List of publication Barhm Mohamad 2023/6.

1. List of publication of Dr. Barhm Abdullah Mohamad
PhD in Mechanical Engineering
Specialist: Engine powertrain, Drivetrain and NVH
Affiliation: Department of Petroleum Technology, Koya Technical Institute, Erbil Polytechnic
University, 44001 Erbil, Iraq
1. Barhm-AB-Mohamad, Simulate model for analyzing the effect of engine design parameters
on the performance and emissions of spark ignition engines, International journal of
Mechanical Engineering and Technology, 4(5), pp. 266-278, 2013.
2. Barhm Abdullah Mohamad, Abdelsalam Abdelhussien, Remaining Life Assessment of
Refinery Furnace Tubes Using Finite Element Method, International Journal of Research in
Mechanical Engineering, 4(2), pp. 06-09, 2016.
3. Barhm Abdullah Mohamad, Failure analysis of gas turbine blade using finite element
analysis, International Journal of Mechanical Engineering and Technology, 7(3), pp. 299-
305, 2016.
4. Barhm Mohamad, Saad Jabber Nazal, Effects of transient load on gas turbine blade stress
and fatigue life characteristic, International J. of Multidispl. Research & Advcs. in Engg, 9(1),
pp. 73-80, 2017.
5. Barhm Mohamad, Gabor Szepesi, Betti Bollo, Combustion Optimization in Spark Ignition
Engines, MultiScience - XXXI. microCAD International Multidisciplinary Scientific
Conference, University of Miskolc, 2017.
6. Barhm Mohamad, Gabor Szepesi, Betti Bollo, Review Article: Modelling and Analysis of A
Gasoline Engine Exhaust Gas Systems, 5th International Scientific Conference on Advances
in Mechanical Engineering, University of Debrecen, pp. 345-357, 2017.
7. Barhm Mohamad, Gábor L. Szepesi, Betti Bollo, Review Article: Effect of Ethanol-Gasoline
Fuel Blends on the Exhaust Emissions and Characteristics of SI Engines, Vehicle and
Automotive Engineering 2, Springer International Publishing, pp. 29-41, 2018.
8. Salah Amroune, Barhm Mohamad, Mustafa Moussaoui, Hafida Saaidi, Geometric
regeneration and mechanical analysis of a gas turbine blade type Frame 9001 GE,
Engineering Solid Mechanics, 6(2), pp. 105-112, 2018. DOI: 10.5267/j.esm.2018.3.003.
9. Barhm Mohamad, A review of flow acoustic effects on a commercial automotive exhaust
system, Mobile Vehicle Mechanics, 45 (2), pp. 1-4, 2019. DOI:
10.24874/mvm.2019.45.02.01.
10. Barhm Mohamad, A review of flow acoustic effects on a commercial automotive
exhaust system-methods and materials, Journal of Mechanical and Energy Engineering,
3(43), 2, pp. 149-156, 2019. DOI: 10.30464/jmee.2019.3.2.149.

2. 11. Barhm Mohamad, Jalics Karoly, Milad Kermani, Exhaust System Muffler Volume
Optimization of Light Commercial passenger Car Using Transfer Matrix Method]
International Journal of Engineering and Management Sciences, University of Debrecen,
4(1), pp. 132-139, 2019. DOI: 10.21791/IJEMS.2019.1.16.
12. Barhm Mohamad, Salah Amroune, The analysis and effects of flow acoustic in a
commercial automotive exhaust system, Advances and Trends in Engineering Sciences and
Technologies III: Proceedings of the 3rd International Conference on Engineering Sciences
and Technologies (ESaT 2018), September 12-14, 2018, High Tatras Mountains, Tatranské
Matliare, Slovak Republic, Taylor & Francis Group-CRC Press, pp. 197-202, 2019. DOI:
10.1201/9780429021596-31.
13. Barhm Mohamad, Andrei Zelentsov, 1D and 3D Modeling of Modern Automotive
Exhaust Manifold, Journal of the Serbian Society for Computational Mechanics, 13(1), pp.
