Suche senden
Hochladen
Production of composite material
âą
1 gefÀllt mir
âą
478 views
IAEME Publication
Folgen
Production of composite material
Weniger lesen
Mehr lesen
Technologie
Melden
Teilen
Melden
Teilen
1 von 6
Jetzt herunterladen
Downloaden Sie, um offline zu lesen
Empfohlen
Analysis of Mechanical and Metallurgical Properties of Al- Fly Ash Composite ...
Analysis of Mechanical and Metallurgical Properties of Al- Fly Ash Composite ...
IRJET Journal
Â
30120130405033
30120130405033
IAEME Publication
Â
30120140505016 2
30120140505016 2
IAEME Publication
Â
Fabrication and mechanical properties of stir cast al si12 cub4c composites
Fabrication and mechanical properties of stir cast al si12 cub4c composites
eSAT Publishing House
Â
STUDIES OF MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AL-2Cu-2...
STUDIES OF MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AL-2Cu-2...
dbpublications
Â
IRJET- Experimental Study on Al Base Hybrid Metal Matrix Composities
IRJET- Experimental Study on Al Base Hybrid Metal Matrix Composities
IRJET Journal
Â
Ijetr011950
Ijetr011950
ER Publication.org
Â
1435936220 volume 2 issue 5 (may 2015)
1435936220 volume 2 issue 5 (may 2015)
ijiert bestjournal
Â
Empfohlen
Analysis of Mechanical and Metallurgical Properties of Al- Fly Ash Composite ...
Analysis of Mechanical and Metallurgical Properties of Al- Fly Ash Composite ...
IRJET Journal
Â
30120130405033
30120130405033
IAEME Publication
Â
30120140505016 2
30120140505016 2
IAEME Publication
Â
Fabrication and mechanical properties of stir cast al si12 cub4c composites
Fabrication and mechanical properties of stir cast al si12 cub4c composites
eSAT Publishing House
Â
STUDIES OF MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AL-2Cu-2...
STUDIES OF MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AL-2Cu-2...
dbpublications
Â
IRJET- Experimental Study on Al Base Hybrid Metal Matrix Composities
IRJET- Experimental Study on Al Base Hybrid Metal Matrix Composities
IRJET Journal
Â
Ijetr011950
Ijetr011950
ER Publication.org
Â
1435936220 volume 2 issue 5 (may 2015)
1435936220 volume 2 issue 5 (may 2015)
ijiert bestjournal
Â
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
NEERAJKUMAR1898
Â
Ijmet 08 06_062
Ijmet 08 06_062
Lakshmi Vennela
Â
Compaction, sintering and mechanical properties
Compaction, sintering and mechanical properties
iaemedu
Â
Investigation of Mechanical Properties and Wear rate of Aluminium A356 -SiC M...
Investigation of Mechanical Properties and Wear rate of Aluminium A356 -SiC M...
IRJET Journal
Â
Preparation and Characterization of Aluminium Metal Matrix Composite by using...
Preparation and Characterization of Aluminium Metal Matrix Composite by using...
IRJET Journal
Â
WEAR STUDIES ON THE HEAT TREATED AL6061-ÎŒSIC AND AL6061-NSIC METAL MATRIX COM...
WEAR STUDIES ON THE HEAT TREATED AL6061-ÎŒSIC AND AL6061-NSIC METAL MATRIX COM...
IAEME Publication
Â
Design and Fabrication of a Stir Casting Furnace Set-Up
Design and Fabrication of a Stir Casting Furnace Set-Up
IJERA Editor
Â
IRJET-Fabrication And Testing Of Aluminium Metal Matrix Composites Through St...
IRJET-Fabrication And Testing Of Aluminium Metal Matrix Composites Through St...
IRJET Journal
Â
Microstructure analysis and wear behaviour of al based metal matrix composite...
Microstructure analysis and wear behaviour of al based metal matrix composite...
eSAT Publishing House
Â
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
ijtsrd
Â
Wear Test on Aluminium Foam Prepared from Aluminium (LM0) as Base Metal and D...
Wear Test on Aluminium Foam Prepared from Aluminium (LM0) as Base Metal and D...
IRJET Journal
Â
A comparative investigation on physical and mechanical properties of mmc rein...
