1. commercial systems
Intelligent systems engineered
to save time and resources.
That’s Uponor Logic at work.

2. TAbLE Of COnTEnTS
Uponor Commercial Systems .................................................1 Permafrost Prevention ............................................................19
PEX Plumbing Systems ...............................................................5 Turf Conditioning ........................................................................ 20
Radiant Heating and Cooling ................................................9 Pre-insulated Pipe Systems ................................................21 Project: the center for Water education and Western center
for archaeology and Paleontology
Snow and Ice Melting ...............................................................17 Innovation, Training and Support .................................. 23 Location: Hemet, california
System: radiant Heating and cooling
Product: 60,000 square feet 5/8quot; Uponor hePeX ™ plus
Chief Architect: tubing
General Contractor: lehrer architects
Consulting Engineer: lehrer + Gangi Design + Build
LEED Rating: iBe consulting engineers
The invisible revolution in commercial building Platinum
An introduction to Uponor by Jan Lång, CEO, Uponor
People marvel at the beauty of a bold architectural design or stunning interior. But some of the most impressive
features of modern commercial structures are all but invisible to the naked eye:
— Quiet, reliable plumbing systems that deliver pure water on demand
— energy-efficient radiant heating and cooling systems that create a new kind of interior comfort
— Pre-insulated pipe that maintains fluid temperatures in the most demanding conditions
— Heating systems embedded in concrete or under pavement that eliminate snow and ice without
plows or harsh chemicals
— turf conditioning systems that let grass grow in the middle of winter
Uponor continues to set the industry standard for plumbing and radiant heating and cooling products. Using
technology proven and implemented around the world, these systems preserve natural resources and use energy
more efficiently. We’re committed to offering unprecedented advantages to engineers, architects, general
contractors, mechanical contractors, installers, developers and owners. Ultimately, our products and services enrich
the lives of people around the world.
in the following pages, you’ll find numerous compelling examples of Uponor leadership that yields impressive
dividends at the job site, in finished structures and on the bottom line. everyone at Uponor is ready to help you
select, install and enjoy the benefits of our products. We look forward to working with you.
Uponor maintains a global presence that
reflects the worldwide use of our products:
1620 Wirsbo company founded 1970 Wirsbo introduces 1988 Uponor acquires Wirsbo Today Uponor PeX systems
in Virsbo, sweden PeX-a to market and is listed on the sold in 100 countries — corporate Headquarters: Helsinki, Finland
Helsinki stock exchange worldwide
— North american Headquarters:
apple Valley, minnesota (Usa)
— North american manufacturing Facilities:
apple Valley, minnesota (Usa) and saint John,
New Brunswick (canada)
— North american Distribution: Burnsville,
1968 PeX-a invented 1984 Wirsbo opens North 2006 Wirsbo Uponor
american headquarters changes name to minnesota (Usa), regina, saskatchewan
in United states Uponor
(canada), Brampton, ontario (canada)
COMMERCIAL SYSTEMS COMMERCIAL SYSTEMS
1 2

3. Unconventional thinking yields
innovative solutions
there’s a simple but often overlooked truth about innovation: if you do
things the way that everyone else does, you’ll get the same results they
do. and that’s where Uponor logic comes in. in it’s simplest form it means
we’re always looking for a better way. and you’ll find evidence of it in every
facet of our business:
— Quality products proven by decades of testing
— Partnerships with the people who use and benefit from our products
— custom installation plans that increase efficiency, optimize system
performance and reduce liability
— training and support services that let you install our products with
confidence and ensure reliable performance
Uponor logic isn’t just a tagline or an advertising slogan — it’s a way of
doing business that gives you a competitive edge, enhances the value of
your projects and increased your profits.
Sustainability: It’s just another
word for thinking ahead not just better products — a better way to build
individually, Uponor systems offer an impressive list Project: Hunter museum of american art
While sustainability has become a popular topic for corporations to talk Location: chattanooga, tennessee
of benefits for commercial applications. collectively, System:
about, we don’t see it as a trend. We see it as a core business practice. our radiant Heating and cooling
Product: 6,000 square feet 1/2quot;
they represent a new level of efficiency, reliability
commitment to sustainable building includes the ongoing development of Uponor hePeX ™ plus tubing
and performance that helps you build structures with Chief Architect: randall stout, Faia
new materials and methods that reduce negative environmental impact. Associate Architects: Derthick, Henley & Wilkerson
enhanced value and minimized liability: General Contractor: emJ corporation
Mechanical Engineer: march adams & associates
— systems that use less energy, reduce resource demand — efficient product transportation and delivery Mechanical Contractor: acs services
— integrated plumbing, heating and cooling systems
and perform reliably for years systems that reduce fossil fuel consumption
— Faster, more efficient installations
— efficient installation plans that ensure efficient — manufacturing processes that conserve energy,
material use and minimize construction waste minimize waste and convert raw material waste — stronger, more durable materials
through recycling or energy use
— Product designs that incorporate environmentally — increased mechanical and workforce productivity
responsible materials and avoid potential contaminants
— reduced material costs
— more energy-efficient systems
— Power source flexibility
— reduced liability
COMMERCIAL SYSTEMS COMMERCIAL SYSTEMS
3 4

