We begin with evaluation of the Glass Build as an Engineering Process of Synthesis in Architectural Design in ARK Mode. Although Pro-Forma and Pre-Production we examine the Economic Change as we position the product in the market. The Major Shift in tooling design and fabrication methods contributes to a NEW ECONOMY; In V2 we study how the Matrix Expands to provide for new tooling that accomplishes feats of design and fabrication synthesis In V3 we see the economy vastly expands as the tooling requirement is satisfied and the building design and treatments increase equity builds
The Glass House V3 The Economics of Glass in Ark Mode
1. The Glass
House
ARK MODE BUILDING
MDIA
Contents
V1 Building with Synthesis
V2 Matrix Trees Expansion
V3 The Economics of Glass in Ark Mode
V3 The Economics of Glass in
Ark Mode
Glass has an Economy of mega
proportions in the Ark Mode that
quickly outpaces and dwarfs the Digital
Economy. Without a moral and covenant
minded basis that would be reduced by
depleting its vested portion.
2. Secant Wheel Construction
Product
Media
• Product
Modeling and
Interactive 3D
Media
Product
Confection
• Light
Fabrication
Product
Synthesis
• Heavy
Construction
The Nations shall assemble before Him
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 2
3. Outline of the Project
I. Define the Product
II. Define the Method
III. Create the Story
IV. Define the Technology
V. Sponsor the Mix and Remix
VI. Obtain Certifications
VII. Deliver the Project
Note that the final building will have LIFE
Certification on it for Equity Appraisal
Next Year
Define
the Load
y = -0.05336x + 2,599,363,695.91464
R² = 0.12306
Finger print w/ z path
98.5% c.f.
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 3
A
4. 1. Define
the Product
(Change
Order)
(The change order C-01 for new cement for the foundation is the portion of the product we
want to outline here since the project itself is multifaceted and worked on by many
people.)
Wall Expansion Joints: change notes
Wall expansion joints should be designed to accommodate the anticipated structural
movement. Consult with a structural engineer regarding possible movement. For
treatment of leaks providing amplified external drainage media similar to that
required on the exterior wall is highly effective. Special emphasis is placed on
evacuating the water at the wall base to avoid water build-up in the back fill or
drainage system.
1. The Consultant for the foundational treatment of the building recommended a
cement and anchor system due to the ground movement in the area and the
additional concern of flash flooding
2. Within the glass system we expect to find varying products due to conditions that
are prebuilt for this purpose, by other groups. Since the Nature of Glass is to plait,
we have a good reason to expect that the product demonstrated should be
adequate to do the job, and that it was produced with the same type of oversight on
it.
3. Changes in tooling and drawings were discussed in our paper: Builds and
Simulations
4. We need to decide on the process for synthesizing the building materials.
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 4
5. Specifications
D/N MM-ENG-M24-1
Because this is plait glass, bolt
insertion is like replication, and
works with remote drill head into
applied plait simultaneously across
length of it, similar to injection
molding process.
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 5
6. II. Define the Method
A science center for materials research is planned and the engineering
firm of Magi & Marcus is responsible for developing the Plan. The story
develops with the decisions regarding the foundation and the changes
required for cement and anchoring impact the project. The drilling and
anchoring for higher density cement has impacted the tooling and the
anchoring system for the foundation.
We need to identify the parts, drawings and secants that will change and
supply substitutions, within our storyboard. But the method for the
cement synthesis is a major to do list, within our process, primarily due to
the extra formations needed in the rear of the building where the lab is
located. The Science Center is to be dedicated to the study of materials,
in terms of gradation and low impact analysis.
To Be equipped for
Remote Building
Research
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 6
7. Material
Plait
By devising the Plait, it also allows
for the prototyping process to
synthesize & Test the product
P/N MM-CEM-864130-1
Confection occurs
upon Replication
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL
7
V2 Change
8. III. Create the Story
Change Order is First Applied Tech
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 8
Due to the nature of glass itself, the
wall is plait to the column as a more
substantially configured union
Secants subject
to development
Matrix Changes see V2
9. IV. Technology: Remote Tooling
The theory for the remote tooling
consists of pointing glass to a
specific area and configuring it to
run lengths on materials by
assembling secants to a specific
fingerprint assignment.
