Suche senden
Hochladen
Earthquake response of modified folded cantilever shear structurewith fix
•
2 gefällt mir
•
1,060 views
IAEME Publication
Folgen
Technologie
Melden
Teilen
Melden
Teilen
1 von 14
Jetzt herunterladen
Downloaden Sie, um offline zu lesen
Empfohlen
20320140502002 2-3
20320140502002 2-3
IAEME Publication
Effect of Friction Dampers on RC Structures Subjected to Earthquake
Effect of Friction Dampers on RC Structures Subjected to Earthquake
ijtsrd
IRJET- Seismic Analysis of Multi-Storey Building with and without Floating Co...
IRJET- Seismic Analysis of Multi-Storey Building with and without Floating Co...
IRJET Journal
PERFORMANCE OF STRIP FOOTINGS ON SLOPE REINFORCED WITH INCLINED PILE
PERFORMANCE OF STRIP FOOTINGS ON SLOPE REINFORCED WITH INCLINED PILE
IAEME Publication
Seismic Analysis of G 10 Storey Building with Various Locations of Shear Wall...
Seismic Analysis of G 10 Storey Building with Various Locations of Shear Wall...
ijtsrd
Seismic characteristics of the folded cantilever shear structure 2-3-4
Seismic characteristics of the folded cantilever shear structure 2-3-4
IAEME Publication
Effect of steel bracing on vertically irregular r.c.c building frames under s...
Effect of steel bracing on vertically irregular r.c.c building frames under s...
eSAT Journals
Review paper on seismic responses of multistored rcc building with mass irreg...
Review paper on seismic responses of multistored rcc building with mass irreg...
eSAT Journals
Empfohlen
20320140502002 2-3
20320140502002 2-3
IAEME Publication
Effect of Friction Dampers on RC Structures Subjected to Earthquake
Effect of Friction Dampers on RC Structures Subjected to Earthquake
ijtsrd
IRJET- Seismic Analysis of Multi-Storey Building with and without Floating Co...
IRJET- Seismic Analysis of Multi-Storey Building with and without Floating Co...
IRJET Journal
PERFORMANCE OF STRIP FOOTINGS ON SLOPE REINFORCED WITH INCLINED PILE
PERFORMANCE OF STRIP FOOTINGS ON SLOPE REINFORCED WITH INCLINED PILE
IAEME Publication
Seismic Analysis of G 10 Storey Building with Various Locations of Shear Wall...
Seismic Analysis of G 10 Storey Building with Various Locations of Shear Wall...
ijtsrd
Seismic characteristics of the folded cantilever shear structure 2-3-4
Seismic characteristics of the folded cantilever shear structure 2-3-4
IAEME Publication
Effect of steel bracing on vertically irregular r.c.c building frames under s...
Effect of steel bracing on vertically irregular r.c.c building frames under s...
eSAT Journals
Review paper on seismic responses of multistored rcc building with mass irreg...
Review paper on seismic responses of multistored rcc building with mass irreg...
eSAT Journals
Performance of shear wall building during seismic excitations
Performance of shear wall building during seismic excitations
IAEME Publication
Comparison of performance of lateral load resisting systems in multi storey f...
Comparison of performance of lateral load resisting systems in multi storey f...
eSAT Journals
Seismic analysis of high damping rubber bearings for base isolation
Seismic analysis of high damping rubber bearings for base isolation
eSAT Journals
IRJET- Seismic Effect of Rigid Floor Diaphragm
IRJET- Seismic Effect of Rigid Floor Diaphragm
IRJET Journal
Effect of Stiffening System on Building Resistance to Earthquake Forces
Effect of Stiffening System on Building Resistance to Earthquake Forces
IOSRJMCE
Elfejji Final Paper
Elfejji Final Paper
Jalila Elfejji
EFFECT OF SHEAR WALL AREA ON SEISMIC BEHAVIOR OF MULTI STORIED BUILDINGS WITH...
EFFECT OF SHEAR WALL AREA ON SEISMIC BEHAVIOR OF MULTI STORIED BUILDINGS WITH...
Ijripublishers Ijri
Lateral Load Analysis of Shear Wall and Concrete Braced Multi-Storeyed R.C Fr...
Lateral Load Analysis of Shear Wall and Concrete Braced Multi-Storeyed R.C Fr...
ijsrd.com
IRJET- Review on Seismic Analyses of RC Frame Structure by using Bracing ...
IRJET- Review on Seismic Analyses of RC Frame Structure by using Bracing ...
IRJET Journal
C046031318
C046031318
IJERA Editor
Study of variations in dynamic stability of tall structure corresponding to s...
Study of variations in dynamic stability of tall structure corresponding to s...
ijceronline
A comparative study of the effect of infill walls on seismic performance of rei
A comparative study of the effect of infill walls on seismic performance of rei
IAEME Publication
Effect of soft storeys in earthquake resistant analysis of rc framed structures
Effect of soft storeys in earthquake resistant analysis of rc framed structures
eSAT Journals
Analysis of multistoried braced steel space frame subjected to gravity and se...
Analysis of multistoried braced steel space frame subjected to gravity and se...
IJERA Editor
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
IJERD Editor
Applications of dampers for vibration control of
Applications of dampers for vibration control of
eSAT Publishing House
Study on laminated rubber bearing base isolators for seismic protection of st...
Study on laminated rubber bearing base isolators for seismic protection of st...
eSAT Journals
Evaluation of Effect of Lateral Forces on Multi-Storeyed Rcc Frame by Conside...
Evaluation of Effect of Lateral Forces on Multi-Storeyed Rcc Frame by Conside...
IJERA Editor
IRJET-Soil-Structure Effect of Multideck R.C.C. Structures
IRJET-Soil-Structure Effect of Multideck R.C.C. Structures
IRJET Journal
C12-AuthersCopy.pdf on earthquake resistance building
C12-AuthersCopy.pdf on earthquake resistance building
AblodeyAgbeko
Seismic performance of friction pendulum bearing by considering storey drift ...
