1. Ron Hutchinson
10/23/2014
4000 Sigma Rd. #10201
Farmers Branch, TX. 76244
972-567-2496
mycrona201@hotmail.com
S U M M A R Y
 Highly skilled and qualified quality professional with more than 28 years of
experience with a demonstrated ability to maintain strict tolerance standards on
high-tech measurement equipment.
 My experience with Coordinate Measuring Machines (CMM’s) has positioned me
as an authority on their programming and operation. CMM’s include: Browne &
Sharpe, Mitutoyo, Mycrona, Nikon, OGP, Cordax and DEA. Utilizing touch and
scan probing, optics and laser. CMM software’s including PCDIMIS, MCOSMOS,
MeasureMax, TUDOR, Keyence IM, GEOMATIC, GEOMEASURE and DOS.
 Extensive experience in all forms of GD&T. Additionally, I am an expert at blue
print interpretation, close tolerance, repeatable part measurement, gage
repeatability and reliability and trouble shooting. GR&R studies that reached
“sub-micron” level. I enjoy working with other people and possess the
communication skills to make each interaction a positive experience for everyone
involved.
 Proficient with SOLIDWORKS 2014. Completed SOLIDWORKS Essentials course in
late 2012. Proving the “cost-effectiveness” of “off-line” programming CMM’s prior
to 1st article part reaching the Quality Lab and reducing Manufacturing “down-

2. Ron Hutchinson
Page 2
time” waiting on 100% dimensional inspection prior to “Production Run” and CMM
fixturing (when required).
 SPC Software include: INFOR VISUAL ERP, IQMS, Excel and Realtrac.
S K I L L S
 Scales, calipers (veneer, dial and digital), height gages, indicators, micrometers,
surface plate, lay-out inspection, pi-tape, sine plate, heat-treat, weld, Rockwell
hardness testing, Gage Maker, development, reverse engineering, trouble
shooting, calibration, statistical analysis, corrective action response, quality
directive (including writing standard operating procedures), source inspection,
quality liaison, employee training, quality cost analysis and in-process analysis.
E X P E R I E N C E
QUALITY CONTROL INSPECTOR| Shamrock Precision, Farmers Branch TX.
2012 – PRESENT
 CMM Programming / training (on-line and off-line). Proper Metrology Practices for
inspection and machine shop personnel (including GD&T interpretation and “on-machine”
verification utilizing coaxial and dial indicators).
 FIRST ARTICLE, IN-PROCESS and FINAL INSPECTION. Including Prototype Customer Parts.
 Build 3D CAD MODELS in accordance with customer 2D prints and Shamrock Precision
proprietary design parts using SOLIDWORKS software. 2D BLUE PRINT Drafting from 3D
CAD MODELS.
 CALIBRATION of company and employee measuring equipment (including setting-up
GAGEPRO calibration software).
 DESTRUCTIVE TESTING per customer specific processes and procedures.
CMM PROGRAMMER| Pace Industries, Harrison, AR.

3. Ron Hutchinson
Page 3
2011
 CMM Programming (on-line and off-line). Off-line programming includes with and without
CAD MODELS (IGIS.STEP and DXF) and verified company CAD MODELS. Trained CMM
Operators.
 FIRST ARTICLE, IN-PROCESS and FINAL INSPECTION.
CMM PROGRAMMER| Defiance Metal Products, Grand Prairie, TX.
2009 - 2010
 CMM Programming (on-line and off-line). Off-line programming includes with and without
“CAD MODELS” (IGIS.STEP and DXF) and verified company CAD MODELS. Trained CMM
Operators.
 FIRST ARTICLE, IN-PROCESS and FINAL INSPECTION.
 Extensively worked with GD&T utilizing CMM software. Designed and validated CMM
fixturing.
QUALITY CONTROL / CMM PROGRAMMER| Fore Machine, Haltom City, TX.
2007 - 2009
 CMM Programming (on-line and off-line). Off-line programming includes with and without
“CAD MODELS” (IGIS) and verified company CAD MODELS.
 FIRST ARTICLE, IN-PROCESS and FINAL INSPECTION.
 Extensively worked with GD&T utilizing CMM software. Designed and validated CMM
fixturing.
 Used ISO Quality Standards for internal audits.
QUALITY ASSURANCE MANAGER| Horizon Tech. Ind, Ft. Worth TX.
2005 - 2007

4. Ron Hutchinson
Page 4
 In-charge of daily Quality Operations including: 1st article inspection, calibration (internal
and external), internal quality auditing, CMM programming / training, internal and external
Corrective Action Required (CAR) and Statistical Process Control (SPC).
 Documented and maintained the inspection results.
CMM PROGRAMMER / INSPECTOR II| Medtronic Powered Surgical Solutions, Fort Worth, TX.
2001 – 2005
 Performed 1st Article / In-coming inspection. Research and Development (R&D) support.
Internal issues support. Trained personnel in running approved programs on the CMM.
Gage Repeatability and Reliability (GD&T) training and GD&T training.
 Documented and maintained inspection results.
FACILTATORII| Corning Cable Systems, Fort Worth, TX.
2000 – 2001
 Conducted inspection of Fiber Optic Connectors.
 Performed 1st Article inspection. Programmed and validated production CMM (GR&R
studies requirement of 10% max on .001mm True Position Regardless Feature Size (RFS))
and trained production operators (17 covering 3 shifts).
 Fixture Design for CMM’s.
 Insert wear studies for Swiss Lathes.
 Assisted Engineering Dept. on customer issues and R&D on new product development.
 Documented and maintained inspection results.
GENERAL INSPECTOR| Menasco / Goodrich Landing Gear Div. Euless, TX.
1997 – 2000
 Provided oversight of machine set-up. Performed 1st Article inspection and R&D.
 Oversaw all 2nd shift inspection and acted as the trouble shooter for the CMM operation.
 Recognized as the only new hire in company history to be hired as a “General Inspector”.

5. Ron Hutchinson
Page 5
 Documented and maintained inspection results.
 Certified in heat-treat, hardness, shot-peen, plating and weld inspection.
INSPECTOR III| UNC Artex, Addison, TX.
1996 – 1997
 Provided in-coming evaluation of aircraft accessory gearboxes (including gear and bearing
evaluation). CMM Programming, reverse engineering, calibration and final inspection.
Received FAA Repairman Certification.
INSPECTOR III| Electrocom Automation, Arlington, TX.
1991 – 1996
 Provided inspection (sub-assembly, mechanical, final and source) and CMM programming
for currency and mail sorting machines.
INSPECTOR II| Interturbine Airfoil / Pratt & Whitney Eagle Services, Grand Prairie, TX.
 Acted as shift lead over inspection and non-destructive testing. Directed the “Blade Cell”
in-coming evaluation, in-process and final inspection procedures.
 Trained in programming CMM. Received FAA Repairman Certification.
E D U C A T I O N
1982 Humboldt High School, Humboldt, IA.
1984 Lincoln Technical Institute, Des Moines, IA.
2000 Mycrona USA, Detroit, MI.

6. Ron Hutchinson
Page 6