SlideShare ist ein Scribd-Unternehmen logo
1 von 12
Downloaden Sie, um offline zu lesen
1
“The U.S. pulp and paper industry—defined as
facilities engaged in the manufacture of pulp, paper,
and paperboard—consumes over $7 billion worth
of purchased fuels and electricity per year. Energy
efficiency improvement is an important way to reduce
these costs and to increase predictable earnings,
especially in times of high energy price volatility.”
Berkeley National Laboratory
Environmental Energy Technologies Division, October 2009.
Objective
To identify key areas in the steam generation cycle, condensate
recovery system and waste heat recovery process where cost-effective
instrumentation solutions offer a tangible return on investment over
the short term. The goal is to reduce heat rate, environmental impact,
fuel and water consumption, water treatment and maintenance costs in
commercial and heavy industries where steam generation is essential to
the production processes.
Overview
• Why control?
• Steam generation
Boiler/steam drum
Deaeration
Blowdown
• Condensate and waste heat recovery
Cost benefits of condensate recovery
Condensate receiver tanks
Pump protection
Flash tanks and heat exchangers/condensers
• Water chemistry and treatment
Chemical storage monitoring
• Energy management
Combustion air, fuel flow & compressed air
Why Control?
Although the pulp and paper industry is one of the largest producers
of steam outside power generation, the primary metals, petroleum
refining, chemical process, and food processing industries also allocate
significant portions of their total energy consumption, anywhere from
10% to 60%, to the production of steam. Instrumentation plays an
importantroleinkeyapplicationsthroughoutthesteamgenerationcycle.
As a consequence, the performance of any level technology relative to
instrument induced errors, calibration nuances, and vulnerabilities to
process dynamics can have an immediate and adverse impact on fuel
consumptionwhilecontributingnegativelyinotheraspectsoftheprocess
be it makeup water requirements, excessive boiler blowdown, energy
transfer, etc. Unfortunately, these other aspects of the process indirectly
contribute to the inefficient use of fuel and hinder production throughput
and product quality. Adding to this burden is the potential for damage
to expensive hardware resulting in forced outages, unscheduled, costly
maintenance, and production downtime.
It is not an uncommon practice in this day and age to employ a waste
heat and/or condensate recovery process to reduce energy losses and
capture valuable condensate. The use of instrumentation technology
that cannot adequately or reliably address the control aspects of these
processes can inhibit the effectiveness and overall return on investment
in these systems or expose hardware to unnecessary damage.
Furthermore, processes where electricity consumption and steam
generation represent a disproportionate amount of the fuel cost can be
plagued with inefficiencies simply due to a technology’s shortcomings
Donald Hite, Business Development Manager
Magnetrol®
International and Orion Instruments®
Optimizing the Steam Generation
Cycle and Condensate
Recovery Process for Profit
2
on critical applications which adversely affect heat rate. Of course, this
depends on the fuel type as well as other factors. Nonetheless, when
properly addressed, these areas have an immediate and positive impact
on costs.
An overview of the processes involved, along with the unique
instrumentation requirements for each component, offers insight into
the significance of maintaining proper level control and protective
measures to realize potential savings in steam generation, waste heat
and condensate recovery and water treatment systems common in
heavy industry.
In essence, it is not a one-size-fits-all scenario; rather by providing
the proper level technology to enhance performance in specific areas
throughout the process to maintain market share in a highly competitive
global arena. This paper will highlight the individual areas where the
application of specific level control technologies can improve overall
performance. As price is usually a key consideration, severe service
applications leverage technologies where the cost benefits are realized
over the short and long terms and are linked directly to efficiency. More
consideration is typically given to the front-end cost on applications
having the least effect on efficiency of the process; but, in reality,
reliable measurement is a key factor in normal operation of the process.
Steam Generation
Steam generation and condensate recovery systems can vary in
complexitydependingonthesteamendusageandprocessrequirements,
e.g., steam for electricity generation or to support a paper mill operation
versus that for a small to mid-size specialty chemical process operation.
Figure 1 is a simplified diagram depicting a basic steam generation
cycle, scalable to virtually any plant requirement whether incorporating
a fire tube or larger water tube type boiler. It should suffice to highlight
critical areas in the cycle where addressing level control concerns can
have a profound impact on efficiency, reliability and maintenance.
At the heart of the system is the boiler/steam drum. Regardless of
size, its primary functions are as follows: to provide ample surface
area (based on steam needs) for the efficient separation of water
and steam; provide storage capacity to meet immediate boiler feed
water requirements or minimize the effects of the introduction of boiler
feed water on the steam generation process; and, to facilitate the
introduction of chemicals for treatment purposes as well as the removal
(blowdown) of impurities.
A boiler, fire or water tube, presents an extremely dynamic environment
with respect to level control regardless of the control strategy—
single-, two-, or three-element. The common denominator in each of
these strategies is the level measurement itself. Applying a technology
that improves on this portion of the equation will most certainly aid in
allowing the boiler/steam drum to better serve its primary purpose
of efficiently separating water and steam. This becomes more
pronounced when fluctuations in demand can have dramatic effects on
an instrument’s performance due to “shrink” and “swell” issues as a
result of pressure changes. In larger-scale steam production such as
that required for commercial power generation (water tube boilers),
disruptions in boiler/steam drum level control can have adverse affects
on the natural circulation of the process and a plant’s ability to respond
to market demand.
Blowdown
Flash Tank
Process Steam
Process Condensate (from condensate receiver tanks)
Deaeration Steam
Heating
Steam
Boiler Feed Water
Makeup Water
Makeup Water-
Treatment
Makeup Water
Chemical Feed System
Plant
Steam
Usage
Boiler/Steam Drum
Boiler Feed Water
Boiler/Steam Drum
MainCondensate Tank
Heat Exchanger
Deaeration and Storage
Figure 1
2
3
Level technologies historically used on boilers rely on inference or
buoyancy to determine the level. This in itself leaves them vulnerable to
process dynamics (specific gravity, pressure, temperature, etc.) or limits
their ability to precisely manage the level for improved fuel economy.
Although corrections can be applied to mitigate the effects, the variables
that need to be accounted for increase the level control’s installation,
hardware and calibration complexity, which has the unintended
consequence of introducing new avenues for error. Eliminating potential
sources of error (including human error) as related to an instrument’s
fundamental technology is the first step in optimizing boiler/steam
drum level control.
A quick peek at various technologies reveals their shortfalls as related to
boiler/steam drum level control:
• Differential Pressure – a complex system of tubing, condensate
pot and transmitter(s) based on inference requiring up to 12 process
parameters to properly calibrate. External inputs and corrections are
applied to ensure accuracy.
• Buoyancy (displacer) – accuracy from startup to operational
temperatures is not achievable due to displacer being designed for the
specific gravity at operational conditions. Calibration and mechanical
wear may introduce errors over time.
• Buoyancy (mechanical switch for on/off control) – a low-cost
solution for smaller boilers; however, introduction of larger volumes
of sub-cooled liquid could affect performance and increase fuel
consumption as compared to a continuous type measurement.
• RF Capacitance – based on the dielectric constant of the process
medium. The dielectric constant of water/condensate changes as a
function of temperature, introducing unnecessary errors. Requires in-
situ callibration.
• Conductivity–highupfrontandprobemaintenancecostsascompared
to other technologies. Not a continuous measurement. Resolution is
contingent on the proximity of adjacent conductivity probes across
the measurement span; Vulnerable to scale accumulation and fouling.
Guided Wave Radar (GWR), on the other hand, is a continuous
measurement technology that has the distinct advantage of not
being vulnerable to changes in process conditions that affect the
aforementioned measurement techniques. Since its performance and
accuracy are not contingent on the specific gravity and/or inference, it
excels in measuring the actual liquid level in all conditions encountered
in the boiler/steam drum. Furthermore, GWR does not require external
inputs or calibration to achieve specified performance — accuracy is
inherent to the technology. This effectively eliminates the introduction
of errors during the calibration process or from external sources, i.e.,
pressure and temperature. A reduction in the number of variables
affecting the measurement provides a high degree of data certainty
allowing operators to better maintain the Normal Water Level (NWL) in
the boiler/steam drum for optimal water/steam separation throughout
a variety of process conditions.
Key benefits of GWR for
boiler/steam drum level
• Three-element control strategy: feedwater flow, main steam
flow and boiler/steam drum level – actual versus inferred
level. Continuous versus discrete indication.
• No calibration or external compensation: data certainty
when implementing control strategy during normal operations
and “shrink  swell” conditions. Prevents over/under carry
conditions.
• Maintaining NWL in all process conditions improves steam/
water separation and overall steam quality.
• Eliminates waste energy due to excessive blowdown to
manage level.
• Responsiveness to changes in demand.
• Steam specific process isolation seal for corrosive high
temperature/high pressure applications.
• Automatic steam/vapor space compensation.
• Simplified trouble analysis and lower maintenance costs.
The hardware and calibration complexity and vulnerability to process conditions introduce
additional costs and potential errors in any given level measurement technology.
Boiler/Steam Drum
Process Steam
Swell
Shrink
Boiler/Steam Drum
Thermal Dispersion
Flow Switch for boiler
feed pump protection
Eclipse®
GWR
Transmitter meets all requirements
of ASME Boiler Code Section 1
Boiler Blowdown/
Blowdown Flash Tank
Boiler
Feed Water
3
Figure 2
4
An aside to the discussion on optimizing level control for improved
operational efficiency of the boiler/steam drums is the sight/gauge
glass requirement delineated in Section 1 of the ASME Boiler Code.
Sight gauges serve a very important role as a backup to boiler/steam
drum level controls so their presence cannot be understated. However,
in continuous service they come with the burden of ongoing, expensive
maintenance costs, along with potential safety concerns.
Eliminating one of the two required sight gauges as provided in
Section 1 of the ASME Boiler Code (above) can substantially reduce
