Hochspannende Aufbereitung von Erzen:
Erfolgreicher Abschluss des ELIZE Forschungsprojekts:
Elektroimpulszerkleinerung für den Aufschluss komplexer Erze
MABEWO AG: Energiespeicherung durch Batterienolik88
Die Lithium Ionen Technik mit deren Speicherkapazität sind Herausforderungen für die Elektromobilität. Die Speichertechnologie ist der Schlüssel der Energiewende. Technologischer Fortschritt für nachhaltige Lösungen zur Speicherung von Energie, wo sie direkt gebraucht wird, steht im Fokus.
MABEWO AG: Energiespeicherung durch Batterienolik88
Die Lithium Ionen Technik mit deren Speicherkapazität sind Herausforderungen für die Elektromobilität. Die Speichertechnologie ist der Schlüssel der Energiewende. Technologischer Fortschritt für nachhaltige Lösungen zur Speicherung von Energie, wo sie direkt gebraucht wird, steht im Fokus.
Mit dem Umbau der Uhlandschule in Stuttgart-Zuffenhausen zur Plusenergieschule zeigt die Landeshauptstadt Stuttgart gemeinsam mit ihren Partnern das technisch Machbare bei der energetischen Gebäudesanierung. Der
gesamte Energiebedarf soll durch Nutzung lokal verfügbarer erneuerbarer Energiequellen gedeckt werden. Das Projekt soll 2013 fertig sein.
Niagara Pelletizing Disc Scarabaeus 7500 for Iron Ore Pellets ProductionHaver Niagara
Experience with SCARABAEUS® 7500 in Pelletizing of Iron Ores - Industry 4.0 in harsh industrial environments - innovative solution for sustainable and efficient production of iron ore pellets with sizes 9-14 mm
MABEWO AG: Energiespeicherung durch Batterienolik88
Die Lithium Ionen Technik mit deren Speicherkapazität sind Herausforderungen für die Elektromobilität. Die Speichertechnologie ist der Schlüssel der Energiewende. Technologischer Fortschritt für nachhaltige Lösungen zur Speicherung von Energie, wo sie direkt gebraucht wird, steht im Fokus.
MABEWO AG: Energiespeicherung durch Batterienolik88
Die Lithium Ionen Technik mit deren Speicherkapazität sind Herausforderungen für die Elektromobilität. Die Speichertechnologie ist der Schlüssel der Energiewende. Technologischer Fortschritt für nachhaltige Lösungen zur Speicherung von Energie, wo sie direkt gebraucht wird, steht im Fokus.
Mit dem Umbau der Uhlandschule in Stuttgart-Zuffenhausen zur Plusenergieschule zeigt die Landeshauptstadt Stuttgart gemeinsam mit ihren Partnern das technisch Machbare bei der energetischen Gebäudesanierung. Der
gesamte Energiebedarf soll durch Nutzung lokal verfügbarer erneuerbarer Energiequellen gedeckt werden. Das Projekt soll 2013 fertig sein.
Niagara Pelletizing Disc Scarabaeus 7500 for Iron Ore Pellets ProductionHaver Niagara
Experience with SCARABAEUS® 7500 in Pelletizing of Iron Ores - Industry 4.0 in harsh industrial environments - innovative solution for sustainable and efficient production of iron ore pellets with sizes 9-14 mm
CROSSBEAM WEAR PROTECTION FOR YOUR SCREENING MACHINEHaver Niagara
HAVER-Snap-Guard® is a patented crossbeam
wear protection system. In combination
with the crossbeam system the Snap-Guard®
elements are easy to install. Snap-Guard®
wear protection components are standardized
and compatible with the HAVER crossbeam
system.
HB17 LUBRICANT SOLUTION by Haver & Boecker NiagaraHaver Niagara
More than 75% of all damage is related to using
the wrong lubricant. Lubricants are the life blood of your vibrating screens. Understanding the special requirements of vibrating screen technology, we developed the new age lubricant solution HB17. Made with the latest generation calcium complex soap, HB17 has improved properties regarding thermal stability, water resistance, load carrying capacity and corrosion protection.
Shakerballs: small and well hidden, but decisive for your screening performanceHaver Niagara
The shaker balls prevent the clogging of particles
in the screen cloth. Additional requencies are
transmitted in the screen mesh. Due to the
cleaning effect the optimum or requested
screening result can be achieved.
