2. RoVent
®
Ventilatorenauswahlprogramm
Fan Selection Software
Mit unserem Auswahlprogramm RoVent ist eine betriebspunkt-
genaue Auswahl aus mehr aus 1.700 Ventilatorenmodellen
schnell und einfach möglich. Weiterhin steht Ihnen eine umfang-
reiche Dokumentation des ausgewählten Ventilatortyps zur Ver-
fügung. Durch regelmäßige Updates bleibt die Software ständig
auf dem aktuellsten Stand.
With our fan selection software RoVent an operating point specific
fan selection can be made quickly and easily from over 1.700 fan
models. Furthermore, detailed documentation on the selected fan
type is available. The software is kept up to date through regular
automatic updates.
Die RoVent CD-ROM erhalten Sie jederzeit kostenfrei von einer unserer Niederlassungen.
Alternativ steht die Software auch auf www.rosenberg-gmbh.com zum Download bereit.
You can receive the RoVent CD-ROM anytime free of charge from one of our subsidiaries.
Alternatively, it can be downloaded anytime from our website www.rosenberg-gmbh.com.
4. Eigenschaften und Ausführungen / Features and Constructions
Rosenberg Radialventilatoren mit freilaufendem Rad sind
hauptsächlich für den Geräteeinbau konzipiert und kommen
vorzugsweise in Klimageräten, Hygienegeräten, Reinraumfil-
tereinheiten sowie RLT-Anlagen zum Einsatz. Die Ventilatoren
sind zur Förderung von Luft und sonstigen, nicht aggressiven
Gasen oder Dämpfen bestimmt. Auf Anfrage sind weitere Va-
rianten möglich (z.Bsp. spez. Lackierung).
Als Antriebsmotoren werden Asynchron-Außenläufermotoren
oder elektronisch kommutierte (EC-) Außenläufermotoren ver-
wendet.
Abhängig von der Motorausführung und der mechanischen
Bauform sind die Ventilatoreinheiten lieferbar als:
• _KHR/RRE: Motorlaufrad ohne oder mit lose
beigefügter Einströmdüse (Außenläufermotor)
• _KHM/RRM: Ventilatoreinbaumodul
Bauform „Modul“ (Außenläufermotor)
• GKHS: Ventilatoreinbaumodul Bauform „Spinne“
(EC-Außenläufermotor)
• GKHB: Ventilatoreinbaumodul mit Montagebock
(EC-Außenläufermotor)
Sämtliche in diesem Katalog aufgeführten Ven-
tilatoren entsprechen der ErP 2015. Die Venti-
latoren wurden nach Genauigkeitsklasse 1 (DIN
24166) gemessen.
(AC-Typen entsprechen der Genauigkeitsklasse 3)
Laufräder
Die Laufräder mit rückwärtsgekrümmten Schaufeln sind zu-
sammen mit dem jeweils verwendeten Außenläufermotor
oder bei Verwendung von Motoren mit ausgeführter Welle mit
Laufradnabe entsprechend der Gütestufe G6.3 (bis Baugröße
400) und G2.5 (ab Baugröße 450) nach DIN ISO 1940 statisch
und dynamisch gewuchtet. Zu beachten ist bei der Laufrad-
baureihe B, dass die Laufradbaugröße nicht dem Laufradau-
ßendurchmesser entspricht. Bei Sonderprojekten können auch
andere Schaufelbreiten realisiert werden.
Drehrichtung
Die Drehrichtung der Laufräder ist serienmäßig rechts-drehend
(gesehen auf die Ansaugseite). Bei falscher Drehrichtung be-
steht Überlastungsgefahr für den Motor (bei EC Motoren mit
integrierter Elektronik nicht möglich). Daher sollte immer bei
der Inbetriebnahme die Drehrichtung überprüft werden.
Einströmdüse
Die Einströmdüsen bestehen aus verzinktem Stahlblech. Sie
sind strömungstechnisch optimiert und gewährleisten eine
gute Anströmung des Laufrades. Die optimale Eintauchtie-
fe der Einströmdüse ins Laufrad ist auf der entsprechenden
Zeichnung beschrieben. Über die im Lieferumfang enthaltene
Ringmessleitung beim GKHM/S/B kann eine Volumenstromü-
berwachung, -regelung erfolgen.
Rosenberg centrifugal fans with free-running impellers
were designed for installation in appliances such as air-hand-
ling-units, hygienic and clean room filter units, as well as for
RTL units. The fans are suitable for handling air and other non-
aggressive gases or fumes. More variants are possible on re-
quest (for ex. custom painting).
The motors are available as asynchronous external rotor mo-
tors or as electronically commutated (EC) external rotor mo-
tors.
Depending on the type of motor and the fan construction, the
following fans are available:
• _KHR/RRE: Motorized impeller with or
without inlet cone (external rotor motor)
• _KHM/RRM: Fan module type “module”
(external rotor motor)
• GKHS: Fan module type “spider“
(EC-external rotor motor)
• GKHB: Fan module with mounting stand
(EC-external rotor motor)
All the listed fans in this catalog correspond to
the ErP 2015. Fans are measured according to ac-
curacy class 1 (DIN 24166).
(AC types according to accuracy class 3)
Impellers
The impellers with backward curved blades are statically and
dynamically balanced with hubs according to quality level G6.3
(up to size 400) and G2.5 (from size 450) DIN ISO 1940. It
should be noted that, for this impeller range B, the impeller size
does not correspond to the external diameter of the impeller.
For special projects other blade widths can be manufactured.
Direction of Rotation
Proper direction of the rotation of the impellers viewed from
the inlet side is clockwise. Improper direction of rotation can
overload the motor (not possible with EC motors integrated
electronics); therefore it is essential to check the direction of
rotation before initial operation.
Inlet Cones
The inlet cones are made of galvanized steel sheet metal.
They are fluidic optimized and offer good air flow to the impel-
ler. The optimal immersion depth of the impeller is shown on
the corresponding dimensional drawings. Air flow control and
monitoring can be done through the circular lead included in
the scope of delivery of GKHM/S/B.
2
5. Eigenschaften und Ausführungen / Features and Constructions
1 2
3
4 4
5
2
Geräusche
Die Messungen und deren Darstellung erfolgt nach DIN
45635, Teil 38, bzw. ISO 13347-3 gemäß dem dort beschrie-
benen Hüllflächenverfahren, nach dem über eine quaderför-
mige Meßfläche mehrere Meßpunkte erfaßt werden. Nachfol-
gende Abbildung zeigt schematisch das Messsystem.
Noise Levels
The tests and their performance curves were conducted accor-
ding to DIN 45635, part 38, and ISO 133347-3 in accordance
with the envelope surface method, following data collection at
several test points over a square measuring area. The follow-
ing diagram shows the schematics of the measuring system.
In den jeweiligen Kennlinienfeldern ist der A-bewertete
Frei-Ausblas-Schallleistungspegel LW(A)8
nach ISO 3745
angegeben.
Für den typischen Einsatz im RLT-Gerät ist der Frei-Ausblas-
Schallleistungspegel LW(A)6
von Bedeutung, bei dem die an der
Ausblasöffnung abgestrahlte Schallleistung angegeben wird.
Bei einer sinnvollen Zuordnung von RLT-Gerätegröße und
Ventilatortyp kann dieser Wert näherungsweise bestimmt
werden.
LW(A)6
= LW(A)8
– 3 dB(A)
Der Freiansaug-Schalleistungspegel LW(A)5
kann typen-
spezifisch berechnet werden (siehe jeweilige Typenseite).
Der austrittseitig zu erwartenden A-Schalldruckpegel kann nur
annähernd ermittelt werden, da die Umgebungseinflüsse zu
starken Abweichungen führen können. Als Richtwert für den
Schalldruckpegel in 1m Abstand kann man folgende Bezie-
hung zugrunde legen:
LP(A) 1m
≈ LW(A)
– 7 dB
Für genauere Berechnungen bei Schallschutzmaßnamen ist
der Schalleistungpegel der Oktavbänder von Bedeutung.
LWokt
= LW(A)
+ LWrel
Grundsätzlich ist zu beachten, dass die örtlichen Geräusch-
werte unter Umständen stark von den Einbaubedingungen,
Reflexionen, der vorhandenen Raumakustik und weiteren Ein-
flussfaktoren beeinflusst werden können.
In the corresponding characteristic curve, the A-weighted
free-outlet sound power level LW(A)8
according to ISO 3745
is depicted.
The free-blowing-sound power level LW(A)6
is significant, for a
typical application with air handling unit modules where the
sound power level scattered at the outlet opening is indicated.
This value can be determined when air handling units and fans
are sensibly arranged:
LW(A)6
= LW(A)8
– 3 dB(A)
The free inlet sound power level LW(A)5
can be calculated
according to the formula on each fan type page.
The expected sound pressure level on the outlet side can only
be approximately determined as the ambient influences can
lead to strong deviations. The following formula can be used
to calculate the standard value of the sound power level at a
distance of 1m:
LP(A) 1m
≈ LW(A)
– 7 dB
For the exact determination of the sound protection require-
ment, the sound power level of the octave bands is important.
LWokt
= LW(A)
+ LWrel
It should be noted that sound levels may be strongly affected
by installation conditions, reflections, the acoustics of the
room and other influential factors.