4. PEX Plumbing Systems:
The new global standard
PEX-a tubing connects you to flexibility, efficiency and reliability
Project: sovereign
Uponor PeX-a tubing is at the core of all our systems, from plumbing,
Location: atlanta, Buckhead, Georgia
System: heating and cooling to snow and ice melting and turf conditioning. PeX-a
PeX-a Plumbing system
Product: Uponor aQUaPeX tubing and ProPeX Fitting
features the highest degree of crosslinking available for added flexibility
Chief Architect: smallwood, reynolds, stewart, stewart
General Contractor: Hardin construction Group
and durability, enabling installation plans that maximize efficiency in time
Mechanical Contractor & Engineer: mcKenney mechanical
and materials and minimize costs.
Uponor pioneered the development of PeX tubing and led the way in
developing new regulatory codes and standards for the industry, including
the astm F876 and F877 standards. our PeX products are backed by
35 years of proven performance and a rigorous system of quality checks
and controls that make PeX-a the most thoroughly tested PeX tubing
in history. since 1973, Uponor has held the world record for long-term
elevated temperature and pressure testing at 203°F and 175 psi.
today, Uponor manufactures one-third of all PeX tubing sold in North
america. over 12 billion feet of Uponor PeX tubing has been installed
worldwide. and Uponor offers 25-year limited warranty on PeX tubing
when installed by an Uponor-trained professional.
supply line
Hot Water re-circulation line
Pressure-reducing Valve
“ The use of Uponor PEX-a Plumbing
System on the Sovereign Project
proved to be ultra efficient. We
have the peace of mind that we Water
installed a highly reliable system Distribution
ProPeX
that will perform very well for our multi-port tee
client. In addition to our highly
skilled staff, we feel that Uponor
Systems makes us more competitive
and is in line with the top quality
solutions we provide for our
customers.” High-rise Application (gravity fed system) In-slab Application
Uponor offers innovative applications and designs Using Uponor Pre-sleeved Uponor aQUaPeX tubing
to help you maximize the value and performance for in-slab applications lets you install and bill earlier
of our products. this design uses a cost-effective and eliminates scheduling headaches and trade
Matt Terek and efficient PeX-a Plumbing system in a gravity coordination. it can also be easily replaced in the
Vice President fed configuration for high-rise water distribution. unlikely event that it is damaged after installation.
McKenney’s, Inc.
PEX PLUMbInG SYSTEMS PEX PLUMbInG SYSTEMS
5 6