A comparative investigation on physical and mechanical properties of mmc rein...
eSAT Journals
Â
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
AM Publications
Â
A Review of the Aluminium Metal Matrix Composite and its Properties
A Review of the Aluminium Metal Matrix Composite and its Properties
IRJET Journal
Â
Effects of aging time on mechanical properties of sand cast al 4.5 cu alloy
Effects of aging time on mechanical properties of sand cast al 4.5 cu alloy
eSAT Publishing House
Â
IRJET- Experimental Analysis on Aluminum Alloy(6063) with Silicon Carbide...
IRJET- Experimental Analysis on Aluminum Alloy(6063) with Silicon Carbide...
IRJET Journal
Â
Development and Evaluation of Various Properties of Copper -Aluminium Me...
Development and Evaluation of Various Properties of Copper -Aluminium Me...
IRJET Journal
Â
DEVELOPMENT AND TRIBOLOGICAL CHARACTERIZATION OF DUAL PARTICLE AND TRIPLE PAR...
DEVELOPMENT AND TRIBOLOGICAL CHARACTERIZATION OF DUAL PARTICLE AND TRIPLE PAR...
ijmech
Â
CFD Analysis and Fabrication of Aluminium Cenosphere Composites
CFD Analysis and Fabrication of Aluminium Cenosphere Composites
IJMER
Â
PRODUCTION OF COMPOSITE MATERIAL
PRODUCTION OF COMPOSITE MATERIAL
IAEME Publication
Â
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...
IAEME Publication
Â
Effect of al2 o3 on wear resistance in aluminum matrix composite produced by ...
Effect of al2 o3 on wear resistance in aluminum matrix composite produced by ...
IAEME Publication
Â
Weitere Àhnliche Inhalte
Was ist angesagt?
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
NEERAJKUMAR1898
Â
Ijmet 08 06_062
Ijmet 08 06_062
Lakshmi Vennela
Â
Compaction, sintering and mechanical properties
Compaction, sintering and mechanical properties
iaemedu
Â
Investigation of Mechanical Properties and Wear rate of Aluminium A356 -SiC M...
Investigation of Mechanical Properties and Wear rate of Aluminium A356 -SiC M...
IRJET Journal
Â
Preparation and Characterization of Aluminium Metal Matrix Composite by using...
Preparation and Characterization of Aluminium Metal Matrix Composite by using...
IRJET Journal
Â
WEAR STUDIES ON THE HEAT TREATED AL6061-ÎŒSIC AND AL6061-NSIC METAL MATRIX COM...
WEAR STUDIES ON THE HEAT TREATED AL6061-ÎŒSIC AND AL6061-NSIC METAL MATRIX COM...
IAEME Publication
Â
Design and Fabrication of a Stir Casting Furnace Set-Up
Design and Fabrication of a Stir Casting Furnace Set-Up
IJERA Editor
Â
IRJET-Fabrication And Testing Of Aluminium Metal Matrix Composites Through St...
IRJET-Fabrication And Testing Of Aluminium Metal Matrix Composites Through St...
IRJET Journal
Â
Microstructure analysis and wear behaviour of al based metal matrix composite...
Microstructure analysis and wear behaviour of al based metal matrix composite...
eSAT Publishing House
Â
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
ijtsrd
Â
Wear Test on Aluminium Foam Prepared from Aluminium (LM0) as Base Metal and D...
Wear Test on Aluminium Foam Prepared from Aluminium (LM0) as Base Metal and D...
IRJET Journal
Â
A comparative investigation on physical and mechanical properties of mmc rein...
A comparative investigation on physical and mechanical properties of mmc rein...
eSAT Journals
Â
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
AM Publications
Â
A Review of the Aluminium Metal Matrix Composite and its Properties
A Review of the Aluminium Metal Matrix Composite and its Properties
IRJET Journal
Â
Effects of aging time on mechanical properties of sand cast al 4.5 cu alloy
Effects of aging time on mechanical properties of sand cast al 4.5 cu alloy
eSAT Publishing House
Â
IRJET- Experimental Analysis on Aluminum Alloy(6063) with Silicon Carbide...
IRJET- Experimental Analysis on Aluminum Alloy(6063) with Silicon Carbide...
IRJET Journal
Â
Development and Evaluation of Various Properties of Copper -Aluminium Me...
Development and Evaluation of Various Properties of Copper -Aluminium Me...
IRJET Journal
Â
DEVELOPMENT AND TRIBOLOGICAL CHARACTERIZATION OF DUAL PARTICLE AND TRIPLE PAR...
