This document summarizes types of wind turbines and generators used in wind energy conversion systems. It discusses horizontal and vertical axis wind turbines and describes common generator types like squirrel cage induction generators for fixed speed systems and doubly fed induction generators for adjustable speed systems. Adjustable speed generators are preferred as they allow turbine speed to adjust to wind speed, improving efficiency and reducing mechanical stresses and noise. While power electronics make adjustable speed systems more expensive, they provide benefits like improved power quality and reduced acoustic noise.
1. WIND GENERATOR
Under the esteemed guidance of
Mr. G. Ravindra, M. Tech., (Ph. D.),
Asst. Professor,
Dept. of EEE, SVEC.
By
D. Subhash Reddy,
12121A0234.
DEPARTMENT OF ELECTRICALAND ELECTRONICS ENGINEERING
SREE VIDYANIKETHANENGINEERINGCOLLEGE
(An autonomous institution affiliated to JNTUA, Anantapuram)
Sree Sainath Nagar, Tirupati – 517 102
A Seminar on
Dept. of EEE
1
2. Contents
Introduction
Wind turbines
Types of Wind Turbines
Types of Generators in Wind Turbines
Wind Energy Conversion Systems
Advantages of Adjustable Speed Generators
Disadvantages
Conclusion
2
3. Introduction 3
Wind turbines convert the kinetic energy present in the wind into mechanical energy by means of
producing torque.
Among all the parts of a turbine the generator plays a vital role.
In the present scenario, most wind turbine manufacturers now equip power generating units by induction
generators.
They are operated either at fixed speed or adjustable speed.
Adjustable speed generation is preferred over fixed speed generation.
4. Wind Turbine
A wind turbine is a device that converts kinetic energy from the wind into electrical power.
The modeling of a turbine includes parameters such as optimum tower height, control
systems, number of blades and blade shape.
A quantitative measure of the wind power available at any location is called Wind Power
Density(WPD).
Wind turbines are generally classified depending on their axis of rotation as:
Horizontal axis type and
Vertical axis type.
4
7. Types of Generators in Wind Turbines
Generators driven by fixed speed turbines can directly be connected to grid called
Fixed Speed Generators (FSG).
Ex: Squirrel Cage Induction Generator.
Adjustable Speed Generators (ASG) need a power electronic converter interface for
interconnection with the grid.
Ex: Doubly Fed Induction Generator (DFIG).
7
8. Fixed Speed Wind Energy Conversion System
(Danish Concept)
8
Fig.4
9. Adjustable Speed Wind Energy Conversion System
In adjustable speed systems, the turbines rotor absorbs the mechanical power fluctuations by changing its
speed.
So the output power curve is smoother which greatly enhances the quality of power.
However, since adjustable speed operation produces a variable frequency voltage, so a power electronic
converter must be connected to the constant frequency grid.
It can be achieved by using:
Direct-in-Line ASG System
Doubly Fed Induction Generator ASG System
9
10. Direct-in-Line ASG System
In this set up the stator of the induction generator will be connected to the grid by the
means of back to back connected power electronic converter bridges.
Since the power converter has to convert all the stator power, the converter size depends
on the stator power rating.
10
Fig.5
12. Advantages of ASG over FSG
Reduced acoustic noise, because low-speed operation is possible at low
power conditions.
Improves system efficiency as turbine speed can be adjusted as a function
of wind speed to maximize output.
Reduced mechanical stresses.
Improved power quality.
12
13. Disadvantages of ASG 13
Use of Power Converter makes the system expensive.
The system efficiency mostly depends on the converter efficiency.
14. Conclusion 14
Large scale wind power projects are an attractive alternative to conventional
capacity expansion as they are getting depleted.
The use of adjustable speed generators utilizing wind power as input can become
a sustainable renewable energy resource in the coming future.
15. REFERENCES
[1] R. Pena, J. C. Clare, G. M. Asher, “Doubly-fed Induction Generator Using Back-to-back PWM Converters and Its
Application to Variable-speed Wind-energy Generation”, IEE hoc.-Electr. Power appl., Vol.143,no.3,pp.231-241,
1996.
[2] F. Blaabjerg, Z. Chen, and S. B. Kjaer, “Power electronics as efficient interface in dispersed power generation
systems”, IEEE Trans. Power Electron., Vol. 19, No. 5, pp. 1184–1194, Sep. 2004.
[3] T. Sun, Z. Chen, Frede Blaabjerg, “Voltage Recovery of Grid-connected Wind Turbines with DFIG After a Short-circuit
Fault”, 35th Annual IEEE Power Electronics Specialists Conference, 2004.
[4] http://www.intechopen.com/books
15