1 Jalousieklappe / shutter door
2 Schalldämpfer / sound attenuator
3 Prüfling / test sample
4 Messgitter / measurement arrangement
5 Schallmessraum mit reflektierendem Boden /
sound chamber with reflecting floor
3
6. Einbauempfehlung in Gehäuse oder Kastenklimageräte
Wir empfehlen beim Einbau eines Radialventilators mit freilau-
fendem Rad in ein Gehäuse, das Einbauverhältnis.
Gehäuseinnenmaß A
≥ 1,6 einzuhalten
Laufradaußendurchmesser D
Das folgende Diagramm zeigt die Einbauverluste bei empfoh-
lenem und zu kleinem Einbauverhältnis:
Installation in Housings or Air Handling Units
When installing a centrifugal fan with a free-running impeller
into a housing, we recommend keeping the installation ratio
as follows:
Internal dimension of housing A
≥ 1,6
External dimension of impeller D
The following diagram shows installation-based pressure los-
ses when installed as recommended and also when the ratio
is too small:
Eigenschaften und Ausführungen / Features and Constructions
Die Einbauskizze stellt einen GKHM dar. Sinngemäß gilt glei-
ches auch für alle anderen Modelle dieses Kataloges.
1 Katalogkennlinie ohne Gehäuse:
100 % Nennluftleistung
2 Kennlinie bei A/D = 1,6
98 % Nennluftleistung
3 Kennlinie bei A/D = 1,2
92 % Nennluftleistung
Saugseitig und druckseitig sollte ein Mindestabstand von
0,5*D zu angrenzenden Bauteilen eingehalten werden. Damit
können Verluste vernachlässigt werden.
The installation diagram shows a GKHM. The same also ap-
plies for all other models of this catalog.
1 Catalog performance curve without housing:
100 % nominal air performance
2 Performance curve with A/D = 1,6
98 % nominal air performance
3 Performance curve with A/D = 1,2
92 % nominal air performance
On the intake and exhaust side a minimum distance of 0,5*D
to adjoining parts has to be kept. Losses on the pressure side
may be disregarded.
D
A
V[m³/h]
p[Pa]
1
2
3
3
2
1
3
2
1
4
7. Luftleistungskennlinien / Air Performance Curves
Luftleistungskennlinien
Die Luftleistungskennlinien wurden auf dem abgebildeten
saugseitigen Kammerprüfstand entsprechend DIN EN ISO
5801 aufgenommen. Sie zeigen die Druckerhöhung als Funk-
tion des Volumenstromes und gelten für Luft mit einer Dichte
von 1,2 kg/m³ und bei einer Temperatur von t=20°C. Die Kenn-
linien wurden in Einbauart A (frei saugend, frei ausblasend)
aufgenommen.
Achtung: Der Leistungsbedarf des Ventilators ändert sich line-
ar zur Dichte des Fördermediums.
Air Performance Curves
The air performance curves have been established using the
intake test method in the test chamber as shown below accor-
ding to DIN EN ISO 5801. They show pressure increase as a
function of the volume flow and are valid for air with a density
of 1,2 kg/m³ with a temperature of t=20°C. Performance cur-
ves were recorded in installation type “A” (free flowing intake
and exhaust).
Important note: Power consumption of fans change linearly
proportional to the density of conveyed air/gas.
6) Meßkammer mit Türen / measuring chamber with shutters
7) Wirkdruckanzeige pd mit Druckentnahmestelle / inlet cone pressure manometer (pd)
8) Druckanzeige Δpfa mit Druckentnahmestelle / pressure manometer Δpfa
9) Prüfling / tested fan
Prüfstand / Test chamber
1) Einlauf-Meßdüse mit Druckentnahme / inlet cone with pressure measurement device
2) Übergangsstücke, Anschlußstück / transition parts
3) Drosselvorrichtung mit Strömungsgleichrichter / throttling device with straightener
4) Bremssiebe / screens
5) Strömungsgleichrichter / straightener
5
8. EC-Radialventilatoren / EC Centrifugal fans
Laufrad / Wheel
Kunststofflaufrad mit EC-Motor /
wheel made of plastic
with EC drive
Kompakt-Hochleistungsstahllaufrad mit
EC-Motor / compact high efficiency
wheel made of steel with EC drive
Hochleistungsaluminiumlaufrad
mit EC-Motor / high efficiency wheel
made of aluminium with EC drive
Seite / Page 18 ⇒ 21 ⇒ 27 ⇒
Baugröße / Size Bauform / Construction
192 RRE , RRM
220 RRE , RRM
225 RRE , RRM RRE
250 RRE , RRM , GKHR GKHR , GKHM , GKHS
280 RRE , RRM , GKHR GKHR , GKHM , GKHS
315 GKHR , GKHM , GKHS
355 GKHR , GKHM , GKHS
400 GKHR , GKHM , GKHS
450 GKHR , GKHM , GKHS , GKHB
500 GKHR , GKHM , GKHS , GKHB
560 GKHR , GKHM , GKHB
630 GKHR , GKHM , GKHB
710 GKHB
Laufradtypen und Bauformen / Wheel Types and Constructions
Kurzbeschreibung der Bauformen / Short Description of Constructions
RRE / GKHR
Motorlaufrad (Einströmdüse als Zubehör)
Motorized impeller (inlet cone as accessory)
RRM / GKHM
Ventilatoreinbaumodul Bauform „Modul“
Fan module
GKHS
Ventilatoreinbaumodul Bauform „Spinne“
Fan module in spider construction
GKHB
Ventilatoreinbaumodul mit Montagebock
Fan module with mounting stand
EC
6
9. Laufradtypen und Bauformen / Wheel Types and Constructions
AC-Radialventilatoren / AC Centrifugal fans
Laufrad / Wheel
Kunststofflaufrad mit AC-Motor /
wheel made of plastic
with AC drive
Kompakt-Hochleistungsstahllaufrad mit
AC-Motor / compact high efficiency
wheel made of steel with AC drive
Hochleistungsaluminiumlaufrad
mit AC-Motor / high efficiency wheel
made of aluminium with AC drive
Seite / Page 66 ⇒ 72 ⇒ 76 ⇒
Baugröße / Size Bauform / Construction
133 RRE
180 RRE
192 RRE
220 RRE
225 RRE
250 RRE DKHR , DKHM
280 DKHR , DKHM
315 EKHR / DKHR , EKHM / DKHM
355 EKHR / DKHR , EKHM / DKHM
400 EKHR / DKHR , EKHM / DKHM
450 EKHR / DKHR , EKHM / DKHM
500 EKHR / DKHR , EKHM / DKHM
560 DKHR , DKHM
630 DKHR , DKHM
Kurzbeschreibung der Bauformen / Short Description of Constructions
RRE / EKHR / DKHR
Motorlaufrad (Einströmdüse als Zubehör)
Motorized impeller (inlet cone as accessory)
EKHM / DKHM
Ventilatoreinbaumodul Bauform „Modul“
Fan module
AC
7
15. Übersicht EKH_ / DKH_ / Overview EKH_ / DKH_
AC(50Hz)
13
20
25
18
17
21
15
12
11
22
19
1613
14
V[m3
/h]0 1000 2000 3000 4000 5000 6000 7000 8000 10000
0 1000 2000 3000 5000
[Pa]
fa
[in.WG]
fa
0
100
200
300
400
500
600
700
900
0.00
0.50
1.00
1.50
2.00
2.50
3.50
V[C.F.M.]
0.00 0.40 0.80 1.20 1.60 2.00 2.80V[m3
/s]
Spannung / Voltage: 3 ~ 400 V
Typ / Type: DKHR / DKHM
Motor / Motor: 080 , 106 , 137
Artikelnummern / Article numbers:
1)
ohne Einströmdüse / without inlet cone
2)
inklusive Einströmdüse ohne Ringmeßleitung / inclusive inlet cone without circular lead
3)
Einströmdüse ohne Ringmeßleitung / Inlet cone without circular lead
4)
Einströmdüse mit Ringmeßleitung / Inlet cone with circular lead
Nr.
No.
