SlideShare ist ein Scribd-Unternehmen logo

Rapid prototyping seminar

•Als PPT, PDF herunterladen•
•
A
avwhysoserious

Abhishek of RTC INSTITUTE OF TECHNOLOGY, ANANDI, ORMANJHI, RANCHI presents the powerpoint presentation on RAPID PROTOTYPING TECHNOLOGY.

Technologie
1 von 27
UNDER GUIDANCE OF 1. Dr. Israr Equbal Department of Manufacturing Engg., NIFFT, HATIA SUBMITTED BY Abhishek Raj B. Tech(Vth sem) Mechanical Engg. (2009-13) RTC INSTITUTE OF TECHNOLOGY ANANDI , RANCHI- 834 003
[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object],[object Object]
Selective Laser Sintering
[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
PT CAM uses a stereolithography machine produced by 3-D Systems and shown here: The Stereolithography Machine
[object Object],[object Object]
 
[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object]
                                                               FDM 2000 Specifications   Prodigy Specifications ,[object Object],[object Object],[object Object],Build Volume: 8" x 8" x 10" Materials: ABS, Casting Wax Build Step Size: 0.007", 0.010", 0.013" Up to 4x faster than the FDM 2000
[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object]
[object Object],[object Object],[object Object],[object Object]
 
[object Object],[object Object],[object Object],[object Object],Rapid prototyping Processes
 
Thank you

Empfohlen

Stereolithography (sla) 3 d printing ppt
Stereolithography (sla) 3 d printing pptStereolithography (sla) 3 d printing ppt
Stereolithography (sla) 3 d printing ppt
Innovae3dPvtLtd1
 
Selective laser sintering
Selective laser sinteringSelective laser sintering
Selective laser sintering
Alliance college of engineering and Design, Alliance university
 
Lecture: An introduction to additive manufacturing
Lecture: An introduction to additive manufacturingLecture: An introduction to additive manufacturing
Lecture: An introduction to additive manufacturing
Khuram Shahzad
 
FUSED DEPOSITION MODELING
FUSED DEPOSITION MODELINGFUSED DEPOSITION MODELING
FUSED DEPOSITION MODELING
BMS College of Engineering
 
Fused Deposition Modelling by Hari Prasad
Fused Deposition Modelling by Hari PrasadFused Deposition Modelling by Hari Prasad
Fused Deposition Modelling by Hari Prasad
Sachin Hariprasad
 
Introduction to 3D printing
Introduction to 3D printingIntroduction to 3D printing
Introduction to 3D printing
Manoj kumar
 
Rapid Prototyping
Rapid PrototypingRapid Prototyping
Rapid Prototyping
Hasitha Amarasekara
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
chella-durai
 

Empfohlen

Stereolithography (sla) 3 d printing ppt
Stereolithography (sla) 3 d printing pptStereolithography (sla) 3 d printing ppt
Stereolithography (sla) 3 d printing ppt
Innovae3dPvtLtd1
 
Selective laser sintering
Selective laser sinteringSelective laser sintering
Selective laser sintering
Alliance college of engineering and Design, Alliance university
 
Lecture: An introduction to additive manufacturing
Lecture: An introduction to additive manufacturingLecture: An introduction to additive manufacturing
Lecture: An introduction to additive manufacturing
Khuram Shahzad
 
FUSED DEPOSITION MODELING
FUSED DEPOSITION MODELINGFUSED DEPOSITION MODELING
FUSED DEPOSITION MODELING
BMS College of Engineering
 
Fused Deposition Modelling by Hari Prasad
Fused Deposition Modelling by Hari PrasadFused Deposition Modelling by Hari Prasad
Fused Deposition Modelling by Hari Prasad
Sachin Hariprasad
 
Introduction to 3D printing
Introduction to 3D printingIntroduction to 3D printing
Introduction to 3D printing
Manoj kumar
 
Rapid Prototyping
Rapid PrototypingRapid Prototyping
Rapid Prototyping
Hasitha Amarasekara
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
chella-durai
 
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING 3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
S. Sathishkumar
 
additive manufacturing
additive manufacturingadditive manufacturing
additive manufacturing
santanbharadwaj
 