EQUIPMENT FOR THE CLASSIFICATION AND CRUSHING SECTION IN FERTILIZER PRODUCTIONHaver Niagara
The paper includes an analysis of the most common grain-size raw material preparation schemes applicable in the mineral processing. Factors influencing the optimal management of the crushing process are clarified and authors’ and other installations to regulate this process are presented. Based on this, a variant for equipment for the crushing and sieving sections, tested in practice, is presented.
Environmental protection with profit: Granulation of powdered coalHaver Niagara
This paper addresses the subject of coal dust. This is often captured in dedusting systems to avoid emissions with the associated impairment and hazards. Studies at HAVER ENGINEERING GmbH have shown that processing of the powdered coal fraction to non-dusting particle sizes can be realized simply in technical terms.
Green Mining – does it work? - Editorial Haver Niagara
The managing director of Haver & Boecker Niagara Peter Grotjohann keeps the editorial of World of Mining (teh new edition) with the title Green Mining-does it works?
Техника и технологии классификации минеральных удобренийHaver Niagara
HAVER NIAGARA входит в состав головной компании HAVER & BOECKER.
Основная компетенция HAVER NIAGARA заключается в поиске решений для заказчика в вопросах классификации, промывки/дезинтеграции и окомкования. Здесь мы предлагаем комплексные решения, отвечающие индивидуальным пожеланиям заказчика.
Линейка продукции HAVER NIAGARA предлагает необходимые технологические цепочки для отраслей горнодобывающей промышленности, химической промышленности, строительной отрасли, переработки отходов и вторичного сырья.
Компания HAVER NIAGARA производит оборудование для горнодобывающей промышленности, которое может включать в себя индивидуальные решения, состоящие как из отдельных машин, так и из производственных комплексов "под ключ".
В кооперации с заказчиком, с ведущими инжиниринговыми компаниями и проектными институтами мы получаем оптимальные решения, чтобы полностью удовлетворить пожелания заказчика.
Мы завоёвываем доверие наших клиентов с помощью технически обоснованных решений.
Haver Niagara: Digitalbasierte Optimierungen und die Sache mit dem nützlichen...Haver Niagara
Erfahren Sie, wie Sie Ihre Anlagen mit modernen digitalen Lösungen optimieren können und finden Sie eine neue Alternative von den teueren Deckkonventierungen - mit Haaken versehene Siebmedien.
Simulation of Mineral Processing Plants with „NIAflow®“Haver Niagara
NIAflow is a simulation software for all kinds of mineral processing applications. With its intuitive graphical interface it can model and calculate entire plants. NIAflow supports dry and wet crushing, screening and sorting processes .
NIAflow makes it easy to design processes and optimize your profit. The graphical interface allows the creation of your process in a simple and intuitive way. Whether you are dealing with existing plants or new projects, you can test different settings and scenarios right away. Thus saving you time and money to setup your machinery. NIAflow's user selectable detailing level stores all plant related data in one spot. With its comprehensive print and documenting features you will have all information at your fingertips.
This article describes plant modelling with NIAflow® and the use of its models in various scenarios.
Intelligent combination - Ultrafine sizing of silica sand with the HAVER FINE...Haver Niagara
The following paper addresses the problems of dry mechanical screen sizing of ultrafine silica sand. These problems are examined in detail following some basic remarks on the process sequence, evaluation of a screening process and the sizing equipment available for this purpose.
Equipment concept - Optimizing the production of crushed sand for dry-mix mor...Haver Niagara
The production of dry-mix mortar aggregate requires effective interaction of
suitable comminution and sizing machines. For this purpose, experimental tests on pilot or
large-scale are essential. Of considerable importance for the design of the plant configuration
is also consideration of the influence of mineralogical-petrographic rock properties of
the raw material deposit, in order to develop for the plant operator a flexible equipment
concept for long operating lifetime with high equipment availability.
Хавер Ниагара ГмбХ: Опыт обогащения минерального сырьяHaver Niagara
Структура компании
Линейка продукции HAVER NIAGARA GmbH
Примеры с постановкой задач и опыт обогащения минерального сырья (применяемое оборудование, комплексные решения) - Презентацию на конгрессе обогатителей стран СНГ в Москве
Washing systems by HAVER & BOECKER NIAGARAHaver Niagara
A central task in mineral processing technology involves cleaning the feed material to remove adhering fine mineral particles and to dissolve any agglomerates that it may contain.
The HYDRO-CLEAN® by HAVER NIAGARA GmbH is an innovative high pressure washing system where the dirty raw material is subjected to a rotating water jet generated by a wash rotor. In a processing step the coarse dirt is removed and components that can be slurried are separated from the desired product. The system’s cleaning performance has proven itself in a number of applications worldwide.