80-91, 2019. DOI: 10.24874/jsscm.2019.13.01.05.
14. Chouki Farsi, Salah Amroune, Mustafa Moussaoui, Barhm Mohamad, Houria
Benkherbache, High-Gradient magnetic separation method for weakly magnetic particles:
an Industrial Application, METALLOPHYSICS AND ADVANCED TECHNOLOGIES’ (i.e.
‘Metallofizika i Noveishie Tekhnologii’), 41(8), pp. 1103–1119, 2019. DOI:
10.15407/mfint.41.08.1103.
15. Salah Amroune, Ahmed Belaadi, Noureddine Menasri, Moussa Zaoui, Barhm Mohamad,
Houari Amin, New approach for computer-aided static balancing of turbines rotors,
Diagnostyka, 20(4), 2019. DOI: 10.29354/diag/114621.
16. Barhm Mohamad, Design and optimization of vehicle muffler using the Ffowcs Williams
and Hawkings model, Machine Design, 11(3), pp. 101-106, 2019. DOI:
10.24867/MD.11.2019.3.101-106.
17. Barhm Mohamad, Jálics Károly, Andrei Zelentsov, Hangtompító akusztikai tervezése hibrid
módszerrel, Multidiszciplináris Tudományok, 9(4), pp. 548-555, 2019. DOI:
10.35925/j.multi.2019.4.58.
18. Barhm Mohamad, Jalics Karoly, Andrei Zelentsov, Investigation and optimization of the
acoustic performance of formula student race car intake system using coupled modelling
techniques, Design of Machines and Structure, 9(1), pp.13-23, 2019. DOI:
10.32972.dms.2019.002
19. Barhm Mohamad, Mohammed Ali, Hayder Neamah, Andrei Zelentsov, Salah Amroune,
Fluid dynamic and acoustic optimization methodology of a formula-student race car
engine exhaust system using multilevel numerical CFD models, Diagnostyka, 21(3), pp.103-
111, 2020. DOI: 10.29354/diag/126562.

3. 20. Barhm Mohamad, Jalics Karoly, Andrei Zelentsov, CFD modelling of formula student car
intake system, Facta Universitatis, Series: Mechanical Engineering, 18(1), pp.153-163,
2020. DOI: 10.22190/FUME190509032M.
21. Б Мохамед, Я Кароли, АА Зеленцов, Трехмерное моделирование течения газа во
впускной системе автомобиля «Формулы Студент» Журнал Сибирского
федерального университета, 13(5), pp. 597-610, 2020. DOI: 10.17516/1999-494X-0249.
22. Houria Benkherbache, Salah Amroune, Moussa Zaoui, Barhm Mohamad, Mourad Silema,
Hassen Saidani, Characterization and mechanical behaviour of similar and dissimilar parts
joined by rotary friction welding, Engineering Solid Mechanic, 9(1), pp.23-30, 2020. DOI:
10.5267/j.esm.2020.6.002.
23. Barhm Mohamad, Jalics Karoly, Andrei Zelentsov, Salah Amroune, A hybrid method
technique for design and optimization of Formula race car exhaust muffler, International
Review of Applied Sciences and Engineering, AKADEMIAI KIADO, 11(2), pp. 174–180, 2020.
DOI: 10.1556/1848.2020.20048.
24. Salah Amroune, Ahmed Belaadi, Moussa Zaoui, Noureddine Menaseri, Barhm Mohamad,
Khalissa Saada, Riyad Benyettou, Manufacturing of rapid prototypes of mechanical parts
using reverse engineering and 3D Printing, Journal of the Serbian Society for
Computational Mechanics, 15(1), pp. 167-176, 2021. DOI:
10.24874/jsscm.2021.15.01.11.
25. Barhm Mohamad, Jalics Karoly, Andrei Zelentsov, Salah Amroune, Investigation of
perforated tube configuration effect on the performance of exhaust mufflers with mean
flow based on Three-Dimensional Analysis, Archives of Acoustics, 46(3), pp. 561-566, 2021.
