Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdfPlasti-Chemie GmbH
Wie wird ein Plastifloor Kellenbekag mit Rutschfestigkeitsklasse R10 aufgebaut? Plastifloor harze sind schnell härtende Metacrylatharze, hergestellt von Plasti Chemie in Deutschland.
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdfPlasti-Chemie GmbH
Wie baue ich einen Plastifloor Einstreubelag R 11 aus? Plastifloor Harze sind schnell härtende Metacrylatharze und werden in vielen Industriezweigen verwendet. Plastifloor ist made in Germany.
Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdfPlasti-Chemie GmbH
Wie wird ein Plastifloor Kellenbekag mit Rutschfestigkeitsklasse R10 aufgebaut? Plastifloor harze sind schnell härtende Metacrylatharze, hergestellt von Plasti Chemie in Deutschland.
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdfPlasti-Chemie GmbH
Wie baue ich einen Plastifloor Einstreubelag R 11 aus? Plastifloor Harze sind schnell härtende Metacrylatharze und werden in vielen Industriezweigen verwendet. Plastifloor ist made in Germany.
Plastifloor 800 PD is a waterproofing and protection system for concrete park decks. It consists of a primer, waterproofing membrane, drivable base coat, and colored sealer. The system offers high performance including crack bridging, chemical resistance, fast curing, and durability. It is suitable for new construction and refurbishment of damaged deck coatings. The system is applied to the prepared concrete in multiple layers that are troweled, rolled, and sealed to create a waterproof and slip resistant surface.
Plastifloor PUMMA resins are hybrid resins from MMA and PU. They are used for bridge deck repairs and overlays as well for waterproofing coatings on steel or concrete bridges. Plastifloor resins are approved by TÜV SÜD.
Fallstudie Plastifloor Boden in einem REWE Markt in LaufPlasti-Chemie GmbH
Plastifloor Harze können hervorragend für die Sanierung von Lebensmittelabteilungen in Kaufhallen eingesetzt werden, da diese Reaktionsharze schnell aushärten und der neue Boden bereits 2 h nach der Versiegelung wieder voll belastbar ist.
Plastifloor Boden als Fallstudie in der FeinkostherstellungPlasti-Chemie GmbH
Plastifloor Böden sind eine ideale Lösung für die Sanierung von Böden in der Feinkostherstellung. Der neue Plastifloor Boden kann über das Wochenende eingebaut werden und ist bereits 2 h nach der Versiegelung wieder voll belastbar.
Plasti-Chemie produces Plastifloor and Plastipur resin coatings for industrial and commercial flooring applications. Their resins cure quickly, within 1-2 hours for Plastifloor and 6-7 hours for Plastipur. The company has production facilities in Germany and the US, shipping resins worldwide in drums, pails, and other containers. Plastifloor resins are methacrylate-based and offer high chemical resistance for applications such as parking decks, ship decks, and more. Installation involves surface preparation, application of primers and mortars, then coatings and sealers. Plasti-Chemie offers training and technical support for applicators.
Plastifloor produces MMA and PUMMA resin flooring systems in Germany. The resins were developed in 1995 and have proven effective in tough industrial and commercial conditions due to their fast curing, hygienic, and durable properties. Plastifloor offers a variety of resin products for primers, base coats, sealers, and topcoats that are customized for different substrate types and performance requirements.
Plasti Chemie is manufacturing fast curing Plastifloor and Plastipur resins since 1995. Plastifloor Plastipur and Plastistone resins are shipped into 50 countries. Check out also www.plasti-chemie.de
The hotel resort La Samanna in St. Martin needed to reconstruct the walk-in cooler flooring. The old tile flooring was difficult to clean and maintain and did not provide chemical or mechanical protection. It was replaced with Plastifloor, an seamless elastic epoxy resin flooring system, in a short timeframe over a weekend to minimize business disruption. The new flooring provides hygienic, slip-resistant, and easy to clean and maintain flooring suitable for the food service environment.
