2. About Assign
• Assign was founded in 2005 and today is an expanding consultancy with 70 personnel
• We work with projects both onsite at our customers and in our own offices .
• Our offices are located in Gothenburg and Trollhättan.
• Assign is certified to ISO 9001:2008
Medical Technology Sanitary
Expanding
Off-shore Present Automotive
areas
areas
Process- / Energy
Food Ship Aerospace
Kontakt: Kontakt:
www.assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
+ 46 70 598 11 39
3. What we offer and our locations
Product Design
Design (CAE) and Calculation Main office in Gothenburg New offices
El- / Electronics - Around Stockholm
Manufacturing Engineering - South of Sweden
Production technique
Quality
Logistics
Robots
Technical information
Project management We are a selected partner to University West and
PTC (Production Technology Center) in
Trollhättan, where we also have our local office.
Our Norwegian business is run by
our daughter company Assign
Solutions located in Oslo.
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
4. Reference Assignment
Product Development
SAAB Aerosystems– Gripen NG
Assignment in cooperation with Semcon
Caran AB
Design of cable harnesses and brackets
Design and geometry assurance of cables
and electrical devices
Investigation of potential new device
placements and their affects on other
systems and aerodynamics etc.
Design tool: Catia V5
Gripen NG (Next Generation) Proposed version with new engine,
increased fuel capacity, higher payload, upgraded avionics and
other improvements
5. Reference Assignment
Product Development
SAAB Aerosystems - Gripen NG
Assignment in cooperation with
Semcon Caran AB
Assignment covers:
• Fuel installation
• Hydraulics installation
• Main frame (HSM-parts,
sheet metal)
• Design tool: Catia V5
Gripen NG (Next Generation) Proposed version with new engine,
increased fuel capacity, higher payload, upgraded avionics and
other improvements
6. Reference Assignment
Mechanical Design and Production Drawings
SAAB Aerostructure – Project Horizon
Assignment in cooperation with Semcon
Caran AB.
Redesign of Aircraft SAAB 2000 to enable
installation of radar ”Erieye”.
Extension of rear fine. Modification of
existing parts and designing new parts for
the fine structure.
Design of new covers and brackets for
rocket sensors on the outer skin of the
aircraft.
SAAB 2000 with radar Erieye Design tool: Catia V4
7. Reference Assignment
Mechanical Design and Product Development
SAAB Aerosystems - Skeldar V150
Assignment in cooperation with
Semcon Caran AB
• Designing complete main
frame and engine frame in
aspects of loads and vibrations
• Packing and installation of
various components
• Engine
• Fuel System
• Cooling system
• Avionics
Design tool: Catia V5
Skeldar V-150 is a lightweight unmanned helicopter, designed for
military and commercial applications
8. Current Reference Assignment
Assign working with CAE at Volvo Aero
We are at engineering level involved in
CAE calculation for products of today as
well as for the future.
9. Current Reference Assignment
Assign working with Porsche Engineering
- Working with Porsche Engineering in their pre-study for new Porsche automobiles.
- Packaging and concept design for the next generation electric vehicles
- Design tool. Catia V5
10. Reference Assignment
Product Development
Automotive supplier – Front seat structure
Development and design of front seat
structures for the next generation´s
passenger cars.
Development of details, specific for
customers, for the load-bearing
structure (e. g. chassis side plates),
integration of standard components
and coordination of customer
interfaces.
Kinematic calculations are used to
assure the design in the complete
adjustment area.
Design tool: Catia V5,
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
11. Current Reference Assignment
Assign working with the future at VCC Chassis
Development and design of Chassis
components for the next generation´s
passenger cars at VCC.
Responsible at a component
engineering level to co-ordinate the
design / development,cost and timing
of the next generation Chassis
platform Plus ensuring quality is
maintained thoughtout the process.
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
12. Current Reference Assignment
Assign working with the new V40 at VCC
- Overall software responsibility of Central Electronics Module
- Covering basic and advanced Body and Security Electronics functionality
- Developing the Gateway of the LIN and CAN networks
- Software strategy, planning and implementation jointly with HW/SW supplier
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
13. Current Reference Assignment
Assign working with the future V40 at VCC
- Studio Engineering
- Covering all aspects of the vehicle based in the design Dept.
- Working with the Designer as an aid for Engineering input.
- Making sure the end product is as close to the Designers vision as possible.
- Working tool: Catia V5, TCE
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
14. Current Reference Assignment
Assign working with the new Volvo Truck
- Responsibility for the cooling package, expansion tank and radiator “bug screen”
- Developing new components for the next truck generation
-Covering design of sheet metal and plastic parts.
- Design tool. Pro-engineer
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
15. Assign’s goal for 2012
Building on our past and boosting Assigns aviation portfolio
of clients, assignments and competence using our substantial
global network of contacts via professional social networking
and also via more traditional means. From there to maintain
and support our clients and assigned competence.
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39
16. A selection of our customers and partners plus companies where we currently carry out assignments
We are currently in discussion with
Kontaktuppgifter
Referensuppdrag
Kontakt: Kontakt:
www-assign.se kent-ake@assign.se noel@assign.se
+46 70 422 93 03
070 598 11 39