5. PEX-a tubing and ProPEX fittings:
An unbeatable combination
Uponor PeX tubing is clean, non-toxic and extremely durable. ProPeX is arguably the best fitting system the
industry has to offer. together, they create a system in which connections require no glues, solvents or flux
for installation, resist leaks, and lasts for decades.
ProPEX fittings:
PEX-a tubing:
— the most proven fitting system on the market
— Features a life expectancy of more than 100 years
— Provide 100% visible connections and eliminate
— resists freezing better than any other tubing Overhead Plumbing Application
in this overhead plumbing application,
dry fit concerns, making it easy for installers to do
on the market Uponor aQUaPeX® tubing, multi-port
tees and manifolds dramatically reduce
the job right the first time the number of fittings required for an
— Withstands potential oxidative effects of heavily installation, saving time and labor costs
while reducing liability and risk.
— made with yellow brass and the industry’s thickest
chlorinated water
fitting walls for durable, reliable installations
— Features low thermal transfer, making it virtually
— also available in red brass and engineered plastic
sweat-free in most environments
(eP) for performance and reliability in more
— allows installers to make secure connections
aggressive water conditions
without glues, solvents or torches, thanks
— Unique design with large internal diameter (iD)
to thermal and elastic shape memory
provides flow characteristics superior to other PeX
— lightweight and flexible, with the tightest
fitting systems
bend radius available to reduce kinking and enable
— eP multi-port tees provide design and performance
quicker installations with fewer fittings
optimization
— installs in all weather conditions and performs
Go to the “For Professionals” section at
reliably without cracking, leaking or losing its shape Large Dimension Uponor AQUAPEX
the use of cost-effective large
www.uponor-usa.com for complete code and standard dimension Uponor aQUaPeX tubing,
— Provides better water quality than metal pipe or cPVc labor-saving PeX expansion Joint Kits
listings for all Uponor plumbing products. and reliable ProPeX fittings provide
systems, with no caustic solvents, cement or solder the ultimate solution for long run
vertical and horizontal installations.
— Virtually eliminates water transfer noise: tests show
up to 65% less noise than copper
— available in sizes of up to 2quot; for use in vertical
risers and horizontal trunk lines, as well as water
service applications
PEX-a tubing vs. CPVC and Copper
2
3 Uponor PeX-a, chlorinated polyvinyl chloride (cPVc) and copper are all used
in plumbing systems. But the similarities end there. PeX-a is more flexible,
more reliable, easier to install and longer lasting than either cPVc or copper.
Uponor PeX plumbing systems feature
(1) Uponor aQUaPeX tubing in sizes
ranging from ¼quot; to 2quot;, (2) expansion
Joint Kit, (3) eP multi-port tees and
(4) pre-sleeved tubing.
features PEX CPVC Copper
torches, glues, solvents and gauges necessary No yes yes
Visual connection yes No No
1
Flexible for a tight bend radius yes No No
4 rain and high humidity affect install conditions No yes yes
Quick and simple fitting connections yes No No
Dry-fit connections No yes yes
air testing recommended yes No yes
PEX PLUMbInG SYSTEMS PEX PLUMbInG SYSTEMS
7 8

6. Radiant Heating and Cooling:
Radiant systems Radiant Heating and Cooling Applications
and energy savings
— High-rise hotels — malls and shopping
Creating comfortable centers
a radiant heating and cooling
— office buildings
environments
system can make a commercial
— industrial warehouses
— Gymnasiums and
structure more energy-efficient
recreational facilities — Government centers
— even when it’s paired with a
Energy-efficiency and cost savings, just below the surface
traditional HVac system. Here
— aircraft hangars — Nursing homes
are six ways that radiant systems creating a comfortable environment in commercial structures is a critical
— Distribution centers — childcare facilities
conserve energy and save money: design and construction consideration. comfortable employees are more
productive and comfortable customers are more relaxed, contributing to — car dealerships — Dormitories and school
1. radiant systems are based on the
the success of a business. radiant heating and cooling are fast becoming buildings
principle of low-temperature heating
— Warehouse/big-box
the global standard for creating comfortable environments. and Uponor,
and high-temperature cooling. this
retail locations — military facilities
already the undisputed leader in radiant heating, is leading the way in
is also known as low-exergy
radiant cooling for commercial structures. — airports — correctional institutions
design, meaning a system that
creates greater output using
— Hospitals and — museums
radiant heating and cooling both take advantage of the energy
less energy. the efficient energy
healthcare facilities
storage capacity of concrete floors for heating and cooling a commercial — churches
conversion of a radiant system
structure. in radiant heating, energy moves away from the heated surface,
results in an overall decrease in
— stadiums and arenas
surrounding people with warmth. in radiant cooling, the opposite occurs,
co2 emissions for commercial
with energy moving toward the cooled surface, lowering the air temperature.
structures.
Uponor offers you the ability to combine both systems in a single installation,
2. radiant heating and cooling are allowing you to use the system year-round as weather conditions, seasons
passive systems designed to run and climates dictate.
primarily during periods when
a building is unoccupied. this A solution for every type of building
conserves energy by reducing
Whether your project involves new construction or renovation, Uponor
the load on traditional HVac
radiant systems offer unique advantages — including the ability to work
systems, and allows you to take
with existing HVac systems to conserve energy during peak operating
advantage of off-peak energy
hours. (see “radiant systems and energy savings” sidebar.) radiant
rates for lower operating costs.
systems give you the ability to accurately control and vary temperatures
3. the water in a radiant system in individual rooms, areas or zones throughout a structure. Quieter than
has a capacity to transport energy forced-air systems, they ensure indoor air quality by minimizing the
3,500 times greater than air, potential for bacteria and mold and preventing dust and allergens from
so it can heat and cool using less circulating through the air. and no matter which installation method you
energy than a forced-air system. choose, radiant systems save floor space by eliminating the need to install
mechanical equipment in the conditioned area.
4. in radiant systems, fans are typically
only needed for ventilation and
humidity control. this can reduce
needed air movement volume
and mechanical equipment size
by up to five times, and also
reduce fan power and duct size.
5. radiant systems are easily
integrated with alternative
energy sources, such as
geothermal, solar, waste and
free sources of energy such
as biomass.
6. radiant systems can help your
building earn leeD™ points for
reduced energy consumption.
RADIAnT HEATInG AnD COOLInG SYSTEMS RADIAnT HEATInG AnD COOLInG SYSTEMS
9 10

