Advantages to Industrial Physics and Digital Portals in Developing Green Technology and Remote Building, increasing Industrial Scale and Reclaiming Legacy with Advance Science... Modeled in Financial Planning

1. Ark Product and Process
Design Mode v1
-5,000,000
0
5,000,000
10,000,000
15,000,000
20,000,000
25,000,000
30,000,000
Assembler Times
Instance1
Instance2
Instance3
0
50,000,000,000,000
100,000,000,000,000
150,000,000,000,000
200,000,000,000,000
250,000,000,000,000
% Tertiary
Demand
Demand Rate Equity in
Product
Market
Land Projects Ark Projects Building Projects

2. This is not a Prospectus as
the Process and Products are
still in the Scientific State of
Invention. However the
Advanced Ark Staging
Concept is aligned with the
Digital Build and permits
examination
in order to invite innovation
in the industrial arts and
sciences.
8/13/2020 Brij Consulting 2

3. Ark Products in Portal and Substructure "Digital fabrication in architecture: The challenge to transform the
building industry." ScienceDaily. ScienceDaily, 17 February 2017.
<www.sciencedaily.com/releases/2017/02/170217160931.htm8/13/2020 Brij Consulting 3

4. • Ark Products and Processes will:
• Replace our entire Economy with new Dimensional Building and Remodeled
Processes
• Building will take place with Camera-Like Equipment
• An emerging Green Economy will thrive, replacing all fuel-based products
• A Market Modeled Economy based on Benefit Sharing will emerge
• An entirely new Portal Based and Gated Digital System will replace current
Media
• Because Knowledge Share is immediate and always advancing all peoples
will share equally in the Benefits derived from a pool of Ark Driven
catalogues
• There will be no government, there will be orchestrated achievement on a
world scale
• Health will cease to be an issue just like wealth will not even be discussed.
• Re-imaging will take place at a standard of perfection at about an age of 25
on average, gradually.
• God will be ALL IN ALL and there will be no more strife or pain,
disagreements or contentions
• Mechanics will persist but God will support everything with a special Light
component and His Own Ark Based System
The Promise
of Tomorrow
begins Today
8/13/2020 Brij Consulting 4

5. Product
Price, Unit,
Demand Grid
8/13/2020 Brij Consulting 5

6. • By Looking at the Scale of Demand both Internally and
Externally the Resource Requirement can be determined.
• For new technology that is not previously offered, it is
necessary to estimate a market demand, rather than to
choose from the market a representative sample (A Value
Scope)
• The Value of unrecorded digital assets worldwide is
estimated by Standard & Poor’s at $30 trillion.
• The Interior Market, often denoted by Value Added
equations, is more visibly interpolated as well as grown in
digital portal arrangements.
• To Interpolate this Growth for Financial Customers in a
Supply Chain Arrangement would be the most valuable
contribution of Digital Portal Services
Interpolative Services
and Digital Scope
8/13/2020 Brij Consulting 6

7. Financial Plan, Page 1
8/13/2020 Brij Consulting 7

8. Financial Plan, Page 2
Five Year
Technology
Growth
--Funding to be Applied to Tech Production--
See next
slide
1
8/13/2020 Brij Consulting 8

9. Break-Even Funding Applied to
Technology Development
Equity Growth
Reserve Method for Funding Projects^^
1
2
3
4
1. Equity formed Year 1
2. Production Funding in Reserve
3. ^Pass-thru Margin is shown
4. ^ROC is consuming Investment
^@ B-E Price
4
^^ Reinvested = no tax
Shown is Brij Consulting Portfolio Method
Year 1
8/13/2020 Brij Consulting 9

10. Use of Corporate Modeling to Define Plan
8/13/2020 Brij Consulting 10

11. Potential
Ark
Economy
Demand will Increase Labor 22 x on
a Digital Based Platform
We are saying it is a
replacement economy= see next slide 8/13/2020 Brij Consulting 11

12. Market Burden Market Scale Demand Rate Equity in Product
1.56 9.792651411 15.93029921 11%
8/13/2020
Brij Consulting
12

13. This high impact reflects the strong influence technology has in today’s economy,
an influence likely to grow in the future. This is structured as follows:
a. in General Terms the Methodology
b. in Total jobs and economic impact attributable to physics- based sectors
c. in Value added (GDP) and in Gross output (turnover) of physics-based sectors
d. in Industrial physics as a driver for manufacturing
e. in Industrial physics as a driver of productivity
f. in Physics-based exports
g. in Emergent physics-based industry as a positive disruptive economic force
h. in Industrial physics as a continuing catalyst for future growth
i. in Entrepreneurship in physics
j. in New industrial physicists (and Engineering of Physics based Applications)
Taken from “The Impact of Industrial Physics on the U.S. Economy” American Physical Society, January
2019,https://www.aps.org/programs/industrial/upload/APS-Report-Economic-Impact-of-Industrial-Physics.pdf
8/13/2020 Brij Consulting 13

