Weitere ähnliche Inhalte Ähnlich wie High Availability og virtualisering, IBM Power Event (20) Mehr von IBM Danmark (20) Kürzlich hochgeladen (20) High Availability og virtualisering, IBM Power Event1. IBM Power Systems
High Availability Considerations
IBM i
Erik Rex
Cert Consultant Specialist
IBM Danmark aps
rex@dk.ibm.com
© 2012 IBM Corporation
2. Downtime
Causes Of Downtime Solution Required
Disaster
Recovery
High
Availability
Downtime refers to a period of time or a (Continuous
percentage of a time span that a machine
or system (usually a computer server) is
Operations)
offline or not functioning, usually as a
result of either system failure (such as a
crash or routine maintenance.
Source: IBM HA Presentation,
Eric Hess, April 2001 * ‘HA’ generally refers to solutions that provide BOTH recovery and availability. Not
all technologies provide a solution for BOTH…iTera 5.0 HA does
Reliability is not the same as Availability!
2 © 2012 IBM Corporation
3. Business Continuity is:
Capability of a business to withstand outages and operate
mission critical services normally and without interruption per
a pre-defined Service Level Agreement
– Solution must address data, operational environment, applications,
the application hosting environment, and the end user interface
– Requires a collection of services, software, hardware, and procedures
to be selected, described in a documented plan, implemented, and
practiced regularly
Includes both Disaster Recovery (DR) and High Availability
(HA)
– DR addresses the set of resources, plans, services and procedures to
recover and resume mission critical applications at a remote site in the
event of a disaster
– HA defined as the ability to withstand all outages (planned,
unplanned, and disasters) and to provide continuous processing for all
mission critical applications
3 © 2012 IBM Corporation
4. What is a Service Level Agreement (SLA)?
General:
– Contractual service commitment.
– A document that describes the minimum performance criteria a provider
promises to meet while delivering a service.
– Typically also sets out the remedial action and any penalties that will take
effect if performance falls below the promised standard.
Relative to Availability:
– Commitment to the business describing the level of availability for IT services
that support critical business solutions.
– Addresses when IT services are expected to be fully operational, when they
may be running degraded, and when they won’t be available
– Driven primarily be importance of IT services in providing business solutions,
cost factors, and realism.
Many factors involved
4 © 2012 IBM Corporation
5. Application Resilience
Combine with Data Resilience for complete solution
Fully transparent
• Full resilience with automatic restart & transparent failover
• Users repositioned to last committed transaction
• No data loss, no sign-on required, no perceived loss of server;
HA enabled
only delay in response applications
and iSeries
Semi-transparent: Huh?
Did Clusters
• Automatic application restart & recovery to last transaction boundary something
happen?
• The resilient data & the application restart point match exactly
iSeries
Semi-automatic: Clusters
• Automatic application restart & recovery to some architected Checkpoint restart.
Data
application “restart” point Not too bad . resiliency
• Normally consistent with state of data, but user may have to
manually match application to position of data
Single
Server
Basic application failover: Start over.
• Automatic application restart after outage Where's all my work?
• User manually repositions within application
No application recovery:
• Users manually restart application with resilient data
• User determines where to resume work
5 © 2012 IBM Corporation
6. The Fundamentals
Recovery or Continuity ?