7. “ The Academy’s main level is a
bare-box, high-ceiling space with
glass exterior walls, making it an ideal
application for radiant. The system
Radiant system installation options
keeps the heating or cooling near
radiant systems are configured in one of two basic ways: High mass systems incorporate the mass the floor where the people are, not
of the building in cooling, with tubing embedded in structural concrete. low mass systems use tubing blowing around the ceiling, as with
embedded in surface-mounted ceiling, floor or wall panels. typically, the same panels are used for a conventional forced-air system.”
heating and cooling functions. the installation options for high and low mass systems are as follows:
Paul Switenki,
Project Engineer,
High mass:
Arup
on-grade with expansion joint concrete on metal decking
slab-on-slab over high density insulation
concrete on pre-stressed decking
Project: california academy of science
Location: san Francisco, california
System: radiant Heating and cooling
Product: 53,000 square feet 5/8quot; Uponor hePeX ™ plus tubing
Chief Architect: renzo Piano
Low mass: Associate Architects: chong + Partners
General Contractor: Webcor
Consulting Engineer: arup & Partners
LEED Rating: Platinum
radiant ceiling with Uponor
Climate Control network System
˘
aluminum Heat emission Plates
one control platform integrates heating, cooling, ventilation and water distribution to
Qwik track ® Panels wall application
provide complete functionality with remote access, efficient installation and simple setup.
— integrates hydronic, air and indoor supports:
air-quality functions
— 99 hydronic zones
— communicating network platform
— 16 air zones
— remote and web access
— 12 digital zone control modules — 5 water temperatures
— touch panel interface
— 8 air handlers/furnaces/ac units — 5 boilers
— cat5 cabling for easy installation
— 8 heat recovery ventilation — 4 snow-melting zones
Poured floor underlayment Qwik track ® Panels over wood subfloor
— Flexible and powerful units (HrVs)
RADIAnT HEATInG AnD COOLInG SYSTEMS RADIAnT HEATInG AnD COOLInG SYSTEMS
11 12

8. “ The radiant floor works exceptionally well in that it both
heats and cools. Having a 10-story atrium is quite dramatic
Radiant Cooling Systems but making it comfortable at all times is equally as important,
and we’ve been successful at achieving that.” 1
radiant cooling is a comfortable, quiet, energy-efficient alternative to traditional air conditioning in commercial
brian Schwagerl, Vice President of Real Estate
buildings. a passive system, it uses off-peak electric power at night, reducing the need for energy-intensive HVac air
and facilities, Hearst Corp.
conditioning during the day and giving you the ability to downsize chillers and eliminate individual air-conditioning
units. radiant cooling eliminates the drafts and temperature fluctuations common in traditional HVac systems,
and is especially effective in high-glazing areas where solar gain is a concern. it also avoids problems with mold and
allergens spread by forced-air systems, making it an ideal choice for hospital and healthcare environments.
— energy savings from radiant cooling systems range — allows you to establish a centralized location for the
on average from 17% in cold, humid climates to control system and mechanical equipment, simplifying
42% in warm, dry climates installation, operation and maintenance
— Particularly effective for building designs — systems can be designed to transfer heat away from
incorporating large glass surfaces that carry one area of a building to another when needed
high direct solar loads
Su
n
be
am
Radiant cooling: focus the cooling
effect at the occupant level
radiant cooling capacity averages 12-14 Btu/h/ft 2;
when used in areas with high solar gain potential,
it increases to 25-32 Btu/h/ft 2.
Project: Hearst tower
Location: New york, New york
System: radiant Heating and cooling
Product: 150,000 square feet 5/8quot; Uponor hePeX plus tubing
Chief Architect: Foster + Partners
Associate Architects: adamson associates
General Contractor: turner construction corp
Consulting Engineer: Flack + Kurtz
LEED Rating: Gold
“owner is radiant about lobby’s radiant cooling,” engineering News record, issue 12, Volume 259, page 15.
1
RADIAnT HEATInG AnD COOLInG SYSTEMS RADIAnT HEATInG AnD COOLInG SYSTEMS
13 14