The glass concept allows the 1W
Digital Secant to confect the
product upon replication and to
maintain the glass model with
drawings. Ark Media eventually
will become remote building.
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 9
R
10. IV: Technology:
Synthesis
Synthesis is using a secant driven process to derive material properties
for a complex or heavy-duty material requirement. After it is Synthesized
it can be plait down into a media format and replicated. Because of the
dimensional construction of Ark Mode processes in Plait Glass the z-
strength of the glass can benefit the build out rapidly. Once it is well
understood the Ark Media model will provide for write capability to build
remotely. Small local operations with tooling are permissible. All
Materials must be tested and simulated for the job requirement.
The first instances of Synthesis will be done by the prototyping engineers
and then turned back over to the industry. After engineers are trained for
this process, it can be less of a centralized operation but still requiring
LIFT certification and finally the project must be LIFE certified. Some
aspects of this were discussed in our last paper: Builds and Simulations.
MM-CEM- 864130-1
1023.15yd³= 27625.05ft³
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 10
Technically there won’t be any
loss of the product, because
whatever is not consumed will be
used in testing
11. Remote Building
Plan
Magi and Marcus Engineering plans to invest in a
Plait Glass facility for building and research in
remote Ark Science. The remainder plait at the Gate
pays off their initial building outlay on the theory
that the demand for this type of building will be
greater than the original Scorecard Advantage,
accomplished in 1 z-period of the build, a gain on
the current manifold by an added level of burden.
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 11
A
Conversion value emulates ROI as consequential Value
Gains lag with
Production
12. The 1Wheel Fabrications and the
7Wheel Ark Mode Architectural
Build are Combined for Fair
Market Value All Builds
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 12
There is a loss of
carriage burden
due to non-
completion of
the work cycle
Pre-Production
7W Build
Market
Slide 13
Metrics and
calculations
support
future work
13. V2 Matrix Expansion
The building of machines and equipment in Ark Mode requires a focus on the matrix configuration
of the build technique.
Also, with this expansion comes economic changes that impact the way business is configured
and operated. (Discussed in V3.)
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 13
Machines plus tooling
Technological change
Multiple Industries
Economic Impact Real Change
Redistribution of
Resource and
Opportunity (Wealth)
3D Television and Modeling, Light
Fabrication, Heavy Construction
8 Wheels plus nominal threading
4000 3.5 10
^ x = $40 T
Consider that there are at least 15 industries involved
Potential
60,000 M-tools
population
$52.908 Quad
MARKET VALUE
.4698/2=.235
Slide 12
14. Expected
Completion
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 14
Before building a Matrix, we wanted to check our standards.
Pre-production is
leaving burden
at the Gate
unapplied, and
incremental
value added as
a remainder
15. Products and Fabrications
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 15
R
Ark
Modeling
Ark Media
Fabrication
Tooling
Still operating in Read Mode, not LIFT
or LIFE Certified, SECANT STUDY
Based on Costing of Intellectual Property
7WR 1W Digital
16. Why Expand the Matrix
Building, we discovered, has many intricate designs and shapes and many
theories about building haven’t been tried due to the material nature of the
world. In Glass building, new designs become possible as we expand the array
of the matrix, we can change the recipe for the product.
Excerpted from Article: “Once in Rome, Astorino looked to his faith for inspiration.
The site was triangular and posed a design challenge for an architect trying to create a
square structure.
“I finally came to the conclusion that this is a triangular site, don’t fight it, and follow
God’s lead,” Astorino said.
He chose to study what God did with triangles in nature: fractals, snowflakes and even
coastlines. Ultimately, he realized that a triangular design even complemented the
name of the building — the Chapel of the Holy Spirit — because a triangle reflected the
Holy Trinity.”
BRIJ CONSULTING, LLC, JEAN MARSHALL 9/24/2021 16
The idea of layering
the confection is
similar in materials
∆ ECONOMY
From Eru finds a Golden Pen
17. Using additional arrays
BRIJ CONSULTING, LLC, JEAN MARSHALL 9/24/2021 17
Using an additional array within
our structured column or beam
from the base we can confect a
marble finish on the product
18. Synthesis
The action of performing an additional operation on
our confected cement beam from its base is
something like injection molding putting additional
plait glass materials to work to develop marble in the
façade of the column, beam or table/base
BRIJ CONSULTING, LLC, JEAN MARSHALL 9/24/2021 18
GLASS Mix
Secants
Secants
Marker
Utility
Tooling
The means to create density in scalable function is not discussed here
Manifold 1W device
19. St. Mark is symbolized by the Lion
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 19
The Evangelist Mark wrote his gospel four years later, in the forty–sixth year after the birth of Christ.