3D PRINTING
3D PRINTING3D PRINTING
3D PRINTING
Toshendra Rajwade
 
prakash agrawal rapid tooling presentation
prakash agrawal rapid tooling presentationprakash agrawal rapid tooling presentation
prakash agrawal rapid tooling presentation
Akash Maurya
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
Ajaa Tahir
 
Rapid prototyping and tooling
Rapid prototyping and toolingRapid prototyping and tooling
Rapid prototyping and tooling
Thulasikanth Vaddi
 
Selective Laser Melting versus Electron Beam Melting
Selective Laser Melting versus Electron Beam MeltingSelective Laser Melting versus Electron Beam Melting
Selective Laser Melting versus Electron Beam Melting
Carsten Engel
 
3D Printing Technology & Its Applications
3D Printing Technology & Its Applications3D Printing Technology & Its Applications
3D Printing Technology & Its Applications
Ayush Srivastava
 
Laminated object manufacturing
Laminated object manufacturingLaminated object manufacturing
Laminated object manufacturing
Ankit Raghuwanshi
 
FDM FUSED DEPOSITION MODELLING
FDM FUSED DEPOSITION MODELLINGFDM FUSED DEPOSITION MODELLING
FDM FUSED DEPOSITION MODELLING
NileshKhona
 
rapid prototyping
rapid prototypingrapid prototyping
rapid prototyping
gosavianiruddha
 
Selective laser sintering
Selective laser sinteringSelective laser sintering
Selective laser sintering
HariKamal5
 
Rapid tooling (rt)
Rapid tooling (rt)Rapid tooling (rt)
Rapid tooling (rt)
Sachin Hariprasad
 
Additive manufacturing
Additive manufacturingAdditive manufacturing
Additive manufacturing
virat virat
 
RAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdateRAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdate
Kerrie Noble
 
Laminated object manufacturing
Laminated object manufacturing Laminated object manufacturing
Laminated object manufacturing
MANI SINGH
 
3dprintingppt 131210062711-phpapp02
3dprintingppt 131210062711-phpapp023dprintingppt 131210062711-phpapp02
3dprintingppt 131210062711-phpapp02
Divyesh Dave
 
SELECTIVE LASER SINTERING
SELECTIVE LASER SINTERINGSELECTIVE LASER SINTERING
SELECTIVE LASER SINTERING
Jagannath12345
 
Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)
ROLWYN CARDOZA
 
Stereolithography latest
Stereolithography latestStereolithography latest
Stereolithography latest
yuvarajeil
 
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESSTYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
Nurhuda Hayati
 
Rapid Prototyping and its Applications
Rapid Prototyping and its ApplicationsRapid Prototyping and its Applications
Rapid Prototyping and its Applications
malikusman
 

Weitere ähnliche Inhalte

Was ist angesagt?

3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING 3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
S. Sathishkumar
 
prakash agrawal rapid tooling presentation
prakash agrawal rapid tooling presentationprakash agrawal rapid tooling presentation
prakash agrawal rapid tooling presentation
Akash Maurya
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
Ajaa Tahir
 
Selective Laser Melting versus Electron Beam Melting
Selective Laser Melting versus Electron Beam MeltingSelective Laser Melting versus Electron Beam Melting
Selective Laser Melting versus Electron Beam Melting
Carsten Engel
 
Additive manufacturing
Additive manufacturingAdditive manufacturing
Additive manufacturing
virat virat
 
RAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdateRAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdate
Kerrie Noble
 

Was ist angesagt? (20)

3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING 3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
 
additive manufacturing
additive manufacturingadditive manufacturing
additive manufacturing
 
3D PRINTING
3D PRINTING3D PRINTING
3D PRINTING
 
prakash agrawal rapid tooling presentation
prakash agrawal rapid tooling presentationprakash agrawal rapid tooling presentation
prakash agrawal rapid tooling presentation
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
 
Rapid prototyping and tooling
Rapid prototyping and toolingRapid prototyping and tooling
Rapid prototyping and tooling
 
Selective Laser Melting versus Electron Beam Melting
Selective Laser Melting versus Electron Beam MeltingSelective Laser Melting versus Electron Beam Melting
Selective Laser Melting versus Electron Beam Melting
 
3D Printing Technology & Its Applications
3D Printing Technology & Its Applications3D Printing Technology & Its Applications
3D Printing Technology & Its Applications
 
Laminated object manufacturing
Laminated object manufacturingLaminated object manufacturing
Laminated object manufacturing
 
