StroNGER for HORIZON 2020

StroNGER for Horizon 2020

1/61
1/45
1/61

Structures of the Next Generation – Energy harvesting and Resilience
C. Crosti, S. Arangio, F. Petrini, K. Gkoumas, F. Bontempi

www.stronger2012.com


2/61
2/45
2/61

StroNGER:
presentation
and expertise


3/61
3/45
3/61

Stronger S.r.l. is a Spin-off Company (Small Medium Enterprise) that works as a
link between the Academia and the Industry in Civil and Environmental Engineering.
The Company offers high-profile tools and methodologies that lead to structures
that fulfill required performances under a resilience and sustainability point of
view.
With resilience it is intended the capacity of a system (intended as an aggregate of
interconnected elements such as structures and infrastructures) to resist negative
events (either of natural, accidental or exceptional origin), while at the same time, it
maintains an acceptable level of service and integrity and the capacity to reorganize
in an efficient manner.
With sustainability it is intended the requirement that leads to a rational use of
resources, direction of investments, technological and normative progress, with the
future needs of the society, as well as those current.

4/61
4/45
4/61

Our university research group and co-founders of StroNGER


LUCA
SGAMBI

STEFANIA
ARANGIO

LUISA
GIULIANI

SAURO
MANENTI

FRANCESCO
PETRINI

KONSTANTINOS
GKOUMAS

FRANCO
BONTEMPI
FILIPPO
GENTILI

CHIARA
CROSTI

FRANCESCA
BRANDO
PIERLUIGI
OLMATI
PAOLO E.
SEBASTIANI

info@stronger2012.com

Who we are: Chiara Crosti

5/61
5/45
5/61

Chiara Crosti

Civil Engineer, PhD in Structural Engineering

Education and milestones:


2011:
2008:
2007:

Sapienza University of Rome, PhD in Structural Engineering, Advisor
Prof. Franco Bontempi.
Member of the Engineering Chamber of Terni for Civil and
Environmental Engineering.
Civil Engineering Degree (Laurea), Major in Structural Engineering,
Advisor Prof. Franco Bontempi.

Experience:
2012-onwards:
2009-2011:

StroNGER srl, co-founder and CEO.
Guest Researcher at the National Institute of Standards and Technology
(NIST), Gaithersburg (MD), USA (22 months).

Research interests:
-

Performance Based Design of Complex Structures;
Forensic Engineering;
Fire Safety Engineering;
Structural Optimization and multi-hazard risk analysis;
Non-linear FEM analysis.


Who we are: Stefania Arangio

6/61
6/45
6/61

Stefania Arangio




2008:
2007:
2005:
2004:
2001:

California Institute of Technology (Pasadena, USA); visiting student (7
months), hosted by Prof. James L. Beck.
Member of the Engineering Chamber of Rome.
Laurea (5-year degree, equivalent with MEng + MSc), Major in Structural
Engineering, Advisor Prof. Franco Bontempi.
Universidad Politecnica de Catalunia (Barcelona); Erasmus (10 months).

Experience:
2012-onwards:
2008-2010:
2010:
2009:

StroNGER srl, co-founder and director.
Consiglio Nazionale delle Ricerche (CNR); Associate Researcher on
Geological Risk and Structural Damage in Urban Areas (3 years).
Guest Researcher at the National Institute of Standards and Technology (NIST),
Gaithersburg (MD), USA. (22 months).
City College of New York (New York, USA); visiting researcher (2 months).

Research interests:
-

Structural Identification and Structural Health Monitoring (SHM);
Forensic Engineering;
Structural safety and reliability;
Structural analysis and design.


Who we are: Francesco Petrini

7/61
7/45
7/61

Francesco Petrini




2009:

2006: Sapienza University of Rome, Research associate (1 year); scientific
advisor Prof. Franco Bontempi.
2005: Member of the Engineering Chamber of Rome.
2004: Sapienza University of Rome, Laurea (5-year degree, equivalent with
MEng + MSc), Major in Structural Engineering, Advisor Prof. Franco
Bontempi.