maintenance costs while allowing the remaining sight gauge to be
isolated during day-to-day operation. Oftentimes, the costs associated
with repairing sight gauges on boilers/steam drums as well as other
applications (feedwater heaters/heat exchangers) incorporating these
gauges offset the expense of the new instrument. Significantly reducing
the number of leak points in comparison to a sight glass/gauge is a
bonus when it comes to the safety of plant personnel.	
Deaerator
Another key level application, oftentimes, overlooked when discussing
efficiency is the deaerator with its primary functions being the removal
of oxygen and other corrosive gases from the boiler feed water to
reduce damage to hardware while ensuring sufficient boiler feed water
heater inventory to meet the demand for steam. However, a deaerator
also serves as an “open” type or deaerating feedwater heater not too
dissimilar to a “closed” type or shell and tube feedwater heater. In this
respect, the deaerator performs its function of deaeration while at the
same time using steam, which can give up about 970 Btu per pound, to
preheat the boiler feed water prior to entry into the boiler.
As with any feedwater heater, the level is critical in maintaining a
consistent condensing zone to maximize the transfer of energy from
the steam to the boiler feed water while ensuring adequate boiler feed
water reserves are available. Of course, any appreciable gains in boiler
feed water that can be achieved in the deaerator reduces the amount of
energy (fuel) required at the boiler – every 10.8°F (6°C) rise in boiler
feed water amounts to a one percent savings in fuel cost.
PG−60.1.1 Boilers having a maximum allowable working
pressure exceeding 400 psi (3 MPa) shall have two gauge
glasses.
Instead of one of the two required gauge glasses, two
independent remote water level indicators (two discrete systems
that continuously measure, transmit, and display water level)
may be provided.
PG−60.1.1.2 When two independent remote water level
indicators are in reliable operation (continuously indicating water
level), the one required gauge glass may be shut off, but shall be
maintained in the serviceable condition.
Optimizing the heat exchanger aspects of the deaerator with
enhanced level technologies can improve energy transfer. Every
10.8°F (6°C) rise in boiler feedwater amounts to a 1 percent
savings in fuel.
Aurora®
:
Magnetic Level Indicator with Integral Guided Wave Radar
Makeup Water
Deaeration Steam
from Boiler or
Blowdown Flash Tank
Heating Steam
from Boiler or
Blowdown
Flash Tank
Feed Water to Boiler
Deaeration and Storage
Boiler Feed Water
Common Sight/Gauge Glass Issues
• Steam cuts
• Integral valve failure
• Gasket/seal leakage
• Glass erosion/fatigue
Repair Kit
Seals/Gaskets
Kit with Glass
$660.00
$1,600.00
Shop Time
4 hrs @ $35/hr (est.) $140.00
Installation Time
4 hrs @ $35/hr (est.) $140.00
Vessel/Process
Downtime
1 Day at $$$
4
Figure 3
5
In addition to the “open” or deaerating feedwater heater, the more
common shell and tube or “closed” feedwater heaters can be found
in larger scale steam generation cycles where their costs are offset
by gains in thermal efficiency. How effective a feedwater heater is in
transferring thermal energy is contingent, barring hardware anomalies,
on accurate level control. For more information, consult Magnetrol®
bulletin 41‑296, Heat Rate and Feedwater Heater Level Control.
The same attributes making GWR technology uniquely suited for a
boiler/steam drum application can also be leveraged on the deaerator
and feedwater heaters to provide improvements in thermal efficiency.
Blowdown Flash 
Blowdown Tanks
Maintaining water quality in the boiler within design parameters
maximizes heat transfer while minimizing blowdown of the boiler; both
of which allow better management of fuel and water consumption.
Continuous or manual blowdown of the boiler minimizes scale
accumulation and corrosion resulting from impurities in the water.
The blowdown and blowdown flash tanks provide a means of
accommodating liquid and impurities from the boiler with the latter
facilitating energy recovery through the use of flash steam. Estimates
of up to 49 percent of the energy can be recovered through the use
of flash steam routed to heat exchangers or the deaerator to preheat
boiler makeup water or support the deaeration process, respectively.
Additionally, better level control technology at the boiler side eliminates
energy losses resulting from unnecessary blowdown to prevent false
carryover conditions.
Taking advantage of a specific technology’s ability to reliably address
the level in either of these vessels, especially the blowdown flash
tank, in a plug-and-play type installation and commissioning format
(foregoing calibration, external hardware or inputs) is an easy way to
ensure optimal performance.
Optimizing boiler, deaerator, feedwater heater (heat exchanger/
condenser) and blowdown usage relative to level control primarily
affects fuel economy (heat rate) by better managing the amount of
energy required to produce high quality steam for any given task.
Seamless response to changes in demand and reducing maintenance
associated with the instrumentation or damage to hardware are residual
benefits that have their own financial ramifications; hence, should
also be considered when implementing any technology. The return
on investment time frame can vary depending on the scale of the
operation as well as the time spent maintaining aging instrumentation.
Condensate Recovery
The benefits of any condensate recovery system are well documented in
industries relying on steam generation for their processes. Condensate
hasrealvalueinthateverygallonrecoveredsparesthecostofadditional
makeup water, makeup water treatment and/or wasteful discharge to
municipal or other systems. Oftentimes, it is the instrumentation, or
lack thereof, that limits the performance of the overall system causing
the recovery process to fall short of financial expectations.
Three areas of particular interest relative to efficiency when it comes to
level controls are the condensate receiver and main condensate tanks,
condensate pumps and associated valves as well as any shell and tube
heat exchangers/condensers (Figure 4, next page).
The condensate receiver tanks accept blow-through steam and
condensate from various steam process groups throughout a plant.
Condensate is later pumped to the main condensate tank where it is
stored pending reintroduction into the steam generation cycle. The shell
and tube heat exchanger/condenser allows what would otherwise be
waste energy to be recovered in the form of flash steam from the
receiver tank to preheat makeup water or other process fluids through
the heat of condensation. The resulting condensate drains back to the
condensate or condensate receiver tank.
The level transmitter on the condensate receiver tank facilitates the
automatic management of the condensate level to ensure adequate
capacity is available to accommodate (recover) condensate from
various plant processes as well as maintaining sufficient headspace in
the vessel for the creation of flash steam. Aside from being a critical
asset for the plant, the condensate in the condensate receiver tank also
protects valves and condensate pump seals from direct exposure to
high temperature steam while maintaining a minimum head pressure
on the pump. This prevents hardware damage; expensive maintenance
and downtime of the receiver tank; and subsequent ripple effects on
the steam generation cycle and makeup water requirements. Lastly,
the level transmitter provides the control signals for the valves and
condensate pump necessary to transfer condensate from the receiver
to the main condensate tank, ensuring approximately 15 percent
level retention for the aforementioned reasons. At this point, the main
condensate tank level transmitters take over to manage boiler feed
water supply to service steam generation demand.
5
6 6
Magnetic Level Indicator
with integrated Eclipse®
GWR or standalone GWR
in a chamber/water
column
Heat Exchanger/Condenser
Condensate
Receiver
Tank(s)
Main Condensate Tank
Flash Steam
Process Condensate – Plant Processes
Pumped Condensate
Preheated Makeup
Water to Deaerator
Boiler Feed Water
to Deaerator
Makeup Water
Steam to other Plant Processes
Atlas™
and Jupiter®
Magnetic Level Indicator
with externally attached
magnetostrictive
transmitter
Thermal Dispersion
Aurora®
Protects pumps from
dead head, run out,
overheating and
cavitation
Figure 4
Condensate Recovery
Process Level
• Protect valves  pump seals from
exposure to high temperature steam
• Maintain minimum head pressure on
condensate pump
• Ensure sufficient headspace for flash
steam creation
• Allow capacity to accommodate
condensate from various process
groups
• Manage boiler feedwater supply chain
to meet demand
GWR/MLI Technology
Benefits
• Redundant and diverse level
technologies
• Unaffected by process conditions
• No calibration required
• No moving parts – eliminates
instrument induced errors (GWR)
• Setup wizard and full diagnostics –
fast startup and fault isolation
• Designed for high temperature steam
applications
• Simplifies instrumentation hardware
Case Study
• Pump Seal - $1,000.00
• Labor - two person for ½ day @
$75.00/hr equals $600.00
• Discharged condensate
$3.65/1000 gallons
• Condensate receiver out-of-service for
maintenance $$$
• 1 to 3 pump seal replacements per
week reduced to 1 to 3 per year:
“Pulp  Paper Plant”
• Maintenance cost of poor level control:
$78K to $244K per year
Eliminating Hidden Maintenance Costs
7
Makeup Water Treatment
Makeup water treatment is a critical component of steam generation
in that it is the means to resupply the system with water suitable
for boiler and other operations that, for whatever reason, was lost
in the cycle. Unlike the previous applications discussed in the steam
generation cycle, level control for the water treatment process is not
necessarily about efficiency, but rather, accuracy, reliability and safety
while providing proper inventory management to ensure chemical and
makeup water supply meets demand.
Here the focus is on the chemical component of the water treatment
sinceitpresentsdifficultiesforleveltechnologiesthatmayworkperfectly
on non-chemical applications related to the water treatment process or
those with limited variations in the contents of the vessel’s vapor space.
Although important measurements such as ammonia, acid, caustic and
other chemical storage tanks are not difficult level applications by any
stretch, small nuances in how the vessels are monitored relative to level
technology can have a dramatic effect on the day-to-day practicality
and reliability of the type of instrument(s) used. Additionally, there
are safety considerations when replenishing chemicals as well as long-
term maintenance costs, which can be addressed simultaneously with
inventory monitoring by implementing a few simple, cost-effective
modifications to the instrumentation package.
Chemical storage, demineralization and water header tanks come in
a variety of shapes and sizes, usually, horizontal or vertical vessels
six to ten feet in diameter/height, with the ammonia storage and
demineralizer tanks being the largest. It is not uncommon to see some
type of level transmitter (ultrasonic being the most prevalent) installed
to provide level indication to the control room with a local display at the
base of the tank, either in series with the 4–20 mA transmitter output
or repeated from the control room. The signal to the control room tracks
inventory, acts as a high alarm for overfill protection and establishes the
resupply interval. The local display facilitates monitoring the offload of
chemicals from the supplier’s truck.