Clustering
Application Resiliency
Data Resiliency – IASPs, Replication
Transaction Integrity - Journaling
Data Protection - Raid 5 & Mirroring
Data Replication alone is not sufficient for HA
Clustering, Automation and application resiliency completes the equation
6 © 2012 IBM Corporation
7. Clustering for HA/DR
Clustering is the default deployment for
HA/DR in the mainframe and Unix
marketplace
With PowerHA SystemMirror, clustering is
available to our IBM i customers
Provides for automated failover – minimal
IT operations involvement
Planned and unplanned outage
management
7 © 2012 IBM Corporation
8. Clustering
Data Application
Resiliency Resiliency
A property of the Operating
Replication High
System and Cluster availability
Switched Management cluster
Provides the logical connections IASPs enabled
iSeries Navigator
between resilient data groups or partner products applications
Can enable the automation of APIs
physical and logical switching Cluster Resource Services
Can enable a resilient application Base IBM i cluster functions from IBM
to be “switched”, activated and Heart beating
repositioned to a defined state IP Address Takeover
Enables the automatic sequencing Reliable internal cluster communications
of events that bring the user, Switchover administration
application and data to a coherent Distributed activities
production state automatically
Application design is the primary
limiting factor
8 © 2012 IBM Corporation
9. Data Resilience Technologies
Logical Replication
– Business partner software product
•Vision Solution, Quick EDD, iCluster
Switchable Device
– Switchable IASPs
Operating System Storage
Management based Replication
– PowerHA System Mirror Cross-Site
Mirroring (XSM) with Geographic
Mirroring
SAN Storage Server based
Replication
– SAN Metro/Global Mirror used with
PowerHA IBM I Advanced Copy
Service toolkit
9 © 2012 IBM Corporation
10. Logical Replication
Second copy of data is generated logically identical Backup
(target system)
to first
Tape
Replication done on object basis (file, member, data
area, program, etc.) near real-time
Normally done via a business partner software
product
10 © 2012 IBM Corporation
11. Logical Replication Backup
(target system)
Tape
Widely deployed data resiliency topology for Power IBM i
– Typically deployed via an HA Business Partner solution package
– Replication done on object basis (file, data area, program, etc.) near real-time
• Done at the lowest unit of change for the object, e.g. record level for database files
• Otherwise, done on entire object when change detected by replication software
• Solution Packages can use IBM i Remote Journaling as efficient, reliable transport
mechanism.
Benefits:
– Rapid activation of production environment on backup server via role-swap operation
– Replicated data can be concurrently accessed for backups or other read-only apps
– Minimal recovery is needed when switching over to the backup copy
Considerations:
– Complexity of setup and maintenance
– Modification of ‘live’ copies of objects on backup server
– Lag time between changes on source being available on backup server
– Consistency between journaled and non-journaled objects
11 © 2012 IBM Corporation
12. Switchable IASPs
Independent Auxiliary Storage Pools (IASPs)
– IBM i Option 41 - High Availability Switchable Resources
– Switch disks from one system to another
Benefits:
– Simplicity
– Data is always current (no copy to synchronize)
– No in-flight data to lose
– Minimal performance overhead
– Supports integrated environments (Windows, Linux)
as well as IBM i
Considerations:
– Setup DASD configuration, data, and application structure
– Single copy of data (mirroring recommended to protect data, reduce SPOFs)
– No concurrent access from both hosts
– HW restrictions (distance, conc maint)
12 © 2012 IBM Corporation
13. Switchable Devices
PowerHA Basic Concepts (for IBM i clients)
Admin domain
(IASP)
aka (volume group)
Application data
The underlying data resiliency is not based on replication it is based on a pool of disk which is
shared and switchable between nodes in the cluster
PowerHA SystemMirror enables the cluster nodes to behave as resource for the applications in