Seismic performance of friction pendulum bearing by considering storey drift ...
eSAT Publishing House
Parametric study of base isolated building
Parametric study of base isolated building
prj_publication
Weitere ähnliche Inhalte
Was ist angesagt?
Performance of shear wall building during seismic excitations
Performance of shear wall building during seismic excitations
IAEME Publication
Comparison of performance of lateral load resisting systems in multi storey f...
Comparison of performance of lateral load resisting systems in multi storey f...
eSAT Journals
Seismic analysis of high damping rubber bearings for base isolation
Seismic analysis of high damping rubber bearings for base isolation
eSAT Journals
IRJET- Seismic Effect of Rigid Floor Diaphragm
IRJET- Seismic Effect of Rigid Floor Diaphragm
IRJET Journal
Effect of Stiffening System on Building Resistance to Earthquake Forces
Effect of Stiffening System on Building Resistance to Earthquake Forces
IOSRJMCE
Elfejji Final Paper
Elfejji Final Paper
Jalila Elfejji
EFFECT OF SHEAR WALL AREA ON SEISMIC BEHAVIOR OF MULTI STORIED BUILDINGS WITH...
EFFECT OF SHEAR WALL AREA ON SEISMIC BEHAVIOR OF MULTI STORIED BUILDINGS WITH...
Ijripublishers Ijri
Lateral Load Analysis of Shear Wall and Concrete Braced Multi-Storeyed R.C Fr...
Lateral Load Analysis of Shear Wall and Concrete Braced Multi-Storeyed R.C Fr...
ijsrd.com
IRJET- Review on Seismic Analyses of RC Frame Structure by using Bracing ...
IRJET- Review on Seismic Analyses of RC Frame Structure by using Bracing ...
IRJET Journal
C046031318
C046031318
IJERA Editor
Study of variations in dynamic stability of tall structure corresponding to s...
Study of variations in dynamic stability of tall structure corresponding to s...
ijceronline
A comparative study of the effect of infill walls on seismic performance of rei
A comparative study of the effect of infill walls on seismic performance of rei
IAEME Publication
Effect of soft storeys in earthquake resistant analysis of rc framed structures
Effect of soft storeys in earthquake resistant analysis of rc framed structures
eSAT Journals
Analysis of multistoried braced steel space frame subjected to gravity and se...
Analysis of multistoried braced steel space frame subjected to gravity and se...
IJERA Editor
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
IJERD Editor
Applications of dampers for vibration control of
Applications of dampers for vibration control of
eSAT Publishing House
Study on laminated rubber bearing base isolators for seismic protection of st...
Study on laminated rubber bearing base isolators for seismic protection of st...
eSAT Journals
Evaluation of Effect of Lateral Forces on Multi-Storeyed Rcc Frame by Conside...
Evaluation of Effect of Lateral Forces on Multi-Storeyed Rcc Frame by Conside...
IJERA Editor
IRJET-Soil-Structure Effect of Multideck R.C.C. Structures
IRJET-Soil-Structure Effect of Multideck R.C.C. Structures
IRJET Journal
Was ist angesagt?
(19)
Performance of shear wall building during seismic excitations
Performance of shear wall building during seismic excitations
Comparison of performance of lateral load resisting systems in multi storey f...
Comparison of performance of lateral load resisting systems in multi storey f...
Seismic analysis of high damping rubber bearings for base isolation
Seismic analysis of high damping rubber bearings for base isolation
IRJET- Seismic Effect of Rigid Floor Diaphragm
IRJET- Seismic Effect of Rigid Floor Diaphragm
Effect of Stiffening System on Building Resistance to Earthquake Forces
Effect of Stiffening System on Building Resistance to Earthquake Forces
Elfejji Final Paper
Elfejji Final Paper
EFFECT OF SHEAR WALL AREA ON SEISMIC BEHAVIOR OF MULTI STORIED BUILDINGS WITH...
EFFECT OF SHEAR WALL AREA ON SEISMIC BEHAVIOR OF MULTI STORIED BUILDINGS WITH...
Lateral Load Analysis of Shear Wall and Concrete Braced Multi-Storeyed R.C Fr...
Lateral Load Analysis of Shear Wall and Concrete Braced Multi-Storeyed R.C Fr...
IRJET- Review on Seismic Analyses of RC Frame Structure by using Bracing ...
IRJET- Review on Seismic Analyses of RC Frame Structure by using Bracing ...
C046031318
C046031318
Study of variations in dynamic stability of tall structure corresponding to s...
Study of variations in dynamic stability of tall structure corresponding to s...
A comparative study of the effect of infill walls on seismic performance of rei
A comparative study of the effect of infill walls on seismic performance of rei
Effect of soft storeys in earthquake resistant analysis of rc framed structures
Effect of soft storeys in earthquake resistant analysis of rc framed structures
Analysis of multistoried braced steel space frame subjected to gravity and se...
Analysis of multistoried braced steel space frame subjected to gravity and se...
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
Applications of dampers for vibration control of
Applications of dampers for vibration control of
Study on laminated rubber bearing base isolators for seismic protection of st...
Study on laminated rubber bearing base isolators for seismic protection of st...
Evaluation of Effect of Lateral Forces on Multi-Storeyed Rcc Frame by Conside...
Evaluation of Effect of Lateral Forces on Multi-Storeyed Rcc Frame by Conside...
IRJET-Soil-Structure Effect of Multideck R.C.C. Structures
IRJET-Soil-Structure Effect of Multideck R.C.C. Structures
Ähnlich wie Earthquake response of modified folded cantilever shear structurewith fix
C12-AuthersCopy.pdf on earthquake resistance building
C12-AuthersCopy.pdf on earthquake resistance building
AblodeyAgbeko
Seismic performance of friction pendulum bearing by considering storey drift ...
Seismic performance of friction pendulum bearing by considering storey drift ...
eSAT Publishing House
Parametric study of base isolated building
Parametric study of base isolated building
prj_publication
IRJET- A Study on Seismic Performance of Reinforced Concrete Frame with L...
