UNIT-V FMM.HYDRAULIC TURBINE - Construction and working
Renolit cxi 2
1. RENOLIT CXI 2
Calcium Sulphonate Complex Grease For
Heavily Loaded Rolling Or Plain Bearing
Description
RENOLIT CXI 2 is an optimised calcium sulphonate
complex thickened grease based on selected base
oils. RENOLIT CXI 2 shows very good characteristics
concerning water resistance, even concerning acids
and alkaline solutions, working stability, corrosion
protection and oil separation. RENOLIT CXI 2 should
be used for all lubrication points requiring a high
performance in relation to water resistance, working
stability, EP and AW properties.
Application
RENOLIT CXI 2 was developed to work under severe
conditions in plain and roller bearings in steel mills,
paper industry, mining, concrete industry, quarries and
construction equipment. RENOLIT CXI 2 is easily
pumpable even in long tubes, fed by centralised
lubrication systems.
Advantages / Benefits
• Good corrosion protection, even in the
presence of salt water.
• Resistant to aging.
• Water resistant.
• Smooth structure.
June 2004 GDUK Page 1 of 2
FUCHS LUBRICANTS (UK) PLC. Tel: +44-8701 -20 04 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU contact-uk@fuchs-oil.com
http://www.fuchslubricants.com
The above information is supplied to the best of our knowledge and belief on the basis of the
current state-of-the-art and our own development work. Subject to amendment.
I N F O R M A T I O N
Product
FUCHS (UK) PLC.
New Century Street
Hanley
GB-Stoke-on-Trent,
Staffordshire, ST1 5HU
2. Typical Data: RENOLIT CXI 2
Characteristics Unit Test Method
Classification KP 2 P-20
L-X-BEIB 2
DIN 51 502
ISO 6743-9
Colour Light brown
Thickening agent Calcium complex soap
Drop point ºC >270 DIN ISO 2176
Worked penetration 0.1 mm 265-295 DIN ISO 2137
Work stability ∆P w(100,000-60) 0.1 mm <20 DIN ISO 2137
Shell Roller test 72h/100ºC ∆Pw60 0.1 mm <20 ASTM D 1831
NLGI grade 2
Corrosion protection properties
with 3% NaCl (SKF-Emcor test)
degree of
corr. 0 - 0
DIN 51 802
Copper corrosion degree of
corr. 1 - 100
DIN 51 811
Water resistance eval.-stage 0 - 90 DIN 51 807-1
4 ball weld load N 6000 DIN 51 350
Timken test lbs 55 ASTM D 2509
Flow pressure at +20ºC
at -10ºC
at -20ºC
hPa
hPa
hPa
<50
<300
<1400
DIN 51 805
Oil separation at 18h / 40ºC
at 7d / 40ºC
at 18h / 80ºC
at 7d / 80ºC
%
%
%
%
<0.1
<1
<0.5
<2
DIN 51 817
Temperature range ºC -20 up to +160
Fluid Component
Type Mineral Oil
Kinematic viscosity
at 40ºC
at 100ºC
mm2/s
mm2/s
350
32
DIN 51 561-1
June 2004 GDUK Page 2 of 2
FUCHS LUBRICANTS (UK) PLC. Tel: +44-8701 -20 04 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU contact-uk@fuchs-oil.com
http://www.fuchslubricants.com
The above information is supplied to the best of our knowledge and belief on the basis of the
current state-of-the-art and our own development work. Subject to amendment.
I N F O R M A T I O N
Product
FUCHS (UK) PLC.
New Century Street
Hanley
GB-Stoke-on-Trent,
Staffordshire, ST1 5HU