2. DESCRIPTION OF GARMENT FABRICS NOTIONS
MEASUREMENTS :
FABRIC NEEDED:-
Dezyne E’Cole College,Ajmer
Submitted By :-
Khushboo Khuntwal
1st Year Diploma FT
SUITABLE:-
UNSUITABLE:-
METRIC IMPERIAL
Dress length 38”
waist length 14”
Shoulder Width 4”
Sleeve Length 6”
BODY MEASUREMENT
GARMENT MEASUREMENT
ROUND CHEST
ROUND WAIST
ROUND HIP
34”
261/2”
36”
CHEST 36”
WAIST 31”
HIP 39”
SMALL MEDIUM LARGE SMALL MEDIUM LARGE
CASE STUDY : 2
14 Pieces
Cotton Polyester, Cotton,
soft Denim Blended fabric
Silk ,Nylon ,Hosiery.
Organdy.
METRIC IMPERIAL
34” 38”
29” 331/2”
37” 401/2”
4” 4.2”
37” 39
13.4” 14”
.4”
6” 6”
32” 36”
24” 28”
35” 38”
.
80
60
87.5
85
72.5
92.5
10
92.5
33.5
15
85
66.1/4
90
90
90
77.5
97.5
10
95
35 35
70
95
95
83.3/4
101.1/4
10.5
98.5
Topper and skirt, Topper with attached
puff sleeve and v shape neckline, basic
a line flare skirt
15 15
Rubber Elastic 1” wide
190.75 76.3”
3. DETAIL OF DRESS
In this case study I have given the details of the design ,and have
included the following details :-
Flat Design :- An hour glass silhouette. the top is a dartless basic
bodice with short sleeves having fullness at cap and
hem. The neckline is v-shaped and the hemline is
straight. The skirt is a basic flared skirt with a 2’’band
Measurements :- The measurement chart for a medium (34’’) size,
female. Seam allowances have also been given.
Notions :- Zips, buttons, threads, and other requirements are
given in details.
Drafting Patterns:- 14 patterns are required for drafting. They are
in 1/8’’ Scale.
Estimation Sheet:- 76.3’’ of fabric is required for the construction
of the garment.
Fabric :- 100% Tubulized cotton of 45’’ yardage has been
used.
Color :- Cream color is used in the base and has beige
stripes outlined with red.
Seams :- Plain and Top seam has been used.
Design Variation:- Variation in seams, fabric, color, and design
that can be given
4. INNOVATIVE DRESS
flare skirt
skirt belt
a line bottom
puff sleeve
v shape neck line with tuxedo collar
puff with ruffled bendsleeve
back round neck line
The variations that could be made in the design are
Fabric :- Which can be used : Cotton blends. Voile, Jorgettes,
Chiffons soft denims,
Which should be avoided: Wool, Brocades, Tusser silk,
Linen, Woolen blends,
Seams :- Double top seam, French seam, Abutted seam, Welt,
and Closed slot seam.
Color :- A wide range of colored fabrics can be used. All Whites,
muted,
the skirt we can use horizontal, vertical or diagonal stripes
checks :- even or uneven.
Design Variation:
Blended fabrics, self woven fabrics
pastels, and pale colors can be used for the top’
Whereas dark shades and tones of different colors can
be used.
Prints :- Floral and geometrical prints can be used in the top. In
5. DEZYNE E’ COLE
GARMENT CONSTRCATION
CASE STUDY NUMBER - 2
STYLE NOUMBER - 2 COLOUR – WHITE & RAD STRIP
WITH CREAM
FABRIC TYPE – COTTON FABRIC YARDEGE OF FABRIC – 36”
PRODUCT TYPE – WOMENS WEAR SAMPEL SIZE – 34” MEDIAM SIZE
DESIGN OF GARMENT
FRONT PART
DESIGN OF GARMENT
BACK PART
6. MEASUREMENTS REQUIRED SEAM ALLOUNCE
TOPPRE FRONT & BACK
SKIRT BELT ½”
SKIRT BOTTOM FOLDING 1”
DRESS LENGTH 38” SHOULDER ½”
FRONT LENGTH 171/2” NECK LINE ¼”
BACK LENGTH 171/2” ARM HOLE ¼”
CENTER FRONT LENGTH 14½” SIDE SEAM ½”
CENTER BACK TO PRINCESS
LINE
2 5/8 TOPEER BOTTOM FOLDING 1”
CENTER FRONT TO PRINCESS
LINE
2 ¾” SLEEVE HIGHT ½”
BUST 34” SLEEVE BEND ½”
WAIST 26”
REMARKSACROSS FRONT 15”
ACROSS BACK 171/4”
SHOULDER WIDTH 4” SEAMS SINGLE TOP, WELT
NECK DEPTH FRONT 7” SEAM.