Typ / Type
Seite
Page
U [V]
Schaltbild
Wiring
diagram
Ausführung / Construction Zubehör / Accessory: DKHR
DKHR 1)
DKHM 2) Düse3)
/ Cone3)
Düse4)
/ Cone4)
17 DKH_ 450-4_B.125.5HA 91 3~400 01.006 N63-45302 N73-45307 Q51-45042 Q52-45042
17 DKH_ 450-G_B.125.5HA 91 400 D / Y 01.045 N63-45303 N73-45308 Q51-45042 Q52-45042
18 DKH_ 450-4_B.140.6FA 92 3~400 01.006 N63-45305 N73-45305 Q51-45042 Q52-45042
18 DKH_ 450-G_B.140.6FA 92 400 D / Y 01.045 N63-45306 N73-45306 Q51-45042 Q52-45042
19 DKH_ 450-6_B.125.5HA 93 3~400 01.006 N63-45307 N73-45313 Q51-45042 Q52-45042
19 DKH_ 450-H_B.125.5HA 93 400 D / Y 01.045 N63-45308 N73-45312 Q51-45042 Q52-45042
20 DKH_ 500-4_B.160.6LA 95 3~400 01.006 N63-50300 N73-50302 Q51-50042 Q52-50042
20 DKH_ 500-G_B.160.6LA 95 400 D / Y 01.045 N63-50301 N73-50303 Q51-50042 Q52-50042
21 DKH_ 500-6_B.140.6DF 96 3~400 01.006 N63-50304 N73-50304 Q51-50042 Q52-50042
21 DKH_ 500-H_B.140.6DF 96 400 D / Y 01.045 N63-50305 N73-50305 Q51-50042 Q52-50042
22 DKH_ 500-6_B.160.6DF 97 3~400 01.006 N63-50308 N73-50308 Q51-50042 Q52-50042
22 DKH_ 500-H_B.160.6DF 97 400 D / Y 01.045 N63-50309 N73-50309 Q51-50042 Q52-50042
23 DKH_ 560-4_B.160.7NA 98 3~400 01.006 N63-50310 N73-50310 Q51-56042 Q52-56042
23 DKH_ 560-G_B.160.7NA 98 400 D / Y 01.045 N63-50311 N73-50311 Q51-56042 Q52-56042
24 DKH_ 560-4_B.180.7KF 99 3~400 01.006 N63-56300 N73-56305 Q51-56042 Q52-56042
24 DKH_ 560-G_B.180.7KF 99 400 D / Y 01.045 N63-56301 N73-56300 Q51-56042 Q52-56042
25 DKH_ 560-6_B.180.6HF 100 3~400 01.006 N63-56306 N73-56306 Q51-56042 Q52-56042
25 DKH_ 560-H_B.180.6HF 100 400 D / Y 01.045 N63-56307 N73-56307 Q51-56042 Q52-56042
26 DKH_ 630-4_B.140.7NA 101 3~400 01.006 N63-63300 N73-63300 Q51-63042 Q52-63042
26 DKH_ 630-G_B.140.7NA 101 400 D / Y 01.045 N63-63301 N73-63301 Q51-63042 Q52-63042
27 DKH_ 630-6_B.160.6LA 102 3~400 01.006 N63-63308 N73-63308 Q51-63042 Q52-63042
27 DKH_ 630-H_B.160.6LA 102 400 D / Y 01.045 N63-63309 N73-63309 Q51-63042 Q52-63042
28 DKH_ 630-6_B.224.7NA 103 3~400 01.006 N63-63306 N73-63306 Q51-63042 Q52-63042
28 DKH_ 630-H_B.224.7NA 103 400 D / Y 01.045 N63-63307 N73-63307 Q51-63042 Q52-63042
[Pa]
fa
[in.WG]
fa
0
200
400
600
800
1000
1400
0.00
1.00
2.00
3.00
4.00
5.00
262428 23
27
0 2000 4000 6000 8000 10000 12000 16000
0 1000 2000 3000 4000 5000 6000 7000 9000V[C.F.M.]
V[m3
/h]
0.00 0.50 1.00 1.50 2.00 2.50 3.00 V[m3
/s] 4.00
Spannung / Voltage: 3 ~ 400 V
Typ / Type: DKHR / DKHM
Motor / Motor: 137 , 165
16. 14
EC-Radialventilatoren Typ GKH_ / EC Centrifugal Fans Type GKH_
Typenschlüssel
Type Code G K H R 500 - C I B . 160 . 6 IF IE (ROSENBERG)
Motortyp / Type of motor
G = EC-Motor / EC motor
Ausführung / Design
KH = Freilaufendes Rad mit Außenläufermotor /
Free running impeller with external rotor motor
Bauform / Construction type
R = Motorlaufrad / Motorized impeller
M = Ventilatoreinbaumodul / Fan module
S = Spinnenkonstruktion / Spider construction
B = Ventilatoreinbaumodul mit Montagebock /
Fan module with mounting stand
Radnenngröße / Impeller diameter
500 = 500mm
Statornutzahl / Stator lot no.
C = 12
Mechanische Ausführung / Mechanical design
I = Integrierte Leistungselektronik / Integrated electronics
E = Externe Leistungselektronik / External electronics
Radbaureihe / Type of wheel
B = Hochleistungslaufrad mit Diffusor / High efficiency wheel with diffuser
F = Kompakthochleistungslaufrad / Compact high efficiency wheel
Radbreite in mm / Width of wheel in mm
Motorbaugröße / Motor size
4 = GD84 , 5 = GD112 , 6 = GD150 , 8 = GD220
Paketlänge / Stack length
Verbesserter Systemwirkungsgrad / Improved system efficiency
EC
EC-Radialventilatoren / EC Centrifugal Fans
mit rückwärtsgekrümmten Radiallaufrädern /
with backward curved centrifugal wheels
17. 15
EC-Radialventilatoren Typ GKH_ / EC Centrifugal Fans Type GKH_
Vorteile
• schnelle Inbetriebnahme
(durch vorkonfiguriertes System)
• rückwärtsgekrümmtes Hochleistungslaufrad
• einfache Einregelung und Anpassung an die Anlage
• Drehzahl stufenlos steuerbar
• kompakte, raumsparende Bauart
• hohe Wirtschaftlichkeit durch EC-Antriebe
• gleichbleibend hoher Wirkungsgrad (auch bei Teillast)
• unabhängig von der Netzfrequenz (50/60Hz)
bei gleicher Leistung
• wartungsfreundlich, da kein Keilriemenverschleiß
Eigenschaften und Ausführungen
Die Rosenberg Radialventilatoren mit geräuschoptimiertem,
freilaufendem, rückwärtsgekrümmten Hochleistungslaufrad
bilden in Verbindung mit einem elektronisch kommutierten
Motor (EC-Motor) eine sehr kompakte, effiziente und kon-
struktiv optimale Ventilatoreinheit. Durch die aufeinander ab-
gestimmten Komponenten ist eine schnelle Inbetriebnahme
gewährleistet.
Als Antrieb werden EC-Motoren der Baugröße G9, L4, GD84,
GD112, GD150 mit integrierter Elektronik verwendet. Die
GKHB Baureihe ist mit einer externen EC-Elektronik und Mo-
toren der Baugröße GD150 und GD220 ausgestattet. Durch
diese Antriebskonzepte ist es möglich die Baureihe der frei-
laufenden Räder in einem Nennleistungsbereich von 0,12 bis
6,6 kW anzubieten. In Kombination mit eigens entwickelten
EC-Motoren, flexibler Laufradfertigung und leistungsfähiger
Blechverarbeitung bietet Rosenberg die Möglichkeit, Venti-
latoren zu fertigen, die einen größtmöglichen Kundennutzen
bieten und auf die konstruktiven Bedürfnisse der Kundenan-
wendung optimal abgestimmt sind.
Advantages
• fast start-up (due to pre-configured system)
• backward curved high efficiency impeller
• simple setting and adjusting of the complete system
• speed continuously controllable
• compact, space-saving design
• high operating efficiency due to EC drives
• constant high degree of efficiency
(even under partial load)
• independent of the supply frequency (50/60Hz), while
providing the same level of performance
• easy maintenance, due to lack of belt drive
deterioration
Features and Construction
Rosenberg centrifugal fans with noise optimized, backward
curved high efficiency free-running impellers combined with
electronically commutated motors (EC-motors), form a very
compact, efficient and design optimized fan unit. Fast startup
is ensured because of well-integrated components.
The fans are driven by EC (electronically commutated) motors
with sizes G9, L4, GD84, GD112, GD150 in conjunction with
integrated EC-electronics. The GKHB series is equipped with
GD150 and GD220 motors in conjunction with external EC-
electronics. With these drive approaches it is possible to of-
fer a free running impeller line with a performance range of
0,12 KW up to 6.6 KW. Custom designed EC motors, flexible
production of impellers and high end metal fabrication, gives
Rosenberg the capability to manufacture fans that provide the
best possible benefit to customers while taking the design de-
mands and the customer’s application into consideration.
Typenschlüssel
Type Code R R E u G9 225 x 50 R (ECOFIT)
Ventilatortyp / Fan type
RRE = Motorlaufrad / Motorized impeller
RRM = Ventilatoreinbaumodul / Fan module
UL-Ausführung / UL type
Motortyp / Motor type
G9 ; L4
Laufrad / Impeller
Raddurchmesser in mm x Radbreite in mm
Impeller diameter in mm x impeller width in mm
Drehrichtung / Rotation direction
R = rechtsdrehend / clockwise
EC
18. 16
EC-Radialventilatoren Typ GKH_ / EC Centrifugal Fans Type GKH_
Abhängig von der Baugröße sind die EC-Ventilatoreinheiten
lieferbar als:
GKHR / RRE
Motorlaufrad (Einströmdüse als Zubehör)
Motorized impeller (inlet cone as accessory)
GKHS
Ventilatoreinbaumodul Bauform „Spinne“
Fan module in spider construction
Aufbau und Wirkungsweise der EC-Motoren
Bei einem Rosenberg EC-Motor (EC = elektronisch kommu-
tiert) handelt es sich um einen permanenterregten Synchron-
motor in Außenläuferbauform. Durch einen Gleichrichter wird
die Netzwechselspannung in der Kommutierungselektronik in
eine Gleichspannung gewandelt. Dem Motor wird lageabhän-
gig über einen Wechselrichter die Motorspannung zur Verfü-
gung gestellt (ähnlich dem Prinzip eines Frequenzumrichters).
Abweichend zu einem Frequenzumrichter speist die EC-Elek-
tronik in Abhängigkeit der Lage, der Drehrichtung und der
Drehzahlvorgabe die Motorphasen im Stator (Kommutierung).
Im Rotor erzeugen Permanentmagnete ein magnetisches
Feld, welches zur Drehmomenterzeugung benötigt wird. Dies
macht eine hocheffiziente, kompakte, geräuscharme und stu-
fenlose Drehzahlsteuerbarkeit möglich.