the event of an outage
Admin Domain takes care of the sysbas data
13 © 2012 IBM Corporation
14. PowerHA Standard Edition Switchable LUNs
*SYSBAS
(DR)
F (IASP)
S
Primary l S
Secondary
e e
s a s
s
h
C
IASP
o Flash
Flash
p Backup
Backup
y *SYBAS
(Backup I)
POWER7 POWER7
IBM i DS8000 IBM i
©
Non disruptive
backups
Data Centre
14 © 2012 IBM Corporation
15. PowerHA SystemMirror Strategy
Deep Integration
– Cluster Aware IBM i
– SLIC based event processing
– Centralize cluster topology management
Ease of deployment & ease of use
– System Director Navigator management
– Discovery based deployment
– Cluster wide security
Multi-Site & Disaster Recovery
– Differentiate with IBM storage
– Integrated IBM copy services
Solution Package Optimization
– Standard Edition, Enterprise Editions
15 © 2012 IBM Corporation
16. PowerHA SystemMirror
(Cross-Site Mirroring) (XSM) with Geographic Mirroring
Second copy of data in an IASP is generated logically identical to first
Changes to production IASP replicated to second copy of IASP thru another system
Operating system storage management based replication solution
Primary
(source system)
Backup
(target system)
Production
Data
Backup
Mirror
Copy
16 © 2012 IBM Corporation
17. PowerHA
Cross-Site Mirroring (XSM) with Geographic Mirroring
Mirroring of IASP data via IBM i storage management to a second server
– XSM Included in Option 41 of OS
– Enables switching or automatic failover to mirrored copy of IASP
Primary
(source system)
Benefits:
– Same as switched device Production
Backup
(target system)
Data
– Two copies of IASP data
– Can be local or remote (Sync or Async) Backup
Mirror
– Ease of deployment and operation Copy
– Supports integrated environments (Windows, Linux)
as well as IBM i Client partitions
– Heartbeat monitoring with automate failover or manual switchover
Considerations:
– Performance impacts of synchronous operation, distance, bandwidth, latency
– Mirror copy cannot be concurrently access
– Lengthy full data re-synchronization
17 © 2012 IBM Corporation
18. PowerHA Basic Concepts
Admin domain
Geomirror
Internal disk is not switchable (LUNs required), you use geomirror with internal disk configurations
18 © 2012 IBM Corporation
19. PowerHA Metro/Global Mirror with IBM i Advanced Copy Services toolkit
Replication of iASP data at storage controller level to Backup SAN using Metro
or Global Mirror
– Metro or Global Mirror generates a second copy of the IASP on another Storage
server
– Toolkit part of Power IBM i Advanced Copy Services for IBM i offering
– Combines Metro/Global Mirror, PowerHA, IASP, and IBM i cluster services
– Coordinated switchover/failover
Benefits:
iSeries Cluster
– Remote copy and coordinated switching without an IPL and Device
Dom ain
– Can combine with FlashCopy for backup window reduction
Considerations:
– Performance impacts of synchronous mode: distance, bandwidth, latency
– Mirror copy cannot be concurrently accessed
– Asynchronous mode requires IBM SAN Global Mirror
– Requires tools and services to deploy
19 © 2012 IBM Corporation
20. PowerHA Enterprise Edition Two Node Cluster
Admin domain
*SYSBAS
*SYSBAS (DR)
(Prod) Metro Mirror
POWER7
IBM i
F IASP
IASP
(Switchable) Global Mirror l
HA
DR
a
s
h
C
IASP
DR
HA o
Flash
p Backup
y *SYBAS
(Backup I)
POWER7 POWER7
IBM i DS8000 DS8000 IBM i
Production SVC* SVC
Storewize V7000* Storewize V7000 ©
Local Site DR Site
* Initially available English only via prpq 5799 HAS
20 © 2012 IBM Corporation
21. PowerHA Enterprise Edition Three Node Cluster
DR Site
LUN
Group
(active)
Production
Admin domain
*SYSBAS
*SYSBAS (DR)
(Prod) MetroMirror
POWER7
IBM i
F IASP
IASP
(Switchable) Global Mirror l
DR
a
s
h
C
IASP
HA o
Flash
p Backup
*SYBAS y *SYBAS
(Backup I) (Backup I)
POWER7 POWER7
IBM i DS8000 DS8000 IBM i
SVC* SVC*
Storewize V7000* Storewize V7000* ©
Local Site DR Site
21 © 2012 IBM Corporation
22. Redundant VIOS I/O Virtualization
Redundant VIOS partitions provide
VIOS VIOS
two paths to attached SAN storage
– AIX, i, and Linux partitions
Power Hypervisor
– One set of disk
– Client partitions use MPIO
Redundant VIOS partitions
provide access to mirrored SAN VIOS VIOS
storage
