1. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
SPC Y
customer definable context data (LDS) N
control chart setup by any context key combination (SPC channel filter criteria), e.g. by recipe, tool or
Y
product, operation, part
support compressed (mean, S, min, max, n) and raw values data Y
sub-charts (CKCs) and summary charts (channel) Y
automatic creation of CKCs Y
display violations in CKCs in channel chart Y
go from channel to CKC chart and vice versa Y
chart types Y
offline charts Y
online charts Y
variables charts Y
mean charts Y
range charts Y
sigma charts (standard deviation) Y
raw value charts Y
Moving median chart Y
MA charts (moving average) Y
MS charts (moving sigma) Y
EWMA(M) charts for mean values (Exponential Weighted Moving Average) Y
EWMA(S) charts for sigma values Y
EWMA(R) charts for range values Y
attributive charts Y
c charts for nonconformities Y
np charts for number nonconforming Y
p charts for fraction nonconforming Y
u charts for average number of nonconformities Y
attributive detail counts new Y
defect/failure type new Y
location new Y
cause new Y
stackbar display of detail counts new Y
pareto of details counts by type/location/cause and any combination of them new Y
multiparameter charts (MPCs), define and display groups of related charts together N
normalized charts: normalization to specification limits, target or control limits Y
moving chart calculation start reset from online and offline chart Y
graphical moving chart reset indicators and cursor info comments new Y
additional annotations capability to display information from other systems in control chart new Y
control limit and process index calculations Y
with SPACE calculation Y
with customer plugin Y
with qs-STAT (optional) N
violation rules Y
complete check against all violation rules Y
Raw above specification (1) Y
Raw below specification (2) Y
Mean above control limit (3) Y
Mean below control limit (4) Y
www.camline.com Last Update: 7-Sep-2007 Page 1 of 19
2. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
Sigma above control limit (5) Y
Range above control limit (6) Y
Trend Up (Regression) (7) Y
Trend Down (Regression) (8) Y
Run Up (9) Y
Run Down (10) Y
EWMA(Mean) above control limit (11) Y
EWMA(Mean) below control limit (12) Y
MA above control limit (13) Y
MA below control limit (14) Y
MS above control limit (15) Y
MS below control limit (16) Y
Sigma below control limit (17) Y
Range below control limit (18) Y
Sigma Run Up (19) Y
Range Run Up (20) Y
N of M in Zone A Upper (21) Y
N of M in Zone A Lower (22) Y
N of M in Zone A or B Upper (23) Y
N of M in Zone A or B Lower (24) Y
N inside Zone C (25) Y
N outside Zone C (26) Y
N in a rising row (27) Y
N in a falling row (28) Y
EWMA(Sigma) above control limit (30) Y
EWMA(Sigma) below control limit (31) Y
EWMA(Range) above control limit (32) Y
EWMA(Range) below control limit (33) Y
N[%] Raw above specification (34) Y
N[%] Raw below specification (35) Y
N[%] Raw above control limit (36) Y
N[%] Raw below control limit (37) Y
Raw above control limit (38) Y
Raw below control limit (39) Y
Mean above specification (40) Y
Mean below specification (41) Y
N MA in a rising row (42) Y
N MA in a falling row (43) Y
MS Run Up (44) Y
N Mean alternating (50) Y
N Sigma alternating (51) Y
N Range alternating (52) Y
Repeated violation 1 (60): configurable Y
Repeated violation 2 (61): configurable Y
Repeated violation 3 (62): configurable Y
Repeated violation 4 (63): configurable Y
acceptance of data without specification limits Y
violation handling Y
www.camline.com Last Update: 7-Sep-2007 Page 2 of 19
3. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
popup chart with Y
www.camline.com Last Update: 7-Sep-2007 Page 3 of 19
4. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
TSGs (trouble shooting guides) Y
CAs (corrective actions) Y
alarms Y
violation comment request Y
email notification Y
email containing information based on template N
mailing list administration N
email comprises comprehensive automatically generated SPC information Y
clicking a link in the email opens the related offline chart Y
for each valuator violation: receivers of email and/or chart can be defined Y
actions triggered by violations can be set up specific to chart and type of violation Y
search for samples with certain violations N
automated actions can be triggered (see Integration) N
changeable chart filter condition Y
without loosing old data Y
mark data that does not fit new filter Y
allow to set up charts after data has been sent without loosing data Y
Charting & Analysis Y
sub-charts (CKCs) and summary charts (channel) Y
