1. DEE2213 / DAE21503 Computer Aided Design
Project (20%)
This is a group project consists of 3 assigned group members.
1. Design a battery operated LED/Alarm switching circuit uses a relay. The
switching mechanism is triggered by either:
a. Light
b. Touch
c. Magnetic
d. Water
The switching circuit must have at least ten (10) components excluding connector.
2. Create a single sided printed circuit board. Fabrication of PCB can be with the
aid of Eagle Cadsoft and AutoCAD software only.
a. Some parts must be custom made according to parts used.
b. All external connections (battery, buzzer or lamp) must be made thru
connector (screw type connector).
c. All parts must be fully seated on its footprint (footprint must conform
to its physical part).
d. Get (buy) the actual part before designing the PCB to ensure all part is
assigned to its proper footprint.
e. The fabricated PCB must use copper pouring (copper plane) for ground
routing; various track width (to indicate route function) and labelling.
f. Design with the most minimal space (must less than 3 X 3 inches)
and attractive components layout.
3. The fabricated printed circuit board must be tested using oscilloscope or
multimeter to ensure the operational of the circuit. Collective data (printed data)
form oscilloscope must be compared with the simulation result.
4. The circuit can be simulated using PSpice, MultiSim or Proteus.
5. All simulations data and equivalent circuits must be printed out; analysis and
discussion must be handwritten, printed analysis or discussion is not acceptable.
6. Report can be written in proper English or Malay. Report writing must be in full
sentences, short form expression is considered as improper writing.
7. Use the cover page given.

2. There are two (2) reports to be submitted.
1. Seminar paper; submitted during presentation on 22 & 24 March 2011. The
contents of seminar paper must have:
a. The proposal of assigned project that include
i. introduction,
ii. circuit operation and
iii. resistive representation of trigger mechanism.
b. Simulation result/data that emulate the circuit function. Non supported
component must be replaced to emulate the actual component and
explained.
c. Discussion that compare simulation result with actual circuit behaviour
from (a).
Each group member must participate during presentation.
2. Final report: submitted before 15 April 2011. The content of final report must
consists of:
a. PCB design:
i. printed schematic drawing,
ii. printed PCB layout (print board outline, copper bottom and
component layout in a different page),
iii. the actual PCB film and
iv. the finished PCB with soldered components.
b. Analysis:
i. result/data from finished product using oscilloscope or
multimeter,
ii. compared the actual result with simulated result from 1(b).
c. Conclusion:
i. pcb design (based on given project topics; what have been
learnt thru project)
d. (b) and (c) must be handwritten.

3. CENTRE OF DIPLOMA STUDIES
COMPUTER AIDED DESIGN
SEMINAR
SUBJECT'S CODE DEE 2213 / DAE21503
PROJECT'S TITLE
COURSE'S CODE 2DEE / 2DET / 2DAE
STUDENT'S NAME 1.
MATRIC NO.
STUDENT'S NAME 2.
MATRIC NO.
STUDENT'S NAME 3.
MATRIC NO.
SUBMISSION DATE 22 / 24 MARCH 2011
COMMUNICATION / 3%
PRESENTATION / 4%
CONTENTS / 8%
SIMULATION / 5%
DISCUSSION / 5%
TOTAL MARKS RECEIVED STAMP

4. CENTRE OF DIPLOMA STUDIES
COMPUTER AIDED DESIGN
PROJECT REPORT
SUBJECT'S CODE DEE 2213 / DAE21503
PROJECT'S TITLE
COURSE'S CODE 2DEE / 2DET / 2DAE
STUDENT'S NAME 1.
MATRIC NO.
STUDENT'S NAME 2.
MATRIC NO.
STUDENT'S NAME 3.
MATRIC NO.
SUBMISSION DATE 15 APRIL 2011
ORIGINALITY / 5%
CREATIVITY / 5%
PCB DESIGN OVERALL DESIGN / 25%
FUNCTIONALITY / 10%
WORKMANSHIP / 5%
FORMAT / 5%
REPORT ANALYSIS / 10%
CONCLUSION / 10%
TOTAL MARKS RECEIVED STAMP