– AIX, i, and Linux partitions Power Hypervisor
– Mirrored set of disk
– Mirroring done by client
partitions (e.g., IBM i)
Note: Redundant VIOS partitions are not supported on BladeCenter JS12, JS22, JS23, and JS43
22 © 2012 IBM Corporation
23. PowerVM can Help Manage Risk
Business and IT security and resiliency are as critical as ever, and must be
dynamic and intelligent in order to match the speed of business change
PowerVM Live Partition Mobility
– Move running IBM I, AIX and Linux partitions between systems
– Using VIOS
Virtualized SAN and Network Infrastructure
Virtualized SAN and Network Infrastructure
√ Eliminate planned outages and balance workloads across systems
23 © 2012 IBM Corporation
24. IBM i Capacity Back Up (CBU) Licensing Example
Planning
CBU allows PowerHA licenses Production CBU
entitlement fail-over from the registered Partition #1
production server
Unused
– Minimum 1 entitlement required on
the CBU box
– CBU server allows the temporary
transfer of entitlements from primary
server for non concurrent usage on
the CBU server
– Round-up when using partial
processors
– 3.5 processors = 4 entitlements Partition #2
Example Active standby
No HA/DR required for Partition 1 CBU Cores
– No PowerHA licenses
HA required for Partition 2 and 3
– All processors in the production
server partitions 2 and 3 are
licensed for PowerHA Partition #3
– One key, 8 entitlements
– The license key will be a permanent Active standby
key installed on partition 2 and 3 CBU Cores
A single processor is licensed on the
CBU server
– One key, one entitlement IBM i, 5250, PowerHA
– The license key will be a temporary
key for 8 cores good for two years
24 installed on partitions 2 and 3 © 2012 IBM Corporation
25. Key Solutions Comparison Characteristics
1. Primary use 8. Number of Backup systems
2. Characteristic of Replication 9. Number of Data copies allowed
Mechanism
10. Cost Factors
3. Recovery Time
11. End User
4. Recovery Point
12. Outage coverage
5. Ordering of changes
13. Cluster controlled resource
6. Concurrent access
14. Risks
7. Geographic dispersion
Consider other decision factors
25 © 2012 IBM Corporation
26. Applicability of Solution to Problem Set
Start to determine possible matches of technologies to specific needs
1. Initial analysis to eliminate technologies that do not fit
2. After initial analysis, perform detailed analysis of complete requirement sets against
specific characteristics of each technology
Data Resilience Technologies
Logical Switched disk PowerHA PowerHA with
replication Copy Services
toolkit
Backup Window
Business Continuity
n/a
Reduction
Requirement
Planned
Maintenance
Recovery for
n/a
disaster outage
HA for unplanned
outage
Workload
n/a n/a n/a
Balancing
26 © 2012 IBM Corporation
27. Conclusions
When to consider Logical Replication?
– Need two or more copies of the data
– Want some level of concurrent access to second data copy
– Need backup window reduction
– Already have solution deployed using logical object replication
– Need a solution that has no special hardware configuration requirements
– Transaction level integrity is important for all journaled objects
When to consider Switchable IASPs ?
– Single copy of data meets requirements; addressed exposure to disk subsys failures
– Need a very simple, low cost, low maintenance solution
– No need for DR solution
– Source and target system will be at the same site
– Want consistent fail/switchover times within minutes independent of transaction volumes
– Need transaction level integrity for all objects; no loss of in-flight data
– Need highest throughput environment
– Need multiple, independent databases that can be moved between systems
27 © 2012 IBM Corporation
28. Conclusions (2)
When to consider PowerHA System Mirror (Cross-Site Mirroring) ?
– Want a system-generated second copy of the data (at an IASP level)
– Need two copies of data, but do not need concurrent access to second copy
– Want relatively low cost, low maintenance solution, but also need disaster
recovery
– Want consistent fail/switchover times within minutes independent of transaction
volumes
When to consider PowerHA Metro/Global Mirror with IASP and Toolkit ?