14. Research Sample
• To design their meta lens, Bassett, Huang and Grote had to assemble a team with a diverse
array of knowledge, from quantum mechanics to electrical engineering to nanotechnology.
Bassett credits the Singh Center for Nanotechnology as playing a critical role in their ability to
physically construct the meta lens. University of Pennsylvania. "Engineers design
nanostructured diamond meta lens for compact quantum technologies." ScienceDaily.
ScienceDaily, 11 June 2019. <www.sciencedaily.com/releases/2019/06/190611145159.htm>.
y = 8.7667x - 5.1667
R² = 0.9346
0
10
20
30
40
50
60
70
80
10/8/2018 3/29/2019 3/29/2019 6/4/2019 6/11/2019 2/6/2020 3/16/2020 6/3/2020 6/22/2020
polymers thermal
reduction
kinetic
energy
quasi
particles
meta lens optical
platform
attribute
predication
transport wave glass
Timeline of Discoveries
Rating Ranking Score Linear (Score)
8/13/2020 Brij Consulting 14

15. Physics Analysis
MARKET
ANALYSIS
TECHNICAL
ANALYSIS
FINANCIAL
ANALYSIS
ECONOMIC
ANALYSIS
ECOLOGICAL
ANALYSIS
Advanced Methods
Prospects in Current
Science
Product Concepts
Comparative Data with
Leading Studies
Demand Driven
Economics
Enabling Green
Engineering
-20000
0
20000
40000
60000
GRID 6
Instance
1
Instance
2
Instance
3
8/13/2020 Brij Consulting 15

16. Resource Information
• New research from Professor Feng Li, Chair of Information Management at City's Business School
has outlined three new approaches that digital innovators can take to reduce the risk of failure and
seize competitive advantage in the industry.
With the coronavirus pandemic forcing many organizations to operate remotely, adoption of the
latest secure technologies has taken on greater importance for many industries -- presenting great
opportunities for providers of these technologies, but also great challenges of meeting demand,
staying ahead of competition and surviving in a fast-moving environment.
Professor Li interviewed senior leaders at eight global digital champions including Amazon, VMWare,
Slack, Alibaba and Baidu to find out what their strategies were for innovation.
The findings can be summarized into three main approaches that are emerging:
Innovation by experimentation: a continual process of developing ideas on a small scale without high
upfront investment, and then leveraging and rapidly scaling up those that turn out to be successful.
Radical transformation through incremental approaches: breaking up large scale projects into
strategic investments with measuring capability at each stage allows companies to radically innovate
several projects at once in small steps. This method also mitigates the risk of a single large project
failing and allows businesses to judge which projects will yield the highest returns or biggest impact
on investment.
Dynamic sustainable advantages through portfolios of temporary advantages: due to the fast-paced
nature of the digital economy, competitive advantages are often short-lived. Implementing a
strategy for successive and incremental temporary advantages can yield significant long-term gains.
All three strategies use elements of diversification and portfolio management to mitigate costs of
failure, as is often seen in investor portfolios.
Https://www.sciencedaily.com/rel.../2020/07/200728113511.htm
The New Mathematics of Making
Digital computation has freed designers from the constraints
of the static 2- and 3- dimensional representational techniques
of drawing and physical modelling. Design attributes can be
directly linked to extraneous factors: structural or
environmental optimization, or fabrication and material
constraints. Mathematical design models contain sufficient
information even for computer numerical controlled (CNC)
fabrication machines and techniques. Jane Burry, Director of
the Spatial Information Architecture Laboratory at RMIT
University in Melbourne, Australia, explores how these
opportunities for automation, optimization, variation, mass-
customization, and quality control can be fully realized in the
built environment within full scale construction. ...ETH
Zurich/Swiss Federal Institute of Technology. "Digital
fabrication in architecture: The challenge to transform the
building industry." ScienceDaily. ScienceDaily, 17 February
2017.
<www.sciencedaily.com/releases/2017/02/170217160931.htm
>.
Virtual Glass: best strategy for both
long-term and short-run projects
8/13/2020 Brij Consulting 16

17. More
Modeling…
• We need to apply the Ark
Products to the DIGITAL Model
• In Emulating the Digital Map we
discover how the production of
various forms of these products
need to work
• Then we can project better how
much the economy will improve
in U. S.
We will present more info here…
Since the Framework will be world scope
our emulation will only be a portion of it
https://www.slideshare.net/
Marshallja/presentations
8/13/2020 Brij Consulting 17