IRJET- A Study on Seismic Performance of Reinforced Concrete Frame with L...
IRJET Journal
Literature work study of precast concrete connections in seismic
Literature work study of precast concrete connections in seismic
IAEME Publication
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
IAEME Publication
Background Study of Base Isolated Structure and Analysis of Base Isolated Frame
Background Study of Base Isolated Structure and Analysis of Base Isolated Frame
Association of Scientists, Developers and Faculties
Study of Eccentrically Braced Outrigger Frame under Seismic Exitation
Study of Eccentrically Braced Outrigger Frame under Seismic Exitation
IJTET Journal
Ijciet 10 01_198-2-3
Ijciet 10 01_198-2-3
IAEME Publication
IRJET- Post Peak Response of Reinforced Concrete Frames with and without in F...
IRJET- Post Peak Response of Reinforced Concrete Frames with and without in F...
IRJET Journal
Strengthening of R.C Framed Structure Using Energy Dissipating Devices
Strengthening of R.C Framed Structure Using Energy Dissipating Devices
paperpublications3
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
IAEME Publication
IRJET- Investigation of the Effect of Geometric Parameters on Behavior of Spe...
IRJET- Investigation of the Effect of Geometric Parameters on Behavior of Spe...
IRJET Journal
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover Analysis
IOSR Journals
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover Analysis
IOSR Journals
K012116773
K012116773
IOSR Journals
Review on Base Isolated Structures
Review on Base Isolated Structures
IRJET Journal
Effect of modeling of infill walls on performance of multi story rc building
Effect of modeling of infill walls on performance of multi story rc building
IAEME Publication
PANDEESWARI
PANDEESWARI
Viswa bharathy
Highly Deformable Energy-Dissipating Reinforced Concrete Elements in Seismic ...
Highly Deformable Energy-Dissipating Reinforced Concrete Elements in Seismic ...
IJERA Editor
Ähnlich wie Earthquake response of modified folded cantilever shear structurewith fix
(20)
C12-AuthersCopy.pdf on earthquake resistance building
C12-AuthersCopy.pdf on earthquake resistance building
Seismic performance of friction pendulum bearing by considering storey drift ...
Seismic performance of friction pendulum bearing by considering storey drift ...
Parametric study of base isolated building
Parametric study of base isolated building
IRJET- A Study on Seismic Performance of Reinforced Concrete Frame with L...
IRJET- A Study on Seismic Performance of Reinforced Concrete Frame with L...
Literature work study of precast concrete connections in seismic
Literature work study of precast concrete connections in seismic
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
Background Study of Base Isolated Structure and Analysis of Base Isolated Frame
Background Study of Base Isolated Structure and Analysis of Base Isolated Frame
Study of Eccentrically Braced Outrigger Frame under Seismic Exitation
Study of Eccentrically Braced Outrigger Frame under Seismic Exitation
Ijciet 10 01_198-2-3
Ijciet 10 01_198-2-3
IRJET- Post Peak Response of Reinforced Concrete Frames with and without in F...
IRJET- Post Peak Response of Reinforced Concrete Frames with and without in F...
Strengthening of R.C Framed Structure Using Energy Dissipating Devices
Strengthening of R.C Framed Structure Using Energy Dissipating Devices
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
IRJET- Investigation of the Effect of Geometric Parameters on Behavior of Spe...
IRJET- Investigation of the Effect of Geometric Parameters on Behavior of Spe...
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover Analysis
K012116773
K012116773
Review on Base Isolated Structures
Review on Base Isolated Structures
Effect of modeling of infill walls on performance of multi story rc building
Effect of modeling of infill walls on performance of multi story rc building
PANDEESWARI
PANDEESWARI
Highly Deformable Energy-Dissipating Reinforced Concrete Elements in Seismic ...
Highly Deformable Energy-Dissipating Reinforced Concrete Elements in Seismic ...
Mehr von IAEME Publication
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME Publication
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
IAEME Publication
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
IAEME Publication
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
IAEME Publication
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
IAEME Publication
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
IAEME Publication
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
IAEME Publication
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IAEME Publication
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
IAEME Publication
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
IAEME Publication
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
IAEME Publication
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
IAEME Publication
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
IAEME Publication
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
IAEME Publication
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
IAEME Publication
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
IAEME Publication
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
IAEME Publication
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
IAEME Publication
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
IAEME Publication
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
IAEME Publication
Mehr von IAEME Publication
(20)
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
Kürzlich hochgeladen
Automating Google Workspace (GWS) & more with Apps Script
Automating Google Workspace (GWS) & more with Apps Script
wesley chun
Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024
The Digital Insurer
Driving Behavioral Change for Information Management through Data-Driven Gree...
Driving Behavioral Change for Information Management through Data-Driven Gree...
Enterprise Knowledge
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
Earley Information Science
A Domino Admins Adventures (Engage 2024)
A Domino Admins Adventures (Engage 2024)
Gabriella Davis
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Drew Madelung
Workshop - Best of Both Worlds_ Combine KG and Vector search for enhanced R...
Workshop - Best of Both Worlds_ Combine KG and Vector search for enhanced R...
