We offer solutions to your everyday working environment needs - pls call Arch. Cristina Ang for queries DL (632) 8663788 / Office(632) 6409260 / 6409826 Fax (632)643-5800.
2. 22
Ⅰ 、 Company profile
Ⅱ 、 Timc introduction
Ⅲ 、 Timc characteristics
Ⅳ 、 Timc application
Ⅴ 、 Company standard
Ⅵ 、 Test data
Ⅶ 、 Performance comparison
Ⅷ 、 Timc construction process
Catalogue
3. 33
ⅠⅠ 、、 Company profileCompany profile
NEO PRODUCTS (Qingdao) CO., LTD. is an overseas-funded enterprises with advanced
material technology and related researching, production, sales and services business.
M neo researching institute have more than 10 foreign specialists and engineers with
multinomial independent intellectual property and patents.
Timc is an original coating technology of M NEO which have been certified by all the
international and domestic authentication, and widely applied to building, energy, vehicle,
kitchen ware protection fields.
4. 44
Timc is an artificially synthesized material, which have both ceramic and rare
earth element properties. It is a nontoxic coating product with corrosion
resistance, high temperature resistance, good flexibility, self-cleaning and
antistatic characteristics. As a creation from a new compound technology, it can
be solidified at room temperature.
Timc is mainly composed from TiO2, silica solution and rare earth elements,
through a series of condensation , hydrolysis reactions , this new material
possess the advantages of both organic and inorganic properties.
It is believed that Timc will opening a new safe , clean and environmental
friendly world.
ⅡⅡ 、、 Product introductionProduct introduction
5. 55
Ⅲ 、 Timc characteristics
1 、 Acid/base resistance
Timc is a semipermanent material which can keep a
good performance under long term use.
The water absorption rate of Timc is under 0.03% ,
Timc can resistant chemical corrosion like 20%
H2SO4 、 HNO3 、 20%Na2CO3 , for 24 without
property change.
3 、 Salt mist tolerance
Timc can resistant high temperature under
500-1100℃ , and its A1 level fire proof material 。
High temperature resistance test
The unique Si-O bond makes Timc high resistant
againest salt Mist and sea water.
4 、 Durable
5 、 Antiseep
2 、 High temperature resistance
6. 66
Timc can be constructed directly underwater without any
pollution to the water.
6 、 Underwater construction
9 、 Colorful
The pigments of Timc are all
mineral materials , which
are both colorful and
behaving good.
7 、 Flexiable
a 0.4mm thick steel plane with Timc coating on
top can be folded optionally.
8 、 High hardness
The hardness of Timc coating can be 5H high.
10 、 Antistatic
The specific antistatic Timc product can well applied as
petroleum transportation and storage facility coating.
8. 88
Ⅳ 、 Timc application
Timc coating is nontoxic , corrosion resistant , high temperature tolerance ,
nonflammable , therefore it can be applied to moist tunnel , air-raid shelter ,
coast defence facilities.
Normally the coating products in these areas are always criticized of their toxic
smell and bad quality. Timc can keep a good performance in a salted or humid
environment , and its self- clean property can largely decrease the maintenance
cost. Besides Timc is a A1 level fire proof coating product with a antistatic
property.
9. 9
Timc wood protection product
Timc wood protection product is a great breakthrough of coating
products.
1. Do not contain of methanol, benzene , or diethyl ether 。
2. Glossy, hard ( 3-5H ) and wear-resisting
3. High temperature tolerant, fireproofing so as to prevent furniture
from heating and hot burning.
With Timc, we can finally not afraid of toxic
coating and leave the leukemia far away
from our life !
9
11. 1111
Workshop terrace
Chemical factory terrace
Timc Terrace Products
Timc terrace products can well
composite with concrete base and protect
it , so Timc can widely used for chemical
factory ground, mill floor and other
concrete ground.
◆Harden the concrete surface so
that to protect it from scratch .
◆Increase its density so as to proof
water permeate.
◆Antibiosis, nontoxic, and A1 level
fire proof.
◆Self-clean, easy to maintenance.
12. 1212
Timc Ocean Products Typical Cases
Ocean environment is full of salt mist, seawater, and ultraviolet, which is heavily corrosive.
Timc ocean products are specifically designed to apply in this condition with 3-5 times
longer service life than the normal coating and eco-friendly property.
18. 1818
Ⅴ 、 Company standard
items Method Result
Pencil hardness 1kgf , 10mm , 5 times repeat 2-5H
Adhesiveness lattice method , 10×10mm , 100/100 fine
Shock resistance 50 cm normal
Salt resistance artificial sea water immerse ( 27±6℃ ) / 500 h normal
Heat resistance 98±2℃ / 2h immerse normal
Solvent resistance
dimethylbenzene, MIBK, CH3COCH2CH3 / 24h
immerse
normal
Acid resistance 35%HNO3 /24h immerse normal
Acid resistance 98% H2SO4 / 24 h immerse lightly
discorloration
Alkalinity resistance 20% Na2CO3 / 24 h immerse normal
Time resistance QUV / 4000 h normal
Stain resistance
black , green , red
oiliness dye pollution for 24h , then wipe off by IPA
normal
Temperature change
resisitance
300℃ ⇔ 10℃, 5times normal
19. 1919
Ⅵ 、 Test data
表 1
No. item result standard note
1 adhension 0
level ( 100/1
00 )
KS MISO2429:2033 The best
2 Surface
hardness
5H KS 0 6711-97
AAMA2605-2011
3 Impact
resistance
No cracking 50CM ,500G
4 Salt mist
resistance
1000 h
No change
KS D 6711-92
5 Far infrared
release
Emission rate
0.915
Emission
energy
3.69*10°
Comparison between FT-IR
SPECTROMETER
And BLACK BODY
6 Antibiosis Bacteria
decrease
98.7%
KICM-FIR-1003
7 Insulating
property
2.6*106
1.0*106
8 negative ion 2735 ION/cc KICM-FIR-1042
9 Heat
resistance
normal KS M 5000:2009
500C°2 h
3200 past for a℃
military customized
product
10 Soiling
resistance
normal KS M 3802:2003
20. 2020
表 2
No. item result standard note
11 Boil water
tolorance
normal KS M 2812-1:2007
12 Heavy
metal
Non IEC-62321
Pb 、 Cr 、 Hg 、 C
d
13 nontoxic pass VOC not detected
14 nontoxic pass LFGB
15 Impact
resistance
pass GB/T 1732-1993
16 Salt water
resistance
normal GB/T 10834-2008
500 h
17 Acid
resistance
normal 98%H2SO4
35% HNO3
36.5% HCl
24 h
AAMA2605-2011
1000 times
of AAMA
standard
America
18 Base
resistance
normal 20%Na2CO3
24 h
19 Nonflam A1 GB 8624-2005 Best level
21. 21
Adhesive force comparison ( Timc and epoxy )
( drawing test )
21
ⅦⅦ 、、 Performance comparisonPerformance comparison
23. 2323
ⅧⅧ 、、 Timc construction process
Step one
Base
clean and
treatment
Step two
Primer
Step three
Top coat
Step four
Air drying
( 24 h )
or heating at
150 ℃
NEO Products (Qingdao) CO., LTD.
Arch. Cristina Ang / DL 8663788
+639228268613 / +639177926322