Ein Montageflansch am Rotor wird zur Laufradaufnahme
verwendet. Durch Verwendung beidseitig geschlossener Ril-
lenkugellager mit speziell abgestimmter Fettung ist ein war-
tungsfreier und geräuscharmer Betrieb gewährleistet. Die
Wicklungsisolation entspricht der Wärmeklasse F.
Vergleichbar mit der Norm EN 60034-30 hat der Rosen-
berg EC-Motor einen Wirkungsgrad von IE4.
Motor- und Elektronikschutz
Die eingebauten Schutzeinrichtungen schützen den Ventilator
vor Fehlerzuständen und Überhitzung.
Signalisiert wird der Fehlerzustand beim G9 und L4 über den
open-collector Ausgang, bei den Motoren GD84, 112, 150,
220 über ein Alarmrelais.
Depending on the size, EC fan units can be delivered as:
GKHM / RRM
Ventilatoreinbaumodul Bauform „Modul“
Fan module
GKHB
Ventilatoreinbaumodul mit Montagebock
Fan module with mounting stand
Design and Operation of EC motors
Rosenberg EC-Motors (electronically commutated) are perma-
nently magnetized synchronous motors designed as external
rotor motors. A rectifier inside the electronics transforms the
alternating current (AC) voltage into direct current (DC) voltage.
Depending on the position of the rotor, the EC electronics pro-
vide the corresponding motor voltage to the motor (similar to
a frequency converter). Differing from a frequency converter,
the EC electronics energize the stator phases depending on
its position, direction of rotation and the speed requirement
(commutation). Permanent magnets inside the rotor create a
magnetic field, which is required to generate the torque. This
makes it possible to achieve highly efficient, compact, quiet
continuous speed control.
The impeller is mounted to the rotor with a flange. Through
the use of deep groove ball bearings, closed on both sides,
with specially paired grease lubricant, maintenance-free and
low-noise operation is guaranteed. The winding insulation cor-
responds to thermal Class F.
Compared to standard EN 60034-30 the Rosenberg EC
motor is rated to efficiency class IE4.
Motor and Electronic Protection
The integrated protection mechanisms safeguard the fan from
error statuses and overheating.
The G9 and L4 signal an error over an open-collector output,
the motors GD84, GD112, GD150 and GD220 through an
alarm relay.
EC
19. 17
EC-Radialventilatoren Typ GKH_ / EC Centrifugal Fans Type GKH_
Elektrischer Anschluss
EC-Motoren mit integrierter Elektronik der Baugrößen G9, L4
und GD84 besitzen Anschlusskabel. EC-Motoren mit integrier-
ter Elektronik der Baugröße GD112 und GD150 besitzen einen
integrierten Klemmraum. EC-Motoren mit externer Elektronik
der Baugröße GD150 und GD220 besitzen ein geschirmtes
Motoranschlusskabel welches beidseitig (am Motor und Elek-
tronik) aufgelegt ist. Netzseitig steht ein Klemmkasten zum
Anschluss bereit.
Der Versorgungsspannungsbereich, welcher für 50 und 60Hz
Netze ausgelegt ist, ermöglicht einen weiten Einsatzbereich.
Die Ventilatoren sind für den Einsatz an symmetrischen und
im Sternpunkt geerdeten Netzen konzipiert (TN-S, TN-C, TN-
C-S, TN Netze). Andere Spannungsversorgungsnetze sind
projektspezifisch zu prüfen.
In diesem Katalog sind alle Ventilatoren in der Betriebsart
Steuerbetrieb dargestellt.
Im Steuerbetrieb kann die Drehzahl des Ventilators durch
ein Sollwertvorgabe stufenlos gesteuert werden. Typspezi-
fisch kann die Sollwertvorgabe durch ein 0-10V Signal, einem
PWM-Signal oder über Modbus RTU Telegramme vorgege-
ben werden. Nähere Informationen siehe Schaltbilder ab Seite
49.
Bei der Betriebsart Regelbetrieb vergleicht der EC-Ventilator
den Soll-, und Istwert und verändert eigenständig die Dreh-
zahl in seinem möglichen Drehzahlbereich. Dies bedeutet,
wenn z.B. ein 3V Signal an Analog1 angeschlossen wird, er-
höht der Ventilator seine Drehzahl bis am Analog2 ebenfalls
3V anliegen. Dies kann z.B. für eine Konstantdruck-, oder Kon-
stantvolumenstromregelung verwendet werden. (siehe Appli-
kationsbeispiele Seite 56/57)
Die Umstellung der Betriebsart, bzw. das Umkonfigurieren der
Analogeingangscharakteristik oder das reduzieren der Nenn-
drehzahl kann über die Software ECParam erfolgen, oder kann
auch projektspezifisch individuell bestellt werden.
Hinweis zu Richtlinien
Rosenberg Radialventilatoren mit freilaufendem Rad und
EC-Motor-Antrieb entsprechen in ihrer Ausführung der EMV-
Richtlinie EMV 2004/108/EG, der Niederspannungsrichtlinie
2006/95/EG und der ErP-Richtlinie 2009/125/EG.
UL-Zulassung
Die Motoren der Baugröße G9, GD84, GD112 und GD150,
welche in den Ventilatoren Verwendung finden, sind nach UL
/ CSA anerkannt. Diese Typen sind auf den jeweiligen
Seiten mit dem „Recognized Component“ Logo ge-
kennzeichnet. Weitere Produkte sind projektspezi-
fisch zu prüfen.
Electrical Connection
EC motors with integrated electronics, size G9, L4 and GD84
have connection cables. EC motors with integrated electro-
nics, size GD112 and GD150 have an integrated junction box.
EC motors with external electronics size, GD150 and GD220
have a shielded motor cable which is placed on both sides (on
the motor and the electronics). For connection a terminal box
is available on the electronics.
The supply voltage range, which is designed for 50 and 60 Hz
networks, allows for a wide range of applications.
The fans are designed for use on symmetric and neutral point
grounded systems (TN-S, TN-C, TN-CS, TN networks). Other
power supply networks have to be checked for specific pro-
jects.
In this catalogue, all fans are shown in open-loop control.
In open-loop control, the fan speed can be controlled continu-
ously by a preselected target value. Depending on the specific
type the preselected target value can be defined by a 0-10 V
signal, a PWM signal or Modbus RTU telegrams. Additional
information can be found in wiring diagrams from page 49.
In closed-loop control, the EC fan compares the set point to
the actual value and adjusts the speed independently within
its possible speed range. This means if, e.g., a 3V signal is
connected to Analog1, the fan increases its speed up to 3V
on Analog2 to match it. For example, this can be used for a
constant pressure or constant volume flow control. (see appli-
cation samples page 56/57)
The change of operating mode, reconfiguring the analog input
characteristics or reducing the nominal speed can be done by
the software program ECParam, or can also be ordered indivi-
dually for specific projects.
Reference to Directives
Rosenberg EC centrifugal fans with free running impellers
meet in their design the EMV-Directive EMV 2004/108/
EG, Low Voltage Directive 2006/95/EC and ErP Directive
2009/125/EC.
UL Component Recognation
The motor sizes G9, GD84, GD112, GD150, which are used
in the fan types, are UL / CSA recognized. These types are
marked on the respective pages with the „Recognized
Component Mark“. Additional products have to be
checked for specific projects.
EC
20. 18
RRE/RRM
Baugröße / Size : 192
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -19 -8 -7 -6 -6 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -18 -9 -7 -6 -5 -8 -17
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
800
0.00
0.50
1.00
1.50
2.00
3.00
0
0 100 200 300 400 500 600 800
0 50 100 150 200 250 300 350 450V[C.F.M.]