FDM FUSED DEPOSITION MODELLING
FDM FUSED DEPOSITION MODELLINGFDM FUSED DEPOSITION MODELLING
FDM FUSED DEPOSITION MODELLING
 
rapid prototyping
rapid prototypingrapid prototyping
rapid prototyping
 
Selective laser sintering
Selective laser sinteringSelective laser sintering
Selective laser sintering
 
Rapid tooling (rt)
Rapid tooling (rt)Rapid tooling (rt)
Rapid tooling (rt)
 
Additive manufacturing
Additive manufacturingAdditive manufacturing
Additive manufacturing
 
RAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdateRAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdate
 
Laminated object manufacturing
Laminated object manufacturing Laminated object manufacturing
Laminated object manufacturing
 
3dprintingppt 131210062711-phpapp02
3dprintingppt 131210062711-phpapp023dprintingppt 131210062711-phpapp02
3dprintingppt 131210062711-phpapp02
 
SELECTIVE LASER SINTERING
SELECTIVE LASER SINTERINGSELECTIVE LASER SINTERING
SELECTIVE LASER SINTERING
 
Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)
 
Stereolithography latest
Stereolithography latestStereolithography latest
Stereolithography latest
 

Andere mochten auch

Heat Exchangers
Heat ExchangersHeat Exchangers
Heat Exchangers
SABIC
 
Visualising the User Experience
Visualising the User ExperienceVisualising the User Experience
Visualising the User Experience
Grant Robinson
 
Concurrent Engineering
Concurrent EngineeringConcurrent Engineering
Concurrent Engineering
ajithsrc
 
Intellectual Property Rights
Intellectual Property RightsIntellectual Property Rights
Intellectual Property Rights
harshhanu
 

Andere mochten auch (20)

TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESSTYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
 
Rapid Prototyping and its Applications
Rapid Prototyping and its ApplicationsRapid Prototyping and its Applications
Rapid Prototyping and its Applications
 
Optical Encoder
Optical EncoderOptical Encoder
Optical Encoder
 
Heat exchanger
Heat exchanger Heat exchanger
Heat exchanger
 
Brazing and soldering
Brazing and soldering Brazing and soldering
Brazing and soldering
 
Rapid prototyping technology
Rapid prototyping technologyRapid prototyping technology
Rapid prototyping technology
 
Rapid Prototyping
Rapid PrototypingRapid Prototyping
Rapid Prototyping
 
Soldering and brazing
Soldering and brazingSoldering and brazing
Soldering and brazing
 
Investment casting
Investment castingInvestment casting
Investment casting
 
HEAT EXCHANGERS
HEAT EXCHANGERSHEAT EXCHANGERS
HEAT EXCHANGERS
 
Flexible manufacturing system(FMS).
Flexible manufacturing system(FMS).Flexible manufacturing system(FMS).
Flexible manufacturing system(FMS).
 
Investment Casting ppt
Investment Casting pptInvestment Casting ppt
Investment Casting ppt
 
Heat Exchangers
Heat ExchangersHeat Exchangers
Heat Exchangers
 
Visualising the User Experience
Visualising the User ExperienceVisualising the User Experience
Visualising the User Experience
 
Concurrent Engineering
Concurrent EngineeringConcurrent Engineering
Concurrent Engineering
 
Reverse engineering
Reverse engineeringReverse engineering
Reverse engineering
 
Creativity & Innovation
Creativity & InnovationCreativity & Innovation
Creativity & Innovation
 
Product Design & Development - 1
Product Design & Development - 1Product Design & Development - 1
Product Design & Development - 1
 
Intellectual Property Rights
Intellectual Property RightsIntellectual Property Rights
Intellectual Property Rights
 
Product design concept
Product design conceptProduct design concept
Product design concept
 

Ähnlich wie Rapid prototyping seminar

Overview of Rapid Prototyping
Overview of Rapid PrototypingOverview of Rapid Prototyping
Overview of Rapid Prototyping
Suhaimi Alhakimi
 
10-10-05_04 Dan Larochelle: Rapid prototyping
10-10-05_04 Dan Larochelle: Rapid prototyping10-10-05_04 Dan Larochelle: Rapid prototyping
10-10-05_04 Dan Larochelle: Rapid prototyping
Darrell Caron
 