DEVELOPMENT AND TRIBOLOGICAL CHARACTERIZATION OF DUAL PARTICLE AND TRIPLE PAR...
ijmech
Â
CFD Analysis and Fabrication of Aluminium Cenosphere Composites
CFD Analysis and Fabrication of Aluminium Cenosphere Composites
IJMER
Â
Was ist angesagt?
(19)
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
Â
Ijmet 08 06_062
Ijmet 08 06_062
Â
Compaction, sintering and mechanical properties
Compaction, sintering and mechanical properties
Â
Investigation of Mechanical Properties and Wear rate of Aluminium A356 -SiC M...
Investigation of Mechanical Properties and Wear rate of Aluminium A356 -SiC M...
Â
Preparation and Characterization of Aluminium Metal Matrix Composite by using...
Preparation and Characterization of Aluminium Metal Matrix Composite by using...
Â
WEAR STUDIES ON THE HEAT TREATED AL6061-ÎŒSIC AND AL6061-NSIC METAL MATRIX COM...
WEAR STUDIES ON THE HEAT TREATED AL6061-ÎŒSIC AND AL6061-NSIC METAL MATRIX COM...
Â
Design and Fabrication of a Stir Casting Furnace Set-Up
Design and Fabrication of a Stir Casting Furnace Set-Up
Â
IRJET-Fabrication And Testing Of Aluminium Metal Matrix Composites Through St...
IRJET-Fabrication And Testing Of Aluminium Metal Matrix Composites Through St...
Â
Microstructure analysis and wear behaviour of al based metal matrix composite...
Microstructure analysis and wear behaviour of al based metal matrix composite...
Â
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Â
Wear Test on Aluminium Foam Prepared from Aluminium (LM0) as Base Metal and D...
Wear Test on Aluminium Foam Prepared from Aluminium (LM0) as Base Metal and D...
Â
A comparative investigation on physical and mechanical properties of mmc rein...
A comparative investigation on physical and mechanical properties of mmc rein...
Â
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
Â
A Review of the Aluminium Metal Matrix Composite and its Properties
A Review of the Aluminium Metal Matrix Composite and its Properties
Â
Effects of aging time on mechanical properties of sand cast al 4.5 cu alloy
Effects of aging time on mechanical properties of sand cast al 4.5 cu alloy
Â
IRJET- Experimental Analysis on Aluminum Alloy(6063) with Silicon Carbide...
IRJET- Experimental Analysis on Aluminum Alloy(6063) with Silicon Carbide...
Â
Development and Evaluation of Various Properties of Copper -Aluminium Me...
Development and Evaluation of Various Properties of Copper -Aluminium Me...
Â
DEVELOPMENT AND TRIBOLOGICAL CHARACTERIZATION OF DUAL PARTICLE AND TRIPLE PAR...
DEVELOPMENT AND TRIBOLOGICAL CHARACTERIZATION OF DUAL PARTICLE AND TRIPLE PAR...
Â
CFD Analysis and Fabrication of Aluminium Cenosphere Composites
CFD Analysis and Fabrication of Aluminium Cenosphere Composites
Â
Ăhnlich wie Production of composite material
PRODUCTION OF COMPOSITE MATERIAL
PRODUCTION OF COMPOSITE MATERIAL
IAEME Publication
Â
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...
IAEME Publication
Â
Effect of al2 o3 on wear resistance in aluminum matrix composite produced by ...
Effect of al2 o3 on wear resistance in aluminum matrix composite produced by ...
IAEME Publication
Â
30120130406010
30120130406010
IAEME Publication
Â
Compaction sintering and mechanical properties
Compaction sintering and mechanical properties
iaemedu
Â
Evaluation Of Factors Affecting Sliding Wear Behaviour Of Al-Flyash Metal Mat...
Evaluation Of Factors Affecting Sliding Wear Behaviour Of Al-Flyash Metal Mat...
IJMER
Â
ALUMINIUM METAL MATRIX COMPOSITE WITH DUAL REINFORCEMENT
ALUMINIUM METAL MATRIX COMPOSITE WITH DUAL REINFORCEMENT
IAEME Publication
Â
EFFECT OF GRAPHITE ON MECHANICAL AND MACHINING PROPERTIES OF Al-BRONZE PREPAR...
EFFECT OF GRAPHITE ON MECHANICAL AND MACHINING PROPERTIES OF Al-BRONZE PREPAR...
IAEME Publication
Â
30120140505020
30120140505020
IAEME Publication
Â
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
International Journal of Engineering Inventions www.ijeijournal.com
Â
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
International Journal of Engineering Inventions www.ijeijournal.com
Â
Preparation and Characterization of Aluminium Foam Prepared through Melt Rout...