– Want storage based solution for HA; especially if multiple platforms are involved
– Want consistent fail/switchover times within minutes independent of transaction
volumes
– Need two copies of data, but do not need concurrent access to second copy
28 © 2012 IBM Corporation
29. Conclusions (3)
When to consider a combination solution?
– When no single solution meets all of your business
continuity requirements
29 © 2012 IBM Corporation
31. Summary:
Data Application
Clustering PLUS Resiliency Resiliency
Data replication PLUS Replication
and Cluster
High
availability
Switched cluster
Cluster enabled replication IASPs
Management
iSeries Navigator enabled
or partner products applications
EQUALS ’real’ HA
APIs
Cluster Resource Services
Base IBM i cluster functions from IBM
Heart beating
Data Replication alone is not sufficient for IP Address Takeover
HA Reliable internal cluster communications
Switchover administration
Clustering, Automation and application Distributed activities
resiliency completes the equation
31 © 2012 IBM Corporation
32. PowerHA Global/Metro
PowerHA w/ Geographic Mirror w/ IASP
Logical Replication Switchable IASPs
Mirroring
& iTC Toolkit
Primary use HA (including DR) HA (no DR) HA (including DR) HA (including DR)
Object based replication; No replication; Page level replication as Sector level replication of
changes at record or 1 copy of data that is controlled by operating all pages written to disk.
object level based on data switchable between system based on storage
Characteristic & audit journal. systems management writes. Physical copy of an IASP
of replication based on disk I/O (cache
mechanism Logical copy of object Logical copy since based).
level changes for selected physical DASD configs
objects. can differ.
Apply lag + replication IASP Vary on IASP vary on IASP vary on
switchover overhead.
Recovery Journal settings SMAPP / Journal settings SMAPP / Journal settings SMAPP / Journal settings
Time
Considera- No IPL required No IPL required No IPL required
tions No IPL required
Minutes Minutes Minutes
Minutes
Transaction boundary Transaction boundary Transaction boundary Transaction boundary
with commitment control. with commitment with commitment control. with commitment control.
Recovery Mixed – audit and data control. Last data written to IASP. Last data written to IASP.
Point journal. Data / objects Last data written to IASP.
Considera- sent to target will be
tions recovered. Lose changes Objects not in IASP. Objects not in IASP.
not xmitted (zero data loss Objects not in IASP.
32 with synch remote jrn). © 2012 IBM Corporation
33. PowerHA Metro/Global
PowerHA w/ Mirror w/ IASP
Logical Replication Switchable IASPs
Geographic Mirroring
& iTC Toolkit
Based on journal Ordering preserved Ordering at system Ordering at controller
receiver content & level. Ordering level. Preserved at
Ordering HABP ability to preserved across LUN (disk) level for
of synchronize changes ASP group. Metro Mirror.
changes from data & audit Consistency groups
journals. for Global Mirror.
Typically read only, No concurrent No concurrent access No concurrent
possibly shared data. access since no . access.
Always some lag time copy of data Copy current with
Concurre in data currency. Flash Copy.
nt access Remote Journal Consistency groups
helps. define lag time for
Global Mirror.
Geo Virtually unlimited Limited (250 M) Virtually unlimited Virtually unlimited
Dispersio
n
# Back 1<= n <127 n=1 1<= n <=3 1<=n<=2
up (or BP max) (with switchable (2 or 3 with (2 with cascading
systems towers) switchable towers) Metro Mirror)
# data 127 (or BP max) none 1 2
33 © 2012 IBM Corporation
copies
34. PowerHA w/ PowerHA Metro/Global
Logical Replication Switchable IASPs Geographic Mirroring Mirror w/ IASP
& iTC Toolkit
Any DASD Switchable tower (or Any (flexible) DASD Ext DASD
configuration. HABP IOP) configuration. 57xx-HAS
Cost software. Bandwidth. IBM i Option 41 57xx-HAS Bandwidth.