automatic creation of CKCs Y
display violations in CKCs in channel chart Y
go from channel to CKC chart and vice versa Y
display CKC limits in channel chart new Y
charts of freely definable queries N
matching charts for quick, graphical comparison analysis N
store frequently used factor combinations as matching definitions N
default matching definition for one-button switch to comparative matching view N
toggle on/off specific matching (factor) combinations N
store excluded matching combinations permanently on chart level N
sort data in chart by matching combinations for improved comparative viewing new N
overlay mode for display of Mean/EWMA(M), Range/EWMA(R) or Sigma/EWMA(S) values Y
display of online charts always, never, only with violations, or on demand Y
raw values Y
box & whisker plot Y
in-a-row display Y
stacked display Y
attributes on raw value level Y
x-axis Y
by sample number Y
by sample data Y
configurable x-tic labels, common x-tic label or per chart Y
histogram: continuous or by classes, with or without normal distribution line Y
configurable structured display of information about selected sample (cursor info) Y
tool tips in chart display selected information items directly on sample under cursor new Y
grid Y
configurable chart type names Y
zoom Y
www.camline.com Last Update: 7-Sep-2007 Page 4 of 19
5. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
history data selection Y
www.camline.com Last Update: 7-Sep-2007 Page 5 of 19
6. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
flagging of samples Y
sample flag for out-of-order (not collected chronologically) Y
sample flag for WE rule violation Y
manual flagging of outliers Y
graphical decoration flags for SPC rule violations Y
violation-type specific graphical/text decorations new Y
different violation decorators for same/other statistc chart type Y
different violation decorators for channel/CK violations Y
configurable shape and color, text and thickness for each decoration type Y
raw value drill-down on any sample Y
chart scaling Y
by fixed values Y
logarithmic scaling Y
by sample values Y
by specification limits Y
by control limits Y
sample history displays information of all samples with selected key values Y
show chart for sample selected in sample history Y
specification limit display Y
control limit display: old and calculated control limit lines Y
visual chart setup can be stored and re-used directly Y
data export to offline data analysis tools Y
qs-STAT export format Y
plain text (SAS) export format Y
CSV (MS Excel) Y
Calculations Y
outlier detection and removal N
control limit calculation wizard to quickly review and recalculate many chart limits Y
calculation with a quick selection of calculation strategies (formulas) Y
plug-in architecture for customer-specific calculation methods and process indexes Y
non-normal distribution models N
folded normal distribution (qs-STAT only) N
Johnson transformation new N
log-normal distribution new N
mixed distribution (qs-STAT only) N
Weibull distribution new N
Rayleigh distribution (qs-STAT only) N
Pearson distribution system (qs-STAT only) N
Gamma distribution new N
extended normal distribution new N
box-cox transformation (qs-STAT only) N
root transformed normal distribution (qs-STAT only) N
process capability calculation methods new N
ISO 21747 M1_1,4 (standard textbook 6-sigma method) new N
ISO 21747 M1_1,6 (quantile method using mean value for location) new N
ISO 21747 M1_2,6 (quantile method using median for location) new N
ISO 21747 M1_3,6 (quantile method 50% quantile for location) new N
www.camline.com Last Update: 7-Sep-2007 Page 6 of 19
7. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
ISO 21747 M1_4 (fraction nonconforming) new N
Kane's modified Cpk with off-target deprecation new N
Pp, Ppk (using within-sample variation only) new N
process index calculation
one process index for each valuation type Y
1000 average (arithm. mean) x-bar Y
1021 mean of std. deviations Y
1023 mean of ranges Y
1100 median x-tilde Y
1200 minimum value min(x) Y
1300 maximum value max(x) Y
2100 standard deviation S Y
2110 std. dev. of x-bar Y
2300 range R Y
3000 skewness g1 Y
3200 kurtosis b2 Y
3400 excess g2 Y
3511 number reference units Y
3512 mean size of ref. unit Y
3513 min size of ref. unit Y
3514 max size of ref. unit Y
3515 total no.of defects Y
3520 defective percentage Y
3521 p minimum Y
3522 p maximum Y
4201 percentile(1%) N
4202 percentile(2%) N
... N
4299 percentile(99%) N
4613 Epps-Pulley test for normal distribution new N
4700 comparison of variances F[ch] Y
4711 % variance within samples Y
4721 % variance between samples Y