He likewise wrote it in Hebrew and while in Palestine. Before commencing he asked his guardian
angel to notify the Queen of heaven of his intention and to implore her assistance for obtaining the
divine enlightenment for what he was about to write. The kind Mother heard his prayer and
immediately the Lord commanded the angels to carry Her with the usual splendor and ceremony to
the Evangelist, who was still in prayer. The great Queen appeared to him seated on a most beautiful
and resplendent throne. Prostrating himself before Her, he said: “Mother of the Savior of the world
and Mistress of all creation, I am unworthy of this favor, though I am a servant of thy divine Son and
of Thyself.” The heavenly Mother answered: “The Most-High, whom thou serves and loves, sends me
to assure thee, that thy prayers are heard and that his holy Spirit shall direct thee in the writing of
the Gospel, with which He has charged thee.” Then She told him not to write of the mysteries
pertaining to Her, just as She had asked saint Matthew. Immediately the Holy Ghost, in visible and
most refulgent shape, descended upon saint Mark enveloping him in light and filling him with
interior enlightenment; and in the presence of the Queen, he began to write his Gospel. At that time
the Princess of heaven was sixty–one years of age. Saint Jerome says that saint Mark wrote his
short Gospel in Rome, at the instance of the faithful residing there; but I wish to call attention to the
fact, that this was a translation or copy of the one he had written in Palestine; for the Christians in
Rome possessed neither his nor any other Gospel, and therefore he set about writing one in the
Roman or Latin language. The Mystical City of God
Facades
20. Glass Economy
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 20
V3 The Economics of Glass in Ark Mode
We are suggesting that to increase the original
fabrication method with another Matrix method
such as to marble a column/beam would add
about 4% onto the Cost. An accompanying gain in
units of Intellectual Property would compensate.
U.’s
reduced
Once the tooling is established façade value will
increase property value without adding cost. The
Standard Cost will not change without affecting the
relevant range dimensionally by adding new
requirements for deploying a workforce or a payload.
We will
increase
this with
instances
of
Planned
Economy
4.8+78 =
82.8- .6 =
82.2 exp. ROI
21. Continuity of Build
Once the fullness of this
arrangement is complete, all tooling
known, all material prototyping and
process produced, there is no end to
what can be performed with it. But
the theory of it may still advance
beyond what is shown now. This is
enough for at least 20 – 50 years.
9/24/2021
BRIJ CONSULTING, LLC JEAN MARSHALL 21
All Utilities that will be
present to it come from
the wall, including the
more heavy-duty
assembly for Ark (not
yet discussed.)
Iterative results
Property conversion
and Load
She was taught by the highest Teacher and the Corrector of the
wise (Wis. 7, 15), that, if by any means man or angel could
describe it, more books would have to be written of this science
of our Lady than all those which have been composed in this
world concerning all the arts and sciences, and all the
inventions of men.
22. The Concept of Remote Building
When Properly Introduced the concepts of Ark
Media and Ark Modeling join forces for
Remote building in such a way that a plait-
induced and scalable material can be
conjointly managed by artefactual
arrangements. In this manner our characters
of Allbe and Eru in our storyboard can become
our carpenters and masons at the job site,
including utility repair and upgrade. This is
possible but may take quite some time to
realistically achieve the full scope of building
with ambient labor within the glass system.
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 22
Ark
Modeling
Ark Media
By mixing and remixing the secant and wheel
combinations along with tooling and machines, the
Ark Means to Remote Building will become
plausible along with delivery of different types of
fabrications. However, by doing this we are
changing the dimensions of workforce and payload.
7WW is likely to require new costing and load standards when remote capability is added.