Preparation and Characterization of Aluminium Foam Prepared through Melt Rout...
IRJET Journal
Â
Study of Wear Behavior of Aluminum based MMCs using Taguchi Methods
Study of Wear Behavior of Aluminum based MMCs using Taguchi Methods
RSIS International
Â
Synthesis And Characterization of Aluminum âSilicon-Fly Ash Composite By Stir...
Synthesis And Characterization of Aluminum âSilicon-Fly Ash Composite By Stir...
IRJESJOURNAL
Â
IRJET- Experimental Investigation of Wear Behaviour of Aluminium Metal Matrix...
IRJET- Experimental Investigation of Wear Behaviour of Aluminium Metal Matrix...
IRJET Journal
Â
Fabrication and Characterisation of Hybrid Aluminium Metal Matrix Composite...
Fabrication and Characterisation of Hybrid Aluminium Metal Matrix Composite...
IRJET Journal
Â
C012251216
C012251216
IOSR Journals
Â
Some studies on two step stir casting method
Some studies on two step stir casting method
P shanmughasundaram
Â
Ijmet 06 09_014
Ijmet 06 09_014
IAEME Publication
Â
Nit paper
Nit paper
Raghavendra N
Â
Ăhnlich wie Production of composite material
(20)
PRODUCTION OF COMPOSITE MATERIAL
PRODUCTION OF COMPOSITE MATERIAL
Â
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...
Â
Effect of al2 o3 on wear resistance in aluminum matrix composite produced by ...
Effect of al2 o3 on wear resistance in aluminum matrix composite produced by ...
Â
30120130406010
30120130406010
Â
Compaction sintering and mechanical properties
Compaction sintering and mechanical properties
Â
Evaluation Of Factors Affecting Sliding Wear Behaviour Of Al-Flyash Metal Mat...
Evaluation Of Factors Affecting Sliding Wear Behaviour Of Al-Flyash Metal Mat...
Â
ALUMINIUM METAL MATRIX COMPOSITE WITH DUAL REINFORCEMENT
ALUMINIUM METAL MATRIX COMPOSITE WITH DUAL REINFORCEMENT
Â
EFFECT OF GRAPHITE ON MECHANICAL AND MACHINING PROPERTIES OF Al-BRONZE PREPAR...
EFFECT OF GRAPHITE ON MECHANICAL AND MACHINING PROPERTIES OF Al-BRONZE PREPAR...
Â
30120140505020
30120140505020
Â
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
Â
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
Effect of Squeeze pressure on the hardness and wear resistance of Aluminium ...
Â
Preparation and Characterization of Aluminium Foam Prepared through Melt Rout...
Preparation and Characterization of Aluminium Foam Prepared through Melt Rout...
Â
Study of Wear Behavior of Aluminum based MMCs using Taguchi Methods
Study of Wear Behavior of Aluminum based MMCs using Taguchi Methods
Â
Synthesis And Characterization of Aluminum âSilicon-Fly Ash Composite By Stir...
Synthesis And Characterization of Aluminum âSilicon-Fly Ash Composite By Stir...
Â
IRJET- Experimental Investigation of Wear Behaviour of Aluminium Metal Matrix...
IRJET- Experimental Investigation of Wear Behaviour of Aluminium Metal Matrix...
Â
Fabrication and Characterisation of Hybrid Aluminium Metal Matrix Composite...
Fabrication and Characterisation of Hybrid Aluminium Metal Matrix Composite...