The document describes the reconstruction of a private pool in South Africa using Plastifloor® MMA resin coatings. The old cracked concrete pool was prepared by grinding, priming, and filling cracks. Then a flexible Plastifloor® 332 membrane and Plastifloor® 418 resin coating were applied which could be used just 2 hours later. The Plastifloor® system provides a seamless, waterproof, slip resistant, and easily cleanable surface suitable for pools.
Meilinger's meat and animal trading company needed to replace the old, cracked concrete floors in their meat production facility. They chose the Plastifloor® flooring system distributed by Plasti Chemie, which could be installed quickly over a weekend. The old floor was prepared by shot-blasting and filling cracks before applying primer, a flexible membrane, base coat, and sealant. The new seamless Plastifloor® floor allows easy cleaning and is better suited than tile or epoxy for withstanding temperatures in the meat facility. Production could resume on Monday after installation was completed by Sunday noon.
The document summarizes the reconstruction of industrial floors at Geiger Automotive Company in Ziemetshausen, Germany using the Plastifloor coating system. The existing damaged resin floors were milled, cracks were filled, and a primer was applied before installing a flexible membrane and final coating. This allowed the floors to be ready for use just 2 hours later, minimizing production downtime. Plastifloor provides a hard, durable flooring solution that can withstand thermal and vibration stresses in industrial environments.
1) The Hösl Brewery in Mitterteich, Germany previously had an epoxy resin floor that showed deficiencies after a short time.
2) The floor was reconstructed over one weekend using the Plastifloor® flooring system, which includes an elastic membrane, broadcast coating, and is produced by Plasti-Chemie Produktionsgesellschaft GmbH.
3) The Plastifloor® system allowed for a jointless, crack-free floor that could be installed quickly, minimizing downtime for the brewery.
Plastifloor® polymer concrete was used to repair runways in Siberia at -35°C. The fast-curing concrete allows repairs to be completed within a few hours, allowing planes to use the runways again quickly. The substrate is prepared by cleaning and grinding, then primed and topped with Plastifloor® and quartz sand. Plastifloor® cures within 1 hour at extremely cold temperatures, avoiding costly downtime for runways. The polymer concrete provides durable, skid-resistant repairs that flex with temperature changes better than other materials.
1. Plastifloor® - Rissversiegelung 114
Niedrigviskoses, schnellhärtendes 2-K
Tränk - und Injektionsharz für Beton- und Zementestrich
10.07.2018 1 /2
Plasti-Chemie Produktionsgesellschaft mbH Telefon: +49 (0) 37 45 / 744 32-0 Email: info@plasti-chemie.de
Falgardring 1 Telefax: +49 (0) 37 45 / 744 32-27 Internet: www.plasti-chemie.de
D – 08223 Falkenstein / Germany
Anwendung: Rissversiegelung 114 dient zum Verfestigen und Tränken extrem
poröser Untergründe sowie zum Schließen von Rissen in Verbund-
Estrichen, Betonkonstruktionen und als Vergussharz für hohl liegende
Estriche. Das Harz kann manuell verarbeitet werden. Das Fluten bis
zur Sättigung dient der Untergrundverfestigung. Nach der Tränkung
muss die Fläche mit Plastifloor® 112 zusätzlich grundiert werden!
Eigenschaften: Rissversiegelung 114 ist ein niedrigviskoses, lösemittelfreies,
reaktives Methacrylatharz, das auch bei tiefen Temperaturen schnell
aushärtet.
