2. Page 2
KRYPTON CONTROL & SOLUTIONS
#152, OM BIKSHU BUILDING
GANGAMMA CIRCLE,JALAHALLI (EAST)
BANGALORE-560013
PHONE :+91-80 23452833/53,+91-9739468612,
+91-9663839040
E-MAIL : infokrypton@kcsi.in
www.kryptoncontrolsolutions.com
3. Page 3
ABOUT US:-
KRYPTON CONTROL AND SOLUTIONS is the one of the leading
manufacture of solar products like Solar Power House (SPH), Solar Street Light,
Solarmax (Lantern) and LED lighting solutions, Normal Inverter/UPS, Solar Charge
Controller, etc… We bring the innovative ideas and technology for consumer
product that adds value to customers through a combination of multiple high-end
technologies for complete solutions.
In 2010 we are launched with Green Innovation and revolutionary
technology, Now in India we are one of the leading inventor, Innovator and
implementer of leading-edge technology enabled solutions operating in the core
business segments of industry, energy and calibration.
Our Vision:-
We are a company primarily engaged in providing quality and comprehensive,
innovative solutions in energy conservation coupled with technology expertise and
applied to create total system solutions in commercial, industrial and home to our
customers;
Serving the welfare of the community at large through our strategies and actions are
in line with our commitment to sustainable development and energy saving built on
economic progress, social development and environmental improvement.
Our Mission:-
We will be ultimate solution provider with a reputation for expertise, quality, cost,
and providing sustainable business and services solution in the field of energy,
industry and lights.
4. Page 4
PURE SINE WAVE POWER HOUSE
(INVERTER/UPS)Features:
1. Pure Sine Wave Output.
2. DSP Technology.
3. No humming sound.
4. Smart charging.
5. Long battery life.
6. Compact Design.
7. DSP based very robust design which will not fail in any
extreme condition.
8. 20 KHz operating frequency while inverter and charging.
9. Cycle-Cycle current limiting which is an enhanced protection
method during short circuit and heavy load condition, Current
limiting action will take place instant tripping which will load to
more reliability.
10. Protections against: Overload, Short circuit, Battery low, in
all these condition will be shown in the LCD display.
11. LCD Display for indicating various status of the system like
Inverter ON ,Mains ON, Charging current, Over load, Battery
Low. Input voltage, Battery voltage, UPS/INV mode, Load in
percentage etc.
13. Delayed inverter cut off for condition like battery low, over
load, short circuit etc., and this system will automatically restart
from cut off after a few seconds of buzzer beeps. The system
will permanent cut off in the error condition Exists after 4
restart.
14. Isolated Mains sensing which will ensure no electric shock
from the battery /PCB even if the Phase Neutral is reversed.
15. Inbuilt SMPS type charging.
16. Ideal for mixed load application Available
Capacity:500VA, 700VA, 850VA,1KVA @12V
5. Page 5
DSP PURE SINE WAVE POWER HOUSE
(INVERTER)
Features:
1. Pure Sine Wave Output.
2. DSP Technology.
3. No humming sound.
4. Smart charging.
5. Long battery life.
6. Compact Design.
7. DSP based very robust design which will not fail in any
extreme condition.
8. 20 KHz operating frequency while inverter and charging.
9. Cycle-Cycle current limiting which is an enhanced
protection method during short circuit and heavy load
condition, Current limiting action will take place instant
tripping which will load to more reliability.
10. Protections against: Overload, Short circuit, Battery low,
in all these condition will be shown in the LCD display.
11. LCD Display for indicating various status of the system
like Inverter ON ,Mains ON, Charging current, Over load,
Battery Low. Input voltage, Battery voltage, UPS/INV mode,
Load in percentage etc.
13. Delayed inverter cut off for condition like battery low, over
load, short circuit etc., and this system will automatically
restart from cut off after a few seconds of buzzer beeps. The
system will permanent cut off in the error condition Exists
after 4 restart.
14. Isolated Mains sensing which will ensure no electric
shock from the battery /PCB even if the Phase Neutral is
reversed.
15. Inbuilt SMPS type charging.
16. Ideal for mixed load application Available Capacity:
1.5KVA, 2KVA, 3KVA, 4KVA, 5KVA @ 24V, 36V & 48V
6. Page 6
SOLAR POWER HOUSE
HYBRID MODEL
OVERVIEW:-
Krypton Solar Power House is an
electronic power source which stores
the energy in batteries connected to it.
The Solar Power House is with inner
charger and automatic switch. When
the power off (Grid power off) it can
switch automatically and take use off
battery power to run loads connected,
when power on (Grid Power On) it also
can switch automatically and take use
of main power (Grid power). But first
charging priority always from solar
panel even the false sunrise .If solar
power not enough to charging the
battery then it will charge with main
power (Grid power).