Experience:
2012-onwards:
2011:
2008-2010:
2009:

StroNGER srl, co-founder and member of the board.
National Technical University of Athens (Athens, Greece); visiting researcher
(2 months), hosted by Prof. Charis Gantes.
Sapienza University of Rome, Associate Researcher on Performance Based Wind
Engineering.
Louisiana State University (Baton Rouge, USA); visiting researcher (2 months),
hosted by Prof. M. Barbato.

Research interests:
-

Performance Based and Resilience Based Design;
Earthquake and Wind Engineering;
Energy Harvesting;
Structural Analysis and Design.


Who we are: Konstantinos Gkoumas

8/61
8/45
8/61

Konstantinos Gkoumas

Civil Engineer, PhD in Transportation and Infrastructures



2008:
2005:
2004:
2003:

Sapienza University of Rome, PhD in Transportation and Infrastructures,
Advisor Prof. Giuseppe Bellei.
Member of the Engineering Chamber of Greece.
Member of the Engineering Chamber of Rome.
Sapienza University of Rome, Laurea (5-year degree, equivalent with
MEng + MSc) in Civil Engineering, Major in Transportation Engineering,
Advisor Franco Bontempi.

Experience:
2012-onwards:
2012:
2011-onwards:
2010:
2009-2010:
2005-2007:

StroNGER srl, co-founder and partner.
University of Illinois at Urbana-Champaign; visiting researcher (1 month), hosted by
Professors Larry Bergman and Alex Vakakis.
Sapienza University of Rome, Associate Researcher on Energy Harvesting and
Dependability of Structures and Infrastructures.
Harbin Institute of Technology (Cina); visiting researcher (1 month), hosted by
Prof. H. Li.
Georg-August-Universität Göttingen (Germany); Post-doc.
Civil Engineer, Co.Re. Ingegneria S.r.l., Roma.

Research interests:
-

Energy Harvesting;
Dependability and structural robustness;
Transportation Engineering.


Who we are: Franco Bontempi

9/61
9/45
9/61

Franco Bontempi

Civil Engineer, PhD, Professor of Structural Analysis and Design



2003:
2000:
1993:
1988:

1990:

Sapienza University of Rome, Full Professor in Structural Analysis and
Design (ICAR09, ex H07B).
Sapienza University of Rome, Full Professor (supplementary) in
Structural Analysis and Design (ICAR09, ex H07B).
Politecnico di Milano, PhD in Structural Engineering, Advisor Prof. Fabio
Casciati.
Politecnico di Milano, Laurea (5-year degree, equivalent with MEng +
MSc) in Civil Engineering, Major in StructuralEngineering, Advisor Fabio
Casciati.
Member of the Engineering Chamber of Bozen.

Experience:
2012-onwards:
2004-2005:
2002-2005:

StroNGER srl, scientific director.
Member of the technical scientific committee for the revision of the Italian building
code (“Testo Unico delle Norme Tecniche per le Costruzioni dello Stato Italiano.
Member of the technical scientific committee for the Messina Strait Bridge focusing on
structural analysis and performance checks.
- Author of more than 200 journal and conference papers.
- Supervisor for 168 graduate and post-graduate Theses (8 ongoing).
- Supervisor for 14 Ph.D. Theses (4 ongoing).

Research interests:
-

Structural Analysis and Design;
Reliability Engineering.


Services and Products


10/61
10/45
10/61

1. Design and rehabilitation of Civil structures and
infrastructures with regard to wind, earthquakes, waves,
landslides, fire and explosions.
2. Disaster resilience assessment.
3. Advanced numerical modeling of Civil structures and
infrastructures.
4. Forensic engineering.
5. Sustainability and Energy Harvesting in Civil structures
and infrastructures.