Accuracy, reliability and visibility in dynamic vessel environments and
operational scenarios are a level technology’s best attributes when
addressing chemical storage applications. Cost is always an upfront
consideration on these seemingly less complicated measurements.
Nonetheless, performance in these two areas can have a measurable
impact on the “real” cost of ownership for a plant. There is also a
good argument for selecting the appropriate level technology during
the Front End Engineering Design (FEED) phase of a project, as this will
eliminate potential installation and commissioning issues by taking into
consideration the technology in the vessel design — another area of
potential savings.
Any number of level technologies can and have been used to address
chemical storage. Adhering to the principles of minimizing the number of
variables (e.g., vulnerability to process dynamics, calibration, hardware
complexity, etc.) that can affect a technology’s ability to perform as
intended is a key step in reducing the total cost of ownership. Again,
Guided Wave (contact) Radar as well as its Through-Air (non-contact)
Radar counterpart excel in these areas. Magnetic Level Indicators
(MLI) operating in conjunction with either type of radar technology or
coupled with a magnetostrictive level transmitter offer redundancy and
technology diversity while enhancing visibility for improved safety during
resupply operations. There is also the added benefit of redundancy
when verifying the primary transmitter’s performance during periodic
inspections on scheduled outages or while troubleshooting.
This does not imply non-contact ultrasonic level transmitters or other
technologies are not up to the task. Simply put, radar is indifferent to
the changes in the contents of the vapor space of these vessels occurring
throughout the course of the day. Oftentimes, these changes affect a
technology causing what can be referred to as nuisance alarms, e.g.,
intermittent signal loss or when the level indication becomes erratic only
7
High-visibility magnetic level indicator with magnetostrictive transmitter
supports the offloading of ammonia at a combined cycle power plant
Key Components to
Chemical Storage Monitoring
• Inventory Management (accuracy)
• Resistance to chemical attack (reliability  maintenance)
• Utilize a technology that is unaffected by changes in the vapor
space of the vessel (reliability)
• Performance verification (maintenance)
• Visibility during product transfer (safety)
8
to recover about the time a technician arrives on the scene. These types
of issues are difficult to isolate due to their intermittent nature and the
fact they cannot be linked to an installation, configuration or hardware
anomaly.
When discussing the water treatment process supporting any steam
cycle, large or small, it is not a one-size-fits-all concept that provides the
most benefit as related to performance. For as simple as some of these
level applications appear, there is no shortage of instances where they
contribute disproportionately to the commissioning and maintenance
budgets simply because they cannot accommodate the full breadth
of the application dynamics. Opting for a technology-centric versus a
one-size-fits-all approach to applications throughout the water treatment
process reduces both short- and long-term cost of ownership. This allows
for the implementation and realization of the cost benefit of entry-level
technologies for less strenuous applications, while minimizing cost
on those with variations in the vapor space (e.g., steam, chemical
composition, excessive condensation, etc.). All of which can wreck
havoc on an instrument’s performance as well as a plant’s maintenance
budget.
Energy Management
The thrust of this discussion, regardless of the scale of an operation,
centers on identifying key areas of the plant where leveraging the
attributes of a technology in any given scenario has the most profound
effect on efficiency with a quantifiable return on investment falling in
the one- to two-year time frame.
As noted earlier, purchased fuel and electricity consumption are areas
where any improvements in efficiency drop directly to a company’s
bottom line. It makes sense that having the ability to monitor the end-
use location of fuel throughout a facility as well as the consumption
specifics for individual applications — predominately the boiler — can
offer insight to potential areas of improvement. A similar statement can
be made for electricity consumption; whereby reductions can be realized
by simply identifying where the energy is being lost.
In the energy management arena the ability to better monitor
combustion air, fuel gas flow and compressed air can help identify losses
that over short periods of time can affect a plant’s profitability. The two
key phrases when discussing instrumentation for the aforementioned
are “cost effective” and “return on investment.” Without question, any
situation can be resolved if enough financial resources are thrown in its
direction. The idea is to realize the benefit in the shortest time frame
possible at the most reasonable cost. Thermal dispersion mass flow
meters meet these criteria.
Chemical Storage  Water
Treatment Level Technologies
• Radar – Guided Wave (GWR) and Non-Contact for
simplified installation, commissioning and maintenance while
tolerant to a changing vapor space
• Magnetic Level Indicator (MLI) for improved visibility
during resupply; periodic maintenance or performance
verification. Can stand alone or work in conjunction with
other level transmitters to provide redundancy and technology
diversity to critical measurement
• Magnetostrictive transmitter coupled with MLI offers an
alternative to top-mounted level transmitter technologies while
being isolated from vessel contents
• Ultrasonic (non-contact) excellent level solution for
non-chemical or less critical applications in the water treatment
process with limited variations in the vapor space
8
9
Combustion air flow measurement to a boiler is important to
maintain a stoichiometric ratio with the amount of fuel being supplied. 
Too little air flow can result in incomplete combustion along with
additional carbon monoxide or pollutants depending on the fuel being
burned. On the other hand, too much air flow can cool the furnace and
waste heat out of the stack. The repeatability of the air measurement is
essential to obtaining the most efficient air-fuel ratio (AFR).
Measuring fuel gas flow (natural gas or propane) usage to individual
combustion sources compared to the output (steam/hot water) can
help optimize boiler efficiency and better manage energy consumption.
Knowingindividualboilerperformancemayalsoassistinoperatingthose
offering the best efficiency. Lowering fuel consumption is one of the
easiest methods to reduce cost and improve market competitiveness.
A key role in energy and facilities management is making compressed
air systems more reliable and efficient. Valuable resources are wasted
when a leak goes unnoticed or cannot be easily isolated.
The Department of Energy estimates that 20–30% of compressor
output goes to leaks accounting for thousands of dollars in electrical
consumption for wasted air. More extreme cases are the purchase cost
of additional/larger compressors to fulfill compressed air needs. The
first step to reducing utility costs is to measure the usage. Thermal
dispersion technology can be used in branch lines for determining
consumption in different sections of the plant or as a relative indication
of leakage. 
• Repeatability of ±0.5% of reading
• Direct mass flow measurement
• Easy to install in an air duct
• No on-site or in-situ calibration
• Strong signal at low flow rates with high turndown
• Verify calibration in the field
• Easy installation with low pressure drop
• Direct mass flow measurement without the need for pressure
or temperature compensation
• Easy installation with use of an insertion probe with
compression fitting
• Accurate flow measurement under varying pressures
• High turndown and good sensitivity at low flow rates
Thermal Dispersion Mass Flow Meter
Thermal mass flow meters are primarily used in air and gas flow measurement
applications. The meters consist of a transmitter and probe with temperature
sensors (RTDs) located in the pins at the bottom of the probe. The reference sensor
measures the process temperature and the other sensor is heated to a specific
temperature above the reference. As the flow rate increases, heat gets taken
away from the heated sensor. More power is then applied to the heated sensor to
maintain the temperature difference. The relationship between power and mass
flow rate is established during factory calibration.
9
10
Case Study 1*
Steam System Efficiency Optimized
J.R. Simplot Fertilizer Plant
Benefits:
Total annual cost savings: $335,000
Energy savings: 75,000 MMBtu
• Improved Boiler Operation	 • Recycled Steam
• Increase Condensate Recovery	 • Steam Trap Repairs
• Improved Insulation
Project costs: $180,000.00/ROI 6.5 months
Case Study 2*
Improving Steam System Efficiency
Goodyear Tire Plant
Benefits:
Total annual cost savings: $875,000
Energy savings: 93,000 MMBtu
• Optimize Boiler Operation – tune boilers to reduce excess 02, reduce fuel consumption
• Recover Process Waste Heat – installed heat exchanger to raise makeup water temperature using energy in condensate
•	Insulate Process Equipment – lower steam system energy consumption
Total Implementation Project Costs: $180,000/ROI 2.5 months	 * U.S. Department of Energy
10
Summary: Process Optimization through Instrumentation
Although plausible, it is rare to identify a single source of inefficiency
related to poor level controls that impacts a company’s bottom line in the
double digit percentile. More so than not, it is these small incremental
opportunities for improvement across various aspects of the steam
generation cycle, condensate recovery system and waste heat recovery
process that ultimately equate to substantial savings.
• Reduced water consumption, treatment, discharge and
inventory management
• Improved boiler/steam drum control – energy savings and
steam quality
• Reduced fuel consumption – waste heat recovery
• Energy Management – fuel gas, combustion air and
compressed air flow
• Hardware protection  maintenance – pumps and pump seals
Oftentimes, the hidden maintenance costs and inefficiencies associated
with a technology’s vulnerabilities (sustained operation in high pressure
and temperature steam environments; exposure to chemical and other
process conditions; and errors due to the complexity of the measurement
itself and subsequent calibration requirements) are overshadowed by the
day-to-day operation of these processes.
Regardless of the scale of an operation – commercial power generation
or small scale boiler system, leveraging the inherent attributes of
an instrument’s fundamental technology in both the short-term
(engineering, upfront cost, installation and commissioning) and long-
term (maintenance, day-to-day practicality and energy management)
present simple and cost-effective approaches to maximizing the return
on investment in the system itself.
11
Magnetrol®
Instrumentation
See the full product line at:
magnetrol.com
11
Guided Wave Radar Non-Contact Radar
Ultrasonic Buoyancy
Thermal Dispersion Magnetic Level Indication/
Magnetostrictive
12
705 Enterprise Street • Aurora, Illinois 60504-8149 • 630-969-4000 • Fax 630-969-9489 • www.magnetrol.com
Copyright © 2016 Magnetrol International, Incorporated. All rights reserved.
Performance specifications are effective with date of issue and are subject to change without notice.
Magnetrol and Magnetrol logotype, Eclipse, Aurora, Jupiter and Orion Instruments are registered trademarks of Magnetrol International, Incorporated
BULLETIN: 41-298.0
EFFECTIVE: March 2016