DOI: 10.24425/aoa.2021.138148.
26. Barhm Mohamad, Jalics Karoly, Andrei Zelentsov, Salah Amroune, A Comparison Between
Hybrid Method Technique and Transfer Matrix Method for Design Optimization of Vehicle
Muffler, FME Transactions, 49(2), pp. 494-500, 2021. DOI: 10.5937/fme2102494M.
27. Amroune Salah, Ahmed Belaadi, Mostefa Bourchak, Barhm Mohamad, Impact des
traitements alcalin des fibres de palmier dattier sur les propriétés thermomécaniques,
Conférence MATERIAUX 2018 – 19-23 novembre 2018 – Strasbourg.
28. Amroune Salah, Ahmed Belaadi, Mostefa Bourchak, Barhm Mohamad, Houari Amin,
Nouvelle Approche pour L'équilibrage Statique des Rotors de Turbines, INTERNATIONAL
SEMINAR IN INDUSTRIAL ENGINEERING AND APPLIED MATHEMATICS-ISIEAM’2018, 1, 47.

4. 29. Abdelmalek Elhadi, Salah Amroune, Moussa Zaoui, Barhm Mohamad, Ali Bouchoucha,
Experimental investigations of surface wear by dry sliding and induced damage of medium
carbon steel, Diagnostyka, 22(2), pp. 3-10, 2021. https://doi.org/10.29354/diag/134116.
30. Mohammed Qasim Ali, Barhm Mohamad, A review of the design and control using
computational fluid dynamics of gasoline direct injection engines, DIAGNOSTYKA, 23(3),
pp.1-8, 2022. https://doi.org/10.29354/diag/153373.
31. Falah Zarda, Adnan Hussein, Suad Danook, Barhm Mohamad, Enhancement of thermal
efficiency of nanofluid flows in a flat solar collector using CFD, Diagnostyka, 23(4), pp. 1-9,
2022. https://doi.org/10.29354/diag/156384.
32. Amar Berkache, Salah Amroune, Ali Golbaf, Barhm Mohamad, Experimental and numerical
investigations of a turbulent boundary layer under variable temperature gradients, Journal
of the Serbian Society for Computational Mechanics, 16(1), pp.1-15, 2022.
10.24874/jsscm.2022.16.01.01.
33. Firas Qader, Adnan Hussein, Suad Danook, Barhm Mohamad, Omar Khaleel, Enhancement
of Double-Pipe Heat Exchanger Effectiveness by Using Porous Media and TiO2 Water, CFD
Letters, 15(4), pp.31-42, 2023. https://doi.org/10.37934/cfdl.15.4.3142.
34. Mohamad, B., & Zelentsov, A. (2023). METHODE HYBRIDE POUR LA CONCEPTION ET
L’OPTIMISATION D’UN ECHAPPEMENT SILENCIEUX DE VOITURES DE COURSE FORMULA .
Acoustique Canadienne, 50(4). Consulté à l’adresse https://jcaa.caa-
aca.ca/index.php/jcaa/article/view/3469.
35. Hussein Hayder Mohammed Ali, Adnan M Hussein, Kadum Mohammed Hussain Allami, et
al. Evaluation of shell and tube heat exchanger performance by using ZnO/water
nanofluids. Journal of Harbin Institute of Technology(New Series).
DOI:10.11916/j.issn.1005-9113.2023001.
36. Al-Abboodi, H., Fan, H., Al-Bahrani, M., Abdelhussien, A., Mohamad, B., 2023, Mechanical
characteristics of nano-crystalline material in metallic glass formers, Facta Universitatis-
Series Mechanical Engineering, doi: 10.22190/FUME230128016A.
37. Hau Than Diep, Gia Buu Nguyen, Barhm Mohamad, Remapping and simulation of EFI
system for SI engine using piggyback ECU, Acta Polytechnica 63(2), p.89–102, 2023.
https://doi.org/10.14311/AP.2023.63.0089.