Ppt Fits Tolerances[1]

Tolerance Dimensioning ,[object Object],[object Object],[object Object]

Tolerances The Tolerance is 0.001” for the Hole as well as for the Shaft

Allowance & Clearance Interchangeable Fit

Size Designations ,[object Object],[object Object],[object Object],[object Object]

Fits Between Mating Parts ,[object Object],[object Object],[object Object],Minimum air space is 0.002”. This is the allowance and is always positive in a clearance fit

Basic Hole System ,[object Object],[object Object],[object Object],[object Object],Minimum clearance: 0.500”-0.498” = 0.002” Maximum clearance: 0.502” – 0.495” = 0.007”

Basic Shaft System ,[object Object],[object Object],[object Object],[object Object],Minimum clearance: 0.502”-0.500” = 0.002” Maximum clearance: 0.505” – 0.499” = 0.006”

Specifications of Tolerances ,[object Object],The high limit is placed above the low limit. In single-line note form, the low limit precedes the high limit separated by a dash

Specifications of Tolerances ,[object Object],[object Object],[object Object]

Tolerances Related to Machining Processes

Terms related to Metric Limits & Fits

Some Definitions ,[object Object],[object Object],[object Object],[object Object]

Some Definitions ,[object Object],[object Object]

[object Object],They are a set of tolerances that varies according to the basic size and provides a uniform level of accuracy within the grade.

Definitions ,[object Object],[object Object]

[object Object],[object Object]

Ppt Fits Tolerances[1]

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (20)

Ähnlich wie Ppt Fits Tolerances[1]

Ähnlich wie Ppt Fits Tolerances[1] (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Ppt Fits Tolerances[1]