Â
C012251216
C012251216
Â
Some studies on two step stir casting method
Some studies on two step stir casting method
Â
Ijmet 06 09_014
Ijmet 06 09_014
Â
Nit paper
Nit paper
Â
Mehr von IAEME Publication
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME Publication
Â
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
IAEME Publication
Â
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
IAEME Publication
Â
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
IAEME Publication
Â
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
IAEME Publication
Â
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
IAEME Publication
Â
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
IAEME Publication
Â
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IAEME Publication
Â
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
IAEME Publication
Â
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
IAEME Publication
Â
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
IAEME Publication
Â
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
IAEME Publication
Â
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
IAEME Publication
Â
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
IAEME Publication
Â
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
IAEME Publication
Â
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
IAEME Publication
Â
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
IAEME Publication
Â
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
IAEME Publication
Â
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
IAEME Publication
Â
A MULTIPLE â CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE â CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
IAEME Publication
Â
Mehr von IAEME Publication
(20)
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
Â
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
Â
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
Â
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
Â
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
Â
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
Â
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
Â
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
Â
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
Â
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
Â
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
Â
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
Â
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
Â
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
Â
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
Â
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
Â
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
Â
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
Â
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
Â
A MULTIPLE â CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE â CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
Â
KĂŒrzlich hochgeladen
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
Enterprise Knowledge
Â
08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men
Delhi Call girls
Â
CNv6 Instructor Chapter 6 Quality of Service
CNv6 Instructor Chapter 6 Quality of Service
giselly40
Â
SQL Database Design For Developers at php[tek] 2024
SQL Database Design For Developers at php[tek] 2024
Scott Keck-Warren
Â
Boost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivity
Principled Technologies
Â
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Igalia
Â
Unblocking The Main Thread Solving ANRs and Frozen Frames
Unblocking The Main Thread Solving ANRs and Frozen Frames
Sinan KOZAK
Â
đŹ The future of MySQL is Postgres đ
đŹ The future of MySQL is Postgres đ
RTylerCroy
Â
Tech-Forward - Achieving Business Readiness For Copilot in Microsoft 365
Tech-Forward - Achieving Business Readiness For Copilot in Microsoft 365
2toLead Limited
Â
Salesforce Community Group Quito, Salesforce 101
Salesforce Community Group Quito, Salesforce 101
Paola De la Torre
Â
Scaling API-first â The story of a global engineering organization
Scaling API-first â The story of a global engineering organization
Radu Cotescu
Â
Google AI Hackathon: LLM based Evaluator for RAG
Google AI Hackathon: LLM based Evaluator for RAG
Sujit Pal
Â
My Hashitalk Indonesia April 2024 Presentation
My Hashitalk Indonesia April 2024 Presentation
Ridwan Fadjar
Â
GenCyber Cyber Security Day Presentation
GenCyber Cyber Security Day Presentation
Michael W. Hawkins
Â
Histor y of HAM Radio presentation slide
Histor y of HAM Radio presentation slide
vu2urc
Â
WhatsApp 9892124323 âCall Girls In Kalyan ( Mumbai ) secure service
WhatsApp 9892124323 âCall Girls In Kalyan ( Mumbai ) secure service
Pooja Nehwal
Â
08448380779 Call Girls In Greater Kailash - I Women Seeking Men
08448380779 Call Girls In Greater Kailash - I Women Seeking Men
Delhi Call girls
Â
Breaking the Kubernetes Kill Chain: Host Path Mount
Breaking the Kubernetes Kill Chain: Host Path Mount
Puma Security, LLC
Â
Automating Business Process via MuleSoft Composer | Bangalore MuleSoft Meetup...
Automating Business Process via MuleSoft Composer | Bangalore MuleSoft Meetup...
shyamraj55
Â
Presentation on how to chat with PDF using ChatGPT code interpreter
Presentation on how to chat with PDF using ChatGPT code interpreter
naman860154
Â
KĂŒrzlich hochgeladen
(20)
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
Â
08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men
Â
CNv6 Instructor Chapter 6 Quality of Service
CNv6 Instructor Chapter 6 Quality of Service
Â
SQL Database Design For Developers at php[tek] 2024
SQL Database Design For Developers at php[tek] 2024
Â
Boost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivity
Â
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Â
Unblocking The Main Thread Solving ANRs and Frozen Frames
Unblocking The Main Thread Solving ANRs and Frozen Frames
Â
đŹ The future of MySQL is Postgres đ
đŹ The future of MySQL is Postgres đ
Â
Tech-Forward - Achieving Business Readiness For Copilot in Microsoft 365
Tech-Forward - Achieving Business Readiness For Copilot in Microsoft 365
Â
Salesforce Community Group Quito, Salesforce 101
Salesforce Community Group Quito, Salesforce 101
Â
Scaling API-first â The story of a global engineering organization
Scaling API-first â The story of a global engineering organization
Â
Google AI Hackathon: LLM based Evaluator for RAG
Google AI Hackathon: LLM based Evaluator for RAG
Â
My Hashitalk Indonesia April 2024 Presentation
My Hashitalk Indonesia April 2024 Presentation
Â
GenCyber Cyber Security Day Presentation
GenCyber Cyber Security Day Presentation
Â
Histor y of HAM Radio presentation slide
Histor y of HAM Radio presentation slide
Â
WhatsApp 9892124323 âCall Girls In Kalyan ( Mumbai ) secure service
WhatsApp 9892124323 âCall Girls In Kalyan ( Mumbai ) secure service
Â
08448380779 Call Girls In Greater Kailash - I Women Seeking Men
08448380779 Call Girls In Greater Kailash - I Women Seeking Men
Â
Breaking the Kubernetes Kill Chain: Host Path Mount
Breaking the Kubernetes Kill Chain: Host Path Mount
Â
Automating Business Process via MuleSoft Composer | Bangalore MuleSoft Meetup...