V[m3
/h]
0.00 0.025 0.05 0.075 0.10 0.125 0.15 V[m3
/s] 0.20
10V8V6V4V
76 dB(A)
79
76
80
74
70
71
74
66
62
63
6654 50 51 53
Technische Daten / Technical data: Geräusche / Sound levels:
LW(A)5
= LW(A)8
- 4 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
RRE
[kg]
RRM
RR_(u)G9 192x40R 1 ~ 200-240 50 / 60 0.14 1.15 3990 122 50 IP4x 01.436 1.2 1.5
RR_uG9 192x40R [*]
1 ~ 100-120 50 / 60 0.14 2.07 3990 140 60 IP4x 01.436 1.75 2.05
Ø 107,5
Ø 105
Ø 115
Ø 97,7
Ø 80
40
80
6
60
900
Ø 58
4 x M4 x 7
4 x M4
Ø132
Ø192
70
77,5 / [*]:86
17,5 / [*]:26
13,5 / [*]:22
+1
-1
+10
-10
+20
-20
Maße / Dimensions : [mm]
13
202
267,5
Ø 265
4 x Ø 6
4 x M4 x 7
Cutting area
4 x Ø 6 Ø 240
R 124,5
Ø124,5
112,5
2,5
R 139,5
01.436
EC-fan with integrated electronics X1:
mains cable
PE green-yellow
1 brown
2 blue
Tacho
Output
Open
Collector
X2:
control cable
5 black
6 yellow
7 orange
8 white
9 grey
ANALOGUEMains
X1:
1
2
X2:
6
6
6
7
7
55
5
8
9
PE
Umax = 10V
Imax = 10 mA
- 1 Puls per rpm
- Short circuit protection
U(V) 0-10V
< 1,5V n=0
1,5 V n=min
10V n=max
PWM 1kHz - 10kHz
< 15% n=0
15% n=min
100% n=max
Schaltbild / Wiring diagram:
RRE RRM
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
21. 19
RRE/RRM
Baugröße / Size : 220
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
800
0.00
0.50
1.00
1.50
2.00
3.00
0
V[m3
/h]0 200 400 600 800 1200
0 100 200 300 400 500 600
1400
V[C.F.M.] 800
0.00 0.05 0.10 0.15 0.20 0.25 0.30 V[m3
/s] 0.40
10V8V6V
4V
78 dB(A)
81
79
81
77
77
76
78
70
70
69
71
56 56 55 57
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
RRE
[kg]
RRM
RR_(u)G9 220x45R 1 ~ 200-240 50 / 60 0.145 1.19 3395 122 50 IP4x 01.436 1.6 2.8
RR_uG9 220x45R [*]
1 ~ 100-120 50 / 60 0.145 1.93 3395 140 60 IP4x 01.436 1.8 3.0
Geräusche / Sound levels:
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -19 -8 -7 -6 -6 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -18 -9 -7 -6 -5 -8 -17
LW(A)5
= LW(A)8
- 4 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
Ø 107,5
Ø 105
Ø 58
4 x M4 x 7
4 x M4
Ø 115
Ø 97,7
Ø 80
80
77,5 / [*]:86
17,5 / [*]:26
13,5 / [*]:22
71
+10
-10
+1
-1
6
900
+20
-20
Ø159
Ø220
45
63
Maße / Dimensions : [mm]
Ø 305
R 144
Ø 58
Ø149,5
4 x Ø 6
4 x M4 x 6
Ø 105
241
21
122
85,5
Cutting area
267,5
+1
-1
R 159,5
Schaltbild / Wiring diagram:
RRE RRM
01.436
EC-fan with integrated electronics X1:
mains cable
PE green-yellow
1 brown
2 blue
Tacho
Output
Open
Collector
X2:
control cable
5 black
6 yellow
7 orange
8 white
9 grey
ANALOGUEMains
X1:
1
2
X2:
6
6
6
7
7
55
5
8
9
PE
Umax = 10V
Imax = 10 mA
- 1 Puls per rpm
- Short circuit protection
U(V) 0-10V
< 1,5V n=0
1,5 V n=min
10V n=max
PWM 1kHz - 10kHz
< 15% n=0
15% n=min
100% n=max
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
22. 20
RRE/RRM
Baugröße / Size : 225
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
800
0.00
0.50
1.00
1.50
2.00
3.00
0
V[m3
/h]0 200 400 600 800 1200
0 100 200 300 400 500 600
1400
V[C.F.M.] 800
0.00 0.05 0.10 0.15 0.20 0.25 0.30 V[m3
/s] 0.40
10V8V6V4V
77 dB(A)
80
78
80
75
76
76
78
68 69
68
7156 57 57 59
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
RRE
[kg]
RRM
RR_(u)G9 225x63R 1 ~ 200-240 50 / 60 0.150 1.19 2780 122 50 IP4x 01.436 1.7 3.0
RR_uG9 225x63R [*]
1 ~ 100-120 50 / 60 0.150 2.01 2780 140 60 IP4x 01.436 1.7 3.0
Geräusche / Sound levels:
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -19 -8 -7 -6 -6 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -18 -9 -7 -6 -5 -8 -17
LW(A)5
= LW(A)8
- 4 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
Ø 58
4 x M4 x 6
4 x M4
Ø 107,5
Ø 105 Ø 115
Ø 97,7
Ø 80
63
6
900
90
77,5 / [*]:86
17,5 / [*]:26
13,5 / [*]:22
99+1
-1
+20
-20
80+10
-10
Ø159
Ø225
Maße / Dimensions : [mm]
Ø 305
R 144
21
80
900
6
135,5
77,5
99
Ø 58
241
267,5
Ø149,5
4 x Ø 6
4 x M4 x 7
Cutting area
+10
-10
+20
-20
+1
-1
R 159,5
Schaltbild / Wiring diagram:
RRE RRM
01.436
EC-fan with integrated electronics X1:
mains cable
PE green-yellow
1 brown
2 blue
Tacho
Output
Open
Collector
X2:
control cable
5 black
6 yellow
7 orange
8 white
9 grey
ANALOGUEMains
X1:
1
2
X2:
6
6
6
7
7
55
5
8
9
PE
Umax = 10V
Imax = 10 mA
- 1 Puls per rpm
- Short circuit protection
U(V) 0-10V
< 1,5V n=0
1,5 V n=min
10V n=max
PWM 1kHz - 10kHz
< 15% n=0
15% n=min
100% n=max
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
23. 21
RRE
Baugröße / Size : 225
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -24 -7 -6 -7 -9 -9 -10
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -16 -8 -6 -7 -8 -9 -11
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
800
0.00
0.50
1.00
1.50
2.00
3.00
0
V[m3
/h]0 200 400 600 800 1200
0 100 200 300 400 500 600
1400
V[C.F.M.] 800
0.00 0.05 0.10 0.15 0.20 0.25 0.30 V[m3
/s] 0.40
10V8V6V4V
75 dB(A)
79
75
79
73
71
72
74
65 63
64
6654 52 52 54
Technische Daten / Technical data: Geräusche / Sound levels:
LW(A)5
= LW(A)8
- 5 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
RRE
[kg]
RRM
RRE(u)G9 225x50R 1 ~ 200-240 50 / 60 0.121 1.0 3350 122 50 IP4x 01.436 1.7 -
RREuG9 225x50R [*]
1 ~ 100-120 50 / 60 0.116 1.81 3375 140 60 IP4x 01.436 1.7 -
Ø 58
Ø 107,5
Ø 105
Ø 97,7
Ø 80
50
80
900
77,3
Ø 115
Ø159
Ø227
4 x M4 x 6
4 x M4
99
77,5 / [*]:86
17,5 / [*]:26
13,5 / [*]:22
6
+1
-1
+10
-10
+20
-20
Maße / Dimensions : [mm]
Schaltbild / Wiring diagram:
RRE
01.436
EC-fan with integrated electronics X1:
mains cable
PE green-yellow
1 brown
2 blue
Tacho
Output
Open
Collector
X2:
control cable
5 black
6 yellow
7 orange
8 white
9 grey
ANALOGUEMains
X1:
1
2
X2:
6
6
6
7
7
55
5
8
9
PE
Umax = 10V
Imax = 10 mA
- 1 Puls per rpm
- Short circuit protection
U(V) 0-10V
< 1,5V n=0
1,5 V n=min
10V n=max
PWM 1kHz - 10kHz
< 15% n=0
15% n=min
100% n=max
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
24. 22
RRE/RRM
Baugröße / Size : 250
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -24 -7 -6 -7 -9 -9 -10
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -16 -8 -6 -7 -8 -9 -11
[Pa]
fa
[in.WG]
fa
0
100
200
300
400
500
700
0.00
0.40
0.80
1.20
1.60
2.00
2.80
0 200 400 600 800 1000 1200 1600
0 100 200 300 400 500 600 700 900V[C.F.M.]
V[m3
/h]
0.00 0.50 0.10 0.15 0.20 0.25 0.30 V[m3
/s] 0.40
10V8V6V
4V2V
75 dB(A)
78
74
78
73
70
72
73
69 66
68
69
63 61
62
6451 49 50
52
Technische Daten / Technical data: Geräusche / Sound levels:
LW(A)5
= LW(A)8
- 5 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
RRE
[kg]
RRM
RR_L4 250x50R 1 ~ 230 50 / 60 0.166 0.73 3000 113 45 IP4x 01.440 2.5 5.0
Ø 58
Ø 90
Ø 78
Ø 133
Ø 110
50
80
900
80,8
39,5
117
99
3,5
3
6
Ø174,8
Ø252
Ø 125
4 x M5
4 x M4 x 8
+1
-1
+10
-10
+20
-20
Maße / Dimensions : [mm]
Ø 58
Ø 110
Ø206
Ø166
Ø 78
340
350
Ø 90
1,5
39,5
3
6
125
117
90.1
4 x M4 x 8
4 x M5 x 8
4 x Ø 11
+1
-1
80
900
+10
-10
+20
-20
400
40
Schaltbild / Wiring diagram:
RRE RRM
01.440
EC-fan with integrated electronics X1:
mains cable
PE green-yellow
1 brown
2 blue
Alarm
0V OK
15V ERROR
X2:
control cable
5 black
6 yellow
7 orange
8 white
9 grey
ANALOGUEMAINS
X1:
1
2
X2:
66
6
7
7
55
5
9
PE
U(V) 0-10V
< 0,5V n=0
0,5 V n=min
10V n=max
PWM - 10V
0,5 kHz - 10 kHz
< 5% n=0
5% n=min
100% n=max
+15 V
GND
X2:5
Tacho Output
Open Collector
1 pulse per
revolution
8
+15 V
GND
X2:5
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
25. 23
RRE/RRM
Baugröße / Size : 280
0 250 500 750 1000
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
800
0.00
0.50
1.00
1.50
2.00
3.00
0
1500 V[m3
/h]
V[C.F.M.]