Prof. Dr.-Ing. H. Lieberwirth of the TU Bergakademie Freiberg is leading research into using high-voltage pulses for comminution processes as a more sustainable alternative to conventional methods. About 7% of global energy production is used for comminution, which rarely exceeds 1% energy efficiency. Recent research has focused on using high-voltage pulses to weaken materials along grain boundaries before mechanical comminution, which shows promise. Some advantages include continuous operation, making smaller or more complex deposits economically viable, higher recovery and concentrate quality from preferential weakening, significant energy savings compared to conventional methods, reduced wear without moving parts, and recovery of valuable elements from slags.
Optimization of Mineral Processing Plants with Simulation Software „NIAflow“Haver Niagara
The document discusses using a digital twin simulation software called NIAflow to optimize mineral processing plants. A digital twin is a digital replica of a physical asset that can be used for various purposes like testing modifications. The simulation model represents the real plant's machinery and processes. It is connected to real plant data and behaves the same way. This allows modifications to be tested without incurring capital or production costs. The document provides an example of optimizing a mineral processing plant in 3 steps - modeling, verification, and optimization - to increase throughput while meeting production specifications. Modifications like screen changes allowed the plant's capacity to be increased by 20%.
Making more products, reducing waste and cutting costs-converted
What does the customer really want when he buys cement? What impact do his needs have on the cement producers? What technologies will the cement producer require to fulfill his customer’s needs? These are questions Haver & Boecker, the Cement Specialists headquartered in Oelde, Germany are answering by designing the Cement Plant of the Future in pursuit of perfect flow of products, processes and services. The future of Cement will look different and Haver & Boecker aims to play a big role in forming it.
Making more products, reducing waste and cutting costs in the quarry
Haver Niagara: The new gold, fertilizer as an alternative to the weak mining ...Haver Niagara
Let us discuss about the new approaches to the granulation of mineral fertilizer and to look to the future in the fertilizer insdustry with confidence thanks to the expert silutions of haver niagara screening technology.
Innovative und effiziente Aufbereitungstechniken - Von der Entwicklung zur A...Haver Niagara
Produzenten von Ausgangsstoffen für die Bau- und Grundstoffindustrie müssen zunehmend Rohstoffe verarbeiten, deren Verschmutzungsgrad den Einsatz von Nassverfahren erfordert. Ebenso wird die Aufbereitung von Haldenmaterialien zur Sicherung der Rohstoffverfügbarkeit zukünftig weiter an Bedeutung gewinnen. Diese Aspekte werden in der Regel von einem dramatischen Anstieg der Kosten für die gesamte Wasserhaltung sowie der Energiekosten begleitet. . Der Umweltaspekt kommt verstärkend hinzu, da unter den heutigen Bedingungen eine großzügige Entnahme von Frischwasser in den seltensten Fällen möglich ist.
HAVER & BOECKER Niagara ist seit Jahrzehnten mit ihrer Sieb- und Reinigungstechnik auf dem Gebiet der Aufbereitungstechnik sowohl im Trocken- als auch im Nassbereich bekannt. Auf Ihre Teilnahme an der 11. Deutsch-Russischen Rohstoff Konferenz stellte sie innovative und effiziente Lösungen dieser Heransforderungen durch die Anwendung energie- und ressourcenschonender Prozess- und Maschinentechniken.
CROSSBEAM WEAR PROTECTION FOR YOUR SCREENING MACHINEHaver Niagara
HAVER-Snap-Guard® is a patented crossbeam
wear protection system. In combination
with the crossbeam system the Snap-Guard®
elements are easy to install. Snap-Guard®
wear protection components are standardized
and compatible with the HAVER crossbeam
system.
HB17 LUBRICANT SOLUTION by Haver & Boecker NiagaraHaver Niagara
More than 75% of all damage is related to using
the wrong lubricant. Lubricants are the life blood of your vibrating screens. Understanding the special requirements of vibrating screen technology, we developed the new age lubricant solution HB17. Made with the latest generation calcium complex soap, HB17 has improved properties regarding thermal stability, water resistance, load carrying capacity and corrosion protection.
Shakerballs: small and well hidden, but decisive for your screening performanceHaver Niagara
The shaker balls prevent the clogging of particles
in the screen cloth. Additional requencies are
transmitted in the screen mesh. Due to the
cleaning effect the optimum or requested
screening result can be achieved.