Kenndaten: ____________________________________________________
Lieferform leicht trübe Flüssigkeit
Auslaufzeit (DIN Becher 4mm) 10-16 sec. (20°C)
Dichte bei 20 °C DIN 51757 ca. 1,00 g/cm³
Flammpunkt DIN 51755 +10 °C
Lagerfähigkeit dunkel bei < 20 °C mind. 6 Monate
____________________________________________________
Richtrezepturen
PF 114
Grundierung: Rissversiegelung 114 darf mit Härter 50 W verarbeitet werden. Die
Härtermenge muss der jeweiligen Objekttemperatur angepasst
werden (siehe Tabelle). Bei Temperaturen unter +5 °C kann zusätzlich
Beschleuniger 101 eingesetzt werden (ca. 0,5 % bei 0 °C bis 3 % bei
–30 °C) unter Beibehaltung der 6 Vol. -% Härterpulver.
Nach dem Einmischen des Härterpulvers wird Plastifloor® 114 mit
einem Roller oder Gummischieber gleichmäßig auf dem Untergrund
verteilt (fluten). Bei stark saugenden Untergründen ist vor dem
Aushärten nass in nass bis zum Porenschluss nachzufluten.
Verbrauch ca. 500-1000 g/m² je Arbeitsgang und Saugfähigkeit des
Untergrundes.
2. Plastifloor® - Rissversiegelung 114
Niedrigviskoses, schnellhärtendes 2-K
Tränk - und Injektionsharz für Beton- und Zementestrich
10.07.2018 2 /2
Plasti-Chemie Produktionsgesellschaft mbH Telefon: +49 (0) 37 45 / 744 32-0 Email: info@plasti-chemie.de
Falgardring 1 Telefax: +49 (0) 37 45 / 744 32-27 Internet: www.plasti-chemie.de
D – 08223 Falkenstein / Germany
Mischansatz: 8 l Rissversiegelung 114
240 ml Härter 50W (bei 20°C Bodentemperatur)
Topf- und Härte-
zeiten in Ab-
hängigkeit von
der Temperatur:
Der weitere Schichtenaufbau mit Plastifloor® Beschichtungen darf nur
auf vollständig ausgehärteten Schichten erfolgen.
Temperatur(°C) Härter(Vol.-%)* Topfzeit(min.) Härtezeit(min.)
0 - 5 6 ca. 11 ca. 30
5 -10 5 ca. 8 ca. 30
10 -15 4 ca. 8 ca. 30
15 -20 3 ca. 7 ca. 30
20 -25 2 ca. 8 ca. 25
25 -30 1 ca. 6,5 ca. 20
__________________________________________________
*Härtermenge auf reines Harz berechnet (Härter 50W)
Achtung:
Härtermengen unter 1 Vol. % können zu Polymerisationsstörungen
führen!
Eigenschaften: Reißdehnung DIN 53455 ca. 1,5%
Shore-D DIN 53505 ca. 70-80 Einheiten
Lagerung: Für Methacrylatharze gelten die Vorschriften beim Umgang mit leicht
entzündlichen Stoffen. Plastifloor® Harze sind kühl, vor direkter
Sonneneinstrahlung geschützt, möglichst bei Temperaturen von 15-20
°C zu lagern. Bei der Lagerung können sich Paraffinanteile absetzen.
Vor der Verarbeitung sind die Gebinde daher gründlich aufzurühren.
Beachten Sie bitte auch unsere Hinweise auf den Sicherheitsdaten-
blättern.
Unsere Angaben über unsere Produkte und Geräte sowie über unsere Anlagen und Verfahren beruhen auf umfangreicher
Entwicklungsarbeit und anwendungstechnischer Erfahrung. Wir vermitteln diese Ergebnisse, mit denen wir keine über
den jeweiligen Einzelvertrag hinaus gehenden Haftung übernehmen, in Wort und Schrift nach bestem Wissen, behalten
uns jedoch technische Änderungen im Zuge der Produktionsentwicklung vor. Das entbindet den Benutzer jedoch nicht
davon, unsere Erzeugnisse und Verfahren auf ihre Anwendung für den eigenen Gebrauch selbst zu prüfen. Das gilt auch
hinsichtlich der Wahrung von Schutzrechten Dritter sowie für die Anwendungen und Verfahrensweisen, die von uns nicht
ausdrücklich schriftlich abgegeben sind.