Shot blasting cleaning process is one of the ancient processes used which uses different media for cleaning of a surface.

1. Shot Blasting Cleaning and Its Basics That You Should Know
Shot blasting cleaning process is one of the ancient processes
used which uses different media for cleaning of a surface. The
media used are blasted on the surface with a certain pressure
to get rid of the debris. This procedure is mostly used to
provide the required finish for any given surface. The media
which are projected onto the surface usually remove the rusts
or other materials from the surface. You can either smooth
the surface or you can even roughen it by employing shot
blasting.

3. Pressure Variation in Blast Cleaning
Blast cleaning consists of a blasting pot which comprises of a compressor.
The compressor is responsible for projecting the materials onto the surface with
very high pressure. But the pressure can be varied as per the projecting
materials and the surfaces. For example; if you are using a metal surface for
cleaning, then you can maintain a higher pressure, but if you do want to clean
the surfaces made up of glass, then you have to vary the pressure. If you use
the same pressure for glass as you use for metals, then you will end up in
breaking the material.
Apart from varying the pressure, you require to guide the nozzle of the blasting
pot. You have to have firm grip on the nozzle as the materials are projected with
very high pressure. Unless you guide the material onto the surface through the
nozzle, you will not achieve the required finish. The process of shot blasting is
quite risky and should be done under expert’s consideration.

4. CONTACT US
Telephone: 01785 224552
Mobile: 07884433851
Email: enquiries@steadblast.co.uk
Or you can reach us at our mailing address:
STEADBLAST
Beacon Lodge
Beacon Farm
Beaconside
Stafford
Staffordshire
ST18 0AE
http://www.steadblast.co.uk/