This document introduces Industrial Products Company, which supplies industrial equipment like air compressors, pipes, fittings, water tanks, valves, and industrial paints. It discusses reciprocating and screw air compressors, ABS pipes and fittings for air, water, and chemicals, water pipes and fittings, aerosol paints, Attricoat specialty coatings, and industrial brake linings. Contact information is provided at the end for the managing director.

1. Welcome
INDUSTRIAL PRODUCTS COMPANY
D-451 PRATAP VIHAR, SECTOR-11, GHAZIABAD U.P
“Energy creates
efficiency, Quality creates
future”

2. INTRODUCTION
Industrial Products Company is one of the oldest supplier and
exporter of a wild range of industrial products Air Compressor, ABS
Pipe and fitting, PPR Pipe & fitting, HDPP Pipe & Fittings, Water
tank, Flanges & Industrial Valves for air, water, chemical, gas, and
acid. Compressed air dryers and Pneumatic tools etc. We are a
leading trader of Industrial Paints for Anti-Corrosive
Coating, Attricoat Rust Converter, Attricoat Tar Epoxy, Attricoat
Epoxy, Attricoat Solvent Epoxy, Attricoat SF, Floor coating paint, Fire
coating paint, and more industrial paints etc.
Industrial Products Company One of the most recognized names in
the field of Industrial Equipment established its operations in
2011, with a vision of the upcoming Compressed Air Piping
Technology, by a group of fusion pipe and fitting, IR, Atlas
Copco, Elgi, Solitaire Topcoat Company having a rich experience in
the field of Compressed Air & Air Piping (PPR Pipe and fitting or
ABS Pipe and fitting), & Industrial Paints With relentless
commitment to quality, consistent dedication to customer satisfaction
and unparalleled standards of service, I.P.C. is recognized as a
benchmark for new age technology, superior quality, digital concepts
and personalized service that has ensured customer satisfaction

3. Air compressor
Reciprocating Air compressor

4. Types of Reciprocating
Compressors
SingleStage Single Cylinder
Compressor.
Single Stage Two Cylinder
Compressor.
Single Stage Three Cylinder
Compressor.
Two Stage Two Cylinder Compressor.
Two Stage Three Cylinder
Compressor.

5. Screw air compressor
5 HP To 500 HP Screw Air Compressor

6. Characteristics of
Screw Compressors
1. Aesthetic appearance and reasonable
structure
2. Large unit capacity with high volume
efficiency
3. Less vibration and low noise
4. High process precision
5. Low specific power and lower energy
consumption
6. Easy for maintenance
7. Low operating cost
8. It’s based on P.L.C

7. ABS Pipe & Fitting
Industrial Purpose for Air, Water, Gas & Chemicals….

8. Compressed Air Piping
Specially formulated ABS is blended with high
performance liner layer – Enhances its Physical &
Chemical properties.

9. Advantages
 Safety
 Wide range of applications
 Clean  Quick to joint
 Speed of
 Non Toxic Installation
 Leak free
 Smooth bore
system
 Easy to handle  Self colored
 Maintenance Free

10. Water Pipe line And
Fitting
For Hot & Cold Water

11. Advantages
High Impact material
50 Years Design Life
Applicable for both Hot, Cold & Chilled Water
Ductile down to -40 degree to +90
Chemical Resistant
UV Resistant
Non Toxic / Taint Free

12. Aerosal Paints
For Industrial Purpose

13. Aerosols Products
1.)All Purpose Cleaner
. 14.)Galvanize Coating (Silver)
2.)Electrical Cleaner. 15.)316 L Stainless Steel Coating
3.)Electronic Cleaner 16.)Insul Tech.
4.)Battery Cleaner 17.)All in One
5.)Varnish & Paints Remover 18.)Rust Penetrate
6.)Bearing Cleaner 19.)Anti- Seize Lubricant
7.)Carbon Cleaner 20.) Rust Inhibitor
8.)Red Varnish 21.)Wire Rope Lubricant
9.)Transparent Varnish 22.)Chain Lubricant
10.)Acrylic Coating 23.) Belt Protector
11.)Battery Terminal Coating 24.)Graphite Dry Lubricant
12.)Hi Temp Alu Coating 25.) Steel Stick Magic
13.)Zinc Galvanize

14. Attricoat Speciality &
Anti-Corrosive Coating
Industry

15. Attricoat & Anti-Corrosive
Coating Products
Attricoat Rust Converter
Attricoat Tar Epoxy
Attricoat Epoxy
Attricoat Solvent Epoxy
Attricoat SF.

16. Industrial Brake Lining
High Quality

17. Product
Brake lining is a flexible, Solid woven asbestos based
friction material reinforced with brass wire for better
strength and impregnated with resin. Due to its
flexible nature, it can be cut into segment, cones and
special shapes to enable the material in fitting to
various form. It may be heated uniformly at a
moderated temperature to soften the impregnates to
make the forming more easier. It should be used
strictly under dry condition.

18. Application
Brake lining is suitable for various break and
clutch components and is used in
cranes, lifts, winches, mining, winding
machines, haulages, road rollers, sugar mill
centrifuges concrete mixers, excavators etc.

19. Contact
Yogendra Kumar Singh (M.D)
Industrial Products Company
D-451 Pratap Vihar, Sec-11, Ghaziabad,
U.P – 201009 India.
Mobile No’s -+91-9810599480 & +91-9136364426
Tele – fax : 0120 – 2962184
Email ID:- info@ipcpipes.com & ipcgzb@gmail.com
www.ipcpipes.com

20. Thank you
.