20001250
250 500 1000
0.00 0.05 0.10 0.15 0.20 0.25 0.350.30 V[m3
/s]0.40 0.50
0
10V8V6V4V2V
77 dB(A)
77
80
81
77
76
76
78
73
72
72
74
67 66
66
6851 50 50 52
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
RRE
[kg]
RRM
RR_L4 280x50R 1 ~ 230 50 / 60 0.21 0.93 2805 113 45 IP4x 01.440 4.9 5.3
Geräusche / Sound levels:
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -24 -7 -6 -7 -9 -9 -10
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -16 -8 -6 -7 -8 -9 -11
LW(A)5
= LW(A)8
- 5 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
Ø 58 Ø 90
117
3,5
3
6
39,5
80
Ø 133
4 x M4 x 8 4 x M5 x 8
Ø 90
Ø 78
4 x M5
Ø 133
Ø 110
50
85
112
900
Ø281
Ø196,4
+1
-1
+20
-20
+10
-10
Maße / Dimensions : [mm]
Ø 58
117
133
98 1,5
45
6
7
80
900
85
98
3
Ø 110
Ø 78
340
Ø 90
4 x M4 x 84 x M5 x 8
Ø186
+10
-10
+1
-1
+20
-20
4 x Ø 11350
400
Schaltbild / Wiring diagram:
RRE RRM
01.440
EC-fan with integrated electronics X1:
mains cable
PE green-yellow
1 brown
2 blue
Alarm
0V OK
15V ERROR
X2:
control cable
5 black
6 yellow
7 orange
8 white
9 grey
ANALOGUEMAINS
X1:
1
2
X2:
66
6
7
7
55
5
9
PE
U(V) 0-10V
< 0,5V n=0
0,5 V n=min
10V n=max
PWM - 10V
0,5 kHz - 10 kHz
< 5% n=0
5% n=min
100% n=max
+15 V
GND
X2:5
Tacho Output
Open Collector
1 pulse per
revolution
8
+15 V
GND
X2:5
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
26. 24
GKHR / GKHM
Baugröße / Size : 250
01.434
X2 Steuerkabel /
control cable
5 braun / brown
6 schwarz / black
7 gelb / yellow
8 blau / blue
9 grün / green
10 violett / violett
11 rot /red
12 orange / orange
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
X1: Netzkabel / mains cable Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -21 -8 -5 -6 -10 -10 -12
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -27 -11 -5 -7 -7 -9 -11
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
GKH_ 250-CIF.056.4EA 1 ~ 200-277 50 / 60 0.43 2.7 1)
3240 122 50 IP54 01.434 a) 4.6 10.3
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
LW(A)5
= LW(A)8
- 5 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
V[C.F.M.]200 400 600
V[m3
/h]0 200 400 600 800 1000 1200 1400 1800
1000
2000
0.00 0.10 0.20 0.30 0.50V[m3
/s]
0
[Pa]
fa
[in.WG]
fa
0
100
200
3240
2700
2300
300
400
500
600
700
0.00
0.50
1.00
1.50
2.00
2.50
3.50
900
81
80
79
77
78
76
7273
77
79
75
72
68
6869
65
63
64
82
80
78
75
71
66
1900
1550
3000
Ø164
4 x M6
158
122
86,8
2,5
38,4
1,5
56
38,5
Ø251,4
Ø150
Ø206
Ø290
Ø7
Ø259(6x60°)
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
GKHM
GKHR
23,5 173 290
Ø11
390
430
27. 25
GKHR / GKHM
Baugröße / Size : 280
01.434
X2 Steuerkabel /
control cable
5 braun / brown
6 schwarz / black
7 gelb / yellow
8 blau / blue
9 grün / green
10 violett / violett
11 rot /red
12 orange / orange
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
X1: Netzkabel / mains cable Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -21 -8 -5 -6 -10 -10 -12
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -27 -11 -5 -7 -7 -9 -11
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
GKH_ 280-CIF.050.4EA 1 ~ 200-277 50 / 60 0.47 2.7 1)
3200 104 40 IP54 01.434 a) 5.0 10.5
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
LW(A)5
= LW(A)8
- 5 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
0 500 1000
3200
2950
2650
1500 2500V[m3
/h]
200 400 600 800 1000 V[C.F.M.] 1400
0.00 0.10 0.20 0.30 0.40 0.50 0.70V[m3
/s]
[Pa] fa
[in.WG]
fa
0
100
200
300
400
500
600
700
800
0
0.00
0.50
1.00
1.50
2.00
2.50
3.00
4.001000
86
83
80
81
76
6869
72
77
73
81
84
85
82
83
79
75
71
67
84
82
78
74
70
2250
1850
1500
Ø164
4 x M6
161,5
121
38,4
86
2,8
1,5
43,5
50
Ø282
Ø150
Ø228
Ø307
Ø7
Ø286(6x60°)
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
GKHM
GKHR
23,5 176 320
Ø11
390
430
28. 26
GKHR / GKHM
Baugröße / Size : 280
01.434
X2 Steuerkabel /
control cable
5 braun / brown
6 schwarz / black
7 gelb / yellow
8 blau / blue
9 grün / green
10 violett / violett
11 rot /red
12 orange / orange
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
X1: Netzkabel / mains cable Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -21 -8 -5 -6 -10 -10 -12
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -27 -11 -5 -7 -7 -9 -11
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
GKH_ 280-CIF.080.4EA 1 ~ 200-277 50 / 60 0.48 2.8 1)
2750 104 40 IP54 01.434 a) 5.1 11
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
LW(A)5
= LW(A)8
- 5 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
[Pa]
fa
[in.WG]
fa
0
100
200
300
400
500
600
800
0.00
0.40
0.80
1.20
1.60
2.00
2.40
3.20
0 200 400 600 800 1000 1200 V[C.F.M.] 1600
0 500 1000 1500
1300
1600
1930
2530
2750
2000 V[m3
/h] 3000
0.00 0.10 0.20 0.30 0.40 0.50 0.60 V[m3
/s] 0.80
87
8282
83
84
81
79
75
71
67
80
80
76
78
74
70
66
85
83
79
75
71
72
68
2250
Ø164
4 x M6
191,5
151
38,4
116
2,8
1,5
43,5
80
Ø282
Ø150
Ø228
Ø307
Ø7
Ø286(6x60°)
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
GKHM
GKHR
23,5 206 320
Ø11
390
430
29. 27
GKHR / GKHM / GKHS
Baugröße / Size : 250
01.434
X2 Steuerkabel /
control cable
5 braun / brown
6 schwarz / black
7 gelb / yellow
8 blau / blue
9 grün / green
10 violett / violett
11 rot /red
12 orange / orange
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
X1: Netzkabel / mains cable Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -30 -10 -6 -5 -7 -10 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -21 -7 -4 -7 -9 -13 -19
0 500 1000 1500 2500V[m3
/h]
200 400 600 800 1000 V[C.F.M.] 1400
0.00 0.10 0.20 0.30 0.40 0.50 0.70V[m3
/s]
0
dB(A)
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
800
0.00
0.50
1.00
1.50
2.00
3.00
0
2850
2600
2350
2000
1650
1350
82
81
80
82
80
79
78
80
78
77
76
78
74
73
72
74
70 69
68
70
66 65
64
66
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 250-CIB.080.4EA IE 1 ~ 200-277 50 / 60 0.48 2.8 1)
2850 104 40 / 60*
IP54 01.434 a) 5.2 11 11
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
80
117
1,5
3,2
168
204,8
38,4
40
90°
Ø 164
M6 x 7 mm
Tiefe / depth
Ø7
Ø283
Ø150
Ø197
Ø280
Ø259(6x60°)
23,5 220 290
Ø11
390
430
GKHS GKHM
GKHR
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Düsenbeiwert / Calibration factor : k10
= 48
Ø11
243,5
ausgeführtes Kabel mit 0,8m Länge /
ausgeführtes Kabel mit 0,8m Länge
Maße / Dimensions : [mm]
*)
60°C nur mit Drehzahlreduzierung auf 2360 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 2360 min-1
(8,0V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
30. 28
01.434
X2 Steuerkabel /
control cable
5 braun / brown
6 schwarz / black
7 gelb / yellow
8 blau / blue
9 grün / green
10 violett / violett
11 rot /red
12 orange / orange
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
X1: Netzkabel / mains cable Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
[Pa]
fa
[in.WG]
fa
0 500 1000 1500 2000 2500 V[m3
/h] 3500
0
100
200
300
400
500
700
0 500 1000 V[C.F.M.] 2000
0.00
0.40
0.80
1.20
1.60
2.00
2.80
0.00 0.10 0.20 0.30 0.40 0.50 0.700.60 V[m3
/s]0.80 1.00
dB(A)
2400
2250
2000
1700
1400
1150
80
79
78
80
78
77
76
78
76
75
74
76
72
71
70
72
68 67
66
68
64 63
62
64
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 280-CIB.090.4EA IE 1 ~ 200-277 50 / 60 0.52 3.1 1)
2400 104 40 / 60*
IP54 01.434 a) 5.3 11.5 11.5
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
90
M6 x 7 mm
Tiefe / depth
131
181
Ø 164
222,4
38,4
45 4x90°
3,6
1,5
Ø7
Ø286(6x60°)
Ø220
Ø307
Ø318
Ø150
23,5
Ø11
237,5
320
390
430
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 66
Ø11
261
ausgeführtes Kabel mit 0,8m Länge /
ausgeführtes Kabel mit 0,8m Länge
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -8 -5 -7 -8 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -29 -11 -6 -5 -6 -11 -17
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
*)
60°C nur mit Drehzahlreduzierung auf 1990 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 1990 min-1
(8,0V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 280
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
31. 29
01.437
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
Geräteausschalter /
On / Off - switch
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
0 500 1000 1500 2000 3000 V[m3
/h]
V[C.F.M.]