Automating Business Process via MuleSoft Composer | Bangalore MuleSoft Meetup...
Â
Presentation on how to chat with PDF using ChatGPT code interpreter
Presentation on how to chat with PDF using ChatGPT code interpreter
Â
Production of composite material
1.
International INTERNATIONAL Journal
of Mechanical JOURNAL Engineering OF and MECHANICAL Technology (IJMET), ISSN ENGINEERING 0976 â 6340(Print), ISSN 0976 â 6359(Online), Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME AND TECHNOLOGY (IJMET) ISSN 0976 â 6340 (Print) ISSN 0976 â 6359 (Online) Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME: www.iaeme.com/IJMET.asp Journal Impact Factor (2014): 7.5377 (Calculated by GISI) www.jifactor.com 394 IJMET © I A E M E PRODUCTION OF COMPOSITE MATERIAL Kesavulu.A1, Mr. F.AnandRaju2, Dr. M.L.S.Deva Kumar3 1PG Student, Department of Mechanical Engineering, SIETK, JNTUA, Puttur (India) 2Assistant Professor, Department of Mechanical Engineering, SIETK, JNTUA, Puttur (India) 3Professor, Department of Mechanical Engineering, JNTUA, Ananthapuramu, (india) ABSTRACT Metal matrix composites [MMC] are most important materials used for recent works in the industry and engineering applications. Fly ash particles are used in metal matrix composites, are low costand low density are available in large quantities of waste by product in power plants. The adding of fly ash with aluminium reinforcement by using stir casting process it can reduces the cost and density of aluminium material. Metal composite processes are improved mechanical properties like strength, hardness, low density and good wear resistance compared to other metals. In this study, aluminium clad and fly ash chemical analysis is studied before and after mixing and forming as particulate metal matrix composite and comparing the mechanical, physical properties of the MMC at varying % of fly ash addition. By comparison at various levels 15% of fly ash the MMC gives good mechanical and physical properties. This type of MMC is widely useful in light weight vehicles and aerospace application. Keywords: Aluminium, Chemical Analysis, Fly Ash, Mechanical Properties, Stir Casting. 1. INTRODUCTION Aluminium fly ash metal matrix composite is strengthen composite in which soft and ductile aluminium matrix is strengthen by the hard and brittle fly ash particles. Discontinuously reinforced aluminium based metal matrix composites are improving their high strength, high isotropic and good wear resistance. Discontinuously reinforcement aluminium composites have been developed in the various fields like aerospace, automotive and many other engineering applications [1]. Fly ash particles are low cost, low density and available in large quantities of waste by-product in thermal power plants and industries. In this study, fly ash particles are generated in the combustion of coal is chosen to reinforcement material. In India coal produces about 1100 lacks tons of fly ash per year from burning about 2500 lacks tons coal for power generation [2]. Present days
2.