5001 number of values < LSL Y
5005 expected ratio p(tot)[%] Y
5010 Lower Critical capability index Y
5101 number of values > USL Y
5110 Upper Critical capability index Y
5210 capability index Cp Y
5220 critical capability index Cpk Y
5301 Capability calculation method new N
5506 % of values < LSL Y
5516 % of values > USL Y
5520 number of values in spec Y
5526 % of values in spec Y
5530 number of values out of spec Y
5536 % of values out of spec Y
6000 model distribution ND(<>) Y
www.camline.com Last Update: 7-Sep-2007 Page 7 of 19
8. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
6100 transformation Y
www.camline.com Last Update: 7-Sep-2007 Page 8 of 19
9. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
6301 total values n(tot) Y
6302 values evaluated n(eff) Y
6303 first evaluated sample Y
6350 number of outlier raw values new N
6351 number of lower outlier raw values new N
6352 number of upper outlier raw values new N
6400 sample size n(smp) Y
6401 total number of samples k(tot) Y
6402 samples evaluated k(eff) Y
6404 last evaluated sample Y
6409 eliminated outliers k(el) N
7244 lower spec. limit Y
7245 upper spec. limit Y
8011 target value Y
8910 unstability N
13520 p confidence region Y
15210 Cp confidence region Y
15213 Cp conf. upper Y
15214 Cp conf. lower Y
15220 Cpk confidence region Y
15223 Cpk conf. lower Y
15224 Cpk conf. upper Y
50004 first sample date Y
50005 last sample date Y
50102 % Violations Y
50103 % Out of specification Y
50104 % Out of control limits Y
50105 % Sensitizing rule violations Y
50109 #Flagged samples new N
50110 no. of violations of valuator 1 Y
... Y
50172 no. of violations of valuator 63 Y
50106 % Not-commented Y
50180 Customer Field 00 Y
50181 Customer Field 01 Y
... Y
50199 Customer Field 19 Y
50808 Epps-Pulley normality test for log-normal data new N
50824 Epps-Pulley normality test for mean values new N
Control Limits Y
offline chart calculation Y
fixed limits and limits depending on number of points for moving charts Y
engineering limits (are not overwritten by re-calculation) Y
limit offsets for EWMA(Mean) and MA Y
automated calculation after n samples (prerun) N
control limit checks Y
upper confidence limit Cp < demand Y
Cp < demand Y
www.camline.com Last Update: 7-Sep-2007 Page 9 of 19
10. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
lower confidence limit Cp < demand Y
www.camline.com Last Update: 7-Sep-2007 Page 10 of 19
11. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
upper confidence limit Cpk < demand Y
Cp < demand Y
lower confidence limit Cpk < demand Y
mean value control limits out-of-specification Y
location or variation chart not stable N
prerun values with violations Y
> 10 % prerun values with violations Y
CKC limits tighter than channel limits Y
new control limits tighter than current limits Y
Calculated Parameters Y
built-in formulas and transformations Y
Trigger - Reference [TransformedSpec] Y
Reference - Trigger [TransformedSpec] Y
Trigger + Reference [TransformedSpec] Y
Trigger * Reference [TransformedSpec] Y
Sum of N [TransformedSpec] Y
Trigger / Reference [TransformedSpec] Y
1 / Trigger [TransformedSpec] Y
(Max - Min) / (Max + Min) Y
(X - mu) / sigma [TriggerSpec] [TransformedSpec] Y
c * log(aX + b) [TransformedSpec] Y
log(IQR-filter(x)) [TransformedSpec] [f=<IQR_factor>] Y
2 * (X - T) / (USL - LSL) Y
Unit Transformation Y
customer-specific calculated parameters with ACO module (Advanced Calculation Option) N
Dashboards new N
near-realtime refresh new N
web based new N
high-level overview new N
customer-definable aggregation/drilldown trees new N
web based configuration wizard new N
active notificaiton upon data collection interval time-out new N
distinction between critical and monitoring charts new N
plugin support for custom classification rules new N
personalized selection of dashboards ("My dashboards") new N
chart-specific dashboard settings new N
age-out interval to differentiate high frequency from low-frequency charts new N
data collection interval N
dashboard window size for violation counts new N
dashboard window size for short-term Cpk new N
collection interval time-out notification receiver new N
chart overviews new N
multi-level aggregation/drilldow (by area, tool type, product, etc.) new N
by process capability class new N
by process stability class new N
by data collection frequency new N
by invalid measurement flag rate new N
chart classification count paretos analysis (by area, tool type, product, process, etc.) new N
www.camline.com Last Update: 7-Sep-2007 Page 11 of 19
12. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