11/61
11/45
11/61

Horizon 2020:
actions that fit
with StroNGER
expertise

The Horizon 2020 structure: three pylons programs and five transversal programs


12/61
12/45
12/61



13/61
13/45
13/61

The Horizon 2020 structure: actions that fit with the StroNGER expertise

Actions that fit with
StroNGER expertise

Design and rehabilitation of Civil structures and infrastructures with regard to wind,

1

earthquakes, waves, landslides, fire and explosions.
Disaster Resilience assessment

2

Advanced numerical modeling of Civil structures and infrastructures

3

Forensic engineering

4
5

Sustainability and Energy Harvesting in Civil structures and infrastructures


14/61
14/45 The Horizon 2020 structure: actions that fit with the StroNGER expertise – specific calls
14/61


ABSTRACT OF THE WORK PROGRAMME

The following technology-specific challenges have to be
addressed
in 2014:
Wind energy: Develop control strategies and innovative
substructure concepts - There is a need for i) control strategies
and systems for new and/or large rotors and wind farms (onand offshore); ii) new innovative substructure concepts,
including floating platforms, to reduce production, installation
and O&M costs for water depths of more than 50m.

Support Applicative
research for the
different purposes

In 2015:
Wind energy: Substantially reduce the costs of wind energy There is a need for innovative integrated dedicated offshore
systems (e.g. with a significant lower mass per unit power
installed) to reduce production, installation and O&M costs for
water depths of more than 50m.

earthquakes, waves, landslides, fire and explosions (wind turbines).


1

15/61
15/61


MG.8.1-2014. Smarter design, construction and
maintenance
- Advanced, quick, cost-effective and flexible (modular)
design, manufacturing, construction, maintenance,
rehabilitation and retrofitting systems/techniques and materials.
- Self-monitoring, self-reporting, non-intrusive inspection and
testing methods, including advanced predictive modelling.
MG.8.2-2014. Next generation transport infrastructure:
resource efficient, smarter and safer
- Energy harvesting infrastructure
- Methods for preventing disruption of critical infrastructure from
malicious acts
MG.8.4-2015. Smart governance, network resilience and
streamlined delivery of infrastructure innovation
- Solutions for advanced asset management, advanced
investment strategies and innovation governance, including
smart monitoring systems (such as Structural Health
Monitoring) and adequate indicators for cost and quality.

Support Applicative
research for the
different purposes
NOTE:
Effective integration of SMEs in
the value chain is strongly
recommended

Hot
NOTE:
SME active participation is
strongly encouraged

Advanced numerical modeling of Civil structures and infrastructures

3

Sustainability and Energy Harvesting , also for disaster resilience

5


16/61
16/61


DRS-7-2014: Crisis management topic 7: Crises and disaster
resilience – operationalizing resilience concepts
- the development of European Resilience Management
Guideline and demonstration through pilot implementation;
DRS-9-2014/2015: Disaster Resilience & Climate Change:…
b) Research and innovation actions [2014]
- Develop standardized methods to assess climate change
impacts, vulnerabilities, and risks, and to identify and assess the
performance of adaptation measures (technological and nontechnological options). Methods should focus on long-term
climate change and extreme events for European sectors of
particular socio-economic and environmental significance, paying
due consideration to uncertainty, and encompass indirect, crosssectorial effects and cascade impacts, if relevant.
- Provide state-of-the-art decision support tools tailored to
facilitate decision-making by different end-users (e.g. individuals,
businesses, private sector firms, local authorities, governments),
while developing adaptation plans and measures.

Support Applicative
research for the
different purposes

I


1


2

Disaster resilience assessment


17/61
17/61



DRS-11-2015: Disaster Resilience & Climate Change topic
3: Mitigating the impacts of climate change and natural
hazards on cultural heritage sites, structures and artefacts
- including aspects relating to innovative environmental
assessment methodologies, integrated monitoring
technologies and systems, improved non-invasive and nondestructive methods of surveying and diagnosis including
wide area surveillance, cost-effective conservation and
restoration techniques, risk management, disaster prevention
and quick damage assessment when catastrophes occur