Neo4j
Scaling API-first – The story of a global engineering organization
Scaling API-first – The story of a global engineering organization
Radu Cotescu
08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men
Delhi Call girls
[2024]Digital Global Overview Report 2024 Meltwater.pdf
[2024]Digital Global Overview Report 2024 Meltwater.pdf
hans926745
Artificial Intelligence: Facts and Myths
Artificial Intelligence: Facts and Myths
Joaquim Jorge
Boost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivity
Principled Technologies
GenAI Risks & Security Meetup 01052024.pdf
GenAI Risks & Security Meetup 01052024.pdf
lior mazor
08448380779 Call Girls In Diplomatic Enclave Women Seeking Men
08448380779 Call Girls In Diplomatic Enclave Women Seeking Men
Delhi Call girls
Boost Fertility New Invention Ups Success Rates.pdf
Boost Fertility New Invention Ups Success Rates.pdf
sudhanshuwaghmare1
Histor y of HAM Radio presentation slide
Histor y of HAM Radio presentation slide
vu2urc
Exploring the Future Potential of AI-Enabled Smartphone Processors
Exploring the Future Potential of AI-Enabled Smartphone Processors
debabhi2
How to Troubleshoot Apps for the Modern Connected Worker
How to Troubleshoot Apps for the Modern Connected Worker
ThousandEyes
From Event to Action: Accelerate Your Decision Making with Real-Time Automation
From Event to Action: Accelerate Your Decision Making with Real-Time Automation
Safe Software
Finology Group – Insurtech Innovation Award 2024
Finology Group – Insurtech Innovation Award 2024
The Digital Insurer
Kürzlich hochgeladen
(20)
Automating Google Workspace (GWS) & more with Apps Script
Automating Google Workspace (GWS) & more with Apps Script
Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024
Driving Behavioral Change for Information Management through Data-Driven Gree...
Driving Behavioral Change for Information Management through Data-Driven Gree...
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
A Domino Admins Adventures (Engage 2024)
A Domino Admins Adventures (Engage 2024)
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Workshop - Best of Both Worlds_ Combine KG and Vector search for enhanced R...
Workshop - Best of Both Worlds_ Combine KG and Vector search for enhanced R...
Scaling API-first – The story of a global engineering organization
Scaling API-first – The story of a global engineering organization
08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men
[2024]Digital Global Overview Report 2024 Meltwater.pdf
[2024]Digital Global Overview Report 2024 Meltwater.pdf
Artificial Intelligence: Facts and Myths
Artificial Intelligence: Facts and Myths
Boost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivity
GenAI Risks & Security Meetup 01052024.pdf
GenAI Risks & Security Meetup 01052024.pdf
08448380779 Call Girls In Diplomatic Enclave Women Seeking Men
08448380779 Call Girls In Diplomatic Enclave Women Seeking Men
Boost Fertility New Invention Ups Success Rates.pdf
Boost Fertility New Invention Ups Success Rates.pdf
Histor y of HAM Radio presentation slide
Histor y of HAM Radio presentation slide
Exploring the Future Potential of AI-Enabled Smartphone Processors
Exploring the Future Potential of AI-Enabled Smartphone Processors
How to Troubleshoot Apps for the Modern Connected Worker
How to Troubleshoot Apps for the Modern Connected Worker
From Event to Action: Accelerate Your Decision Making with Real-Time Automation
From Event to Action: Accelerate Your Decision Making with Real-Time Automation
Finology Group – Insurtech Innovation Award 2024
Finology Group – Insurtech Innovation Award 2024
Earthquake response of modified folded cantilever shear structurewith fix
1.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 194 EARTHQUAKE RESPONSE OF MODIFIED FOLDED CANTILEVER SHEAR STRUCTURE WITH FIXED-MOVABLE-FIXEDSUB-FRAMES Ming Narto Wijaya1 , Takuro Katayama2 , Ercan Serif Kaya3 , Toshitaka Yamao4 1 (Architectural and Civil Engineering, GSST, Kumamoto University, 860-8555, Japan) 2 (Faculty of Engineering, Eco Design, Sojo University, 860-0082, Kumamoto, Japan) 3 (Architectural and Civil Engineering, GSST, Kumamoto University, 860-8555, Japan) 4 (Architectural and Civil Engineering, GSST, Kumamoto University, 860-8555, Japan) ABSTRACT Seismic performances of sixteen-storey folded cantilever shear structure (FCSS) with roller bearing and additional viscous damper have been studied using a shake table. The structures consist of fixed-movable-fixed supported shear sub-frames and connection rigid sub-frame which connect their sub-frames at the top. The movable sub-frame is supported by roller bearings and additional viscous damper are attached laterally between beams. Experimental and numerical analyses were conducted to identify dynamic responses of model with and without additional viscous damper. In order to observe the efficiency of the additional viscous damper and the effect of earthquake ground motion under three different strong ground motions, namely El-Centro, Hachinohe, and Taft earthquakes, both numerical analysis and shaking table test of the model with and without additional viscous damper were conducted. The maximum displacements, for top fixed floor and bottom movable floor were significantly reduced with the addition of viscous damper system of structure. A reasonable agreement between results obtained from numerical analysis and shaking table test were also obtained. Keywords: Seismic performance, folded cantilever shear structure, viscous damper, damping ratio, shaking table test. I. INTRODUCTION In recent years, earthquake is one the most important issue of structural engineering problem. It has caused significant loss of life and severe damage to structures. Many seismic construction designs and technology have been developed over the years in attempts to mitigate the effects of earthquake on buildings. Some protective systems have been used to enhance safety and reduce damage of structures during earthquakes. The most practical and reliable method of reducing seismic INTERNATIONAL JOURNAL OF CIVIL ENGINEERING AND TECHNOLOGY (IJCIET) ISSN 0976 – 6308 (Print) ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), pp. 194-207 © IAEME: www.iaeme.com/ijciet.asp Journal Impact Factor (2013): 5.3277 (Calculated by GISI) www.jifactor.com IJCIET © IAEME