Weitere ähnliche Inhalte

Was ist angesagt?

Customer Success Story: Bently Nevada Asset Condition Monitoring
Customer Success Story: Bently Nevada Asset Condition MonitoringCustomer Success Story: Bently Nevada Asset Condition Monitoring
Customer Success Story: Bently Nevada Asset Condition MonitoringGE Measurement & Control
 
Critical Power: Integrating Renewable Power into Buildings
Critical Power: Integrating Renewable Power into BuildingsCritical Power: Integrating Renewable Power into Buildings
Critical Power: Integrating Renewable Power into BuildingsConsultingSpecifyingEngineer
 
11 Things to Know When Owning and Operating a Standby Generator
11 Things to Know When Owning and Operating a Standby Generator11 Things to Know When Owning and Operating a Standby Generator
11 Things to Know When Owning and Operating a Standby GeneratorJessicaSharpee
 
Customer Success Story Bently Nevada* Asset Condition Monitoring
Customer Success Story Bently Nevada* Asset Condition MonitoringCustomer Success Story Bently Nevada* Asset Condition Monitoring
Customer Success Story Bently Nevada* Asset Condition MonitoringGE Measurement & Control
 
Vacon NXP Liquid Cooled
Vacon NXP Liquid CooledVacon NXP Liquid Cooled
Vacon NXP Liquid CooledVacon Plc
 
Immersion Cooling solutions enabling net zero and resiliency
Immersion Cooling solutions enabling net zero and resiliencyImmersion Cooling solutions enabling net zero and resiliency
Immersion Cooling solutions enabling net zero and resiliencyIrene de Groot
 
Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...
Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...
Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...Saltworks Technologies Inc.
 
Immersion Cooling Cryptocurrency Tank Designs
Immersion Cooling Cryptocurrency Tank DesignsImmersion Cooling Cryptocurrency Tank Designs
Immersion Cooling Cryptocurrency Tank DesignsAlaxandria von Hell
 
Denison university success story schneider electric
Denison university success story schneider electricDenison university success story schneider electric
Denison university success story schneider electricSchneider Electric
 
OCP Tech Week Immersion Cooling Optimized IT platforms
OCP Tech Week Immersion Cooling Optimized IT platformsOCP Tech Week Immersion Cooling Optimized IT platforms
OCP Tech Week Immersion Cooling Optimized IT platformsIrene de Groot
 
Aldi widiartono gis eco efficient switchgear
Aldi widiartono gis eco efficient switchgearAldi widiartono gis eco efficient switchgear
Aldi widiartono gis eco efficient switchgearHariSantoso20
 
Energy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesEnergy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesIAEME Publication
 

Was ist angesagt? (18)

Efeicient chillers plant turbo oil free compressor getco
Efeicient chillers plant turbo oil free compressor getcoEfeicient chillers plant turbo oil free compressor getco
Efeicient chillers plant turbo oil free compressor getco
 
Hrsg book
Hrsg bookHrsg book
Hrsg book
 
Banking green pkg general-efficiency strategies techniques to reduce your ene...
Banking green pkg general-efficiency strategies techniques to reduce your ene...Banking green pkg general-efficiency strategies techniques to reduce your ene...
Banking green pkg general-efficiency strategies techniques to reduce your ene...
 
Customer Success Story: Bently Nevada Asset Condition Monitoring
Customer Success Story: Bently Nevada Asset Condition MonitoringCustomer Success Story: Bently Nevada Asset Condition Monitoring
Customer Success Story: Bently Nevada Asset Condition Monitoring
 
Critical Power: Integrating Renewable Power into Buildings
Critical Power: Integrating Renewable Power into BuildingsCritical Power: Integrating Renewable Power into Buildings
Critical Power: Integrating Renewable Power into Buildings
 
Professional life
Professional lifeProfessional life
Professional life
 
11 Things to Know When Owning and Operating a Standby Generator
11 Things to Know When Owning and Operating a Standby Generator11 Things to Know When Owning and Operating a Standby Generator
11 Things to Know When Owning and Operating a Standby Generator
 
Customer Success Story Bently Nevada* Asset Condition Monitoring
Customer Success Story Bently Nevada* Asset Condition MonitoringCustomer Success Story Bently Nevada* Asset Condition Monitoring
Customer Success Story Bently Nevada* Asset Condition Monitoring
 
Vacon NXP Liquid Cooled
Vacon NXP Liquid CooledVacon NXP Liquid Cooled
Vacon NXP Liquid Cooled
 
Immersion Cooling solutions enabling net zero and resiliency
Immersion Cooling solutions enabling net zero and resiliencyImmersion Cooling solutions enabling net zero and resiliency
Immersion Cooling solutions enabling net zero and resiliency
 
Getco green earth technology profile_presentation_2017_ تعريف نشاطات شركة تكن...
Getco green earth technology profile_presentation_2017_ تعريف نشاطات شركة تكن...Getco green earth technology profile_presentation_2017_ تعريف نشاطات شركة تكن...
Getco green earth technology profile_presentation_2017_ تعريف نشاطات شركة تكن...
 
Hot Water for Industry
Hot Water for IndustryHot Water for Industry
Hot Water for Industry
 
Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...
Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...
Ammonia Wastewater Treatment: Wastewater Treatment Plant (WWTP) Centrate & La...
 
Immersion Cooling Cryptocurrency Tank Designs
Immersion Cooling Cryptocurrency Tank DesignsImmersion Cooling Cryptocurrency Tank Designs
Immersion Cooling Cryptocurrency Tank Designs
 
Denison university success story schneider electric
Denison university success story schneider electricDenison university success story schneider electric
Denison university success story schneider electric
 
OCP Tech Week Immersion Cooling Optimized IT platforms
OCP Tech Week Immersion Cooling Optimized IT platformsOCP Tech Week Immersion Cooling Optimized IT platforms
OCP Tech Week Immersion Cooling Optimized IT platforms
 
Aldi widiartono gis eco efficient switchgear
Aldi widiartono gis eco efficient switchgearAldi widiartono gis eco efficient switchgear
Aldi widiartono gis eco efficient switchgear
 
Energy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesEnergy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drives
 

Andere mochten auch

Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...
Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...
Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...M.S. Jacobs & Associates
 
Personall Knowledge Networks
Personall Knowledge NetworksPersonall Knowledge Networks
Personall Knowledge NetworksPersonall SAS
 
Certified Angus Beef
Certified Angus BeefCertified Angus Beef
Certified Angus BeefModicum
 
Presentatie Aspect ICT algemeen
Presentatie Aspect  ICT algemeenPresentatie Aspect  ICT algemeen
Presentatie Aspect ICT algemeenJanWillemR
 
Roberts_Aaron_PPPpresentation_1601
Roberts_Aaron_PPPpresentation_1601Roberts_Aaron_PPPpresentation_1601
Roberts_Aaron_PPPpresentation_1601Aaron Roberts
 
Kişişsel satış
Kişişsel satışKişişsel satış
Kişişsel satışKeskin Bicak
 
Comment Aborder Un Exercice (Ou Un ProblèMe
Comment Aborder Un Exercice (Ou Un ProblèMeComment Aborder Un Exercice (Ou Un ProblèMe
Comment Aborder Un Exercice (Ou Un ProblèMeMRFB
 
Innovatie robert esseboom bo 20160413
Innovatie robert esseboom bo 20160413Innovatie robert esseboom bo 20160413
Innovatie robert esseboom bo 20160413Robert Esseboom
 
Float and thermostatic steam traps for condensate return
Float and thermostatic steam traps for condensate returnFloat and thermostatic steam traps for condensate return
Float and thermostatic steam traps for condensate returnM.S. Jacobs & Associates
 
Informe final segurida salud laboral frederich perez
Informe final segurida salud laboral frederich perezInforme final segurida salud laboral frederich perez
Informe final segurida salud laboral frederich perezfrederich johan perez
 
Meetup_FVGA_User_acquisition_Ankama_Ingrid Florin Muller
Meetup_FVGA_User_acquisition_Ankama_Ingrid Florin MullerMeetup_FVGA_User_acquisition_Ankama_Ingrid Florin Muller
Meetup_FVGA_User_acquisition_Ankama_Ingrid Florin MullerJohan-André Jeanville
 
Multivariable Flowmeters for Process Measurement & Control
Multivariable Flowmeters for Process Measurement & ControlMultivariable Flowmeters for Process Measurement & Control
Multivariable Flowmeters for Process Measurement & ControlM.S. Jacobs & Associates
 
Cyber Defense - Annunciators as watcher for critical process applications
Cyber Defense - Annunciators as watcher for critical process applicationsCyber Defense - Annunciators as watcher for critical process applications
Cyber Defense - Annunciators as watcher for critical process applicationsM.S. Jacobs & Associates
 
Monitoring genset systems in standby mode to assure reliable startup
Monitoring genset systems in standby mode to assure reliable startupMonitoring genset systems in standby mode to assure reliable startup
Monitoring genset systems in standby mode to assure reliable startupM.S. Jacobs & Associates
 

Andere mochten auch (18)

Turbine Liquid Flow Meters
Turbine Liquid Flow MetersTurbine Liquid Flow Meters
Turbine Liquid Flow Meters
 
Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...
Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...
Comparing Level Measurement Methods: Displacment Transmitter vs Differential ...
 
