1. JOB TITLE: AUTOMOTIVE TECHNICIAN 1
DUTY NO.: 01 DUTY: PERFORM WORKSHOP PRACTICE
TASK NO.: 01.02 TASK: Carry out bench fitting activities
LEVEL: 1 PERFORMANCE STANDARD: (Actions, Conditions, Criteria)
Carry out bench fitting activities using workshop equipment, hand tools,
bench fitting tools, measuring tools, material for fitting work, technical
drawing equipment, and project blue print so that type of metal required
ensured and cut; reference edge conducted; work piece layout marked,
drilled, tapped, and filed are in accordance with the requirements of the
project blue print.
SUB-TASKS/STEPS
ENABLING REQUIREMENTS
(Knowledge, Skill, Attitude and Safety)
TOOLS/EQUIPMENT/
MATERIALS
1. Ensure types of
metal required
2. Conduct material
cutting
3. Conduct metal
reference edge
Knowledge on:
1.1 Types of metal
Ability to:
1.1 Describe types of metal
1.2 Identify types of metal
Knowledge on:
3.1 Types of cutting tools
3.2 Techniques of using cutting tools
3.3 Procedures of metal cutting
3.4 Methods of metal cutting
Ability to:
3.1 Select correct cutting tools
3.2 Set cutting tools
3.3 Cut material work piece
Knowledge on:
3.1 Reference edge
3.2 Types of measuring tool
3.3 Types of file
3.4 Techniques of metal filing to make
reference edge
Ability to:
3.1 Interpret reference edge
3.2 Apply measuring tool
3.3 File metal to acquired reference edge
1. bench fitting
equipment
2. hand tools
3. bench fitting tools
4. measuring tools
5. material for fitting work
6. technical drawing
equipment
7. workshop equipment
8. project blue print
9. personal protection
equipment
10. first aid kit

2. 4. Conduct layout and
marking work piece
5. Conduct metal
drilling and tapping
6. Conduct metal
surface filing
Knowledge on:
4.1 Basic technical drawing
4.2 Basic blue print
4.3 Methods of laying out work piece
4.4 Measuring and marking tools operation
4.5 Marking work piece according to technical
drawing
Ability to:
4.1 Interpret technical drawing
4.2 Interpret blue print
4.3 Lay out work piece
4.4 Operate measuring and marking tools
4.5 Mark work piece
Knowledge on:
5.1 Types of drill bit, reamer and tapping tools
5.2 Techniques of drilling, reaming, and
tapping
Ability to:
5.1 Select drill bit, reamer, and tapping tools
5.2 Drill, ream, and tap work piece
Knowledge on:
6.1 Types of file
6.2 Types of measuring equipment
6.3 Techniques of filing
Ability to:
6.1 Select correct file
6.2 File work piece according to blue print
6.3 Measure work piece according to blue
print
Attitude/Safety:
· Wear personal protection equipment
· Handle equipment and tools with care