2.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 195 structural response are seismic base isolation and passive energy dissipation system such us fluid and friction dampers. Recently, many researchers have been studied about seismic isolation systems. N. Torunbalci [1] was studied seismic isolation and energy dissipating systems for improving the seismic performance of structures. These techniques reduce the seismic forces by changing the stiffness and/or damping in the structures. The research and development work of passive, active, and hybrid devices are ongoing intensively.Y.M Wu and B. Samali[2] investigated of five-storey benchmark model isolated with rubber bearing. Numerical analysis and shake table testing of model with and without the isolation system were studied under four different strong ground motions. It was found, from both numerical analysis and shake table testing, that the isolation effectiveness offered by the rubber bearings to earthquake inputs is strongly dependent on the type of earthquake motion. The displacement for all floors was significantly reduced with the addition of a rubber isolation system, regardless of ground motion input. N. Torunbalci and G. Ozpalanlar [3] were evaluated of earthquake response for base isolated building. The most important characteristic of the structural system, in terms of determining its response against the earthquake, is its natural period. The natural period depends on the mass, horizontal rigidity and damping of structure. One of the important things the seismic isolation actualizes on the structure is the prevention of coincidence with the fundamental period of the earthquake by increasing the natural period of the structure. Accordingly, the using of seismic isolation provides approximately seventy five percent decreases in the base shear forces on the structure. N. Torunbalci and G. Ozpalanlar [4] also studied earthquake responses of building with various seismic isolation techniques. The model building is analyzed in the nonlinear time domain both for fixed base situation and also by using various seismic isolation and earthquake protection alternatives such us rubber bearing, friction pendulum bearing, additional isolated story and viscous damper. It shows that acceleration and story drift in all various alternatives, is significantly reduced especially in the fixed-base alternative. The other hand, Azuma et al. [5] is discussed the seismic response control of a building by connecting to an adjacent building with coupling energy dissipating devices. Ten-storey and five-storey structures were investigated under artificial ground motion. Those structures were connected with rigid or bilinear hysteretic or viscous damping elements. The coupling showed that story drift and floor acceleration can be reduced. And also, Ohamiet al. [6] studied about retrofitting seismically vulnerable buildings by externally inter-connecting to an adjacent building. The rigid element and viscous damper connecting element are used to connect between old five-storey building and new ten-storey building.The collapse of an old building can be prevented by connecting to a new stiff building using rigid elements, if viscous damper connecting elements are used, damage of the old building concentrated in a specific story.Limazie .T et al.[7]proposed structure is called mega-sub controlled structure system. This structure are designed as modulated sub-structures and fixed to the mega- beams structures, additional columns are introduced between mega-frame and the top-level of substructures. Structural parameters are examined and compared to the mega-sub structures. The results show that mega-sub controlled structure as proposed structure obviously improves the structures safety under seismic action, reduces displacement, velocity, and acceleration responses when subjected to random load, and also improves the comfort of the structure. On the basis of those studies, some alternative seismic isolation was offered. It summarized that combination of seismic isolation can reduce seismic responses of buildings. Kaya et al. [8] were proposed a newly designed structure named Folded Cantilever Shear Structure (FCSS). It is proposed an alternative seismic isolation approach that combines roller bearing as base isolation and viscous damper as connection between inter-stories to improve seismic performance and increase natural period.The proposed folded cantilever shear structure is designed consisting of mainly two parts, fixed shear sub-structure and movable shear sub-structure. These sub-structures are interconnected by a rigid connection beam at the top of the sub-structures. Besides, additional viscous dampers are
3.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 196 supplemented to connect fixed and movable shear sub-structures with each other horizontally on the base of stories. The analytical study was carried out to examine FCSS structure, also compare with ordinary cantilever shear structure (OCSS) and FCSS without additional damper. From the results show the proposed model FCSS is capable of extending the natural period two times compared to ordinary structure and also can decrease the displacement responses due to earthquake. In this study, Folded Cantilever Shear Structure (FCSS) is modified to acquire symmetrical structural regularity. The proposed modified structure is designed consisting of fixed-movable-fixed shear sub-structures.At the top roof, rigid beam is used as a connection between fixed and movable parts. The purpose of this study are improving seismic performance of building structure and investigate the efficiency of additional viscous damper by modifying the FCSS model from previous study under different earthquake motion using shaking table test. To compare results of shake table testing, numerical analyses is conducted to verify of analytical methods. II. STRUCTURAL AND GEOMETRIC FEATURES 2.1 Model of FCSS As shown in Fig. 1 is structure plan view of the vibration model. The proposed structure model is arranged symmetrically, fixed sub-frames on the both edge sides and movable sub-frames at middle of structure. Rigid beam is used to connect the fixed-movable-fixed sub frames at the top of structure (Floor-16). The assembled structure of front view in x-z direction shown in Fig. 1 (a) and side view in y-z direction shown in Fig. 1 (b) and (c). The fixed sub frames are clamped at the base of structure. The movable sub frame (Floor-1) is supported by roller bearing and can move horizontal. Z-axis direction is fixed, moving condition of the movable sub frame in the x and y direction. The total floor of structure is 16-stories. Total height of structure is 1470 mm. (a) Front view (b) Side view Fig.1.Geometric of experimental vibration model