Personall Knowledge Networks
Personall Knowledge NetworksPersonall Knowledge Networks
Personall Knowledge Networks
 
Certified Angus Beef
Certified Angus BeefCertified Angus Beef
Certified Angus Beef
 
Orion magnetic level selection guide
Orion magnetic level selection guideOrion magnetic level selection guide
Orion magnetic level selection guide
 
5 (1)
5 (1)5 (1)
5 (1)
 
Presentatie Aspect ICT algemeen
Presentatie Aspect  ICT algemeenPresentatie Aspect  ICT algemeen
Presentatie Aspect ICT algemeen
 
Roberts_Aaron_PPPpresentation_1601
Roberts_Aaron_PPPpresentation_1601Roberts_Aaron_PPPpresentation_1601
Roberts_Aaron_PPPpresentation_1601
 
Kişişsel satış
Kişişsel satışKişişsel satış
Kişişsel satış
 
Comment Aborder Un Exercice (Ou Un ProblèMe
Comment Aborder Un Exercice (Ou Un ProblèMeComment Aborder Un Exercice (Ou Un ProblèMe
Comment Aborder Un Exercice (Ou Un ProblèMe
 
Innovatie robert esseboom bo 20160413
Innovatie robert esseboom bo 20160413Innovatie robert esseboom bo 20160413
Innovatie robert esseboom bo 20160413
 
Float and thermostatic steam traps for condensate return
Float and thermostatic steam traps for condensate returnFloat and thermostatic steam traps for condensate return
Float and thermostatic steam traps for condensate return
 
Informe final segurida salud laboral frederich perez
Informe final segurida salud laboral frederich perezInforme final segurida salud laboral frederich perez
Informe final segurida salud laboral frederich perez
 
Meetup_FVGA_User_acquisition_Ankama_Ingrid Florin Muller
Meetup_FVGA_User_acquisition_Ankama_Ingrid Florin MullerMeetup_FVGA_User_acquisition_Ankama_Ingrid Florin Muller
Meetup_FVGA_User_acquisition_Ankama_Ingrid Florin Muller
 
Multivariable Flowmeters for Process Measurement & Control
Multivariable Flowmeters for Process Measurement & ControlMultivariable Flowmeters for Process Measurement & Control
Multivariable Flowmeters for Process Measurement & Control
 
Cyber Defense - Annunciators as watcher for critical process applications
Cyber Defense - Annunciators as watcher for critical process applicationsCyber Defense - Annunciators as watcher for critical process applications
Cyber Defense - Annunciators as watcher for critical process applications
 
Kfc
KfcKfc
Kfc
 
Monitoring genset systems in standby mode to assure reliable startup
Monitoring genset systems in standby mode to assure reliable startupMonitoring genset systems in standby mode to assure reliable startup
Monitoring genset systems in standby mode to assure reliable startup
 

Ähnlich wie Optimizing the Steam Generation Cycle and Condensate Recovery Process

Energy Auditing of Thermal Power plant
Energy Auditing of Thermal Power plantEnergy Auditing of Thermal Power plant
Energy Auditing of Thermal Power plantIRJET Journal
 
General Water Treatment For Cooling Water
General Water Treatment For Cooling WaterGeneral Water Treatment For Cooling Water
General Water Treatment For Cooling WaterGerard B. Hawkins
 
Review on Boiler Control Automation for Sugar Industries
Review on Boiler Control Automation for Sugar IndustriesReview on Boiler Control Automation for Sugar Industries
Review on Boiler Control Automation for Sugar IndustriesIRJET Journal
 
IJSRED-V2I2P6
IJSRED-V2I2P6IJSRED-V2I2P6
IJSRED-V2I2P6IJSRED
 
PPCHEM- Power Plant Chemistry .pdf
PPCHEM- Power Plant Chemistry .pdfPPCHEM- Power Plant Chemistry .pdf
PPCHEM- Power Plant Chemistry .pdfMohamedHusseinHamed
 
OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR
OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR
OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR eecfncci
 
96924703 performance-monitoring-for-gas-turbine
96924703 performance-monitoring-for-gas-turbine96924703 performance-monitoring-for-gas-turbine
96924703 performance-monitoring-for-gas-turbinemanojg1990
 
Case Study - STP Power Saving - Bacterial Culture
Case Study - STP Power Saving - Bacterial CultureCase Study - STP Power Saving - Bacterial Culture
Case Study - STP Power Saving - Bacterial CultureFermenta Biotech Ltd
 
IRJET- Design and Fabrication of “Cavitation Water Heater”
IRJET-  	  Design and Fabrication of “Cavitation Water Heater”IRJET-  	  Design and Fabrication of “Cavitation Water Heater”
IRJET- Design and Fabrication of “Cavitation Water Heater”IRJET Journal
 
Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...
Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...
Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...IJERA Editor
 
Analysis of Process Parameters to Improve Power Plant Efficiency
Analysis of Process Parameters to Improve Power Plant EfficiencyAnalysis of Process Parameters to Improve Power Plant Efficiency
Analysis of Process Parameters to Improve Power Plant EfficiencyIOSRJMCE
 
Energy saving in cooling towers by using variable frequency drives (1)
Energy saving in cooling towers by using variable frequency drives (1)Energy saving in cooling towers by using variable frequency drives (1)
Energy saving in cooling towers by using variable frequency drives (1)IAEME Publication
 
Energy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesEnergy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesIAEME Publication
 
Energy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesEnergy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesIAEME Publication
 
Ammonia plant efficiency
Ammonia plant efficiencyAmmonia plant efficiency
Ammonia plant efficiencyHimanshu Sharma
 
Condition monitoring of_steam_turbines_by_performa
Condition monitoring of_steam_turbines_by_performaCondition monitoring of_steam_turbines_by_performa
Condition monitoring of_steam_turbines_by_performaUdhayakumar Venkataraman
 

Ähnlich wie Optimizing the Steam Generation Cycle and Condensate Recovery Process (20)

Soot blowing and advantages
Soot blowing and advantagesSoot blowing and advantages
Soot blowing and advantages
 
Energy Auditing of Thermal Power plant
Energy Auditing of Thermal Power plantEnergy Auditing of Thermal Power plant
Energy Auditing of Thermal Power plant
 
Deck on consultancy, training and audits v0.1
Deck on consultancy, training and audits v0.1Deck on consultancy, training and audits v0.1
Deck on consultancy, training and audits v0.1
 
General Water Treatment For Cooling Water
General Water Treatment For Cooling WaterGeneral Water Treatment For Cooling Water
General Water Treatment For Cooling Water
 
Review on Boiler Control Automation for Sugar Industries
Review on Boiler Control Automation for Sugar IndustriesReview on Boiler Control Automation for Sugar Industries
Review on Boiler Control Automation for Sugar Industries
 
IJSRED-V2I2P6
IJSRED-V2I2P6IJSRED-V2I2P6
IJSRED-V2I2P6
 
PPCHEM- Power Plant Chemistry .pdf
PPCHEM- Power Plant Chemistry .pdfPPCHEM- Power Plant Chemistry .pdf
PPCHEM- Power Plant Chemistry .pdf
 
OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR
OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR
OVERVIEW OF COGENERATION OPPORTUNITIES IN NEPALESE SUGAR SECTOR
 
96924703 performance-monitoring-for-gas-turbine
96924703 performance-monitoring-for-gas-turbine96924703 performance-monitoring-for-gas-turbine
96924703 performance-monitoring-for-gas-turbine
 
Case Study - STP Power Saving - Bacterial Culture
Case Study - STP Power Saving - Bacterial CultureCase Study - STP Power Saving - Bacterial Culture
Case Study - STP Power Saving - Bacterial Culture
 
IRJET- Design and Fabrication of “Cavitation Water Heater”
IRJET-  	  Design and Fabrication of “Cavitation Water Heater”IRJET-  	  Design and Fabrication of “Cavitation Water Heater”
IRJET- Design and Fabrication of “Cavitation Water Heater”
 
Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...
Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...
Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Techno...
 
Analysis of Process Parameters to Improve Power Plant Efficiency
Analysis of Process Parameters to Improve Power Plant EfficiencyAnalysis of Process Parameters to Improve Power Plant Efficiency
Analysis of Process Parameters to Improve Power Plant Efficiency
 
Electric Process Heaters
Electric Process HeatersElectric Process Heaters
Electric Process Heaters
 
Energy saving in cooling towers by using variable frequency drives (1)
Energy saving in cooling towers by using variable frequency drives (1)Energy saving in cooling towers by using variable frequency drives (1)
Energy saving in cooling towers by using variable frequency drives (1)
 
Energy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesEnergy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drives
 
Energy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drivesEnergy saving in cooling towers by using variable frequency drives
Energy saving in cooling towers by using variable frequency drives
 
Ammonia plant efficiency
Ammonia plant efficiencyAmmonia plant efficiency
Ammonia plant efficiency
 
Condition monitoring of_steam_turbines_by_performa
Condition monitoring of_steam_turbines_by_performaCondition monitoring of_steam_turbines_by_performa
Condition monitoring of_steam_turbines_by_performa
 
1q05 performancemonitoring
1q05 performancemonitoring1q05 performancemonitoring
1q05 performancemonitoring
 

Kürzlich hochgeladen

FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756dollysharma2066
 
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlyKubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlysanyuktamishra911
 
Design For Accessibility: Getting it right from the start
Design For Accessibility: Getting it right from the startDesign For Accessibility: Getting it right from the start
Design For Accessibility: Getting it right from the startQuintin Balsdon
 
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdfONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdfKamal Acharya
 
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete RecordCCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete RecordAsst.prof M.Gokilavani
 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXssuser89054b
 
VIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 Booking
VIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 BookingVIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 Booking
VIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 Bookingdharasingh5698
 
Call Girls Wakad Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Wakad Call Me 7737669865 Budget Friendly No Advance BookingCall Girls Wakad Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Wakad Call Me 7737669865 Budget Friendly No Advance Bookingroncy bisnoi
 
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance BookingCall Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Bookingroncy bisnoi
 
chapter 5.pptx: drainage and irrigation engineering
chapter 5.pptx: drainage and irrigation engineeringchapter 5.pptx: drainage and irrigation engineering
chapter 5.pptx: drainage and irrigation engineeringmulugeta48
 
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
Booking open Available Pune Call Girls Pargaon  6297143586 Call Hot Indian Gi...Booking open Available Pune Call Girls Pargaon  6297143586 Call Hot Indian Gi...
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...Call Girls in Nagpur High Profile
 
Double Revolving field theory-how the rotor develops torque
Double Revolving field theory-how the rotor develops torqueDouble Revolving field theory-how the rotor develops torque
Double Revolving field theory-how the rotor develops torqueBhangaleSonal
 
Unleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leapUnleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leapRishantSharmaFr
 
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...Arindam Chakraborty, Ph.D., P.E. (CA, TX)
 
Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank  Design by Working Stress - IS Method.pdfIntze Overhead Water Tank  Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank Design by Working Stress - IS Method.pdfSuman Jyoti
 
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...Call Girls in Nagpur High Profile
 
Unit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdfUnit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdfRagavanV2
 

Kürzlich hochgeladen (20)

FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
 
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlyKubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghly
 
Design For Accessibility: Getting it right from the start
Design For Accessibility: Getting it right from the startDesign For Accessibility: Getting it right from the start
Design For Accessibility: Getting it right from the start
 
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdfONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
 
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete RecordCCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
 
VIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 Booking
VIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 BookingVIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 Booking
VIP Call Girls Ankleshwar 7001035870 Whatsapp Number, 24/07 Booking
 
