1. UniTesS
GNSS Testing Suite
Automation and Management
System for laboratory
Call
is a verified and validated solution
that meets:
▪ GOST 33471-2015
▪ GOST 55534
▪ COMMISSION DELEGATED
▪ REGULATION (EU) 2017/79
COMPONENTS INCLUDED:
▪ UniTesS APM license
▪ Instrument driver
▪ UniTesS NMEA-0183
▪ Scripts for automation according to
GOST 33471-2015,55534 GOST R
▪ Test report template
▪ User manuals
▪ Trainings
▪ Customization
▪ Support
▪ Udpates
For eCall harmonized solution:
Two additional scripts for UniTesS GNSS
TS testing according:
▪ EN CE/TRANS/WP.29/GRSG/2016/19
annex VI
▪ “Supplementing and amending
Regulation (EU) 2015/758 of the
European Parliament and of the Council
concerning type-approval requirements
for 112-based eCall invehicle systems”
Сonsists of:
▪ two scripts for automation
▪ two test report templates
The 3 scripts types available:
▪ full; ▪ quick; ▪ extra quick.
REQUIRED MEASURING EQUIPMENT:
R$S SMBV-100A with options K-44, K-65,
K-66, K-91, K-92, K-94, K-95 and K-96.
(*)SMBV100A can be replaced UniTesS
GNSS Simulator. For ERA GLONASS
ONLY
(*) Optional Spirent instruments Support
Unitess GNSS Testing Suite UniTess GNSS Testing Suite designed, and provides full and
complete testing setup for automotive OEM suppliers,
manufacturers, and accredited testing laboratories:
FUNCTIONALITY
▪ automated compliance testing
▪ automated pre-compliance testing during development or
manufacturing phase.
▪ certification pre-testing procedure for manufacturers.
PROCESSES
Unitess GNSS TS software controls the solution and allows to:
▪ Control of the measurement equipment
▪ 100% step by step testing process according GOST R and EU
requirements
▪ Analyze of the NMEA flow from GNSS reciever
▪ Store a detailed history of testing
▪ Calculate all necessary parameters by ERA-eCall srandarts
▪ Create Test report
REPORTS UNITESS GNSSTESTING SUITE
DUT GNSS/
GPS receiver
DC blocker and
Attenuator 80 dB
RF Connection
GNSS
simulator
USB,ETHERNET
USB,ETHERNET
USB,ETHERNET
2. Script example:
DriverSet SMBV100A Reset; GPS_SMode = User
NMEA0183Set ProtocolReset; Mode=Protocol
NMEA0183Get mem_10=CoordinatesValidTime
NMEA0183Set Mode=DynamicAccuracy
NMEA0183Set DynamLoadRefFile= "waypoints_1.txt"
UniTesS GNSS Testing Suite
Simple script editor
Detailed step by step debug mode
Unitess GNSS Testing suite
Unitess Script Language- flexible and simple. Customer can adopt or adjust script
for own needs and requirements
Two users interfaces:
▪ simple
▪ debug
Easy script language support
3. UniTesS GNSS Testing Suite
NMEA-0183
▪ parsing and logging NMEA messages from receiver;
▪ measurement time parameters in accordance with necessary standarts
▪ analyze satellite constellation;
▪ calculate errors in dynamic and static modes according to necessary standarts
▪ Can be controlled by UniTesS GNSS Testing Suite and specially developed script.
Connection tab.
Visible Constellation.
(Visible Decision Satellites,
signal power, elevation
level, azimuth )
NMEA Fix Data,
script editor.
Static analyze tab.
Current receiver data,
reference points.
LLA errors per 1 sec.