40002500
500 1000 2000
0.00 0.10 0.20 0.30 0.40 0.50 0.700.60 V[m3
/s]0.80 1.00
[Pa]
fa
[in.WG]
fa
0
200
400
600
800
1200
0.00
1.00
2.00
3.00
4.00
0
dB(A)
86
3000
2800
2500
2100
1750
1450
85
84
87
84 83
82
85
82
81
80
83
78 77
76
79
74 73
72
75
70 69
68
71
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 280-CIB.090.5FA IE 1 ~ 200-277 50 / 60 1.1 6.3 1)
3000 104 40 / 60*
IP54 01.437 a) 10 16 16
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
90
64
131
Ø 202
202,2
243,6
3,6
1,5
45
M6 x 18mm Tiefe
depth
Ø7
Ø220
Ø307
4x90°
45°
Ø286(6x60°)
Ø318
Ø180
3x M20 x 1,5
49
Ø11
259
320
390
430
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 66
Ø11
308
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -8 -5 -7 -8 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -28 -9 -6 -5 -7 -10 -21
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
*)
60°C nur mit Drehzahlreduzierung auf 2490 min-1
(8,1V) möglich / 60°C only possible with speed reduction to 2490 min-1
(8,1V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 280
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
32. 30
01.390
0 500 1000 1500 2000 3000 V[m3
/h]
V[C.F.M.]
35002500
500 1000 1500
4500
2500
0.00 0.20 0.40 0.60 0.80 1.20V[m3
/s]
0
[Pa]
fa
[in.WG]
fa
200
400
600
800
1000
1200
1600
0.00
1.00
2.00
3.00
4.00
6.00
0
dB(A)
3500
3250
2900
2450
2050
1650
89
88
87
90
87
86
85
88
85 84
83
86
81 80
79
82
77 76
75
78
73 72
71
74
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 280-CIB.090.5FA IE 3 ~ 380-480 50 / 60 1.6 2.5 1)
3500 104 40 / 60*
IP54 01.390 a) 10 16 16
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
90
64
131
Ø 202
202,2
243,6
3,6
1,5
45
M6 x 18mm Tiefe
depth
Ø7
Ø220
Ø307
4x90°
45°
Ø286(6x60°)
Ø318
Ø180
3x M20 x 1,5
49
Ø11
259
320
390
430
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 66
Ø11
308
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -8 -5 -7 -8 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -28 -9 -6 -5 -7 -10 -21
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
*)
60°C nur mit Drehzahlreduzierung auf 2900 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 2900 min-1
(8,0V)
1)
bei 400V (50Hz) / at 400V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 280
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
33. 31
01.434
X2 Steuerkabel /
control cable
5 braun / brown
6 schwarz / black
7 gelb / yellow
8 blau / blue
9 grün / green
10 violett / violett
11 rot /red
12 orange / orange
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
X1: Netzkabel / mains cable Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
dB(A)
76
1850
1700
1500
1300
1100
850
74
75
77
74
72
73
75
71
69
70
72
68 66
67
69
65 63
64
66
59 57
58
60
0 500 1000 1500 2000 2500 V[m3
/h] 3500
500 1000 V[C.F.M.] 2000
0.00 0.10 0.20 0.30 0.40 0.50 0.700.60 V[m3
/s]0.80 1.00
0
[Pa]
fa
[in.WG]
fa
0
100
200
300
400
600
0.00
0.50
1.00
1.50
2.00
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 315-CIB.100.4EA IE 1 ~ 200-277 50 / 60 0.43 2.5 1)
1850 104 40 / 60*
IP54 01.434 a) 6 14 16
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
100
Ø 164146
196
242,9
Ø360
Ø248
Ø348
Ø320(6x60°)
Ø150
51 90°
M6 x 7 mm
Tiefe / depth
1,5
4,1
Ø7
23,5
Ø11
258
360
450
500
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 75
Ø11
281,5
ausgeführtes Kabel mit 0,8m Länge /
ausgeführtes Kabel mit 0,8m Länge
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -19 -9 -8 -7 -5 -8 -17
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -15 -10 -8 -5 -6 -10 -19
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
*)
60°C nur mit Drehzahlreduzierung auf 1540 min-1
(8,1V) möglich / 60°C only possible with speed reduction to 1540 min-1
(8,1V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 315
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
34. 32
01.437
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
Geräteausschalter /
On / Off - switch
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
0 500 1000 1500 2000 3000 V[m3
/h]
V[C.F.M.]
35002500
500 1000 1500
4500
2500
0.00 0.20 0.40 0.60 0.80 1.20V[m3
/s]
0
[Pa]
fa
[in.WG]
fa
0
100
200
300
400
500
600
700
0.00
0.50
1.00
1.50
2.00
2.50
3.50
900
dB(A)
84
2400
2200
1950
1700
1400
1150
83
82
86
82
81
80
84
79
78
77
81
77
76
75
79
72 71
70
74
68 67
66
70
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 315-CIB.100.5FA IE 1 ~ 200-277 50 / 60 1.0 6.2 1)
2400 104 40 / 60*
IP54 01.437 a) 10.5 18.5 18.5
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
100
M6 x 18mm Tiefe
depth
4x90°
45°
146
Ø 202
217,2
264,1
51
1,5
4,1
Ø7
Ø180
Ø360
Ø248
Ø348
Ø320(6x60º)
3x M20 x 1,5
49
Ø11
279
360
450
500
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 75
*)
60°C nur mit Drehzahlreduzierung auf 1990 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 1990 min-1
(8,0V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
Ø11
328
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -8 -5 -7 -8 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -28 -9 -6 -5 -7 -10 -21
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 315
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
35. 33
01.390
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 315-CIB.100.5FA IE 3 ~ 380-480 50 / 60 1.6 2.6 1)
2900 104 40 / 60*
IP54 01.390 a) 10.5 18.5 18.5
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 75
*)
60°C nur mit Drehzahlreduzierung auf 2400 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 2400 min-1
(8,0V)
1)
bei 400V (50Hz) / at 400V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -8 -5 -7 -8 -9 -15
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -28 -9 -6 -5 -7 -10 -21
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
[Pa]
fa
[in.WG]
fa
0
200
400
2900
2400
2050
1700
1400
600
800
1000
1400
0.00
1.00
2.00
3.00
4.00
5.00
2700
0 1000 2000 3000 4000 6000V[m3
/h]
500 1000 1500 2000 2500 3000 3500
0.00 0.20 0.40 0.60 0.80 1.00 1.20 V[m3
/s] 1.60
0
88
87
86
90
86
83
88
84
85
82
79
75
70
86
84
81
77
72
83
79
75
79
74
71
100
M6 x 18mm Tiefe
depth
4x90°
45°
146
Ø 202
217,2
264,1
51
1,5
4,1
Ø7
Ø180
Ø360
Ø248
Ø348
Ø320(6x60º)
3x M20 x 1,5
49
Ø11
279
360
450
500
Ø11
328
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
GKHR / GKHM / GKHS
Baugröße / Size : 315
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
36. 34
01.437
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
Geräteausschalter /
On / Off - switch
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 355-CIB.112.5FA IE 1 ~ 200-277 50 / 60 1.1 6.61)
2050 104 40 / 60*
IP54 01.437 a) 11 21 25
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 97
*)
60°C nur mit Drehzahlreduzierung auf 1700 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 1700 min-1
(8,0V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -7 -6 -6 -7 -12 -16
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -24 -7 -7 -5 -7 -12 -17
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
0 1000 2000 3000 4000 6000V[m3
/h]
500 1000 1500 2000 2500 3000 3500
0.00 0.20 0.40 0.60 0.80 1.00 1.20 V[m3
/s] 1.60
[Pa]
fa
[in.WG]
fa
0
100
200
300
400
500
600
700
900
0
0
0.50
1.00
1.50
2.00
2.50
3.50
86
84
81
82
80
79
79
76
71
71
74
77
72
68
6970
78
73
82
83
81
83
84
85
2050
1700
1450
1200
1000
1900
112 57
45°
M6 x 18mm Tiefe
depth1,5
4,664
163
286
Ø 202
233,7
Ø7
Ø405
Ø180
Ø280
4x90°
Ø382
Ø356(6x60°)
3x M20 x 1,5
49
Ø11
301,5
450
500
395
Ø11
GKHR / GKHM / GKHS
Baugröße / Size : 355
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
37. 35
01.390
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
V[m3
/h]0 1000 2000 3000 4000 6000
0 500 1000 1500 2000 2500 3000
7000
V[C.F.M.] 4000
[Pa]
fa
[in.WG]
fa
0
200
400
600
800
1200
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.50
0.00 0.25 0.50 0.75 1.00 1.25 1.50 V[m3
/s] 2.00
2400
2200
1950
1700
1400
1150
88
87
86
89
86
85
84
87
83 82
81
84
81 80
79
82
76 75
74
77
72 71
70
73
dB(A)
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 355-CIB.112.5HF IE
3 ~ 380-480 50 / 60 1.7 2.9 1)
2400 104 40 / 60*
IP54 01.390 a) 13 23 27
3 ~ 200-240 50 / 60 1.5 3.9 2)
2300 104 40 / 60*
IP54 01.390 a) 13 23 27
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
112 57
45°
M6 x 18mm Tiefe
depth1,5
4,664
163
286
Ø 202
233,7
Ø7
Ø405
Ø180
Ø280
4x90°
Ø382
Ø356(6x60°)
3x M20 x 1,5
49
Ø11
301,5
450
500
395
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 97
*)
60°C nur mit Drehzahlreduzierung auf 1910 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 1910 min-1
(8,0V)
1)
bei 400V (50Hz) / at 400V (50Hz) 2)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
Ø11
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -23 -7 -6 -6 -7 -12 -16
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -24 -7 -7 -5 -7 -12 -17
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 355
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
38. 36
01.390
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
0 1000 2000 3000 4000 5000 6000 8000
0 500 1000 1500 2000 2500 3000 3500 4500V[C.F.M.]