7. Page 7
SOLAR POWER HOUSE HYBRID MODEL:-
Features:
1. Pure Sine Wave Out put
2. DSP Technology
3. LCD Display
4. Compact Design
Control switches:
1. Inverter/ UPS switch
a. Inverter-Low voltage-100V High Voltage-270V AC
b. UPS-Low voltage-170V High Voltage -270V AC
2. Charger Selection Switch
Mains charger OFF –Mains charger will be permanently OFF
and Battery will charge only from solar
Mains/solar-In this mode both charger will work UP TO 13.8V,
mains charger will turned OFF @ 13.8V automatically and only
solar will work UPTO 14.3V
3. Auto/Manual Switch
Auto-This solar Hybrid inverter can provide power to the
connected load by utilizing the PV power, Utility (Mains) power
and battery power. When PV energy is good it will charge the
connected batteries, when battery voltage reaches @14.3V
Relay will turn ON and this inverter will convert power to the
connected loads from solar and Batteries. When PV and
Battery power is not sufficient for connected loads (It means
less than 11.5V) this inverter will source from the utility (mains)
at the same time. When PV energy is not sufficient and Utility
(mains) is failed, The System selects the Battery as source.
Manual-This inverter will work when mains failed.
Indication & Readings
1. Solar-It will glow when solar is connected.
2. Charger ON-It will glow when charging starts.
3. Relay ON-It will glow when relay is ON.
Available Capacity:-500VA, 700VA, 850VA, 1KVA @12V
&24V.
8. Page 8
DSP SOLAR POWER HOUSE HYBRID MODEL:-
Features:
1. Pure Sine Wave Out put
2. DSP Technology
3. LCD Display
4. Compact Design
Control switches:
1. Inverter/ UPS switch
a. Inverter-Low voltage-100V High Voltage-270V AC
b. UPS-Low voltage-170V High Voltage -270V AC
2. Charger Selection Switch
Mains charger OFF –Mains charger will be permanently OFF
and Battery will charge only from solar
Mains/solar-In this mode both charger will work UP TO 27.6V,
mains charger will turned OFF @ 27.6V automatically and only
solar will work UPTO 28.6V.
3. Auto/Manual Switch:
Auto-This solar Hybrid inverter can provide power to the
connected load by utilizing the PV power, Utility (Mains) power
and battery power. When PV energy is good it will charge the
connected batteries, when battery voltage reaches @28.6V
Relay will turn ON and this inverter will convert power to the
connected loads from solar and Batteries. When PV and
Battery power is not sufficient for connected loads (It means
less than 23V) this inverter will source from the utility (mains) at
the same time . When PV energy is not sufficient and Utility
(mains) is failed, The System selects the Battery as source.
Manual-This inverter will work when mains failed.
Indication & Readings:
1. Solar-It will glow when solar is connected
2. Charger ON-It will glow when charging starts.
3. Relay ON-It will glow when relay is ON.
Available Capacity: 1.5KVA, 2KVA, 3KVA, 4KVA, 5KVA @
24V, 36V & 48V
9. Page 9
SOLAR POWER
HOUSE WITH MPPT
OVERVIEW:-
KRYPTON Solar Power House unit with MPPT
(SPH) is an integrated system consisting of a
solar charge controller, inverter and a Grid
charger. It provides the facility to charger the
battery bank either through Solar or Grid.
The SPH continuously monitors the state of
Battery Voltage, Solar Power output and the
loads. Due to sustained usage of power, when
the Battery voltage falls below a preset level,
the SPH will automatically transfer the load to
the Grid power and also charge.
Once the Batteries are charged to the pre-set
level, the SPH cuts off the Grid Power from the
system and will restore to feeding the loads
from the battery bank & also restore to charging
the battery from the Available Solar power. The
SPH always gives preference to the Solar
Power and will use Grid power only when the
Solar Power/ Battery is insufficient to meet the
load requirement.
10. Page 10
SOLAR POWER HOUSE WITH MPPT UNIT:-
• KRYPTON Solar Power House with
MPPT (SPH) is an integrated system
consisting of a solar charge controller,
inverter and a Grid charger. It provides
the facility to charger the battery bank
either through Solar or Grid. The PCU
continuously monitors the state of Battery
Voltage, Solar Power output and the
loads. Due to sustained usage of power,
when the Battery voltage falls below a
preset level, the PCU will automatically
transfer the load to the Grid power and
also charge. Once the Batteries are
charged to the pre-set level, the PCU
cuts off the Grid Power from the system
and will restore to feeding the loads from
the battery bank & also restore to
charging the battery from the Available
Solar power. The PCU always gives
preference to the Solar Power and will
use Grid power only when the Solar
Power/ Battery is insufficient to meet the
load requirement.