Factors Duplicate disks. Bandwidth. Duplicate Toolkit. Duplicate
disks. disks.
Replication overhead. Can automatically Geographic mirroring Metro/Global Mirror
End User Can automatically restart application. overhead. overhead.
Disruption restart application. Can automatically Can automatically
restart application. restart application.
Planned, unplanned, Planned, unplanned Planned, unplanned, Planned, unplanned,
Outage disaster, save window disaster, save window disaster, save window
coverage
Cluster Yes Yes Yes Yes – of switchable
control devices
Loss of in flight data. Disk subsystem is Asynch case: can lose Somewhat complex
Mismatch of data single point of copy on double failure Asynch via Global
levels for various failure, therefore no if cannot quiesce & vary- Mirror.
protection against off.
Risks objects. Disk protection
catastrophic disk Resynch after detach
Monitoring logical provided by Ext.
failure may yield lengthy
object replication Storage.
unprotected condition.
34 environment © 2012 IBM Corporation
35. PowerHA Webcast V1.0
PowerHA for IBM i Resources
PowerHA Website
– www.ibm.com/systems/power/software/availability/
PowerHA Options for IBM i - Introduction (incl. 7.1)
– http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/PRS4021
PowerHA and DS8000 Storage Integration on IBM i
– http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/PRS4361
Lab Services
– http://www-03.ibm.com/systems/services/labservices
Redbooks at www.redbooks.ibm.com
– PowerHA SystemMirror for IBM i Cook book - SG24-7994 (Jan 2012)
– Implementing PowerHA for IBM i - SG24-7405-00 (Nov 2008)
– Clustering and IASPs for Higher Availability - SG24-5194-01
– Independent ASPs: A Guide to Moving Applications to IASPs - SG24-6802-00
– Independent ASP Performance Study on the IBM iSeries - REDP-3771-00
– Implementing SAP Applications on the IBM System i with IBM i5/OS - SG24-7166-00
IBM System Storage Solutions for IBM i
– Course code: AS930, Duration: 4.0 days
– www-304.ibm.com/jct03001c/services/learning/ites.wss/us/en?pageType=course_description&courseCode=AS930
Is your ISV solution registered as ready for PowerHA?
– http://www-304.ibm.com/isv/tech/validation/power/index.html
High Availability Clusters (Power HA) and Independent Disk Pools for IBM i
– Course code: AS541,OS830 Duration: 4.0 days
– www-304.ibm.com/jct03001c/services/learning/ites.wss/us/en?pageType=course_description&courseCode=AS541
Risk Self Assessment:
– www.ibm.com/smarterplanet/us/en/business_resilience_management/overview/index.html?re=2brf24
35 © 2012 IBM Corporation
© Copyright IBM Corporation 2011
36. Special notices
This document was developed for IBM offerings in the United States as of the date of publication. IBM may not make these offerings available in
other countries, and the information is subject to change without notice. Consult your local IBM business contact for information on the IBM
offerings available in your area.
Information in this document concerning non-IBM products was obtained from the suppliers of these products or other public sources. Questions
on the capabilities of non-IBM products should be addressed to the suppliers of those products.
IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give
you any license to these patents. Send license inquires, in writing, to IBM Director of Licensing, IBM Corporation, New Castle Drive, Armonk, NY
10504-1785 USA.
All statements regarding IBM future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives
only.
The information contained in this document has not been submitted to any formal IBM test and is provided "AS IS" with no warranties or
guarantees either expressed or implied.
All examples cited or described in this document are presented as illustrations of the manner in which some IBM products can be used and the
results that may be achieved. Actual environmental costs and performance characteristics will vary depending on individual client configurations
and conditions.
IBM Global Financing offerings are provided through IBM Credit Corporation in the United States and other IBM subsidiaries and divisions
worldwide to qualified commercial and government clients. Rates are based on a client's credit rating, financing terms, offering type, equipment
type and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension or withdrawal
without notice.