Ähnlich wie Rapid prototyping seminar (20)

Rapid-prototyping
Rapid-prototypingRapid-prototyping
Rapid-prototyping
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
 
RPT- ppt.pdf
RPT- ppt.pdfRPT- ppt.pdf
RPT- ppt.pdf
 
Overview of Rapid Prototyping
Overview of Rapid PrototypingOverview of Rapid Prototyping
Overview of Rapid Prototyping
 
rapid prototyping -v1
rapid prototyping -v1rapid prototyping -v1
rapid prototyping -v1
 
Report on additive manufacturing, 3-D Printing and Rapid prototyping
Report on additive manufacturing, 3-D Printing and Rapid prototypingReport on additive manufacturing, 3-D Printing and Rapid prototyping
Report on additive manufacturing, 3-D Printing and Rapid prototyping
 
Design Development Experimental Approach of Industrial Product Enhancement Pr...
Design Development Experimental Approach of Industrial Product Enhancement Pr...Design Development Experimental Approach of Industrial Product Enhancement Pr...
Design Development Experimental Approach of Industrial Product Enhancement Pr...
 
report rp
report rp report rp
report rp
 
Rapid prototyping/ 3D Printing
Rapid prototyping/ 3D PrintingRapid prototyping/ 3D Printing
Rapid prototyping/ 3D Printing
 
Final_Chapter 6_MP.pptx
Final_Chapter 6_MP.pptxFinal_Chapter 6_MP.pptx
Final_Chapter 6_MP.pptx
 
rapid prototyping ppt.pptx
rapid prototyping ppt.pptxrapid prototyping ppt.pptx
rapid prototyping ppt.pptx
 
Sohan rapid prototyping.ppt.x
Sohan rapid prototyping.ppt.xSohan rapid prototyping.ppt.x
Sohan rapid prototyping.ppt.x
 
report on stereoithographty
report on stereoithographtyreport on stereoithographty
report on stereoithographty
 
10-10-05_04 Dan Larochelle: Rapid prototyping
10-10-05_04 Dan Larochelle: Rapid prototyping10-10-05_04 Dan Larochelle: Rapid prototyping
10-10-05_04 Dan Larochelle: Rapid prototyping
 
180180708010 - RAPID PROTOTYPING
180180708010 - RAPID PROTOTYPING180180708010 - RAPID PROTOTYPING
180180708010 - RAPID PROTOTYPING
 
3 d printingprocessin fdmprocess trc.pptx
3 d printingprocessin fdmprocess trc.pptx3 d printingprocessin fdmprocess trc.pptx
3 d printingprocessin fdmprocess trc.pptx
 
Rapid prototyping.pptx
Rapid prototyping.pptxRapid prototyping.pptx
Rapid prototyping.pptx
 
3d printing
3d printing3d printing
3d printing
 
Rapid Prototyping lpu mechanical engineering.pptx
Rapid Prototyping lpu mechanical engineering.pptxRapid Prototyping lpu mechanical engineering.pptx
Rapid Prototyping lpu mechanical engineering.pptx
 
3 d printing ppt
3 d printing ppt3 d printing ppt
3 d printing ppt
 

Kürzlich hochgeladen

How we scaled to 80K users by doing nothing!.pdf
How we scaled to 80K users by doing nothing!.pdfHow we scaled to 80K users by doing nothing!.pdf
How we scaled to 80K users by doing nothing!.pdf
Srushith Repakula
 
Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...
Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...
Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...
panagenda
 
TopCryptoSupers 12thReport OrionX May2024
TopCryptoSupers 12thReport OrionX May2024TopCryptoSupers 12thReport OrionX May2024
TopCryptoSupers 12thReport OrionX May2024
Stephen Perrenod
 
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo DiehlFuture Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Peter Udo Diehl
 
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
CzechDreamin
 
A Business-Centric Approach to Design System Strategy
A Business-Centric Approach to Design System StrategyA Business-Centric Approach to Design System Strategy
A Business-Centric Approach to Design System Strategy
UXDXConf
 
Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...
Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...
Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...
CzechDreamin
 

Kürzlich hochgeladen (20)

Oauth 2.0 Introduction and Flows with MuleSoft
Oauth 2.0 Introduction and Flows with MuleSoftOauth 2.0 Introduction and Flows with MuleSoft
Oauth 2.0 Introduction and Flows with MuleSoft
 
How we scaled to 80K users by doing nothing!.pdf
How we scaled to 80K users by doing nothing!.pdfHow we scaled to 80K users by doing nothing!.pdf
How we scaled to 80K users by doing nothing!.pdf
 
Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...
Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...
Easier, Faster, and More Powerful – Alles Neu macht der Mai -Wir durchleuchte...
 