EQUIPMENT FOR THE CLASSIFICATION AND CRUSHING SECTION IN FERTILIZER PRODUCTIONHaver Niagara
The paper includes an analysis of the most common grain-size raw material preparation schemes applicable in the mineral processing. Factors influencing the optimal management of the crushing process are clarified and authors’ and other installations to regulate this process are presented. Based on this, a variant for equipment for the crushing and sieving sections, tested in practice, is presented.
Environmental protection with profit: Granulation of powdered coalHaver Niagara
This paper addresses the subject of coal dust. This is often captured in dedusting systems to avoid emissions with the associated impairment and hazards. Studies at HAVER ENGINEERING GmbH have shown that processing of the powdered coal fraction to non-dusting particle sizes can be realized simply in technical terms.
Green Mining – does it work? - Editorial Haver Niagara
The managing director of Haver & Boecker Niagara Peter Grotjohann keeps the editorial of World of Mining (teh new edition) with the title Green Mining-does it works?
Техника и технологии классификации минеральных удобренийHaver Niagara
HAVER NIAGARA входит в состав головной компании HAVER & BOECKER.
Основная компетенция HAVER NIAGARA заключается в поиске решений для заказчика в вопросах классификации, промывки/дезинтеграции и окомкования. Здесь мы предлагаем комплексные решения, отвечающие индивидуальным пожеланиям заказчика.
Линейка продукции HAVER NIAGARA предлагает необходимые технологические цепочки для отраслей горнодобывающей промышленности, химической промышленности, строительной отрасли, переработки отходов и вторичного сырья.
Компания HAVER NIAGARA производит оборудование для горнодобывающей промышленности, которое может включать в себя индивидуальные решения, состоящие как из отдельных машин, так и из производственных комплексов "под ключ".
В кооперации с заказчиком, с ведущими инжиниринговыми компаниями и проектными институтами мы получаем оптимальные решения, чтобы полностью удовлетворить пожелания заказчика.
Мы завоёвываем доверие наших клиентов с помощью технически обоснованных решений.
Haver Niagara: Digitalbasierte Optimierungen und die Sache mit dem nützlichen...Haver Niagara
Erfahren Sie, wie Sie Ihre Anlagen mit modernen digitalen Lösungen optimieren können und finden Sie eine neue Alternative von den teueren Deckkonventierungen - mit Haaken versehene Siebmedien.
Simulation of Mineral Processing Plants with „NIAflow®“Haver Niagara
NIAflow is a simulation software for all kinds of mineral processing applications. With its intuitive graphical interface it can model and calculate entire plants. NIAflow supports dry and wet crushing, screening and sorting processes .
NIAflow makes it easy to design processes and optimize your profit. The graphical interface allows the creation of your process in a simple and intuitive way. Whether you are dealing with existing plants or new projects, you can test different settings and scenarios right away. Thus saving you time and money to setup your machinery. NIAflow's user selectable detailing level stores all plant related data in one spot. With its comprehensive print and documenting features you will have all information at your fingertips.
This article describes plant modelling with NIAflow® and the use of its models in various scenarios.
Intelligent combination - Ultrafine sizing of silica sand with the HAVER FINE...Haver Niagara
The following paper addresses the problems of dry mechanical screen sizing of ultrafine silica sand. These problems are examined in detail following some basic remarks on the process sequence, evaluation of a screening process and the sizing equipment available for this purpose.
Equipment concept - Optimizing the production of crushed sand for dry-mix mor...Haver Niagara
The production of dry-mix mortar aggregate requires effective interaction of
suitable comminution and sizing machines. For this purpose, experimental tests on pilot or
large-scale are essential. Of considerable importance for the design of the plant configuration
is also consideration of the influence of mineralogical-petrographic rock properties of
the raw material deposit, in order to develop for the plant operator a flexible equipment
concept for long operating lifetime with high equipment availability.
Хавер Ниагара ГмбХ: Опыт обогащения минерального сырьяHaver Niagara
Структура компании
Линейка продукции HAVER NIAGARA GmbH
Примеры с постановкой задач и опыт обогащения минерального сырья (применяемое оборудование, комплексные решения) - Презентацию на конгрессе обогатителей стран СНГ в Москве
Washing systems by HAVER & BOECKER NIAGARAHaver Niagara
A central task in mineral processing technology involves cleaning the feed material to remove adhering fine mineral particles and to dissolve any agglomerates that it may contain.