11. Page 11
Features:
1. Pure Sine Wave Out put
2. DSP Technology
3. LCD Display
4. Compact Design
Control switches:-
Inverter/ UPS switches
a) Inverter-Low voltage-100V High Voltage-270V AC.
b) UPS-Low voltage-170V High Voltage -270V AC.
2. Charger Selection Switch
Mains charger OFF –Mains charger will be permanently OFF and Battery will charge only from
solar
Mains/solar-In this mode both charger will work UP TO 27.6V, mains charger will turned OFF @
27.6Vautomatically and only solar will work UPTO 28.6V.3.
3.Auto/Manual Switch
Auto-This solar Hybrid inverter can provide power to the connected load by utilizing the PV power, Utility
(Mains) power and battery power. When PV energy is good it will charge the connected batteries, when
battery voltage reaches @28.6V Relay will turn ON and this inverter will convert power to the connected
loads from solar and Batteries. When PV and Battery power is not sufficient for connected loads (It
means less than 23V) this inverter will source from the utility (mains) at the same time. When PVenergy is
not sufficient and Utility (mains) is failed, The System selects the Battery as source.
Manual-This inverter will work when mains failed.
Indication & Readings
1. Solar-It will glow when solar is connected.
2. Charger ON-It will glow when charging starts.
3. Relay ON-It will glow when relay is ON.
Available Capacity:-1.5KVA, 2KVA, 3KVA, 4KVA, 5KVA up to 10 KVA @ 24V, 36V, 48V & 240 V
12. Page 12
KRYPTON STREET LIGHT:-
Led street lighting is considered the
best option for outdoor lighting.
Compared to ordinary lights, these
street lights have a number of
advantages. With the advance in
technological features, lighting systems
have undergone a tremendous change.
Today majority of the cities have street
lights which contain led bulbs. These
lights have the advantage of being
environment friendly in addition to many
other benefits.
An LED street light is an integrated light
that uses light emitting diodes (LED) as
its light source. These are considered
integrated lights because, in most
cases, the luminaire and the fixture are
not separate parts (except LED Gine-
based luminaires). New in
manufacturing, the LED light cluster is
sealed on a panel and then assembled
to the LED panel with a heat sink to
become an integrated lighting fixture.
13. Page 13
Reasons to Install LED Street Light:-
Today most of the metropolitan cities have LED Street light to brighten the roads and lanes. One of the major reasons for
installing these lights includes its cost effectiveness. It is relatively cheaper compared to the ordinary lights. Street lights
need to be lit for a longer period of time and the use of these lights are probably the best option to meet rising electricity
bills.
There are many advantages of installing these street lights and some of the most important among them include the
following:
1) Environment friendly: the LED Street light is environment friendly as it does not emit any sort of poisonous gas while
being lit. The bulbs do not contain mercury or harmful chemicals. As it does not contain any harmful chemicals it can be
easily disposed causing no harm to the environment or soil.
2) LED Street light switches on immediately: unlike the fluorescent lamps which take time to heat up once they are
switched on, these lights switch on immediately and light up the entire area within seconds.
3) Efficient and more durable: these lights are more long lasting compared to the ordinary lights.
4) Directional light: The lights emitted from the street light containing LED bulbs are much more directional and uniform.
The lights also contain huge amount of brightness unlike the ordinary lights.
5) Better night vision: installation of the LED Street light has paved way for better and improved vision at night.
6) Emits bright light: these street lights are known to emit bright lights compared to the ordinary bulbs. It has the capacity
to emit bright light and thereby lights up a wide area of roads and parking lots.
7) Requires less maintenance: due to its increased life span, it seldom requires any sort of maintenance or repairs.
14. Page 14
KRYPTON SOLAR MAX (LANTERN):-
Salient Features:-
•4-8 hours of light per day.
•Hybrid charging option.
•No recurring cost.
•High Bright Seoul LED’s, life- 50,000 hrs.
•30-50% more efficient than CFL.
•Sturdy design, suitable for both urban & rural
households.
•Constant Brightness.
•Light in all directions.
Specifications:-
•Solar Panel :- 2 W/ 6 V
•Battery :- Luminous Solar sealed 4.5 AH / 6 V
•Charging Indication:- Green
•Battery low indication:- Red
•Usage Duration: - Up to 8 hrs. On full charge.
•Weight of Solarmax :- 2 Kg
•Body: - Plastic.