4.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 197 Between fixed sub frame and movable sub frame is connected by using viscous damping device for each floor horizontally. Viscous damping device is operated in the x-y horizontal plane. The detail of viscous damping device will describe in next section. Polycarbonate (PC) screw rods with M10 are used to all the columns of the model. Since the maximum length of the available polycarbonate is about 1000 mm, set up a column joints with plastic nut at the 11th floor. And 120 mm height for 11th floor, and 90 mm height for the other floors typically. According to the tension and bending test of polycarbonate rod of column, the axial stiffness (AE) was obtained around 1.10x105 N and flexural stiffness (EI) was 5.65x105 N.mm2 . Aluminum alloy (A5052) rectangular plates with 5 mm thickness are used as beams for each floor. Shown in Fig. 1, the mass floor of fixed sub frame, movable sub frame, and connection sub frame are represented mF, mM, mC, respectively. kF, kM, kC, are column stiffness of fixed, movable, and connection sub frame, respectively. The total mas for each floor are 2.5 kg of fixed sub frame floor, 3.8 kg of movable sub frame floor, and 6.1 kg of connection floor at the top. 2.2 Mechanical properties of elements 2.2.1 Shear spring coefficient of model In order to determine the inter-storey shear spring coefficient of the movable sub frame and fixed sub frame, the quasi-static loading test on the vibration test model was conducted. Shown in Fig.2, the horizontal force P is applied at 1st floor of the movable sub frame and the horizontal displacement u29and u44 were measured by using laser displacement sensor. u1, u2, u3… u14andu15, u16, u17… u28 are horizontal displacement in x direction of the floor-2 to floor-15 at the fixed sub frame of the left and right side, respectively. And also u29, u30, u31… u43 for movable sub frame. Fig.2. Experimental vibration model Fig. 3 represents the horizontal force-displacement due to loading test. The slope of force- displacement history curve at top floor u44is about 7.4 N/mm; inter-storey shear spring coefficient from this value is 56 KN/m. Slope at movable bottom floor, the force-relative displacement (u29 - u44) is 3.8 N/mm, shear spring coefficients is 57 KN/m. The average of both these value is 56.5 KN/m was used as shear spring coefficient for the elastic dynamic response analysis, eigenvalue analysis and also simulation. The gap between unloading and loading from the graph is around 2.9 N. It
5.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 198 Upper shoe Lower shoe Roller bearing guide Base plate -40 -30 -20 -10 0 10 20 30 40 -10 -5 0 5 10 Horizontalforce(N) Didplacement (mm) 44u 29 44u u− 2.9 N considered that the half of this valueis the maximum static friction force of the roller bearing, is about 1.45 N. The total mass of movable sub frame without connection beam at the top floor is about 57.0 kg. Assumed that the movable structures are support one third of the connection beam at the top floor, is 4.1 kg. Therefore, the total mass of movable part of structure is 61.1 kg, approximately. And the total vertical force is about 600 N due to gravity. Static friction coefficient of roller bearing can be estimated from the ratio of friction force and vertical force about 0.0024. Fig.3. Quasi-static loading tests Fig.4.Roller bearing device 2.2.2 Roller Bearing Device The set of roller bearing components are shown in Fig. 4. Roller bearing consist of upper and lower shoes with 30 mm of diameter, 60 mm diameter of bearing guide and 6 mm thickness of base plate. Upper shoe has a convex surface to place on the concave surface of lower shoe. Disc shaped roller bearing guide consists of 55 steel balls of 4 mm diameter, embedded within the bearing guides, for providing highly smooth surface in order to decouple the structure from the ground. Upper shoes, lower shoes and bearing guide were made of carbon steel (SC50C) and ball bearings were made of steel (SUJ2) material. Fig. 5 presents the friction test procedure to determine the friction characteristics of roller bearing. Here, a pair of upper shoe - lower shoe - roller guide were placed upside and underside of the base plate. Then the base plate was forced to move back and forth through electric activator while the mechanism was under loading weight. The displacement of the base plate was measured through a laser measurer. Fig.5. Friction test of roller bearing Upper and lower shoes Roller guide P, force Base plate Loading rod W, weight Upper and lower shoes HorizontalForce(N)
6.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 199 The history of a horizontal displacement and horizontal force is shown in Fig.6. It was applied the vertical force of 123 N. Vertical axis is represent the ratio of horizontal and vertical force. Maximum static friction coefficient was estimated from quasi-static loading test in previous section is about 0.0024, it is half between 0.003 and 0.0012. Fig.6. Friction coefficient of roller bearing 2.2.3 Viscous damping device The components and cross section of viscous damping device are shown in Fig. 7. It was designed that consist of container with two silicon oil pools, connection plates and parallel plates.The dimensions of the container are 60 × 150 × 20 mm (width × length × depth). The bottom surface of the parallel plates has 20 mm width and 110 mm length with 5 mm cut edge. So the bottom surface area of the parallel plates becomes a = 2150 mm2 . Each of these three parts was made of aluminum alloy. The calculation of viscous damping coefficient of damper device can be estimated as: ε µa d 2 '= (1) Where ɛis the gap between lower surface of the parallel plate and base surface of the container, ais the lower surface area of the parallel plate, µ is the dynamic viscosity of the silicon oil and d’ is the viscous damping coefficient due to only one connection plate. Therefore the viscous damping coefficient becomes d = 2 d'for two connection plates. Fig.7. Cross section of viscous damping device The viscous damper was subjected to performance test to obtain the viscous damping coefficient. The container was forced to move back and forth in the vertical direction through electric activator and the reaction forces were obtained through load cell for different gaps as illustrated in Fig.8 (a). The relationship of the viscous damping coefficient d’ and the gap ɛare shown in Fig. 8 (b). The kinetic viscosity 25 0 C of silicon oil υ = 3000 mm2 /s and the density = 970 kg/m3 were used in the experiment. Therefore, the dynamic viscosity µ25 0 C = 2.91 Ns/m2 . The temperature of the silicone -5 -4 -3 -2 -1 0 1 2 3 4 5 -15 -10 -5 0 5 10 15 Displacement (mm) Test 0.0012 0.0034 -0.0012 -0.0034 Displacement (mm) P/W(10-3 ) Parallel plate Connection plate Oil poolsOil poolsOil poolsOil pools Connection plate Gap, ε Parallel plate Container Silicon oil