The HYDRO-CLEAN® by HAVER NIAGARA GmbH is an innovative high pressure washing system where the dirty raw material is subjected to a rotating water jet generated by a wash rotor. In a processing step the coarse dirt is removed and components that can be slurried are separated from the desired product. The system’s cleaning performance has proven itself in a number of applications worldwide.
Prof. Dr.-Ing. H. Lieberwirth of the TU Bergakademie Freiberg is leading research into using high-voltage pulses for comminution processes as a more sustainable alternative to conventional methods. About 7% of global energy production is used for comminution, which rarely exceeds 1% energy efficiency. Recent research has focused on using high-voltage pulses to weaken materials along grain boundaries before mechanical comminution, which shows promise. Some advantages include continuous operation, making smaller or more complex deposits economically viable, higher recovery and concentrate quality from preferential weakening, significant energy savings compared to conventional methods, reduced wear without moving parts, and recovery of valuable elements from slags.
Optimization of Mineral Processing Plants with Simulation Software „NIAflow“Haver Niagara
The document discusses using a digital twin simulation software called NIAflow to optimize mineral processing plants. A digital twin is a digital replica of a physical asset that can be used for various purposes like testing modifications. The simulation model represents the real plant's machinery and processes. It is connected to real plant data and behaves the same way. This allows modifications to be tested without incurring capital or production costs. The document provides an example of optimizing a mineral processing plant in 3 steps - modeling, verification, and optimization - to increase throughput while meeting production specifications. Modifications like screen changes allowed the plant's capacity to be increased by 20%.
Making more products, reducing waste and cutting costs-converted
What does the customer really want when he buys cement? What impact do his needs have on the cement producers? What technologies will the cement producer require to fulfill his customer’s needs? These are questions Haver & Boecker, the Cement Specialists headquartered in Oelde, Germany are answering by designing the Cement Plant of the Future in pursuit of perfect flow of products, processes and services. The future of Cement will look different and Haver & Boecker aims to play a big role in forming it.
Making more products, reducing waste and cutting costs in the quarry
Haver Niagara: The new gold, fertilizer as an alternative to the weak mining ...Haver Niagara
Let us discuss about the new approaches to the granulation of mineral fertilizer and to look to the future in the fertilizer insdustry with confidence thanks to the expert silutions of haver niagara screening technology.
Innovative und effiziente Aufbereitungstechniken - Von der Entwicklung zur A...Haver Niagara
Produzenten von Ausgangsstoffen für die Bau- und Grundstoffindustrie müssen zunehmend Rohstoffe verarbeiten, deren Verschmutzungsgrad den Einsatz von Nassverfahren erfordert. Ebenso wird die Aufbereitung von Haldenmaterialien zur Sicherung der Rohstoffverfügbarkeit zukünftig weiter an Bedeutung gewinnen. Diese Aspekte werden in der Regel von einem dramatischen Anstieg der Kosten für die gesamte Wasserhaltung sowie der Energiekosten begleitet. . Der Umweltaspekt kommt verstärkend hinzu, da unter den heutigen Bedingungen eine großzügige Entnahme von Frischwasser in den seltensten Fällen möglich ist.
HAVER & BOECKER Niagara ist seit Jahrzehnten mit ihrer Sieb- und Reinigungstechnik auf dem Gebiet der Aufbereitungstechnik sowohl im Trocken- als auch im Nassbereich bekannt. Auf Ihre Teilnahme an der 11. Deutsch-Russischen Rohstoff Konferenz stellte sie innovative und effiziente Lösungen dieser Heransforderungen durch die Anwendung energie- und ressourcenschonender Prozess- und Maschinentechniken.
Innovative und effiziente Aufbereitungstechniken - Von der Entwicklung zur A...
2020 02 23 elize final
1. Hochspannende Aufbereitung von Erzen
Erfolgreicher Abschluss des ELIZE Forschungsprojekts:
Elektroimpulszerkleinerung für den Aufschluss komplexer Erze
Am 01. Juli 2016 startete das Verbundvorhaben ELIZE. Das Ziel dieses
Forschungsprojekts war die Entwicklung einer kontinuierlich arbeitenden Maschine mit
Elektroimpulsbeanspruchung zur Vorschädigung komplexer Erze. Dieses Ziel wurde
erfolgreich umgesetzt. Im Rahmen des Projektes ist am Institut für
Aufbereitungsmaschinen (IAM) der TU Bergakademie Freiberg eine einzigartige Elektro-
Impuls-Pilotanlage mit einer Durchsatzkapazität von bis zu 500 kg/h Ausgangsmaterial
entstanden.