Call Girls Wakad Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Wakad Call Me 7737669865 Budget Friendly No Advance BookingCall Girls Wakad Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Wakad Call Me 7737669865 Budget Friendly No Advance Booking
 
FEA Based Level 3 Assessment of Deformed Tanks with Fluid Induced Loads
FEA Based Level 3 Assessment of Deformed Tanks with Fluid Induced LoadsFEA Based Level 3 Assessment of Deformed Tanks with Fluid Induced Loads
FEA Based Level 3 Assessment of Deformed Tanks with Fluid Induced Loads
 
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance BookingCall Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
 
chapter 5.pptx: drainage and irrigation engineering
chapter 5.pptx: drainage and irrigation engineeringchapter 5.pptx: drainage and irrigation engineering
chapter 5.pptx: drainage and irrigation engineering
 
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
Booking open Available Pune Call Girls Pargaon  6297143586 Call Hot Indian Gi...Booking open Available Pune Call Girls Pargaon  6297143586 Call Hot Indian Gi...
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
 
Double Revolving field theory-how the rotor develops torque
Double Revolving field theory-how the rotor develops torqueDouble Revolving field theory-how the rotor develops torque
Double Revolving field theory-how the rotor develops torque
 
Unleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leapUnleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leap
 
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
 
Call Now ≽ 9953056974 ≼🔝 Call Girls In New Ashok Nagar ≼🔝 Delhi door step de...
Call Now ≽ 9953056974 ≼🔝 Call Girls In New Ashok Nagar  ≼🔝 Delhi door step de...Call Now ≽ 9953056974 ≼🔝 Call Girls In New Ashok Nagar  ≼🔝 Delhi door step de...
Call Now ≽ 9953056974 ≼🔝 Call Girls In New Ashok Nagar ≼🔝 Delhi door step de...
 
Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank  Design by Working Stress - IS Method.pdfIntze Overhead Water Tank  Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
 
Call Girls in Netaji Nagar, Delhi 💯 Call Us 🔝9953056974 🔝 Escort Service
Call Girls in Netaji Nagar, Delhi 💯 Call Us 🔝9953056974 🔝 Escort ServiceCall Girls in Netaji Nagar, Delhi 💯 Call Us 🔝9953056974 🔝 Escort Service
Call Girls in Netaji Nagar, Delhi 💯 Call Us 🔝9953056974 🔝 Escort Service
 
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
 
Unit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdfUnit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdf
 

