In a grinding wheel, the abrasive play out same function from the teeth in a saw. In any case, in contrast to a saw, which has teeth just on its edge, the grinding wheel has grating grains conveyed all through the wheel. Picking the wrong thing can result in the waste of time and cash.
Along these lines, continue perusing this PPT to Understand "Picking the Right Grinding Disks for Your Application!"
2. The grinding disc is a widely used
cutting tool that is provided by almost
all the metal cutting tools
manufacturer.
It's basically an abrasive cutting tool
and in a grinding disc, the abrasive play
out same function as the teeth in a
saw.
In any case, in contrast to a saw, which has teeth just on its edge, the grinding disc has
abrasive grains disseminated all through the disc.
A huge number of these hard, extreme grains move against the work-piece to remove little
chips of material.
3. Abrasive cutting tool manufacturers
offer a wide number of items for a wide
number of grinding applications in
metalworking.
Picking the wrong item can result in the
waste of time and cash.
So, keep reading to choose the right
grinding discs for your application.
Finding the grinding disc or cutting wheel you require relies upon the materials you'll be
working with: metal, stone, concrete, or any other.
4. Aluminum oxide: Grinding discs made of aluminum oxide are
the most widely utilized while working with metals. There are
likewise abrasives made of zirconia alumina, a mix of
aluminum oxide and zirconium oxide. Zirconia alumina is a
rock-solid substance that doesn't chip, so you don't need to
change the disc as frequently.
This abrasive may cost more than others; however, the life
span will be much longer. Aluminum oxide grinding wheels can
also be utilized on ferrous metals, nonferrous metals, iron and
steel. Zirconia alumina will chip away at steel, iron, and
bronze.
While using grinding discs, you also need to make sure that
the grinding disc must be free of contaminant. Any
contaminant will rust before you ground it, so you need to
begin with another wheel, or granulate just hardened steel
utilizing the wheel. Never blend wheel use when you are
working with the stainless steel.
ALUMINUM OXIDE
5. Silicon-carbide: Silicon-carbide based grinding discs are
utilized for cutting / grinding chilled and gray cement, iron,
stone as well as other non-ferrous materials (copper, soft
bronze, brass, magnesium, aluminum) and nonmetallic
(gemstones, ceramics, and ribbers), since they are more
diligently and more fragile than aluminum-oxide wheels.
Nonetheless, despite the fact that silicon-carbide abrasives
are sharp, they separate rapidly and subsequently, they are
not effective with regards to heavy grinding.
They work best under lightweight and are an amazing choice
for putting on a smooth and perfect finish.
SILICON-CARBIDE
6. Natural diamonds: They can be utilized for grinding hard
materials (like rock, stone, solidified carbides, marble),
however, they have totally been taken out of the market by
synthetic diamond discs, because of the ease of use and
affordable cost of the latter.
Synthetic diamonds utilized for grinding aluminum oxide
cutting tools, hard steels and solidified carbide.
NATURAL DIAMONDS
7. Cubic boron nitride: It is a sharp, cool as well as incredibly
hard abrasive (2.5x harder than aluminum oxide and
nearly as hard as diamond).
It is utilized for grinding super-hard, fast steels, solidified
cast irons, die and stainless steels. Metal-covered
abrasives are utilized for universally useful grinding, and
uncoated abrasives are utilized in vitrified bond and
electroplated metal systems.
Depending upon your use and the item to be worked on,
you have to choose the grinding discs wisely from a good
abrasive cutting tool manufacturers.
CUBIC BORON NITRIDE
8. BIPICO, an ISO 9001:2008 company is established in November – 1974
And is proud of its more than four decades journey as a manufacturer of
Hacksaw Blade to Bimetal Bandsaw Blade
BIPICO has grown into a major cutting tools manufacturer and exporter
with a strong brand image in India and in International markets.
How We Came About
OUR HISTORY