V[m3
/h]
[Pa]
fa
[in.WG]
fa
0
200
400
600
800
1000
1200
1400
0.00
1.00
2.00
3.00
4.00
5.00
7.00
1800
0.00 0.25 0.50 0.75 1.00 1.25 1.50 V[m3
/s] 2.00
dB(A)
3000
2800
2500
2100
1750
1450
95 94
94
95
93
92
92
93
91
90
90
91
87
86
86
87
83 82
82
83
79 78
78
79
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 355-CIB.112.6FF IE
3 ~ 380-480 50 / 60 3.3 4.8 1)
3000 104 40 / 60*
IP54 01.390 a) 21 31 32
3 ~ 200-240 50 / 60 3.0 7.8 2)
2900 104 40 / 60*
IP54 01.390 a) 21 31 32
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
112
163
263,5
315,9
Ø405
Ø235-1,5
Ø280
Ø382
Ø356(6x60°)
57
Ø 252
M10 x 25mm
Tiefe / depth
8 x 45°
1,5
4,6
70
Ø7
3x M20 x 1,5
54,5
Ø11
331,5
395
450
500
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 102
Ø11
386
*)
60°C nur mit Drehzahlreduzierung auf 2410 min-1
(8,1V) möglich / 60°C only possible with speed reduction to 2410 min-1
(8,1V)
1)
bei 400V (50Hz) / at 400V (50Hz) 2)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -29 -9 -7 -5 -6 -11 -16
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -29 -9 -8 -4 -6 -13 -18
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
GKHR / GKHM / GKHS
Baugröße / Size : 355
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
39. 37
125
183
Ø 202
252,2
310
Ø455
Ø180
Ø313
Ø422
Ø395(8x45°)
63
4x90°
45°
M6 x 18mm Tiefe
depth (Ø 202)
5,2
2
64
Ø9
3x M20 x 1,5
49
Ø11
325 420
450
500
GKHS GKHM
GKHR
Ø11
381374
500
450
Maße / Dimensions : [mm]
01.437
EC-Ventilator mit integrierter Elektronik
EC-fan with integrated electronics
Geräteausschalter /
On / Off - switch
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
Schaltbild / Wiring diagram:
GKHR / GKHM / GKHS
Baugröße / Size : 400
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 400-CIB.125.5FA IE 1 ~ 200-277 50 / 60 1.1 6.4 1)
1700 104 40 / 60*
IP54 01.437 a) 11.5 22 24
Geräusche / Sound levels:
Düsenbeiwert / Calibration factor : k10
= 102
*)
60°C nur mit Drehzahlreduzierung auf 1400 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 1400 min-1
(8,0V)
1)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -12 -10 -8 -7 -6 -9 -14
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -16 -8 -7 -5 -8 -10 -17
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
V[m3
/h]0 1000 2000 3000 4000 5000 7000
0 500 1000 1500 2000 2500 3000 4000
[Pa]
fa
[in.WG]
fa
100
200
300
400
500
600
1700
1200
1000
800
800
0.00
0.50
1.00
1.50
2.00
3.00
0
0.00 0.20 0.40 0.60 0.80 1.00 1.401.20 V[m3
/s]1.60 2.00
1400
1600
V[C.F.M.]
82
80
81
77
73
69
65
80
79
83
79
75
71
67
82
76
72
78
74
70
66
68
64
81
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
40. 38
GKHR / GKHM / GKHS
Baugröße / Size : 400
01.390
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
V[m3
/h]0 1000 2000 3000 4000 5000 7000
0 500 1000 1500 2000 2500 3500 4000
[Pa] fa
[in.WG]
fa
0
100
200
300
400
500
600
700
800
1000
0.00
0.50
1.00
1.50
2.00
2.50
3.00
4.00
dB(A)
1920
1750
1550
1350
1100
900
85
83
83
86
83 81
81
84
80
78
78
81
77 75
75
78
73 71
71
74
69 67
67
70
V[C.F.M.]
0.00 0.20 0.40 0.60 0.80 1.00 1.401.20 V[m3
/s]1.60 2.00
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 400-CIB.125.5HF IE
3 ~ 380-480 50 / 60 1.5 2.4 1)
1920 104 40 / 60*
IP54 01.390 a) 13.5 24 26
3 ~ 200-240 50 / 60 1.5 3.9 2)
1920 104 40 / 60*
IP54 01.390 a) 13.5 24 26
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
125
183
Ø 202
252,2
310
Ø455
Ø180
Ø313
Ø422
Ø395(8x45°)
63
4x90°45°
M6 x 18mm Tiefe
depth (Ø 202)
5,2
2
64
Ø9
3x M20 x 1,5
49
Ø11
325 420
450
500
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 136
Ø11
381374
500
450
*)
60°C nur mit Drehzahlreduzierung auf 1620 min-1
(8,2V) möglich / 60°C only possible with speed reduction to 1620 min-1
(8,2V)
1)
bei 400V (50Hz) / at 400V (50Hz) 2)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -12 -10 -8 -7 -6 -9 -14
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -16 -8 -7 -5 -8 -10 -17
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC
41. 39
GKHR / GKHM / GKHS
Baugröße / Size : 400
01.390
Betriebsart / Operation mode
a) Steuerbetrieb / open-loop control
Betriebsart / Operation mode
b) Regelbetrieb / closed-loop control
Die Umstellung der Betriebs-
art ist durch Umparametrie-
rung des EC-Motors an der
RS 485 Schnittstelle mög-
lich! / Changing operation
mode requires re-configu-
ration of motor parameters
via RS 485 interface!
dB(A)
2600
2400
2150
1850
1550
1250
94 93
93
96
92
91
91
94
90
89
89
92
87 86
86
89
83 82
82
85
78 77
77
80
V[m3
/h]0 1000 2000 3000 4000 5000 6000 7000 8000 10000
0 1000 2000 3000 5000
[Pa]
fa
[in.WG]
fa
0
200
400
600
800
1000
1200
1400
1800
0.00
1.00
2.00
3.00
4.00
5.00
7.00
V[C.F.M.]
0.00 0.40 0.80 1.20 1.60 2.00 2.80V[m3
/s]
Technische Daten / Technical data:
Ventilatortyp / FanType
U
[V]
f
[Hz]
P
[kW]
IN
[A]
n
[min-1
]
tR
[°F]
tR
[°C]
[kg]
GKHR
[kg]
GKHM
[kg]
GKHS
GKH_ 400-CIB.125.6FF IE
3 ~ 380-480 50 / 60 3.5 5.3 1)
2600 104 40 / 60*
IP54 01.390 a) 21.5 38 36
3 ~ 200-240 50 / 60 3.3 8.6 2)
2500 104 40 / 60*
IP54 01.390 a) 21.5 38 36
Geräusche / Sound levels:
Schaltbild / Wiring diagram:
125
Ø 252
8 x 45°
183 M10 x 25mm
Tiefe / depth2
281,5
339,3
Ø455
Ø313
Ø422
Ø395(8x45°)
63
5,270
Ø9
Ø235-1,5
3x M20 x 1,5
55
Ø11
355
470
500
550
GKHS GKHM
GKHR
Düsenbeiwert / Calibration factor : k10
= 136
Ø11
410
381
*)
60°C nur mit Drehzahlreduzierung auf 2070 min-1
(8,0V) möglich / 60°C only possible with speed reduction to 2070 min-1
(8,0V)
1)
bei 400V (50Hz) / at 400V (50Hz) 2)
bei 230V (50Hz) / at 230V (50Hz)
60Hz-Daten siehe Tabelle Seite 58 / 60Hz data please see table on page 58
LWArel A-bewertet bei V=0,5*Vmax
LWArel A-weighted at V=0,5*Vmax
fM [Hz]
125 250 500 1K 2K 4K 8K
LWA5 [dB(A)] Ansaugseite / inlet side -29 -9 -7 -5 -6 -11 -16
LWA6 / LWA8 [dB(A)] Ausblasseite / outlet side -29 -9 -8 -4 -6 -13 -18
LW(A)5
= LW(A)8
- 7 dB
LW(A)6
= LW(A)8
- 3 dB
LW(A)5okt
= LW(A)5
+ LW(A)5rel
LW(A)6okt
= LW(A)6
+ LW(A)6rel
LW(A)8okt
= LW(A)8
+ LW(A)8rel
Maße / Dimensions : [mm]
• schnelle Inbetriebnahme
• integrierte Regelung (EC-Controller)
• rückwärtsgekr. Hochleistungslaufrad
• einfache Einregelung und Anpassung
an die Anlage
• Drehzahl stufenlos steuerbar
• unabhängig von der Netzfrequenz
(50/60Hz) bei gleicher Leistung
• fast start-up
• integrated control system (EC controller)
• backward curved high efficiency impeller
• simple setting and adjusting of the
complete system
• speed continuously controllable
• independent of the supply frequency
(50/60Hz), while providing the same level
of performance
LW(A)8
ist in der Luftleistungskennlinie dargestellt
is displayed in air performance curve
EC