Optimizing the Steam Generation Cycle and Condensate Recovery Process

  • 1. 1 “The U.S. pulp and paper industry—defined as facilities engaged in the manufacture of pulp, paper, and paperboard—consumes over $7 billion worth of purchased fuels and electricity per year. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility.” Berkeley National Laboratory Environmental Energy Technologies Division, October 2009. Objective To identify key areas in the steam generation cycle, condensate recovery system and waste heat recovery process where cost-effective instrumentation solutions offer a tangible return on investment over the short term. The goal is to reduce heat rate, environmental impact, fuel and water consumption, water treatment and maintenance costs in commercial and heavy industries where steam generation is essential to the production processes. Overview • Why control? • Steam generation Boiler/steam drum Deaeration Blowdown • Condensate and waste heat recovery Cost benefits of condensate recovery Condensate receiver tanks Pump protection Flash tanks and heat exchangers/condensers • Water chemistry and treatment Chemical storage monitoring • Energy management Combustion air, fuel flow & compressed air Why Control? Although the pulp and paper industry is one of the largest producers of steam outside power generation, the primary metals, petroleum refining, chemical process, and food processing industries also allocate significant portions of their total energy consumption, anywhere from 10% to 60%, to the production of steam. Instrumentation plays an importantroleinkeyapplicationsthroughoutthesteamgenerationcycle. As a consequence, the performance of any level technology relative to instrument induced errors, calibration nuances, and vulnerabilities to process dynamics can have an immediate and adverse impact on fuel consumptionwhilecontributingnegativelyinotheraspectsoftheprocess be it makeup water requirements, excessive boiler blowdown, energy transfer, etc. Unfortunately, these other aspects of the process indirectly contribute to the inefficient use of fuel and hinder production throughput and product quality. Adding to this burden is the potential for damage to expensive hardware resulting in forced outages, unscheduled, costly maintenance, and production downtime. It is not an uncommon practice in this day and age to employ a waste heat and/or condensate recovery process to reduce energy losses and capture valuable condensate. The use of instrumentation technology that cannot adequately or reliably address the control aspects of these processes can inhibit the effectiveness and overall return on investment in these systems or expose hardware to unnecessary damage. Furthermore, processes where electricity consumption and steam generation represent a disproportionate amount of the fuel cost can be plagued with inefficiencies simply due to a technology’s shortcomings Donald Hite, Business Development Manager Magnetrol® International and Orion Instruments® Optimizing the Steam Generation Cycle and Condensate Recovery Process for Profit
  • 2. 2 on critical applications which adversely affect heat rate. Of course, this depends on the fuel type as well as other factors. Nonetheless, when properly addressed, these areas have an immediate and positive impact on costs. An overview of the processes involved, along with the unique instrumentation requirements for each component, offers insight into the significance of maintaining proper level control and protective measures to realize potential savings in steam generation, waste heat and condensate recovery and water treatment systems common in heavy industry. In essence, it is not a one-size-fits-all scenario; rather by providing the proper level technology to enhance performance in specific areas throughout the process to maintain market share in a highly competitive global arena. This paper will highlight the individual areas where the application of specific level control technologies can improve overall performance. As price is usually a key consideration, severe service applications leverage technologies where the cost benefits are realized over the short and long terms and are linked directly to efficiency. More consideration is typically given to the front-end cost on applications having the least effect on efficiency of the process; but, in reality, reliable measurement is a key factor in normal operation of the process. Steam Generation Steam generation and condensate recovery systems can vary in complexitydependingonthesteamendusageandprocessrequirements, e.g., steam for electricity generation or to support a paper mill operation versus that for a small to mid-size specialty chemical process operation. Figure 1 is a simplified diagram depicting a basic steam generation cycle, scalable to virtually any plant requirement whether incorporating a fire tube or larger water tube type boiler. It should suffice to highlight critical areas in the cycle where addressing level control concerns can have a profound impact on efficiency, reliability and maintenance. At the heart of the system is the boiler/steam drum. Regardless of size, its primary functions are as follows: to provide ample surface area (based on steam needs) for the efficient separation of water and steam; provide storage capacity to meet immediate boiler feed water requirements or minimize the effects of the introduction of boiler feed water on the steam generation process; and, to facilitate the introduction of chemicals for treatment purposes as well as the removal (blowdown) of impurities. A boiler, fire or water tube, presents an extremely dynamic environment with respect to level control regardless of the control strategy— single-, two-, or three-element. The common denominator in each of these strategies is the level measurement itself. Applying a technology that improves on this portion of the equation will most certainly aid in allowing the boiler/steam drum to better serve its primary purpose of efficiently separating water and steam. This becomes more pronounced when fluctuations in demand can have dramatic effects on an instrument’s performance due to “shrink” and “swell” issues as a result of pressure changes. In larger-scale steam production such as that required for commercial power generation (water tube boilers), disruptions in boiler/steam drum level control can have adverse affects on the natural circulation of the process and a plant’s ability to respond to market demand. Blowdown Flash Tank Process Steam Process Condensate (from condensate receiver tanks) Deaeration Steam Heating Steam Boiler Feed Water Makeup Water Makeup Water- Treatment Makeup Water Chemical Feed System Plant Steam Usage Boiler/Steam Drum Boiler Feed Water Boiler/Steam Drum MainCondensate Tank Heat Exchanger Deaeration and Storage Figure 1 2
  • 3. 3 Level technologies historically used on boilers rely on inference or buoyancy to determine the level. This in itself leaves them vulnerable to process dynamics (specific gravity, pressure, temperature, etc.) or limits their ability to precisely manage the level for improved fuel economy. Although corrections can be applied to mitigate the effects, the variables that need to be accounted for increase the level control’s installation, hardware and calibration complexity, which has the unintended consequence of introducing new avenues for error. Eliminating potential sources of error (including human error) as related to an instrument’s fundamental technology is the first step in optimizing boiler/steam drum level control. A quick peek at various technologies reveals their shortfalls as related to boiler/steam drum level control: • Differential Pressure – a complex system of tubing, condensate pot and transmitter(s) based on inference requiring up to 12 process parameters to properly calibrate. External inputs and corrections are applied to ensure accuracy. • Buoyancy (displacer) – accuracy from startup to operational temperatures is not achievable due to displacer being designed for the specific gravity at operational conditions. Calibration and mechanical wear may introduce errors over time. • Buoyancy (mechanical switch for on/off control) – a low-cost solution for smaller boilers; however, introduction of larger volumes of sub-cooled liquid could affect performance and increase fuel consumption as compared to a continuous type measurement. • RF Capacitance – based on the dielectric constant of the process medium. The dielectric constant of water/condensate changes as a function of temperature, introducing unnecessary errors. Requires in- situ callibration. • Conductivity–highupfrontandprobemaintenancecostsascompared to other technologies. Not a continuous measurement. Resolution is contingent on the proximity of adjacent conductivity probes across the measurement span; Vulnerable to scale accumulation and fouling. Guided Wave Radar (GWR), on the other hand, is a continuous measurement technology that has the distinct advantage of not being vulnerable to changes in process conditions that affect the aforementioned measurement techniques. Since its performance and accuracy are not contingent on the specific gravity and/or inference, it excels in measuring the actual liquid level in all conditions encountered in the boiler/steam drum. Furthermore, GWR does not require external inputs or calibration to achieve specified performance — accuracy is inherent to the technology. This effectively eliminates the introduction of errors during the calibration process or from external sources, i.e., pressure and temperature. A reduction in the number of variables affecting the measurement provides a high degree of data certainty allowing operators to better maintain the Normal Water Level (NWL) in the boiler/steam drum for optimal water/steam separation throughout a variety of process conditions. Key benefits of GWR for boiler/steam drum level • Three-element control strategy: feedwater flow, main steam flow and boiler/steam drum level – actual versus inferred level. Continuous versus discrete indication. • No calibration or external compensation: data certainty when implementing control strategy during normal operations and “shrink swell” conditions. Prevents over/under carry conditions. • Maintaining NWL in all process conditions improves steam/ water separation and overall steam quality. • Eliminates waste energy due to excessive blowdown to manage level. • Responsiveness to changes in demand. • Steam specific process isolation seal for corrosive high temperature/high pressure applications. • Automatic steam/vapor space compensation. • Simplified trouble analysis and lower maintenance costs. The hardware and calibration complexity and vulnerability to process conditions introduce additional costs and potential errors in any given level measurement technology. Boiler/Steam Drum Process Steam Swell Shrink Boiler/Steam Drum Thermal Dispersion Flow Switch for boiler feed pump protection Eclipse® GWR Transmitter meets all requirements of ASME Boiler Code Section 1 Boiler Blowdown/ Blowdown Flash Tank Boiler Feed Water 3 Figure 2
  • 4. 4 An aside to the discussion on optimizing level control for improved operational efficiency of the boiler/steam drums is the sight/gauge glass requirement delineated in Section 1 of the ASME Boiler Code. Sight gauges serve a very important role as a backup to boiler/steam drum level controls so their presence cannot be understated. However, in continuous service they come with the burden of ongoing, expensive maintenance costs, along with potential safety concerns. Eliminating one of the two required sight gauges as provided in Section 1 of the ASME Boiler Code (above) can substantially reduce maintenance costs while allowing the remaining sight gauge to be isolated during day-to-day operation. Oftentimes, the costs associated with repairing sight gauges on boilers/steam drums as well as other applications (feedwater heaters/heat exchangers) incorporating these gauges offset the expense of the new instrument. Significantly reducing the number of leak points in comparison to a sight glass/gauge is a bonus when it comes to the safety of plant personnel. Deaerator Another key level application, oftentimes, overlooked when discussing efficiency is the deaerator with its primary functions being the removal of oxygen and other corrosive gases from the boiler feed water to reduce damage to hardware while ensuring sufficient boiler feed water heater inventory to meet the demand for steam. However, a deaerator also serves as an “open” type or deaerating feedwater heater not too dissimilar to a “closed” type or shell and tube feedwater heater. In this respect, the deaerator performs its function of deaeration while at the same time using steam, which can give up about 970 Btu per pound, to preheat the boiler feed water prior to entry into the boiler. As with any feedwater heater, the level is critical in maintaining a consistent condensing zone to maximize the transfer of energy from the steam to the boiler feed water while ensuring adequate boiler feed water reserves are available. Of course, any appreciable gains in boiler feed water that can be achieved in the deaerator reduces the amount of energy (fuel) required at the boiler – every 10.8°F (6°C) rise in boiler feed water amounts to a one percent savings in fuel cost. PG−60.1.1 Boilers having a maximum allowable working pressure exceeding 400 psi (3 MPa) shall have two gauge glasses. Instead of one of the two required gauge glasses, two independent remote water level indicators (two discrete systems that continuously measure, transmit, and display water level) may be provided. PG−60.1.1.2 When two independent remote water level indicators are in reliable operation (continuously indicating water level), the one required gauge glass may be shut off, but shall be maintained in the serviceable condition. Optimizing the heat exchanger aspects of the deaerator with enhanced level technologies can improve energy transfer. Every 10.8°F (6°C) rise in boiler feedwater amounts to a 1 percent savings in fuel. Aurora® : Magnetic Level Indicator with Integral Guided Wave Radar Makeup Water Deaeration Steam from Boiler or Blowdown Flash Tank Heating Steam from Boiler or Blowdown Flash Tank Feed Water to Boiler Deaeration and Storage Boiler Feed Water Common Sight/Gauge Glass Issues • Steam cuts • Integral valve failure • Gasket/seal leakage • Glass erosion/fatigue Repair Kit Seals/Gaskets Kit with Glass $660.00 $1,600.00 Shop Time 4 hrs @ $35/hr (est.) $140.00 Installation Time 4 hrs @ $35/hr (est.) $140.00 Vessel/Process Downtime 1 Day at $$$ 4 Figure 3
  • 5. 5 In addition to the “open” or deaerating feedwater heater, the more common shell and tube or “closed” feedwater heaters can be found in larger scale steam generation cycles where their costs are offset by gains in thermal efficiency. How effective a feedwater heater is in transferring thermal energy is contingent, barring hardware anomalies, on accurate level control. For more information, consult Magnetrol® bulletin 41‑296, Heat Rate and Feedwater Heater Level Control. The same attributes making GWR technology uniquely suited for a boiler/steam drum application can also be leveraged on the deaerator and feedwater heaters to provide improvements in thermal efficiency. Blowdown Flash Blowdown Tanks Maintaining water quality in the boiler within design parameters maximizes heat transfer while minimizing blowdown of the boiler; both of which allow better management of fuel and water consumption. Continuous or manual blowdown of the boiler minimizes scale accumulation and corrosion resulting from impurities in the water. The blowdown and blowdown flash tanks provide a means of accommodating liquid and impurities from the boiler with the latter facilitating energy recovery through the use of flash steam. Estimates of up to 49 percent of the energy can be recovered through the use of flash steam routed to heat exchangers or the deaerator to preheat boiler makeup water or support the deaeration process, respectively. Additionally, better level control technology at the boiler side eliminates energy losses resulting from unnecessary blowdown to prevent false carryover conditions. Taking advantage of a specific technology’s ability to reliably address the level in either of these vessels, especially the blowdown flash tank, in a plug-and-play type installation and commissioning format (foregoing calibration, external hardware or inputs) is an easy way to ensure optimal performance. Optimizing boiler, deaerator, feedwater heater (heat exchanger/ condenser) and blowdown usage relative to level control primarily affects fuel economy (heat rate) by better managing the amount of energy required to produce high quality steam for any given task. Seamless response to changes in demand and reducing maintenance associated with the instrumentation or damage to hardware are residual benefits that have their own financial ramifications; hence, should also be considered when implementing any technology. The return on investment time frame can vary depending on the scale of the operation as well as the time spent maintaining aging instrumentation. Condensate Recovery The benefits of any condensate recovery system are well documented in industries relying on steam generation for their processes. Condensate hasrealvalueinthateverygallonrecoveredsparesthecostofadditional makeup water, makeup water treatment and/or wasteful discharge to municipal or other systems. Oftentimes, it is the instrumentation, or lack thereof, that limits the performance of the overall system causing the recovery process to fall short of financial expectations. Three areas of particular interest relative to efficiency when it comes to level controls are the condensate receiver and main condensate tanks, condensate pumps and associated valves as well as any shell and tube heat exchangers/condensers (Figure 4, next page). The condensate receiver tanks accept blow-through steam and condensate from various steam process groups throughout a plant. Condensate is later pumped to the main condensate tank where it is stored pending reintroduction into the steam generation cycle. The shell and tube heat exchanger/condenser allows what would otherwise be waste energy to be recovered in the form of flash steam from the receiver tank to preheat makeup water or other process fluids through the heat of condensation. The resulting condensate drains back to the condensate or condensate receiver tank. The level transmitter on the condensate receiver tank facilitates the automatic management of the condensate level to ensure adequate capacity is available to accommodate (recover) condensate from various plant processes as well as maintaining sufficient headspace in the vessel for the creation of flash steam. Aside from being a critical asset for the plant, the condensate in the condensate receiver tank also protects valves and condensate pump seals from direct exposure to high temperature steam while maintaining a minimum head pressure on the pump. This prevents hardware damage; expensive maintenance and downtime of the receiver tank; and subsequent ripple effects on the steam generation cycle and makeup water requirements. Lastly, the level transmitter provides the control signals for the valves and condensate pump necessary to transfer condensate from the receiver to the main condensate tank, ensuring approximately 15 percent level retention for the aforementioned reasons. At this point, the main condensate tank level transmitters take over to manage boiler feed water supply to service steam generation demand. 5
