Hohlkehlen-
masse wird mit einer Flachkelle vorgelegt und dann mit einer
entsprechend gekrümmten Hohlkehlenkelle geglättet. Nach
dem Erhärten wird die Oberfläche der Hohlkehle, wenn nötig
verschliffen und dann mit Plastifloor® 522, 526 oder 528 als
klare Versiegelung versiegelt, in Nassbereichen mit
Temperaturwechselbeanspruchung wird Plastifloor® 526
eingesetzt.
Topf- und Härtezeiten
in Abhängigkeit von
der Temperatur:
*) Härtermenge auf Plastifloor® 540 bezogen
**) Die Temperaturangaben beziehen sich auf Harz-, Boden- und
Lufttemperatur
Hinweise: Verlegung nur auf vorgrundierten Flächen! Eine gute Raum-
belüftung während der Verarbeitung garantiert eine gute
Aushärtung.
Unsere Angaben über unsere Produkte und Geräte sowie über unsere Anlagen und Verfahren beruhen auf umfangreicher
Entwicklungsarbeit und anwendungstechnischer Erfahrung. Wir vermitteln diese Ergebnisse, mit denen wir keine über
den jeweiligen Einzelvertrag hinaus gehenden Haftung übernehmen, in Wort und Schrift nach bestem Wissen, behalten
uns jedoch technische Änderungen im Zuge der Produktionsentwicklung vor. Das entbindet den Benutzer jedoch nicht
davon, unsere Erzeugnisse und Verfahren auf ihre Anwendung für den eigenen Gebrauch selbst zu prüfen. Das gilt auch
hinsichtlich der Wahrung von Schutzrechten Dritter sowie für die Anwendungen und Verfahrensweisen, die von uns nicht
ausdrücklich schriftlich abgegeben sind.
Temperatur [°C]
**)
Härter [Vol.-%]
*)
Topfzeit
[min.]
Härtezeit
[min.]
+ 5 4,0 ca. 20 ca. 50
+10 3,0 ca. 15 ca. 45
+20 2,0 ca. 10 ca. 25
+30 1,0 ca. 10 ca. 15