Das Verbundprojekt wurde im Rahmen der BMBF-Maßnahme „r4 - Innovative
Technologien für Ressourceneffizienz - Forschung zur Bereitstellung
wirtschaftsstrategischer Rohstoffe“ gefördert. Im Projektkonsortium waren insgesamt fünf
sächsische Partner aus Wissenschaft und Wirtschaft tätig. Die Projektpartner haben eine
enge Kooperation miteinander, die im Laufe des Projekts noch intensiviert wurde.
Die individuellen Stärken der Verbundpartner haben dazu beigetragen, diese große
Aufgabe gemeinsam zu bewältigen. Die Pilotmaschine wurde an der TU Bergakademie
Freiberg unter der Leitung des Projektkoordinators IAM aus den von allen Partnern
entwickelten Komponenten aufgebaut. Die Stiftungsprofessur Baumaschinen der TU
Dresden konnte ihre langjährige Erfahrung mit der Auslegung und Entwicklung von Marx-
Generatoren einbringen Die Firma Werner Industrielle Elektronik aus Kreischa entwickelte
im Projekt spezielle elektronische Komponenten zur Steuerung und Überwachung der
Pilotanlage. Die Firma HAVER ENGINEERING übernahm die Maschinenkonstruktion,
sowie die Programmierung der Prozessführung und Steuerung der Pilotanlage. Die
wichtige Wasseraufbereitung lag in der Verantwortung der G.E.O.S. Ingenieurgesellschaft
aus Freiberg ebenso die Charakterisierung der Erze.
Die Grundidee des Projekts war dabei nicht, das Material unmittelbar zu zerkleinern,
sondern es durch gezielte Einbringung von Rissen zu schwächen, um den Aufschluss und
das Ausbringen zu verbessern. Vor allem die in Komplexerzen enthaltenen
wirtschaftsstrategischen Rohstoffe wie Wolfram oder Indium sind Ziel der Anwendung
dieser Technologie. Aufgrund der polymetallisch komplexen mineralogischen Gefüge
wurde die Erschließung entsprechender auch in Deutschland bekannter Lagerstätten
bisher als unwirtschaftlich betrachtet. Einige dieser Komplexerzlagerstätten sind z. B. in
der Erzgebirgsregion in unmittelbarer Nähe von Freiberg zu finden.
Das Projekt ELIZE hat einen signifikanten Beitrag geleistet, die Elektroimpuls-Technologie
einen großen Schritt näher an kontinuierliche industrielle Anwendungen zu bringen. Vor
drei Jahren existierte nur eine patentierte Idee der beiden Universitäten und am Ende des
2. Seite 2 von 2
Projektes steht eine funktionierende Pilotanlage, die nicht nur Einsatzmöglichkeiten für die
Aufbereitung primärer mineralischer Rohstoffe eröffnet, sondern auch für das Recycling
von Wertstoffen geeignet ist. Eine kombinierte Beanspruchung durch Elektroimpulse und
nachfolgende mechanische Zerkleinerung sorgt dabei neben verbessertem Ausbringen
auch noch für die nötige Energieeffizienz.
In der Schlussphase des Projekts wurden Versuche mit Erzen und Schlacken
durchgeführt, um die Wirkung der Behandlung durch Elektroimpulse zu ermitteln. In einem
nächsten Schritt gilt es, die verschiedenen Einflussparameter auf die Effizienz des
Verfahrens noch besser zu verstehen und die optimalen Betriebsparameter für eine
größere Anzahl von Erzen zu bestimmen.
Zum Abschlusstreffen des Verbundvorhabens ELIZE versammelte sich das Projektteam
am Institut für Aufbereitungsmaschinen (IAM) der TU BA Freiberg.
Kontakt
Technische Universität Bergakademie Freiberg
Institut für Aufbereitungsmaschinen
Prof. Dr.-Ing. Holger Lieberwirth
Telefon: (03731) 39 2558
E-Mail: Holger.Lieberwirth@tu-dresden.de
Förderhinweis
Das Verbundprojekt wurde im Rahmen der BMBF-Maßnahme „r4 -
Innovative Technologien für Ressourceneffizienz - Forschung zur
Bereitstellung wirtschaftsstrategischer Rohstoffe“ gefördert
(Förderkennzeichen 033R161). Die Verantwortung für den Inhalt
dieser Veröffentlichung liegt beim Autor.