Impression of Straumann Bone Level implant using a temporary abutment

1. CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS
1. Prepare customized temporary 2. The desired emergence profile 3. Now that the emergence profile 4. A stock impression post must be
abutment to meet your desired for the implant will be achieved has been developed, you will now customized to capture soft tissue
emergence profile. with the provisional. want to capture this same emergence emergence profile.
Straumann® is a registered trademark of Straumann Holding AG, or its affiliates. All rights reserved.
profile when taking a final impression.
2/09
USLIT 269
Blu-Mousse is a registered trademark of Parkell Products, Inc. All rights reserved.
Straumann products are CE marked
5. Connect custom temporary abut- 6. Fill small vessel with bite 7. Apply bite registration material 8. Embed the temporary abutment,
ment and provisional to implant analog. registration material, such as to the abutment and analog to provisional and implant analog into
Blu-Mousse®. ensure a complete impression is the bite registration material. Once
taken. material sets, remove provisional
and temporary abutment.
© Straumann USA, LLC 2009
®
9. Notice the transfer of the 10. Connect impression coping to 11. Fill the impression with cold 12. Let temporary material cure.
shape of the temporary into the implant analog in bite registration cure or auto-polymerizing rapid
material. Mark the buccal position material. cure temporary material.
for orientation.
RC COMPONENTS
025.4202 RC Impression post,
with guide screw
024.4370 RC Temporary meso
abutment D 7.0 mm
025.4101 RC Implant analog
NC COMPONENTS
13. Unscrew temporary post and 14. Notice the matching emergence 15. Screw the custom impression post
025.2202 NC Impression post,
trim excess material. Fill any voids, profile of the temporary abutment into the implant and take impression.
with guide screw
polish and take impression. and impression post. Once impression material sets, unscrew
024.2370 NC Temporary meso
the impression post and remove impression.
abutment D 5.0 mm
The master cast is now ready to be
fabricated after the lab analog has 025.2101 NC Implant analog
been placed into the impression.
Photos courtesy of: Samuel Zfaz, DDS – Fred Norkin, DMD – Jeffrey Ganeles, DMD