violation overviews new N
www.camline.com Last Update: 7-Sep-2007 Page 12 of 19
13. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
multi-level aggregation/drilldow (by area, tool type, product, etc.) new N
specification limit violations new N
control limit violation new N
other rule violations new N
not commented violations new N
violation count pareto analysis (by tool, recipe, product etc) new N
pareto drill down new N
chart detail list new N
boxplot comparison new N
filter/sort new N
hyperlink to offline chart new N
color-coded cells highlight problem metrics new
Cpk (short-term) new N
Cpk target new N
#violations by type new N
%violations target new N
# flagged invalid data points in dashboard window new N
number samples/raw values in dashboard window new N
oldest/newest sample date in dashboard window new N
mean/stdev/min/max/spec/quartiles new N
violation detail list new N
direct violation annotation in web page new N
direct flag action in web page new N
multi-selection support for annotation/flag actions new N
hyperlink to specific sample in offline chart new N
Reporting N
report scheduler N
daily, weekly, monthly, or quarterly calculated reports N
free reports at a definable time N
user-definable report cycles (e.g. Bi-weekly, every 8 hours ...) N
automatic re-calculation N
priorities N
rolling report with original and extended time period N
freely definable queries N
definable number of samples N
definable time interval N
configurable process index list to calculate and display N
result visualization N
comparison report N
trend report N
category trend (percentage development) report N
trend / comparison combined report N
comparison in navigator tree with link to offline chart N
report export N
in PDF format N
in HTML (Web) format N
in RTF (Rich Text Format) N
in CSV (MS Excel) format N
www.camline.com Last Update: 7-Sep-2007 Page 13 of 19
14. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
search for specific report results N
www.camline.com Last Update: 7-Sep-2007 Page 14 of 19
15. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
Web reporting – Browser access to reports N
Customer-specific reporting hooks for publishing to data warehouse etc. N
Administration Y
nested folders of arbitrary depth new N
specification limit administration through spec channels Y
start of SPACE applications via Java Web Start screen Y
inheritable attributes Y
manual update of many charts with search and "copy & paste" of attributes Y
bookmarks N
data browser Y
quick filter Y
sort by any column Y
wildcards Y
version control – audit trail N
view previous revisions N
compare revisions N
revert to previous revisions N
track who changed N
track when changed N
track what was changed (automatic change type detection) N
track why it was changed (comment) N
undelete support new N
important objects are only marked as deleted, but remain in database new N
accidentally deleted objects can be restored without data loss new N
deleted objects display can be toggled on/off in administration GUI new N
special permissions exist for viewing, restoring and permanently deleting marked objects new N
customer fields N
searches N
charts can be deleted directly from the search results N
search for calculated parameters with certain properties N
search for charts for certain parameters N
search for charts of certain divisions N
search for charts of certain names N
search for charts of certain owners N
search for charts sent to certain computers N
search for charts with certain control limits enabled or disabled N
search for charts with certain evaluations N
search for charts with certain key value combinations N
search for charts with changes at/before/after a certain time N
search for charts with no samples N
search for charts with notifications to certain email addresses N
search for charts with or without certain properties N
search for charts with report results with certain process index values in a certain time interval N
search for charts with samples newer than a certain date N
search for charts with samples older than a certain date N
search for charts with(out) certain comments N
search for charts with(out) certain corrective actions N
search for charts with(out) certain flags N
www.camline.com Last Update: 7-Sep-2007 Page 15 of 19
16. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
search for multiparameter charts with certain properties N
www.camline.com Last Update: 7-Sep-2007 Page 16 of 19
17. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
search for queries with certain properties N
search for samples collected in a certain period of time N
