2. Who is ETAP
Products / Solutions
Clients / Partners
How Opal-RT and ETAP can serve the utility industry
3. Design
Simulation
Analysis
Optimization
Planning
Operation
Analysis
Control
Optimization
Automation
Customize ETAP to fit your needs,
From small to large power systems
AComprehensive SoftwarePlatform forPowerSystems
Real Time
ETAP Overview
4. Corporate Background
• Established in 1986
• 200+ full-time employees worldwide
• 100+ research, development and support engineers
• 29 years of growth, average rate of 25+ % per year
The largest network of offices and support centers serving the
Power software industry
6. • Global: 50,000 licenses of ETAP products have been
sold and utilized in power system projects around the
world…
• Trusted: 5,000 companies, electric utilities, and
government agencies in 100 countries worldwide rely
on ETAP.
• Proven: 100% of the top electrical design firms use
ETAP (source: ECM); 80% of these firms have
multiple/corporate ETAP licenses
• User-Driven: 95% of our software features and
functions originate from user suggestions and requests
The Industry’s Most Proven Suite
7. ETAP Software Suite of Products
• ETAP is the most proven, integrated suite of software products for the
entire lifecycle of electrical power system from design to operations:
– ETAP®
: Power system design, modeling, analysis, and
optimization software tools.
– ETAP®
Real-Time™
: On-line, real-time predictive power
system management software.
– ETAP
®
Grid
™
: Enables electrical utilities to plan,
coordinate and safely perform power grid operations.
8. ETAP Design & Analysis Suite
Robust base modeling package with 50 integrated modules:
9. ETAP Real-Time™
• Power System Monitoring & Simulation (PSMS)
• Energy Management System Software (EMS)
• Substation Automation Management System Software (iSub)
• Intelligent & Fast Load Shedding Software (ILS)
• Distribution Management System (DMS)
• MicroGrid Master Controller (MMC)
Industry’s most proven platform for real-time power system
management , operations and maintenance:
10. • Allows users to manage, control, visualize, optimize, summarize and
automate power distribution networks
• State-of-the-art Distribution Management System (DMS)
• Powerful integrated GIS capabilities
• Integrates and modernizes existing Supervisory Control And Data
Acquisition (SCADA) systems
ETAP Grid™
Enables electrical utilities to plan, coordinate and safely
perform power grid operations :
15. End-to-End Simulation
• Provide a complete solution, allowing the companies to design and
develop utilizing the ETAP’s software and test and validate using
OPAL-RT’s HIL simulation framework
• Reduce risk and cost of grid automation solution deployment
• Leverage tools of ETAP and OPAL-RT to create a market-leading
solution
• Develop demo with grid simulation on OPAL-RT and with ETAP AGC
commanding generation levels.
• Objective is to create a solution showcasing ETAPs Real-Time product
portfolio and OPAL-RT’s simulation product portfolio.
20. AGC Integrated with ePHASORsim
Convert Model
ePHASORsim modelETAP Model Real-time Visualization
Real-Time server
ETAP AGC Application
Send Generator’s
• Bus voltages
• Active power
• Reactive power
• Frequency
Send power set-point
Send AGC Control
set-points
Get simulated results to
Calculate objective set-points
ePHASORsim hardware simulator
21. • Problem
Needed a system to replace an unreliable legacy solution.
Optimize electrical power management
No dynamic load shedding solution
• Solution: ETAP Real-Time PSMS and ILS
ETAP PSMS was installed to provide monitoring and display
parameters of electrical power distribution and power generation systems
ETAP ILS was used to perform calculations to establish
efficient operations and predict the effect of changes to these systems
Test and simulate the AGC control system
• Benefits
ETAP Intelligent Load Shedding (ILS) recognized problems within
the system and prompted the proper shedding of loads based on
the customer priorities
ETAP ILS dynamically determines the best load shedding priority in just fractions of a
second. The system is fully redundant and provides complete optimization of key
generators at the facility.
Arzanah Island is part of ZADCO’s Satah field which is about 200
km north-west of Abu Dhabi. Water Injection facilities for Satah
field are located at this Island. Power is generated at 13.8kV by
Ruston make Gas Turbine Generators (RGT) installed between
late 1970s and early 1980s.
Sicon Oil & Gas Spa
22. • Project
• UC Irvine is combining novel strategies for energy efficiency, energy management,
and self-generation with research that positions the campus as one of the nation's
most advanced field laboratories for community energy generation and utilization,
and microgrid technology.
• The partnership is led by the UC Irvine Advanced Power and Energy Program in
collaboration Partners include ETAP, Siemens, MelRoK, Toyota, and UCI’s
Transportation and Distribution Services.
• Solution: ETAP Real-Time PSMS & MMC
PSMS runs real-time load flow and short-circuit calculations (both balanced fault and
unbalanced fault) and using system online operating conditions determined by SLE
Visualization of the renewable assets at the campus
Optimizing the performance of the electric grid. Renewable generation, and advanced energy
storage that yields cost savings and reduces emissions.
• Goals
To demonstrate a variety of existing and new smart grid technologies.
Determining how smart grid technologies connect, communicate, and operate with each other.
Reducing energy costs to customers by shifting usage loads to off-peak hours
23. ETAP Smart Grid Solutions
23
• Model Based
• Intelligent Monitoring
• Online Predictive Simulation
• Sequence of Events Playback
• Supervisory and Advisory Control
• Intelligent Energy Management
• Intelligent Load Shedding
• HIL Validation
24. Frank Kling
Director of Business Development
ETAP
17 Goodyear, Suite 100
Irvine, CA 92618
Frank.Kling@etap.com
(949) 900-1014
Thank You