IBM is not responsible for printing errors in this document that result in pricing or information inaccuracies.
All prices shown are IBM's United States suggested list prices and are subject to change without notice; reseller prices may vary.
IBM hardware products are manufactured from new parts, or new and serviceable used parts. Regardless, our warranty terms apply.
Any performance data contained in this document was determined in a controlled environment. Actual results may vary significantly and are
dependent on many factors including system hardware configuration and software design and configuration. Some measurements quoted in this
document may have been made on development-level systems. There is no guarantee these measurements will be the same on generally-
available systems. Some measurements quoted in this document may have been estimated through extrapolation. Users of this document
should verify the applicable data for their specific environment.
Revised September 26, 2006
36 © 2012 IBM Corporation
37. Special notices (cont.)
IBM, the IBM logo, ibm.com AIX, AIX (logo), AIX 5L, AIX 6 (logo), AS/400, BladeCenter, Blue Gene, ClusterProven, DB2, ESCON, i5/OS, i5/OS (logo), IBM Business
Partner (logo), IntelliStation, LoadLeveler, Lotus, Lotus Notes, Notes, Operating System/400, OS/400, PartnerLink, PartnerWorld, PowerPC, pSeries, Rational, RISC
System/6000, RS/6000, THINK, Tivoli, Tivoli (logo), Tivoli Management Environment, WebSphere, xSeries, z/OS, zSeries, Active Memory, Balanced Warehouse,
CacheFlow, Cool Blue, IBM Systems Director VMControl, pureScale, TurboCore, Chiphopper, Cloudscape, DB2 Universal Database, DS4000, DS6000, DS8000,
EnergyScale, Enterprise Workload Manager, General Parallel File System, , GPFS, HACMP, HACMP/6000, HASM, IBM Systems Director Active Energy Manager,
iSeries, Micro-Partitioning, POWER, PowerExecutive, PowerVM, PowerVM (logo), PowerHA, Power Architecture, Power Everywhere, Power Family, POWER Hypervisor,
Power Systems, Power Systems (logo), Power Systems Software, Power Systems Software (logo), POWER2, POWER3, POWER4, POWER4+, POWER5, POWER5+,
POWER6, POWER6+, POWER7, System i, System p, System p5, System Storage, System z, TME 10, Workload Partitions Manager and X-Architecture are trademarks
or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are
marked on their first occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.S. registered or common law trademarks owned by IBM at
the time this information was published. Such trademarks may also be registered or common law trademarks in other countries.
A full list of U.S. trademarks owned by IBM may be found at: http://www.ibm.com/legal/copytrade.shtml.
Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or
other countries.
AltiVec is a trademark of Freescale Semiconductor, Inc.
AMD Opteron is a trademark of Advanced Micro Devices, Inc.
InfiniBand, InfiniBand Trade Association and the InfiniBand design marks are trademarks and/or service marks of the InfiniBand Trade Association.
Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
IT Infrastructure Library is a registered trademark of the Central Computer and Telecommunications Agency which is now part of the Office of Government Commerce.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates.
Linear Tape-Open, LTO, the LTO Logo, Ultrium, and the Ultrium logo are trademarks of HP, IBM Corp. and Quantum in the U.S. and other countries.
Linux is a registered trademark of Linus Torvalds in the United States, other countries or both.
Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation in the United States, other countries or both.
NetBench is a registered trademark of Ziff Davis Media in the United States, other countries or both.
SPECint, SPECfp, SPECjbb, SPECweb, SPECjAppServer, SPEC OMP, SPECviewperf, SPECapc, SPEChpc, SPECjvm, SPECmail, SPECimap and SPECsfs are
trademarks of the Standard Performance Evaluation Corp (SPEC).
The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
TPC-C and TPC-H are trademarks of the Transaction Performance Processing Council (TPPC).
UNIX is a registered trademark of The Open Group in the United States, other countries or both.
Other company, product and service names may be trademarks or service marks of others.
Revised December 2, 2010
37 © 2012 IBM Corporation