1. Communications Systems | LBC 3090/01 Ceiling Loudspeaker
LBC 3090/01 Ceiling Loudspeaker
www.boschsecurity.com
u Suitable for speech and music reproduction
u Increased sensitivity
u Flush-mounting in ceiling cavity
u Easy to install
u Protective dust cover
The LBC 3090/01 is an economic flush-mounting higher customer satisfaction, longer operating life, and
ceiling loudspeaker for general purpose applications. It much less chance of failure or performance
is a full range loudspeaker for speech and music deterioration.
reproduction in shops, department stores, schools, All plastic parts are manufactured from self-
offices, sports halls, hotels and restaurants. extinguishing high-impact ABS material (according to
UL 94V0).
Functions
Safety acc. to EN 60065
The LBC 3090/01 has a single-piece, 6 W dual cone
loudspeaker. A 100 V matching transformer is Region Certification
mounted behind the front panel assembly. The
moulded plastic front panel is mounted onto the Europe CE
loudspeakerâs metal frame, and a dust cover protects
the rear. The appearance and colour are unobtrusive in Installation/Configuration Notes
any interior.
Installation
Certifications and Approvals Installation is both quick and easy, as the unit(s) have
two built-in spring-loaded locking clamps that secure
All Bosch loudspeakers are designed to withstand them into holes in the ceiling (for suspended ceilings
operating at their rated power for 100 hours in and wall boards from 9 to 25 mm thick). Alternatively,
accordance with IEC 268-5 Power Handling Capacity they can be fixed with four screws (using pre-drilled
(PHC) standards. Bosch has also developed the holes) in ceiling or wall panels less than 9 mm thick. A
Simulated Acoustical Feedback Exposure (SAFE) test circular template for marking a 182 mm (7.1 in)
to demonstrate that they can withstand two times diameter hole is included with the loudspeaker.
their rated power for short durations. This ensures
extra reliability under extreme conditions, leading to
2. 2 | LBC 3090/01 Ceiling Loudspeaker
Terminal Block
The unit has a two-way terminal block with push
connections suitable for loop-through wiring. Three
primary taps are provided on the matching transformer
to allow selection of nominal full- power, half-power or
quarter-power radiation (i.e. in 3 dB steps).
LBC 3091/01 Surface Mounting Box
For mounting onto the surface of a wall or ceiling, the
color-matched surface mounting box LBC 3091/01 is
available.
Frequency response
LBC 3080/01 Fire Dome
During a fire, the ceiling cavity can allow fire or smoke
to spread throughout a building. To inhibit fire
entering the cavity via the ceiling loudspeaker, it can
be fitted with an LBC 3080/01 steel fire dome. This is
mounted on the loudspeaker assembly using four self-
tapping screws supplied with the fire dome. The fire-
dome has knock-out holes for two grommets
(supplied) and two cable glands (PG 13).
Polar diagram (measured with pink noise)
125 250 500 1 2 4 8
Dimensions in mm (in) Hz Hz Hz kHz kHz kHz kHz
SPL 1.1 94 91 89 91 93 95 89
SPL max. 102 99 97 99 10 10 97
1 3
Q-factor 4.8 5 3 3.4 6.3 18 20
Efficienc 0.66 0.32 0.34 0.4 0.4 0.2 0.0
y 6 2 5
H. angle 150 140 180 16 14 55 45
0 0
Dimensions in mm (in)
V. angle 150 140 180 16 14 55 45
0 0
Acoustical performance specified per octave
Circuit diagram
3. 3 | LBC 3090/01 Ceiling Loudspeaker
LBC 3091/01 Surface Mounting Box
LBC 3090/01 + LBC 3080/01 fire dome assembly
dimensions in mm (in)
Parts Included
LBC 3090/01 and LBC 3091/01 assembly Quantity Component
1 LBC 3090/01 Ceiling Loudspeaker
1 182 mm circular template
Technical Specifications
Electrical*
Maximum power 9W
Rated power 6 / 3 / 1.5 W
Sound pressure level 99 dB / 91 dB (SPL)
at 6 W / 1 W (1 kHz, 1 m)
Sound pressure level 103 dB / 95 dB (SPL)
at 6 W / 1 W (4 kHz, 1 m)
Effective frequency range (-10 70 Hz to 18 kHz
dB)
Dimensions in mm (in)
Opening angle 160° / 55°
LBC 3080/01 Fire Dome at 1 kHz/4 kHz (-6 dB)
Rated voltage 100 V
Rated impedance 1667 ohm
Connector 2-pole push-in terminal block
* Technical performance data acc. to IEC 60268-5
Mechanical
Diameter 210 mm (8.3 in)
Maximum depth 88 mm (3.5 in)
Mounting cut-out 182 + 5 mm (7.2 in)
Speaker diameter 152.4 mm (6 in)
Weight 1.1 kg (2.4 lb)
Color White (RAL 9010)
Magnet weight 150 g (5.3 oz)