Amil baba, Kala ilam expert in Multan and Black magic specialist in Sindh and...
Tumbler assembly
1.
2. You may be getting the parts you need from storage bins or by unpacking a new protobot
kit. Familiarize yourself with the parts – name, codes, sizes before beginning to build
3. Use a team tray to keep parts organized. This will save you lots of time in all future build
and break downs.
4.
5.
6. New motors do not require clutches but use shaft
couplers instead. Don’t forget to use stainless steel
screws (not the black ones) to mount motors.
7.
8.
9.
10.
11.
12. This is a repeat of the previous steps to build a mirror image of the right side you just completed.
13.
14. The nut starter tool is especially useful during this
part of the assembly
15.
16.
17.
18.
19. Now add the battery, cortex and connect the
motors. Remember, motor controllers are also
required.