7.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 200 0 5 10 15 20 0 2 4 6 8 10 d'(Ns/m) Gap, ε (mm) Test (21℃) Theory (21℃) Theory (25℃) oil during the experiment is 210 C and the viscosity change rate by temperature is 1.08. Then the dynamic viscosity µ21 0 C = 3.14 Ns/m2 . The assembled structure can be seen in Fig. 9. The roller bearing and viscous damping device was constructed for whole structure to conduct the experiment study. (a) Test of viscous damping device (b) Coefficient of viscous damping device Fig.8. Performance test of viscous damping device Fig.9. Component of experimental model Direction of motion P, reaction force Connection plate Electric actuator Roller bearing
8.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 201 -1 1 3 5 7 9 11 13 15 17 Floor Stand still Roof Centralaxis (a) Stand still -1 1 3 5 7 9 11 13 15 17 Floor T1= 0.808s Roof Centralaxis 44 0.075φ = 29 0.136φ = (b) First natural vibration mode -1 1 3 5 7 9 11 13 15 17 Floor T2= 0.330s Roof Centralaxis 44 0.101φ = 29 0.131φ = − (c) Second natural vibration mode -1 1 3 5 7 9 11 13 15 17 Floor T3= 0.200s Roof Centralaxis 0.162− 22φ = 0.162 8φ = (d) Third natural vibration mode III. EXPERIMENTAL STUDY OF FCSS MODEL 3.1 Complex eigenvalue analysis The eigenvalue and eigenvector analysis of experimental model were calculated by using complex eigenvalue analysis [8] and [9] to obtain the natural vibration mode and natural period theoretically. Fig. 10 shows the natural vibration mode. The first, second, and third modes were obtained with natural period and also amplitude of vibration mode. Fig. 11 show the relationship between additional damping constant ∆ζ, damped period Td and viscous damping constant. The additional damping constant is increase by improving the viscous damping constant. Fig.10. Natural vibration mode of experimental model
9.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 202 T1 ζ0 + ζe Theory Td1 ζ0 + ζe+ ζ From the analytically, the first natural period of the model is T1 = 0.808s for the model without additional viscous damping device, the additional damping constant and first natural period with viscous damping constantd =15 Ns/m are ∆ζ=0.233 and T1 = 0.796 s, respectively. Fig.11.Additional damping constant and damped period 3.2 Free vibration test Free vibration experiments provide one means of determining the natural period and damping ratio of the structure. It is useful for comparing simulation model during the theoretical and numerical study. The free vibration test was conducted manually. The model is induced for few times laterally. The displacements were recorded during oscillation until it came to rest. This process was repeated for 10 times to get results precisely. The free vibration test was carried out for vibration model with and without additional damping system. Theoretical and experimental of periods and damping ratio are calculated and plotted in the Fig. 12. The first period of the FCSS without additional damper is around T1 = 0.808 s and the FCSS with damper is Td1 = 0.796 s. (a) FCSS without additional damper (b) FCSS with additional damper Fig.12. Natural period and damping test of FCSS 0.0 0.1 0.2 0.3 0.4 0 5 10 15 20 25 Additionaldampingconstant,∆ζ d (Ns/m) First Second Third 0.0 0.2 0.4 0.6 0.8 1.0 0 5 10 15 20 25 Dampedperiod,Td(s) d (Ns/m) First Second Third 0.233ζ∆ = 1 0.796sdT = Viscous damping constant d(Ns/m) Viscous damping constant d(Ns/m)
10.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 203 As shown above, ζ0 is constant structural damping; ζe is equivalent damping constant due to frictional force obtained from Eq. (2), ζ is additional viscous damping constant and a is displacement amplitude. i ibb e a x f φ πθω φ ζ 2 = (2) where, fb is friction force of the roller bearing, ɸb is the amplitude of natural vibration mode at movable base, ɸi is the amplitude of natural vibration mode at observation point, θ is frequency during a steady state motion, ω is natural frequency, ai is displacement amplitude of observation point, Katayama et al.[10]. The total force of the movable sub frame is around 600 N and the friction coefficient of roller bearing is 0.0012. Therefore, the friction force of roller bearing is 0.72 N. The structural damping of vibration model is assumed, ζ0 = 0.015.In Fig. 12 (a), the total damping ratio is sum of structural damping and friction damping, while in Fig. 12 (b) it will be added by additional viscous damping. In here, the additional viscous damping device was used by 2 mm gap and as shown in Fig. 8 (b), the viscous damping is around d’= 7.5 Ns/m. For two connection plate of damping device is d = 2d’ = 15 Ns/m. The additional viscous damping constant can be estimated from Fig. 11, ζ = 0.233. And also in Fig 11, from complex eigenvalue analysis the first damped period Td1 = 0.796s. 3.3 Shaking table test The shake table test is carried out to observe the seismic response of proposed model with and without additional damper under the earthquake data wave. As the input excitation to the shake table, three earthquake wave records: El Centro (1940), Hachinohe (1968) and Taft (1952) were used. Maximum acceleration for each earthquake is 50 gal scaled. Fig.13. Shaking table test of sixteen-storey FCSS model Fig. 13 shows the sixteen-storey of FCSS model on the shake table, and ready to be tested. The displacements floor of the test model was measured using laser displacement at the top floor and movable bottom floor.To set an example, only displacement history responses due to El Centro NS
11.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 204 -10 -5 0 5 10 0 5 10 15 20 25 30 35 Displacement(mm) Time (sec.) EL CENTRO(NS) Movable bottom floor without damper with damper -10 -5 0 5 10 0 5 10 15 20 25 30 35 Displacement(mm) Time (sec.) EL CENTRO(NS) Most upper floor without damper with damper earthquake are given in Fig. 14. Then the maximum displacement responses of the others are summarized graphically of bar chart in Figure 15. (a) Movable bottom floor (b) Most upper floor Fig.14. Time histories of displacement responses of FCSS model Fig.14 show the displacement responses of proposed FCSS model at the bottom floor. In here, the displacement responses decrease significantly when the additional damper is attached in structure. In the other side at the most upper floor, effect of additional damper is not significant than at the bottom, however it still can reduce the displacement responses. Fig.15 show maximum displacement responses for all earthquake data waves. As mentioned above, the additional damper gives effect significantly to reduce the maximum displacement at the bottom floor than the most upper floor. It is shown when the additional damper attached in model; the maximum displacement is decrease, generally. For instance in Fig. 15 (a), a dramatic reduction in maximum model displacement is seen for FCSS with damper, which demonstrates the capability of viscous damping device in protecting the structure against the earthquake.
12.