  • 6. 6 6 Magnetic Level Indicator with integrated Eclipse® GWR or standalone GWR in a chamber/water column Heat Exchanger/Condenser Condensate Receiver Tank(s) Main Condensate Tank Flash Steam Process Condensate – Plant Processes Pumped Condensate Preheated Makeup Water to Deaerator Boiler Feed Water to Deaerator Makeup Water Steam to other Plant Processes Atlas™ and Jupiter® Magnetic Level Indicator with externally attached magnetostrictive transmitter Thermal Dispersion Aurora® Protects pumps from dead head, run out, overheating and cavitation Figure 4 Condensate Recovery Process Level • Protect valves pump seals from exposure to high temperature steam • Maintain minimum head pressure on condensate pump • Ensure sufficient headspace for flash steam creation • Allow capacity to accommodate condensate from various process groups • Manage boiler feedwater supply chain to meet demand GWR/MLI Technology Benefits • Redundant and diverse level technologies • Unaffected by process conditions • No calibration required • No moving parts – eliminates instrument induced errors (GWR) • Setup wizard and full diagnostics – fast startup and fault isolation • Designed for high temperature steam applications • Simplifies instrumentation hardware Case Study • Pump Seal - $1,000.00 • Labor - two person for ½ day @ $75.00/hr equals $600.00 • Discharged condensate $3.65/1000 gallons • Condensate receiver out-of-service for maintenance $$$ • 1 to 3 pump seal replacements per week reduced to 1 to 3 per year: “Pulp Paper Plant” • Maintenance cost of poor level control: $78K to $244K per year Eliminating Hidden Maintenance Costs
  • 7. 7 Makeup Water Treatment Makeup water treatment is a critical component of steam generation in that it is the means to resupply the system with water suitable for boiler and other operations that, for whatever reason, was lost in the cycle. Unlike the previous applications discussed in the steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety while providing proper inventory management to ensure chemical and makeup water supply meets demand. Here the focus is on the chemical component of the water treatment sinceitpresentsdifficultiesforleveltechnologiesthatmayworkperfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel’s vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on the day-to-day practicality and reliability of the type of instrument(s) used. Additionally, there are safety considerations when replenishing chemicals as well as long- term maintenance costs, which can be addressed simultaneously with inventory monitoring by implementing a few simple, cost-effective modifications to the instrumentation package. Chemical storage, demineralization and water header tanks come in a variety of shapes and sizes, usually, horizontal or vertical vessels six to ten feet in diameter/height, with the ammonia storage and demineralizer tanks being the largest. It is not uncommon to see some type of level transmitter (ultrasonic being the most prevalent) installed to provide level indication to the control room with a local display at the base of the tank, either in series with the 4–20 mA transmitter output or repeated from the control room. The signal to the control room tracks inventory, acts as a high alarm for overfill protection and establishes the resupply interval. The local display facilitates monitoring the offload of chemicals from the supplier’s truck. Accuracy, reliability and visibility in dynamic vessel environments and operational scenarios are a level technology’s best attributes when addressing chemical storage applications. Cost is always an upfront consideration on these seemingly less complicated measurements. Nonetheless, performance in these two areas can have a measurable impact on the “real” cost of ownership for a plant. There is also a good argument for selecting the appropriate level technology during the Front End Engineering Design (FEED) phase of a project, as this will eliminate potential installation and commissioning issues by taking into consideration the technology in the vessel design — another area of potential savings. Any number of level technologies can and have been used to address chemical storage. Adhering to the principles of minimizing the number of variables (e.g., vulnerability to process dynamics, calibration, hardware complexity, etc.) that can affect a technology’s ability to perform as intended is a key step in reducing the total cost of ownership. Again, Guided Wave (contact) Radar as well as its Through-Air (non-contact) Radar counterpart excel in these areas. Magnetic Level Indicators (MLI) operating in conjunction with either type of radar technology or coupled with a magnetostrictive level transmitter offer redundancy and technology diversity while enhancing visibility for improved safety during resupply operations. There is also the added benefit of redundancy when verifying the primary transmitter’s performance during periodic inspections on scheduled outages or while troubleshooting. This does not imply non-contact ultrasonic level transmitters or other technologies are not up to the task. Simply put, radar is indifferent to the changes in the contents of the vapor space of these vessels occurring throughout the course of the day. Oftentimes, these changes affect a technology causing what can be referred to as nuisance alarms, e.g., intermittent signal loss or when the level indication becomes erratic only 7 High-visibility magnetic level indicator with magnetostrictive transmitter supports the offloading of ammonia at a combined cycle power plant Key Components to Chemical Storage Monitoring • Inventory Management (accuracy) • Resistance to chemical attack (reliability maintenance) • Utilize a technology that is unaffected by changes in the vapor space of the vessel (reliability) • Performance verification (maintenance) • Visibility during product transfer (safety)
  • 8. 8 to recover about the time a technician arrives on the scene. These types of issues are difficult to isolate due to their intermittent nature and the fact they cannot be linked to an installation, configuration or hardware anomaly. When discussing the water treatment process supporting any steam cycle, large or small, it is not a one-size-fits-all concept that provides the most benefit as related to performance. For as simple as some of these level applications appear, there is no shortage of instances where they contribute disproportionately to the commissioning and maintenance budgets simply because they cannot accommodate the full breadth of the application dynamics. Opting for a technology-centric versus a one-size-fits-all approach to applications throughout the water treatment process reduces both short- and long-term cost of ownership. This allows for the implementation and realization of the cost benefit of entry-level technologies for less strenuous applications, while minimizing cost on those with variations in the vapor space (e.g., steam, chemical composition, excessive condensation, etc.). All of which can wreck havoc on an instrument’s performance as well as a plant’s maintenance budget. Energy Management The thrust of this discussion, regardless of the scale of an operation, centers on identifying key areas of the plant where leveraging the attributes of a technology in any given scenario has the most profound effect on efficiency with a quantifiable return on investment falling in the one- to two-year time frame. As noted earlier, purchased fuel and electricity consumption are areas where any improvements in efficiency drop directly to a company’s bottom line. It makes sense that having the ability to monitor the end- use location of fuel throughout a facility as well as the consumption specifics for individual applications — predominately the boiler — can offer insight to potential areas of improvement. A similar statement can be made for electricity consumption; whereby reductions can be realized by simply identifying where the energy is being lost. In the energy management arena the ability to better monitor combustion air, fuel gas flow and compressed air can help identify losses that over short periods of time can affect a plant’s profitability. The two key phrases when discussing instrumentation for the aforementioned are “cost effective” and “return on investment.” Without question, any situation can be resolved if enough financial resources are thrown in its direction. The idea is to realize the benefit in the shortest time frame possible at the most reasonable cost. Thermal dispersion mass flow meters meet these criteria. Chemical Storage Water Treatment Level Technologies • Radar – Guided Wave (GWR) and Non-Contact for simplified installation, commissioning and maintenance while tolerant to a changing vapor space • Magnetic Level Indicator (MLI) for improved visibility during resupply; periodic maintenance or performance verification. Can stand alone or work in conjunction with other level transmitters to provide redundancy and technology diversity to critical measurement • Magnetostrictive transmitter coupled with MLI offers an alternative to top-mounted level transmitter technologies while being isolated from vessel contents • Ultrasonic (non-contact) excellent level solution for non-chemical or less critical applications in the water treatment process with limited variations in the vapor space 8
  • 9. 9 Combustion air flow measurement to a boiler is important to maintain a stoichiometric ratio with the amount of fuel being supplied.  Too little air flow can result in incomplete combustion along with additional carbon monoxide or pollutants depending on the fuel being burned. On the other hand, too much air flow can cool the furnace and waste heat out of the stack. The repeatability of the air measurement is essential to obtaining the most efficient air-fuel ratio (AFR). Measuring fuel gas flow (natural gas or propane) usage to individual combustion sources compared to the output (steam/hot water) can help optimize boiler efficiency and better manage energy consumption. Knowingindividualboilerperformancemayalsoassistinoperatingthose offering the best efficiency. Lowering fuel consumption is one of the easiest methods to reduce cost and improve market competitiveness. A key role in energy and facilities management is making compressed air systems more reliable and efficient. Valuable resources are wasted when a leak goes unnoticed or cannot be easily isolated. The Department of Energy estimates that 20–30% of compressor output goes to leaks accounting for thousands of dollars in electrical consumption for wasted air. More extreme cases are the purchase cost of additional/larger compressors to fulfill compressed air needs. The first step to reducing utility costs is to measure the usage. Thermal dispersion technology can be used in branch lines for determining consumption in different sections of the plant or as a relative indication of leakage.  • Repeatability of ±0.5% of reading • Direct mass flow measurement • Easy to install in an air duct • No on-site or in-situ calibration • Strong signal at low flow rates with high turndown • Verify calibration in the field • Easy installation with low pressure drop • Direct mass flow measurement without the need for pressure or temperature compensation • Easy installation with use of an insertion probe with compression fitting • Accurate flow measurement under varying pressures • High turndown and good sensitivity at low flow rates Thermal Dispersion Mass Flow Meter Thermal mass flow meters are primarily used in air and gas flow measurement applications. The meters consist of a transmitter and probe with temperature sensors (RTDs) located in the pins at the bottom of the probe. The reference sensor measures the process temperature and the other sensor is heated to a specific temperature above the reference. As the flow rate increases, heat gets taken away from the heated sensor. More power is then applied to the heated sensor to maintain the temperature difference. The relationship between power and mass flow rate is established during factory calibration. 9
  • 10. 10 Case Study 1* Steam System Efficiency Optimized J.R. Simplot Fertilizer Plant Benefits: Total annual cost savings: $335,000 Energy savings: 75,000 MMBtu • Improved Boiler Operation • Recycled Steam • Increase Condensate Recovery • Steam Trap Repairs • Improved Insulation Project costs: $180,000.00/ROI 6.5 months Case Study 2* Improving Steam System Efficiency Goodyear Tire Plant Benefits: Total annual cost savings: $875,000 Energy savings: 93,000 MMBtu • Optimize Boiler Operation – tune boilers to reduce excess 02, reduce fuel consumption • Recover Process Waste Heat – installed heat exchanger to raise makeup water temperature using energy in condensate • Insulate Process Equipment – lower steam system energy consumption Total Implementation Project Costs: $180,000/ROI 2.5 months * U.S. Department of Energy 10 Summary: Process Optimization through Instrumentation Although plausible, it is rare to identify a single source of inefficiency related to poor level controls that impacts a company’s bottom line in the double digit percentile. More so than not, it is these small incremental opportunities for improvement across various aspects of the steam generation cycle, condensate recovery system and waste heat recovery process that ultimately equate to substantial savings. • Reduced water consumption, treatment, discharge and inventory management • Improved boiler/steam drum control – energy savings and steam quality • Reduced fuel consumption – waste heat recovery • Energy Management – fuel gas, combustion air and compressed air flow • Hardware protection maintenance – pumps and pump seals Oftentimes, the hidden maintenance costs and inefficiencies associated with a technology’s vulnerabilities (sustained operation in high pressure and temperature steam environments; exposure to chemical and other process conditions; and errors due to the complexity of the measurement itself and subsequent calibration requirements) are overshadowed by the day-to-day operation of these processes. Regardless of the scale of an operation – commercial power generation or small scale boiler system, leveraging the inherent attributes of an instrument’s fundamental technology in both the short-term (engineering, upfront cost, installation and commissioning) and long- term (maintenance, day-to-day practicality and energy management) present simple and cost-effective approaches to maximizing the return on investment in the system itself.
  • 11. 11 Magnetrol® Instrumentation See the full product line at: magnetrol.com 11 Guided Wave Radar Non-Contact Radar Ultrasonic Buoyancy Thermal Dispersion Magnetic Level Indication/ Magnetostrictive
  • 12. 12 705 Enterprise Street • Aurora, Illinois 60504-8149 • 630-969-4000 • Fax 630-969-9489 • www.magnetrol.com Copyright © 2016 Magnetrol International, Incorporated. All rights reserved. Performance specifications are effective with date of issue and are subject to change without notice. Magnetrol and Magnetrol logotype, Eclipse, Aurora, Jupiter and Orion Instruments are registered trademarks of Magnetrol International, Incorporated BULLETIN: 41-298.0 EFFECTIVE: March 2016