Steps in Cleaning Floors Using Vinegar and White Vinegar for Laminate Floors
1. Steps in Cleaning Floors
Using Vinegar and White
Vinegar for Laminate
Floors
VacuumCleanerReviewss.com
2. Introduction
Cleaning the floor using white vinegar
is the best alternative for harmful
chemical cleaners. For laminate type of
floors, damp cleaning is required
because the board will warp water
easily and will cause it to buckle.
3. That is why white vinegar (diluted) is
the ideal cleaning agent for laminate
floors because it can easily remove
stains and dirt off the floor.
Furthermore, white vinegar solutions
will also turn dull looking floor into
shiny and lustrous laminate flooring.
4. To Apply White Vinegar To
Laminate Flooring Here Are
The Steps That You Need To
Follow:
5. Steps One
Prepare a 32 ounce spray bottle and
fill it with one-fourth cup white
vinegar. Fill the rest of the bottle
with water and shake to mix.
6. Steps Two
Wipe the floor with dust mop to
remove dust particles and dirt out of
the floor.
7. Steps Three
For every 3x3 foot area of the
floor, spray it with vinegar. Do this
by starting at the far end of the room
and moving towards the door step.
8. Steps Four
On ever area that you spray the
vinegar, wipe it with a clean damp
mop to remove the vinegar together
with the dirt.
10. Steps Six
After you have wiped all the area of
the floor, wipe it dry with a clean
rag.
11. Except for marble floors, vinegar
solution can also clean hardwood
floors, tiles vinyl and other type of hard
surface floors. To clean these types of
floors, simply follow the steps below:
12. Steps One
To start, mop the floor with water to
remove dust and dirt on the surface
of the floor.
13. Steps Two
Mix 3 cups of vinegar with 1 gallon of
warm water into a bucket and mix
the solution well.
14. Steps Three
Mop the floor again but this time
damp the mop with your vinegar and
water solution.
15. Steps Four
After you mopping the entire floor
with the vinegar solution, rinse the
mop and bucket with pure water and
fill the bucket again with warm tap
water.
16. Steps Five
Let your floor dry afterwards. If it’s
suitable for the type of floor you
have, apply wax polish to make it
even more shiny and sparkling.
17. After applying the vinegar
solution and when rinsing the
vinegar off your floor, see to it
that you will not use wet the floor
too much. Too much water on the
mop will spread the vinegar
rather than remove it from the
floor.
VacuumCleanerReviewss.com