TopCryptoSupers 12thReport OrionX May2024
TopCryptoSupers 12thReport OrionX May2024TopCryptoSupers 12thReport OrionX May2024
TopCryptoSupers 12thReport OrionX May2024
 
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo DiehlFuture Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
 
PLAI - Acceleration Program for Generative A.I. Startups
PLAI - Acceleration Program for Generative A.I. StartupsPLAI - Acceleration Program for Generative A.I. Startups
PLAI - Acceleration Program for Generative A.I. Startups
 
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
 
ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...
ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...
ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...
 
Using IESVE for Room Loads Analysis - UK & Ireland
Using IESVE for Room Loads Analysis - UK & IrelandUsing IESVE for Room Loads Analysis - UK & Ireland
Using IESVE for Room Loads Analysis - UK & Ireland
 
WebAssembly is Key to Better LLM Performance
WebAssembly is Key to Better LLM PerformanceWebAssembly is Key to Better LLM Performance
WebAssembly is Key to Better LLM Performance
 
WSO2CONMay2024OpenSourceConferenceDebrief.pptx
WSO2CONMay2024OpenSourceConferenceDebrief.pptxWSO2CONMay2024OpenSourceConferenceDebrief.pptx
WSO2CONMay2024OpenSourceConferenceDebrief.pptx
 
How Red Hat Uses FDO in Device Lifecycle _ Costin and Vitaliy at Red Hat.pdf
How Red Hat Uses FDO in Device Lifecycle _ Costin and Vitaliy at Red Hat.pdfHow Red Hat Uses FDO in Device Lifecycle _ Costin and Vitaliy at Red Hat.pdf
How Red Hat Uses FDO in Device Lifecycle _ Costin and Vitaliy at Red Hat.pdf
 
What's New in Teams Calling, Meetings and Devices April 2024
What's New in Teams Calling, Meetings and Devices April 2024What's New in Teams Calling, Meetings and Devices April 2024
What's New in Teams Calling, Meetings and Devices April 2024
 
Powerful Start- the Key to Project Success, Barbara Laskowska
Powerful Start- the Key to Project Success, Barbara LaskowskaPowerful Start- the Key to Project Success, Barbara Laskowska
Powerful Start- the Key to Project Success, Barbara Laskowska
 
Intro in Product Management - Коротко про професію продакт менеджера
Intro in Product Management - Коротко про професію продакт менеджераIntro in Product Management - Коротко про професію продакт менеджера
Intro in Product Management - Коротко про професію продакт менеджера
 
A Business-Centric Approach to Design System Strategy
A Business-Centric Approach to Design System StrategyA Business-Centric Approach to Design System Strategy
A Business-Centric Approach to Design System Strategy
 
AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101
 
Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...
Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...
Behind the Scenes From the Manager's Chair: Decoding the Secrets of Successfu...
 
Enterprise Knowledge Graphs - Data Summit 2024
Enterprise Knowledge Graphs - Data Summit 2024Enterprise Knowledge Graphs - Data Summit 2024
Enterprise Knowledge Graphs - Data Summit 2024
 
Speed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in MinutesSpeed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in Minutes
 

Rapid prototyping seminar

  • 1. UNDER GUIDANCE OF 1. Dr. Israr Equbal Department of Manufacturing Engg., NIFFT, HATIA SUBMITTED BY Abhishek Raj B. Tech(Vth sem) Mechanical Engg. (2009-13) RTC INSTITUTE OF TECHNOLOGY ANANDI , RANCHI- 834 003
  • 2.
  • 3.
  • 4.
  • 5.
  • 6.
  • 7.
  • 8.
  • 9.
  • 11.
  • 12. PT CAM uses a stereolithography machine produced by 3-D Systems and shown here: The Stereolithography Machine
  • 13.
  • 14.  
  • 15.
  • 16.
  • 17.
  • 18.
  • 19.
  • 20.
  • 21.
  • 22.
  • 23.
  • 24.  
  • 25.
  • 26.