1. First-Aid Pipe Sealing Kit
The quick, easy and professional immediate help in the event of pipe damage or for the preparation of later conventional pipe
repairs.
Without tools, soldering or welding!
Suitable for all pipe materials and can be used for, in addition to water pipes, also for oil pipes.
 From zero to tight in 30 minutes
 Suitable for all pipe materials
 No additional tools required
 No soldering or welding
 Everything tight in no time at all
Temperature range : -60°C to +270°C
Contents of kit : case filled with 2-component sealing compound,
sealing bandage 25 x 1800 mm, sealing bandage 50 x 3600 mm, protective gloves, stirring rod, brush and repair instructions
Application: Thoroughly clean the repair area. -> Mix the two components putty thoroughly.
-> Apply to the repair area, a base layer. -> Take the curing putty on the spatula. -> Press down putty with spatula and hold for a few
minutes -> Mix A further amount of filler and apply a 3-5 mm thick layer -> remove excess material with a file if required -> Finally, wrap
the leak with sealing tape. Sealing bandages also available separately for small leakages where putty is not required. The bandage is
first activated in water (30 sec.), if activated once it has to be used, it hardens within of about 30 min.
Pricing:
Kit Price - Rs.4999.00 + taxes - inside the kit box is set B a big bandage 50 x 3600 mm, Set A a small bandage 25 x 1800 mm, Set C
component 1 resin and 2 metal powder; the small bandage is used for 1 repair of a hose up to 1 inch, the big bandage is used for 1
repair above 1 inch, the Set C is recommended for holes of more than about 3-4 mm to fill first and then on top of it the repair bandage;
the Set C resin/powder can be used for several repairs but should not be used alone as pressure resistance alone is limited
For pricing of set A, B and C separately, send us a request after the purchase of the first kit.
Contact Fermit distributors in India, Project Sales Corp at sales@projectsalescorp.com www.fermit.com