5. Universiti Tun Hussein Onn Malaysia
Pusat Pengajian Diploma
SEMESTER 2 SESI 2010/2011
PENSYARAH:
MATAPELAJARAN: REKABENTUK BERBANTU KOMPUTER
Projek Presentation
Bil Nama No. Matrik
LED Alarm Date
1 ABDUL HAKKIM BIN AHMAD RAZALI AE090118
2 ABDUL MOIDZ BIN MAHAMOD AE090256 Light 22/03
3 FATIN NUR FASYA BINTI RAHIAM AE090399
4 AMIR YASSER BIN ADZAMAN AE090384
5 AMIRUL HAKIM BIN MOHAMMAD NOR AE090271 Touch 24/03
6 NABILAH BINTI RAMLI AE090245
7 AMIRUL MUIM BIN AHMAD AE090001
8 AZLAN BIN ZULKUFLI AE090231 Magnetic 24/03
9 NOOR AINA AMIRA BINTI NOOR ZARUJHAN AE090410
10 AZMAN BIN AHAMAD AE090140
11 FAHMI AKMAL BIN DZULKIFLI AE090266 Water 22/03
12 NOOR SABIHAH BINTI RAMLEE AE090390
13 FIRDAUS BIN MOHAMAD AE090008
14 KHAIRON NIZWAN BIN MD RONI AE090389 Light 22/03
15 NOOR SHAZEAA BINTI MUKHTAR AE090141
16 MOHAMAD AMIR BIN JALAL AE090260
17 MOHAMAD HAMKA BIN HAIRONI AE090017 Magnetic 24/03
18 NUR ALYAA BINTI MOHD HASNI AE090247
19 MOHAMAD ROSDI BIN KAMARUZAMAN AE090238
20 MOHAMMAD SUFI BIN RAMLI AE090392 Water 22/03
21 NUR AQILAH BINTI ABD GHANI GANEHSALINGAM AE090119
22 MOHD ALIF BIN MOHD TAH AE090007
23 MOHD ASHRAF BIN MOHD RASHID AE080333 Light 22/03
24 NURAIMISYAHIRA BINTI ABDUL RAHIM AE090236
25 MOHD HASRUL BIN MD YAZAID AE090381
26 MOHD HAZIQ BIN SAADON AE090253 Touch 24/03
27 NURHIDAYAH SAYIDATUL A'KMA BINTI KAYATIN AE090268
28 MOHD NAJMUDDIN BIN RUNDDIN AE090241
29 MOHD NOR 'AZAMUDDIN BIN MOHD SOLEHUDDIN AE090029 Magnetic 24/03
30 NURUL 'ABIDAH NAJIHAH BINTI JAINI AE090010
31 MOHD SAIFUL ANUAR BIN SUHAIMI AE090254
32 MOHD SHAHRULNIZAM BIN TARMIZI AE090270 Water 22/03
33 NURUL ANIS BINTI ISMAIL AE090097
34 MOHD SHUKRI BIN IBRAHIM AE090248
35 MUHAMAD AMIN BIN ZAINI AE090096 Light 22/03
36 SITI AISHAH BINTI ABD HALIM AE090009
37 MUHAMAD FAUZI BIN YAACOB AE090139
38 MUHAMMAD AZFAR BIN NOORDIN AE090098 Magnetic 24/03
39 SITI NORBAITI BINTI ABDUL RANI AE090006
40 MUHAMMAD DANIAL BIN KOSNIN AE090242
41 MUHAMMAD NAZIRUL BIN MOHD AZMI AE090134 Water 22/03
42 BONIE ANAK JOHN CA100109
43 MUHAMMAD RIDUAN BIN ABD GHANI AE090239
44 MUHAMMAD RUZAINI BIN SHAHAD AE090016 Light 22/03
45 FAIZA BINTI MUHARAM CA100067
46 MUHAMMAD SHAFIE BIN SHAHARUDIN AE090232
47 MUHAMMAD SYUKRI BIN FADIL AE090265 Touch 24/03
48 NOR AISYAH BT AB RAZAK CA100132
49 MUHAMMAD ZAKI BIN ABDUL SALIM AE090386
50 NORHAKIM BIN MOHD SALLEH AE090258 Magnetic 24/03
51 NUR IZZATI BINTI SUHAIMI CA100088
52 RAJA MUHAMMAD MUZAFFAR BIN RAJA MAHADI AE090237
53 SIDEK BIN ABDULLAH AE090038 Water 22/03
54 NURATIQAH BINTI AHMAD CA100029
55 SYAZWAN BIN RAZALI AE090003
56 ISAM HASBI BIN MOHAMAD CA100030 Light 22/03
57 ZAHIRAH BINTI ZAINAL CA100086
58 MOHD FAZRI BIN RAMLI CA100115
59 MOHD KHAIRUL AZREE BIN UYUP CA100098 Magnetic 24/03
60 MUZAMMIL BIN MUDZAKIR CA100099