The place where standards are unlikely to be impacted is by
increasing product density and requiring transport
Ordinary site
labor and
freighted
delivery do not
change glass
standards
“Going Remote with Ark Science,” our next paper
23. Important
Steps
Both Ark and Digital processes have additional steps to complete the
various cycles of fulfillment, but the Ark mode is not outlined at the date this
is published. These steps include:
Interpolation: determination of scope and requirements for
customer and vendor fulfillment, includes demand assessment
Plaits: Scaling the project to its dimensional time and motion
requirement and enabling the work to succeed at the standard and
scope set
Pipes: the means to translate and transmit the object to and from its
engineering and its ultimate placement for replication and the
continuous delivery
Arrays: Interdimensional Arrays permit confection at various levels
and associations of the product.
Trees: Trees have not been presented with the depth of the
requirement, requires future paper. Trees are related to the Matrix
requirement for Secant Fulfillment, but hold the broader schemas
Menus: Menus are carried internally for the purpose of upgrading
and operating some feature of the object.
Utilities and Switches: Objects often work with general purpose
utilities and properties and may have interior utility considerations
BRIJ CONSULTING, LLC JEAN MARSHALL 9/24/2021 23
UPCOMING TOPICS IN
ARK DESIGN MODE
24. Relational Functions of the Model
Interior
margin
Binary
Path
Standards,
Weights
and
Measures
Reinvestment
Path
Growth
Rise
over the
Run
Equity
Using the Economic
Model Equity is stated
at Fair Market Value
9/24/2021
BRIJ CONSULTING, LLC JEAN MARSHALL 24
The Interior Margin is
preserved using relational
functions of the Model
Without Covenant Practices
and Moral Behavior (Virtue) the
Interior Margin is depleted
Valuations are important
to keep costs in line with
benefits derived^
^ due to the nature of both long-range planning and utility design
justifications based on benefits are sometimes overlooked,
however a competent oversight approval statement is needed
25. Creator of the Stars
The Throne in Heaven
…2At once I was in the Spirit, and I saw a throne standing
in heaven, with someone seated on it. 3 The One seated
there looked like jasper and carnelian, and a rainbow that
gleamed like an emerald encircled the throne.
4Surrounding the throne were twenty-four other thrones,
and on these thrones sat twenty-four elders dressed in
white, with golden crowns on their heads.…
BRIJ CONSULTING, LLC, JEAN MARSHALL 9/24/2021 25
On Earth as it is in Heaven,
Matthew 6:9
26. Twelve
Covenant
Points of
History
BRIJ CONSULTING, LLC, JEAN MARSHALL 9/24/2021 26
1. Covenant minded Rites
and Practices
2. Learning forms from
experience a means of
security
3. Roles assigned of
leadership and succession
4. Events publish the new
means of the law and its
form
5. Leadership is placed in
the hands of the most
capable
6. Obedience yields safety,
longevity, (continuity,) and
the rewards of plentitude
7. Faithful observers
prudently wait for the
timing of actions
8. All financial (and
scientific) means are
supplied (and raised up) to
the Plan, establishing
equity throughout
9. Movement of the
Position of Interests
obtains more predicated
results
10. The best practice and
position laid upon the Table
is establishing the mission
for a strategic period, a
sustainable length that
serves as counsel
throughout
11. Sovereign Kingship is
retained in heaven while
self-governance is sought
as self-mastery under the
law and its precepts
12. Human dignity is given
a powerful place in the
Plan as co-operators and
participants to the fullness
that providence will allow.
Behold, I make all things Brand New
Rev 21
A Treasury Model must be
secured in a Covenant
Relationship
27. Secant In-Rates
PV
Although we reworked our Rates, our analysis suggests we will
not encumber the foot walk or encryption
Crosswalk
9/24/2021
BRIJ CONSULTING, LLC JEAN MARSHALL 27
533-506=27
Notice the Incumbent Load (See V2)
Slides 5,10,13, App I
Thruput plus (Value added 2 – Value added 1) = 27 alpha task
29. 9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL 29
Report Retention
It is important to keep civil engineering records related to justifications
of various treatments to demonstrate evidence that properties are
essential proprietary characteristics and are valid for intellectual
property continuance; a history may demonstrate that certain tooling
and other mechanics rely upon it. The storyboard is the single most
important civil document and should store all details about the project
Glass will
hold inter-
relational
composition
to specific
tools and
plaits if
records are
annotated
30. Economic Number
Sense of Glass Product
9/24/2021
BRIJ CONSULTING, LLC JEAN MARSHALL 30
Comparing
the Product
ROI
α
78.2+ .9
+1.1=82.2 thruput
31. What is Required
Architectural Plans, Digital Glass Model
The Glass Modeling System, Ark Mode
3- Dimensional Media Model
Storyboards to describe…
Process Plan
Integral Materials
Organization of Instances of
Building (Preludes)
Secant Construction and Engineering
Building Organization for Ark Mode
Methods, Tools and Utilities
The Design of the
whole process will
be an extended
period of listening
about this subject.