NECK DEPTH BACK 3” HEAM LINE FLAERD HEM
APEX MEASURMENT 3 ¾”
EDGE FINISHING
SHOULDER BLEAD 7” NECK PIPING
SHULDER TO WAIST LINE 14¾” SLEEVE BEND WELT SEAM
FRONT WAIST LINE 13½” TOPPER EDGE SINGLE TOP
SEAM
BACK WAIST LINE 12” SKIRT HEM PICO
SKIRT BELT WELT SEAM
SLEEVE FRONT & BACK NEEDSLE NO. 16
NEEDLE SIZE
SLEEVE LENGTH 6”
PUFF FOR HEM & CAP 4” THREAD COLOUR WHITE
CAP HIGHT 6 3/8” THREAD NO. 081
7. BICEP CURCUMFERENCE 12 ½” THREAD MATERIAL COTTON
SLEEVE BAND 2” STITCHPERINCH 8
SKIRTFRONT&BACK PART
PIN DRESS MAKER
SIZE 25MM.&L.30MM
SKIRTLENGTH 21”
HIP LEINGTH 7”
FRONTDARTLENGTH 3½”
BACK DARTLENGTH 5½”
SPACE OFBOTH SIDE DART
FRONT
5”
SPACE OFBOTH SIDE DART
BACK
4.7
FRONT&BACK HIPLINE 93/8”
WAISTBELT WIDTH 1½”
FRONTWAIST LINE 6¾”
BACK WAISTLINE 6”
C. F. PRINCESS LINE 2¾”
C.B. PRINCESS LINE 25/8”
TRIMS
ELASTIC WHITE
WIDTH 1”
SIZE 16” LENGTH
TYPEOF MATIRIYEL RUBBER
8. 2D PATTERN OF DRESS
{NOTE:-TOP NECK, SLEEVE CURVE, ARMHOLE, AND SKIRT DARTS
SEAM ARE USED 1/4”SEAMAND SHOULDER, HEM, SIDE SEAM,
BELT, BOTH SECTION OF SLEEVE ARE USED 1/2”SEAM.}
UPPER AND LOWER PART
9. MARKER MAKING OF dress
WIDTH OF TABLE 57”
LENGTHOFTABLE156”
SMALL ,MEDIUM AND LARGE PATTERNS ARE LAID ON A
57” WIDE TABLE THIS IS USED FOR MARKER MAKING .
THE TOTAL LENGTH REQUIRED IS 156”.
10. LAYOUT OF TOP AND SKIRT
WIDTH OF FABRIC 45”
LENGTHOFFABRIC76.3”
11. ESTIMATION OF FABRIC UPPER & LOWER PART
LENGTH OF FABRIC FOR TOP AND SKIRT
TOTAL LENGTH OF FABRIC 76.3” METER{190.75 C. M. )
CREAM BASE COLOUR & BEIGE WITH RED OUTLINE
FABRIC LENGTH IS 76.3” {190.75 C. M.}
12. FRONT PART
BACK PART
SPECIFICATION SHEET
neck depth 7”
neck finished with piping 1”& attached with single top seam
sleeve bend 1” wide & attached with welt seam
topper hem finished with single top seam
finished with elastic 1” wide
flare hemline finished with single top seam
front dart length 3 1/2”
right & left side dart width 5”
puff sleeve
neck depth 3”
neck finished with piping 1”& attached with single top seam
sleeve bend 1” wide & attached with welt seam
topper hem finished with single top seam
finished with elastic 1” wide
flare hemline finished with single top seam
back dart length 5 1/2”
right & left side dart width 4.12”
puff sleeve
13. PRODUCT SPECIFICATION
A LINE
FLARE HEM
SINGLE TOP SEAM
{.5 PRESER FOOT}
COTTON POLYESTER
WAIST BELT
WITH ELASTIC
STRIPED FABRIC
SINGLE TOP SEAM
{.5 PRESER FOOT}
STRIAGHT HEM
WELT SEAM
V SHAPE NECK LINE
FINESSED WITH PIPING
ROUND NECK LINE
FINESSED WITH PIPING
COTTON FABRIC
PUFF
SLEEVE