9. Radiant Heating Systems
forced-Air Radiant
radiant floor heating has a history that dates back 2,000 years to ancient rome and Korea. Frank lloyd Wright Radiant heating: Energy and comfort comparison
95ºf
pioneered the modern version, encasing pipe in concrete slabs. today, radiant heating is the standard used 60ºf 60ºf 60ºf
low temperature heating: radiant heating provides
85ºf
throughout europe and increasingly in other parts of the world. Because radiant heating employs a much larger
greater thermal comfort at a lower set point than
79ºf
heating surface than forced-air systems, a lower temperature achieves the same level of heat transfer, allowing
forced-air heat.
100ºf
lower overall thermostat settings. 65ºf 65ºf 65ºf
68ºf
— energy savings can range from 20-40% over — creates a more comfortable and aesthetically 110ºf 59ºf
traditional systems pleasing environment, without unsightly ductwork 81ºf 81ºf 81ºf
— installs in both ground floors and upper levels — concealed installation is ideal for public areas where
of commercial structures hot or sharp, exposed surfaces could be dangerous
— Works with concrete or wood floors and all types — one system provides heating and cooling — in some
of floor coverings, including stone, tile, wood, climates, it may perform both tasks throughout the day
vinyl and carpet
Project: akron art museum
Location: akron, ohio
System: radiant Heating and cooling
Product: 45,000 square feet
5/8quot; Uponor hePeX ™ plus tubing
Chief Architect: co-op Himmelb(1)au ohio
Associate Architects: Westlake reed leskosky
General Contractor: Welty Building company
Consulting Engineer: iBe consulting
RADIAnT HEATInG AnD COOLInG SYSTEMS RADIAnT HEATInG AnD COOLInG SYSTEMS
15 16

10. Project: Beaver creek
Location: Vail, colorado
Case Study: beaver Creek
Beaver creek, a luxurious ski resort located near Vail,
colorado receives an average of 330 inches of snow
annually. snow removal was a nuisance and a liability issue.
Beaver creek installed an Uponor snow and ice melting
system, ensuring convenience and safety for its visitors.
the system covers 80,000 square feet of walkways and
driveways including resort hotels, condos, restaurants,
Snow and Ice Melting: Put waste energy upscale retail stores, and a year-round, outdoor ice-
to use and put away the shovel skating rink. Visitors now enjoy walking safely on the
snow- and ice-free stairs, hotel and store entrances.
the snow and ice melting system also ensures safe
Uponor commercial snow and ice melting systems offer a safe, convenient, energy-efficient conditions in the parking ramps and loading docks.
and affordable alternative for snow and ice removal. Durable Uponor PeX-a tubing buried in
concrete, asphalt or sand circulates a warm water-glycol solution to heat the surface and melt Uponor’s snow and ice melting system eliminates
ice and snow, eliminating the need for shoveling, salting and sanding. maintenance costs associated with the traditional snow
removal methods as well as the associated noise and
an Uponor snow and ice melting system is surprisingly affordable way to perform a critical task for traffic issues. Jerry Hensel, manager of operations for
commercial structures, and can be paired with alternative energy sources to operate nearly cost-free. the Beaver creek resort company, is pleased with the
results. “it’s just wonderful,” he says. “it’s relatively
maintenance-free and the appearance is just amazing.”
— Helps you comply with americans with Disabilities
act (aDa) regulations and reduces liability
Snow and — extends the life of paved surfaces
Ice Melting
— conserves gas and prevents pollution by eliminating
Applications
the need for snow blowers and plows
— ski resorts Case Study: Westin Hotel
— Keeps interior floors cleaner by eliminating snow and
— Wheelchair access Built on the last remaining mountainside site on Whistler
ice that gets tracked inside
ramps mountain in Whistler, British columbia, the Westin resort
— lets you take advantage of alternative heat sources and spa affords coveted ski-in and ski-out convenience to
— Hospital such as biomass, geothermal or waste heat from two world-class ski mountains. With the installation of the
emergency within a structure for virtually cost-free operation outdoor hot tub in an area where daily snowfall can reach
entrances
up to three inches, the Westin was challenged to keep the
— Driveways pool deck free of snow and ice during winter use.
— Parking lots,
traditional methods of snow removal, such as shoveling
garages and
and salting, would be costly, messy and labor-intensive.
ramps
But Uponor offered a superior alternative with their snow-
— Hotels melting system. the warmth from the water circulating
beneath the pool deck warmed it to a temperature that
— Helipads
melted snow and ice on contact.
— streets and
sidewalks according to chris turcott, Vice President of cressey
Development corporation, “the Uponor snow-melting
— loading docks
system was simple, reliable and offered ease of installation.
and shipping areas
Using a snow-melting system alleviates potential liability
— airport hangars concerns for hotel owners when there is no snow or ice
for hotel visitors to slip on.”
Go to www.uponor-usa.com/commercialcs for more Project: Westin resort and spa
snow and ice melting installation:
Location: Whistler, British columbia
slab-on-grade over high-density insulation information on this and other case studies.
SnOW AnD ICE MELTInG SYSTEMS SnOW AnD ICE MELTInG SYSTEMS
17 18