But we will spend
our time in our
next paper
organizing Secant
Processes
Monks of Norcia - Donations - EN - Monastero di San Benedetto in Monte (nursia.org)
31
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL
32. Our papers
32
This paper is THE GLASS HOUSE
V3 and V4
holds all
contents
1. Portfolio Wheels: Study of Secants and Wheels in the Dynamic requirement for
Media to write and produce in Ark Science and Dimensional Systems, Introduction
of the Story “Eru finds a Golden Pen.”
2. Ark Media: The Dialogue of the Story and the Construction of Storyboards, Mix and
Remix specifications, beginning crosswalk and encryptions
3. Builds and Simulations: Discuss Matrix Trees, Migratory Patterns and the use of
Secants to Build tooling
4. The Corner of Mu Sic: an update of our Digital Paper on Mu Sic to include Ark
encryptions and design considerations
https://www.slideshare.net/Marshallja/presentations
See next slide for list of the preceding Digital
Plait content
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL
Magi and Marcus Engineering plans to invest in a Plait Glass facility for building and
research in remote Ark Science. Start of Tooling and Secant Design for the
Construction Industry
33. 33
1. Ark in Glass: Changing the Schema for Ark Mode crossover, beginning study of Secants
and Wheels for the “cube-ified glass” engineering of Imaging, sound and motion
characteristics.
2. The New Stone: Simulations and Re-instancing to package, confect and view glass media
3. Dimensional Building: Dimensional Arrays, Z strength, Product Media, Interdimensional
Matrices.
4. The Dynamic Instance: Product Media Discussed
5. The Glass Build: Base Build and Modules Assembled, considering impact of dimensional
systems
6. Glass in the Making: Costing and Loading, Assembly and Assimilation, IP Defined, Logos
7. Art of the Science: What can be made? Assimilation discussed, look at basic product
ideas
8. Digital Glass Production: Pipe Transit and RIK Declare, Batch Appliance (Dialogue paper)
9. Imposition of Value Engineering: Establishing and Justifying the Load for Pipe Transit
10. The Digital Plait Position: Engineering Design of the Load and Thruput
11. ^Mu Sic in the Advancing Age: Use of Fingerprint and Encryption for Operational Loads
12. Engineering Objects: The Purpose of this Paper is to Consider the means to raise up a
Digital Portal Production System using appliances gained through Plait Object and Gate
driven configurations that work with Digital Mechanics. Six-Layer Glass and Appliances
13. Instancing at the Gate: Use of Gates and Instances, bridging of the engineering process
14. Interpolative Scope: Use of a Demand and Production Scope for building and delivery of
product, learning to specify material, looking for union of Vector
15. Functional Glass: Fitness for Function and Moral Intelligence, Bayesian Analysis
16. The Glass Wall: This is a very difficult staging of advanced engineering to depict …Motivated
by sound it creates a means by sound to cascade light for safe and wireless power
17. The Glass Wave: Learning to Plait Gates, Reconcile Metrics to Scorecard, and load value of Scrum
18. Scrum Costing w/notes (Book It Daniel): establishing scrum standards (Dialogue paper)
19. Gate Plait Green (Mark It Mark): first scalable plait arrangement overcomes bottleneck
(Dialogue paper)
20. Scorecard Integration (Map It Ralph): A review of mappings to date, marking old vs. new
(Dialogue paper)
^Mu Sic, see The Corner of Mu Sic
To Change
Digital Plait Papers with Content Description
(Reverse Order)
9/24/2021
BRIJ CONSULTING, LLC, JEAN MARSHALL