International Journal of
Mechanical Engineering and Technology (IJMET), ISSN 0976 â 6340(Print), ISSN 0976 â 6359(Online), Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME fly ash utilization improved and reduces the pollution in environment, now in present dayâs fly ash is focusing and improving their investigating in various fields like MMCs, bricks, agricultural and etc. By adding fly ash reinforcement with commercially aluminium to make aluminium fly ash composite is improving their properties in strength and hardness and reduces the weight of the commercially aluminium. Hence, composites with fly ash reinforcement are overcome the cost barrier for wide applications. By adding of commercially aluminium with fly ashis decreases the need of intensive energy-aluminium, by resulting in energy savings [3]. By mixing the aluminium fly ash composites by using stir casting process method,in stir casting process is mixing conventionally in directly furnace it will reduce the time for mixing the aluminium and fly ash. Mixing the aluminium with fly ash particles in the ratio of 5% to 20% of weight in the commercially aluminium. 395 To studied on commercially aluminium and fly ash chemical analysis in testing Laborites. Hence, studied before and after physical and mechanical properties of aluminium fly ash metal matrix composite and also comparing with pure commercially aluminium. The aluminium fly ash composite are mainly used in aerospace, industries and other engineering application. 2. EXPERIMENTAL WORK 2.1 Raw Materials The matrix material is used in the experiment investigation of commercially aluminium. The fly ash was collected from the Lanco industries. The particle size of the fly as is sieved the range from (0.1-100 ÎŒm). 2.2 Melting and Casting First of all, 150gm of commercially aluminium was melted in a resistance heated furnace and casted in a mild steel die. The melt temperature was raised to 7200C. Then the aluminium-fly ash (5%, 10%, 15% and 20%) composites were prepared by stir casting method. The 150gm of commercially aluminium and then (5, 10, 15, 20) wt% of fly ash was added to the aluminium melt for production of four different composites. The fly ash particles were preheated to 300oC for threehours to remove the moisture. Commercially aluminium was melted by raising its temperature to 720oC. Then the melt was stirred using a mild steel stirrer blades. Fly ash particles were added to the melt at the time of formation of vortex in the melt due to stirring. The melt temperature was maintained at 6800C to 7200C during the addition of the fly ash particles. Then the melt was casted in a mild steel die. The hardness measurement testing was carried out Al (5, 10, 15 and 20) wt% fly ash composites. The hardness of the samples was determined by Rock well hardness testing machine with 65 kgf load and diamond cone. The detention time for the hardness measurement was 15sec. The tensile strength of the samples was determined by the universal testing machine. 2.3 Mechanical Properties Observation Hardness Test Hardness test is done by the Rockwell Ahardness testing machine and taken the different composite samples. Tensile Test Tensile test is done by the universal testing machine by taken the different composite samples.
3.
International Journal of
Mechanical Engineering and Technology (IJMET), ISSN 0976 â 6340(Print), ISSN 0976 â 6359(Online), Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME 396 2.4 Design and Manufactured a Die Fig. 1: 2D Dimensions for die Fig. 2 Die 2.5 List of Experimental Work Figures Fig. 3 Furnace Fig. 5 Rock well hardness
4.
International Journal of
Mechanical Engineering and Technology (IJMET), ISSN 0976 â 6340(Print), ISSN 0976 â 6359(Online), Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME Component Al Cr Cu Fe Mg Weight (%) 87.1 â 91.4 0.18 â 0.28 1.2 â 2 Max 0.5 2.1 â 2 Mn Other, each Other, total Si Ti Zn Max 0.3 Max 0.05 Max 0.15 Max 0.4 Max 0.2 5.1 â 6.1 397 Fig. 4: Sieve machine Fig. 6: Universal testing machine 3. RESULTS AND DISCUSSION 3.1 Chemical Analysis of Commercially Aluminium Table 1: Chemical analysis of commercially aluminium 3.2 Physical and Mechanical Properties of Commercially Aluminium Density â 2.81g/cm3 Hardness HRA â 50 Tensile strength â 572 MPa 3.3 Chemical Analysis of Fly Ash Table 2: Chemical analysis of fly ash COMPONENTS PERCENTAGE (%) Silicon dioxide (SiO2) 67.15 Aluminium oxide (Al2O3) 29.5 Iron oxide (Fe2O3) 0.15 Calcium oxide (Cao) 1.5 Magnesium oxide (Mgo) 1.7 3.4 Hardness Measurement Table 3: Hardness measurement Composite samples Hardness Aluminium (%) Fly ash (%) HRA 95 5 53 90 10 56.2 85 15 58.9 80 20 60.15
5.
International Journal of
Mechanical Engineering and Technology (IJMET), ISSN 0976 â 6340(Print), ISSN 0976 â 6359(Online), Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME 5 10 15 20 Fly ash (%wt.) 5 10 15 20 Fly ash (% of wt.) 398 62 60 58 56 54 52 50 48 Hardness HRA Fig. 7: Graph showing variations in Fly ash vs. hardness The above table shows that incorporation of fly ash particles in Aluminium matrix causes reasonable increase in hardness. The strength of the composite can be due to dispersion strengthening as well as due to particle reinforcement. Thus, fly ash as filler in aluminium casting is low cost, decreases density and increase hardness which are needed in various industries like automotive etc. 3.5 Tensile Strength Measurements Table 4: Tensile strength measurement Composite samples Ultimate Tensile Aluminium (%) Fly ash (%) strength (MPa) 95 5 578 90 10 585 85 15 591.3 80 20 588.6 595 590 585 580 575 570 Tensile stregth in MPa Fig. 8: Graph showing variations in Fly ash vs. Tensile strength The above table shows that the tensile strength will be increasing up to sample 3 (15%). Hence the hardness increases the tensile strength will decreasing.