11. “ The field is warm and moist
enough that it can actually
grow grass in December or even
Permafrost Prevention: Subterranean January. The freezing point for
the glycol mixture is -25° f, so
protection against sub-zero temperatures the system can be filled with fluid
year-round, without the hassle
soil that freezes due to continued exposure to sub-freezing temperatures is called permafrost. and expense of draining and
the frozen soil results in expansion that can destroy the concrete floors in a freezer plant. re-filling it prior to each season.”
Permafrost prevention represents another creative problem-solving use of Uponor radiant
heating technology.
Chris bennett,
combining a radiant heating system with thick layers of insulation, the system contains frigid Senior Vice President,
temperatures inside the freezer structure while maintaining a continuous soil temperature to Althoff Industries
ensure a stable and reliable surface for the building’s foundation. you can even capture waste
heat from freezer machinery for a cost-effective and environmentally sound power source.
— Protects foundations against freezing damage, stress fractures, heaving and cracking
— Preserves the structural integrity of a building
Project: toyota Park
— ensures the safety of occupants and prevents costly foundation repairs Location: Bridgeview, illinois
System: turf conditioning
Product: 75,000 square feet ¾quot; Uponor hePeX ™ plus tubing
— Promotes durability and long life in sub-floors, even in severe climates Chief Architect: rosetti architects
General Contractor: sports construction Group
Mechanical Engineer: althoff industries, inc.
Turf Conditioning: Keep the
Project: Us army corps of engineers
Location: Fort mccoy, Wisconsin
grass greener all year long
System: Permafrost Prevention system
Product: 5/8quot; Uponor hePeX ™ plus tubing
Mechanical Engineer: Us army corps of engineers
Uponor was first to use PeX tubing for hydronic turf conditioning systems.
these systems are now used by the National Football league (NFl) and
in numerous soccer and other athletic stadiums in europe, canada and
Permafrost
the United states to preserve natural turf year-round. an Uponor turf
Prevention
conditioning system uses PeX-a tubing installed in the soil beneath the
applications
turf to maintain an optimum soil temperature for the root bulb of grass
plants. this promotes growth, faster recovery, a longer playing season and
— refrigerated
superior field conditions, which, in turn, protects athletes from serious
warehouses
injury in all climates and seasons.
— Freezer storage
facilities
— ice skating rinks
— coolers
— chill coolers
— Holding freezers
— Blast freezers
PERMAfROST PREVEnTIOn AnD TURf COnDITIOnInG SYSTEMS PERMAfROST PREVEnTIOn AnD TURf COnDITIOnInG SYSTEMS
19 20

