An analysis of European plastics production, demand and waste data.
(Slidedeck from the press conference @K_tradefair 2019). Find the full report on our website https://www.plasticseurope.org
Independent Call Girl Number in Kurla Mumbai📲 Pooja Nehwal 9892124323 💞 Full ...
PlasticsEurope – Plastics the Facts 2019 – Economic development - Recovery progress
1.
2.
3.
4.
5.
6. Material of the 21st century
Special Show K 2019 Press conference 6
Increasingly higher
efficiencies of wind
turbines thanks to
rotor blades of
extreme tensile
strength – made of
glass-fibre reinforced
plastic.
Photo: Pixabay/Logga Wiggler
Solar Trees at EXPO
2015: Photovoltaic
cells on wafer-thin
plastic film were
shown at the German
pavilion. They adapt
to any form.
Photo: Schmidhuber + Partner GbR
Biodegradable mulch
film in agriculture,
easy to plough.
Photo: BASF
Only the power of the
sun and a vast
amount of plastics
know-how enabled
the Solar Impulse 2 to
fly around the world –
as the first solar-
powered aircraft.
Foto: Jean Revillard
3D-printed tracheal
splints can save
lives: individualised,
fast and easy
production, safe use.
Photo: Universit of Michigan
Hinweis der Redaktion
Production of plastics has increased by a bit more than 3% at global level.
In Europe, the production of plastics decreased by 4% in 2018 and will probably show another 5% decrease in 2019 due to:
Economies are slowing down worldwide
An important downturn of the German economy – the largest European plastic producing country
Not very good situation of some customer industries, such as the European Automotive industry which has experienced a decrease of almost 7%
Moreover, international trade is also affected by more global issues such as Brexit and China-U.S. trade war. These uncertainties are hurting business at global level.
In 2018 the converter demand in Europe reached the same level as in the previous year: above 51 million tonnes.
2019 forecasts show that apart from the food & beverage and the B&C industries, all other customer industries will probably experience a decrease (automotive, E&E, machinery, etc.)
In terms of waste treatment, the latest data show an annual average increase of 5,7% for recycling from 2006 to 2018.
It is worth highlighting that from 2006 to 2018 the amount of plastic waste sent to recycling has doubled.
However, still today, 25% of plastic waste is sent to landfill.
However, 25% of plastic waste is still sent to landfill.
Our industry calls for landfill restriction measures to be implemented all over Europe in order to achieve the circular economy of plastics.
As shown on the graph, countries that implemented landfill restrictions, have on average, higher recycling rates.
You can find more detailed information in the new edition of our annual brochure “Plastics: the Facts 2019” that we are launching today.