International Journal of
Civil Engineering and (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July Fig.15. Maximum Besides, the confirming of experimental model was conducted to verify the results with numerical analysis. The experimental model was modeled by simplified model as spring model by used commercial software Abaqus. experimental. (a) Experimental model (b) Simplified model (spring Fig.16. Experimental model and numerical model 0 5 10 15 EL CENT/EW EL CENT/NS 0 5 10 15 EL CENT/EW EL CENT/NS Maximumdisplacement (mm)Maxi mum displa ceme nt (mm) International Journal of Civil Engineering and Technology (IJCIET), ISSN 0976 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 205 (a) Movable bottom floor (b) Most upper floor Fig.15. Maximum displacement responses of FCSS model Besides, the confirming of experimental model was conducted to verify the results with numerical analysis. The experimental model was modeled by simplified model as spring – mass model and 3D oftware Abaqus. As shown in Fig. 16 is simulation (b) Simplified model (spring-mass) (c) 3D model . Experimental model and numerical model EL CENT/NS HACHI/EW HACHI/NS TAFT/EW TAFT/NS with damper without damper EL CENT/NS HACHI/EW HACHI/NS TAFT/EW TAFT/NS with damper without damper Technology (IJCIET), ISSN 0976 – 6308 August (2013), © IAEME Besides, the confirming of experimental model was conducted to verify the results with numerical mass model and 3D As shown in Fig. 16 is simulation model of (c) 3D model TAFT/NS without damper TAFT/NS without damper
13.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 206 -10 -5 0 5 10 0 10 20 30 40 50 Displacement(mm) Time (second) Experiment result Spring-Mass Model Comparison of displacement time history record between experimental and numerical results is shown in Fig. 17. This figure depicts the displacement responses of FCSS with and without additional viscous damping device model at bottom movable floor with respect to ground motion under the El Centro NS earthquake. It can be seen that the values of time history displacement responses obtained from numerical analysis are very close to those from shake table testing. (a) Without additional damper (b) With additional damper Fig.17. Comparisons of FCSS model displacement responses at bottom movable floor IV. CONCLUSION In the present study, experimental model of folded cantilever shear structure (FCSS) was conducted. This model is modified from the previous study. New model is consisting of fixed – movable – fixed sub frames. According to the free vibration test, shake table testing and numerical analysis, it is found that: 1. The new proposed FCSS model is also capable of increasing natural period and decreasing seismic responses. 2. Based on shake table testing of model, it is important to use additional damping device to reduce the displacement responses. 3. A good agreement between the results of shake table testing and those of numerical analysis was obtained. 4. The effectiveness damper device of structure is also influenced by the type of earthquake. However, proposed FCSS model has seismic responses stability of the different earthquake ground motion. -10 -5 0 5 10 0 10 20 30 40 50 Displacement(mm) Time (second) Experimental result Spring-Mass Model -10 -5 0 5 10 0 10 20 30 40 50 Displacement(mm) Time (second) Experimental result ABAQUS3D model 3D model
14.
International Journal of
Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online) Volume 4, Issue 4, July-August (2013), © IAEME 207 V. ACKNOWLEDGMENTS The authors acknowledge and express appreciation to Prof. Yoji Mizuta from Kyushu Sangyo University, Fukuoka, for his contributions and providing the shaking table device. REFERENCES [1] N. Torunbalci, Seismic isolation and energy dissipating systems in earthquake resistant design, Proc. 13th World conference on earthquake engineering, 13WCEE, Vancouver, Canada, 2004, Paper no. 3273. [2] Yi Min Wu and Bijan Samali, Shake table testing of base isolated model, Journal of Engineering Structures, 24, 2002, 1203-1215. [3] N. Torunbalci and G. Ozpalanlar, Evaluation of earthquake response analysis methods for low-rise base isolated buildings, Proc. 14th World conference on earthquake engineering, 14WCEE, Beijing, Cina, 2008, Paper Id: 05-01-0015. [4] N. Torunbalci and G. Ozpalanlar, Earthquake response analysis of mid-story buildings with various seismic isolation techniques, Proc. 14th World conference on earthquake engineering, 14WCEE, Beijing, Cina, 2008, Paper Id: 05-01-0014. [5] Y. Azuma, S. Otani, and K. Ohami, Seismic response control by interconnecting adjacent buildings, Proc. 4th International conference on earthquake engineering, Taipei, Taiwan, 2006, Paper no.188. [6] K. Ohami, S. Otani and S. Abe, Seismic retrofit by connecting to adjacent building, Proc. 14th World conference on earthquake engineering, 14WCEE, Beijing, Cina, 2008, Paper Id: 05-01-0106. [7] T. Limazie, X. Zhang, and X. Wang, The nonlinear Dynamic Elasto-plastic analysis for evaluating the controlling effectiveness and failure mechanism of the MSCSS, Proc. International Conference World Academy of Science, Engineering and Technology, Bangkok, Thailand, 2011, 495-500. [8] Ercan Serif Kaya, Takuro Katayama and Toshitaka Yamao, “Seismic Characteristics of the Folded Cantilever Shear Structure”, International Journal of Civil Engineering & Technology (IJCIET), Volume 4, Issue 2, 2013, pp. 58 - 79, ISSN Print: 0976 – 6308, ISSN Online: 0976 – 6316. [9] Foss K., Coordinate which uncouple the equations of motion of damped linear dynamic systems. Journal of Applied Mechanics, 1958, 32(3), 361-364. [10] T.Katayama, T.Yamao, Natural vibration modes of a Folded Cantilever Shear Structure, Proc. 4th International conference on Advances in Structural Engineering and Mechanics (ASEM), Jeju, Korea, 2008, 1317-1325. [11] Wani Ahmad, Singh Amarpreet, Iqbal Sana, Lal Nawaf and Bhat Javed, “Development of Economized Shaking Platforms for Seismic Testing of Scaled Models”, International Journal of Advanced Research in Engineering & Technology (IJARET), Volume 3, Issue 2, 2012, pp. 60 - 70, ISSN Print: 0976-6480, ISSN Online: 0976-6499. [12] Mohammed S. Al-Ansari, “Building Response to Blast and Earthquake Loading”, International Journal of Civil Engineering & Technology (IJCIET), Volume 3, Issue 2, 2012, pp. 327 - 346, ISSN Print: 0976 – 6308, ISSN Online: 0976 – 6316.
Jetzt herunterladen