12. Project: BmW-Welt
Location: munich, Germany
System: radiant Heating and cooling
Product: 25 x 2.3mm PeX-a pipes
Chief Architect: coop Himmelb(1)au
Associate Architect: Paul Kath
General Contractor: Kuehn Bauer Partner
Ecoflex commercial and remote Heat source
Pre-insulated Pipe Systems: industrial applications radiant Floor
Heating/cooling
— District heating systems
Protection from cold, heat and energy loss — Hot water systems
the Uponor Pre-insulated Pipe system uses ecoflex® piping to transfer hot and cold liquids within and between commercial and — Potable water systems
ecoflex
industrial structures. ecoflex piping incorporates PeX tubing surrounded by closed-cell foam insulation that retains thermal properties,
— transport of fluids
and a watertight outer jacket that protects against punctures and guards against moisture contamination. it can be installed directly
off the coil into the trench across a maximum span of 656 feet without joints. installing a Pre-insulated Pipe system simplifies — transport of select chemicals
installations and minimizes the risk of leaks and liability in challenging soil conditions and temperatures:
— Process water systems
snow and ice melting
— lightweight, durable and flexible, ecoflex — Helps ensure 100% material use and minimal — Biomass
pipe is easy to transport and install waste throughout the production chain
— Wood boilers
— ecoflex pipe bends around rocks, tree roots — corrosion-resistant and stands up to
and other obstructions that would require unstable soil conditions
an example of a radiant
additional connection time and materials Heating and cooling system in
— manufactured using recycled plastic which waste heat is captured for
with other products a snow and ice melting system.
PRE - InSULATED PIPE SYSTEMS PRE - InSULATED PIPE SYSTEMS
21 22

13. Systems you can build on,
support you can rely on
the advantages that Uponor brings to commercial structures begin with a comprehensive
offering of PeX plumbing and radiant heating and cooling systems. But because crucial decisions
are made long before the first blueprint is drawn, we support investors, developers, installers
and construction service providers from the earliest stages of a project with control-strategy
options and recommendations to maximize system performance and operating efficiency.
Innovation and testing that drive performance
Uponor pioneered the testing of PeX-a tubing and led the development of
the codes and standards used to regulate the PeX industry. the research and
product testing that goes into every Uponor system ensures superior quality,
installation efficiency and long-term reliability.
The industry’s top training programs
since 1993, more than 100,000 professionals have been certified through
our factory training courses and on-the-jobsite instruction. more than
1,000 professionals train in our manufacturing facilities every year. Uponor
also offers e-learning seminars and american institute of architects (aia)
webinars. throughout North america, our extensive network of Uponor
technicians, professional trainers and sales representatives make sure our
products are installed correctly, perform reliably and deliver the results that
you and your clients expect and deserve.
Design for form, function
and efficiency
Uponor maintains a full-service design
department to help you negotiate
the complexities of modern construction
techniques and code requirements.
We’ll create custom installation plans
for your project that ensure the most
efficient use of materials and maximize
system performance. our experienced Project: suvarnabhumi Bangkok airport
Location: Bangkok, thailand
designers are ready to help you specify System: radiant cooling
Product: 5/8quot; Uponor hePeX ™ plus tubing
and implement the best solution for your Chief Architect: murphy/Jahn architects
General Contractor:
challenge — including fast turnarounds italian-thai Development
Consulting Engineer: Dorsch consult, scott Wilson
on any necessary plan modifications. Kirkpatrick & Partners/transolar
call (888) 594-7726 or send an email to
technical.services@uponor-usa.com
to discuss your next project.
InnOVATIOn, TRAInInG AnD SUPPORT InnOVATIOn, TRAInInG AnD SUPPORT
23 24

14. For a complete listing of Uponor case studies
go to www.uponor-usa.com/commercialcs
Put Uponor to work on your next project
Now that you know the difference Uponor engineering and ideas can
make in a project, the next step is to start reaping the benefits. call us to
set up a meeting with an Uponor representative and review a proposal for
your next project. or visit us online for additional information about our
products and services.
in the United states, call (800) 321-4739, or go to www.uponor-usa.com
in canada, call (888) 994-7726, or go to www.uponor.ca
COMMERCIAL SYSTEMS
25

15. akron art museum
akron, ohio
Photo ©roland Halbe
com_Folder_5_08 © 2008 Uponor inc., Printed in the United states
Uponor, Inc. Uponor Ltd.
5925 148th street West 655 Park street
apple Valley, mN 55124 regina, sK s4N 5N1 caNaDa
tel: (800) 321-4739 tel: (888) 994-7726
Fax: (952) 891-2008 Fax: (800) 638-9517
www.uponor-usa.com www.uponor.ca