search for samples for certain parameters N
search for samples of certain divisions N
search for samples of certain owners N
search for samples with certain key value combinations N
search for samples with certain violations N
search for samples with changes at/before/after a certain time N
search for samples with(out) certain comments N
search for samples with(out) certain corrective actions N
search for samples with(out) certain flags N
search for spec channels with certain properties N
search for report results N
search for reports for certain parameters N
Security Y
user administration Y
various permissions on each object Y
each object belongs to an owner and a division Y
in each division, the user has defined permissions on each object Y
account options new Y
user must change password on next logon new Y
enable/disable account new Y
expire after n days new Y
remind password change new Y
force password change new Y
password quality enforcement new Y
minimum length configurable new Y
must contain digits (yes/no) new Y
must contain upper and lower case characters new Y
must contain special characters new Y
must not appear in dictionary (user-provided list) new Y
must be different than last <n> passwords new Y
fraud detection and protection new Y
automatically disable account after n consecutive logon failures new Y
auomatic system administrator notification when account was disabled due to login failure new Y
electronic signatures new Y
Archiving new N
archiving modes new N
archiving by serial tracking numbers new N
archiving by time interval (week) and key (process tool) new N
XML schema archive file format new N
zip compression option for archive files new N
archived data contains settings valid at the time the data was sent to SPACE new N
which SPC rules were enabled new N
who was notified new N
which specification and control limits were valid new N
support for batch processes (data associated with list of serial numbers) new N
support for updates on already archived data new N
www.camline.com Last Update: 7-Sep-2007 Page 17 of 19
18. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
indexing of archive files by one or multiple keys new N
archive flag new N
avoids multiple archiving of same data new N
avoids cleanup of not yet archived data new N
Integration Y
SPACE Listener N
SPISE Y
C, C++, Java, Visual Basic ... Y
CSV import Y
Navigator automation Y
goto chart Y
searches N
export Y
SPACE API to automate N
chart setup N
specifications management new N
calculated characteristics setup new N
folders setup N
bookmarks setup N
multi-parameter charts setup N
corrective actions setup N
trouble shooting guides setup N
alarms setup N
control limit management N
control limit calculation new N
process index calculation new N
supported MES interfaces Y
SiView Y
FACTORYworks Y
300works Y
WorkStream Y
PROMIS Y
additional annotations plugin capability to displays foreign system events in control charts new N
Usability Y
keyboard shortcuts Y
multibyte character support Y
all colors, fonts, and drawing styles configurable Y
multi-language GUI Y
english Y
chinese Y
japanese (optional) Y
german Y
Performance Y
redundant servers Y
dynamic load balancing Y
5 samples/second/server Y
50 samples/second/server with bulk data loading (multiple points into same chart) Y
www.camline.com Last Update: 7-Sep-2007 Page 18 of 19
19. New
LineWorks SPACE 6.0 Features SPACE 6 Basic
cluster failover support Y
customer installations up to 200.000 charts Y
customer installations up to 200 million raw values Y
customer installations up to 20 million samples Y
support for separate history database with longer data retention period Y
System Requirements Y
client supports MS Windows 2000 operating system Y
client supports MS Windows XP operating system Y
server supports HP-UX 11i operating system Y
server supports HP-UX 11.11 operating system Y
server supports HP-UX 11.23 operating system Y
server supports IBM AIX 4.3.3 operating system Y
server supports MS Windows 2000 operating system Y
server supports MS Windows 2003 operating system Y
server supports MS Windows XP operating system Y
server supports Sun Solaris 9 operating system Y
server supports Sun Solaris 10 operating system new Y
server supports SuSE Linux Enterprise Server 9 operating system Y
server supports SuSE Linux Enterprise Server 10 operating system new Y
support of COM middleware (via CAPS OLE Gateway) Y
support of CORBA/IIOP middleware Y
support of Oracle 9i database Y
support of Oracle 10g database new Y
support of TIB/Rendezvous TIBCO Load Balancing middleware Y
www.camline.com Last Update: 7-Sep-2007 Page 19 of 19