6.
International Journal of
Mechanical Engineering and Technology (IJMET), ISSN 0976 â 6340(Print), ISSN 0976 â 6359(Online), Volume 5, Issue 9, September (2014), pp. 394-399 © IAEME 399 4. CONCLUSION 1. From the study itâs concluded that we can use fly ash for the production of composites and can turn industrial waste. 2. Fly ash up to 20% of weight can be successfully added to aluminium by stir casting methods to produce composites. 3. The density of aluminium-fly ash is decreased with increase in addition of fly ash and the density will be reduced. 4. The hardness of aluminium-fly ash has increased with increase in addition of fly ash the hardness will be increased. 5. The tensile strength of aluminium-fly ash is increased up to 15% of fly ash is added in the aluminium. 5. REFERENCES [1] Mahendra.K.V and Radhakrishna. K, Castable composites and their application in automobiles, Proc. IMechE Vol. 221 Part D: J. Automobile Engineering, (2007): pp. 135-140 [2] P. Shanmughasundaram1, R. Subramanian2 âSome Studies on Aluminium-Fly Ash Composites Fabricated by Two Step Stir Casting Methodâ, European Journal of Scientific Research ISSN 1450-216X Vol.63 No.2 (2011), pp.204-218. [3] P. K. Rohatgi and R. Q. Guo, âLow Cost Cast Aluminium â Fly Ash Composites for Ultra light Automotive Applicationâ, TMS Annual Meeting, Automotive Alloys, (1997) [4] Deepak singla1, S.R. Mediratta2, âEvaluation of Mechanical Properties of Al 7075-Fly Ash Composite Materialâ, International Journal of Innovative Research in Science, Engineering and Technology ISSN: 2319-8753 Vol. 2, Issue 4, April 2013 [5] H.C. Anilkumar1, H.S. Hebbar2 and K.S. Ravishankar3 âMechanical Properties of Fly Ash Reinforced Aluminium Alloy (Al6061) Compositesâ, International Journal of Mechanical and Materials Engineering (IJMME), Vol.6 (2011), No.1, 41-45 [6] sankar.L1, Srinivasan.R2, Viswanathan.P3 and Subramanian.R4, âComparison Study of Al-Fly Ash Composites In Automobile Clutch Platesâ, from internet [7] Vivekananthan1 M. and Senthamarai2 k., âExperimental Evaluation of Aluminium-Fly Ash Composite Material to Increase the Mechanical Wear Behaviour by Stir Casting Methodâ, CARE Journal of Applied Research (ISSN 2321-4090) [8] K.V. MAHENDRA1, K. R ADHAKRISHNA2, âFabrication of Alâ4.5% Cu Alloy with Fly Ash Metal Matrix Composites and Its Characterizationâ, material science-poland, Vol.25, No.1 2007 [9] Hull D, Clyne T W, âAn Introduction to Composite Materials, Cambridgeâ, UK: Cambridge Univ. Press, 1996 [10] Matthews F.L., Ralwlings R.D, âComposite materials engineering and scienceâ, Glasgow, UK, Champaman and hall, 1994 [11] DRDO âComposite Materialsâ, Popular Science Technology (PST) series is being published by DESIDOC, was published in the year 1990 [12] Rohatgi P.K, Metal-matrix Composites, Defence Science Journal, Vol 43, No 4, (1993): pp 323-349. [13] R.Maguteeswarana, Dr. R.Sivasubramanian and V.Suresh, âStudy and Investigation of Analysis of Metal Matrix Compositeâ, International Journal of Mechanical Engineering Technology (IJMET), Volume 3, Issue 2, 2012, pp. 171 - 188, ISSN Print: 0976 â 6340, ISSN Online: 0976 â 6359. [14] R.Maguteeswarana, Dr. R.Sivasubramanian and V.Suresh, âMethodology Study and Analysis of Magnesium Alloy Metal Matrix Compositesâ International Journal of Mechanical Engineering Technology (IJMET), Volume 3, Issue 2, 2012, pp. 217 - 224, ISSN Print: 0976 â 6340, ISSN Online: 0976 â 6359.
Jetzt herunterladen