Support Applicative
research for the
different purposes

II

1


Sustainability and Energy Harvesting , also for disaster resilience


5

18/61
18/61


DRS-13-2015: Critical Infrastructure Protection topic 2:
Demonstration activity on …
Comprehensive approach should be developed that take into
account the security issue from the conceptual design of any
building to its operation (in the case of a critical infrastructure) or
use (in the case of households). Cascade failure of
interconnected infrastructure assets (installations for energy,
transport, water, ICT) due to co-location or hub-functions needs
to be avoided. The comparison of different solutions tested
should include cost and cost/benefit analyses, and societal
implications
The proposal shall develop methods and tools for adapting
building and infrastructure standards and design methodologies
(…). Furthermore the research proposal shall demonstrate its
finding, taking into account the occurrence of different types of
natural (climate or geological) hazards, and including
comparative cost and cost/benefit analyses. The topic will
complement Seventh Framework Programme research focusing
on impacts of extreme weather on critical infrastructure.

Support Applicative
research for the
different purposes

III


1


2



19/61
19/61


DRS-14-2015: Critical Infrastructtopic 3: ..- analysis and
development of methods for assessing resilience
The proposal shall demonstrate that a set of common and
thoroughly validated indicators, including economic indicators,
could be applied to critical infrastructures in order to assess its
level of “resilience”, moreover a scale approach of “resilience”
level should be proposed across critical infrastructures (energy
grids, transportation, government, nuclear research
infrastructures, water, etc.). The methodology shall be based on
at least four types of critical infrastructure as test cases. Specific
models and modeling approaches will be proposed(..). security
metrics and indicators will be proposed that could be used in the
developed models to quantify to the possible extent the
considered risk and impact as well as give guidance to the
possible mitigation techniques – approaches. New methods of
assessing resilience based upon comprehensive threat,
criticality, and vulnerability assessments are of outmost
importance. Proposals should follow a uniformed comprehensive
and holistic approach at all levels (e.g. EU, country, local) (….) .

Support Applicative
research for the
different purposes

Hot

IV


1


2



20/61
20/61



DRS-17-2014/2015: Critical infrastructure protection topic
7: SME instrument topic: “Protection of urban soft targets
and urban critical infrastructures”
- mitigation of vehicle-borne improvised explosive devices, with
a specific focus on vehicle-borne ones (e.g. in cases of parked
vehicles, penetrative attacks, etc.). .

Support Applicative
research for the
different purposes

V

1


2




21/61
21/45
21/61

Overview of the
StroNGER
expertise


22/61
22/45
22/61

1) Design and rehabilitation of Civil structures and
infrastructures with regard to wind, earthquakes, waves,
landslides, fire, explosions

23/61
23/45
23/61

Design of the support structure of offshore wind turbines
Selection of support typology

Design and optimization
tower

special junction
zone
jacket:
horizontal element


jacket:
vertical element
jacket:
diagonal element

base:
diagonal element
bucket – pile guide
base:
horizontal element

Detailed design


pile

Fire safety design of a steel hangar for helicopter storage

24/61
24/45
24/61


Fire scenarios

Scenario B

Scenario A

Scenario C


Computational Fluid Dynamics for fire spread evaluation


25/61
25/45
25/61



26/61
26/45
26/61

2) Disaster resilience assessment

R.I.S.E. Framework for the resilience assessment and enhancement
Algorithm for assessment and enhancement of resilience
1
2

= ASSESSMENT

– follow path 1 (1st stage analysis)

= ENHANCEMENT – follow path 2

(2st

Scenario output before mitigation

----

= comment

Scenario output after mitigation

----

= WP content

stage analysis)

- General rules for modeling large scale
infrastructure as a network by considering
interrelations between nodes and links.
- Application to a case study (university campus)

Network
Level

WP7
Network Model
1

WP1

A number of Multiple-Hazard scenarios and
corresponding Intensity Measures (Ims) will be
generated

1

Hazard Scenarios

1

AS ES MENT and MITIGATION
S S
(Analysis for each node and link)

Local Level

PROTECTION

A

ROBUSTNESS & MITIGATION

PERFORMANCE
1

WP2

A

A

WP3

2

Load values

MDPA (bottom-up)

Structure performance

ordinary
element
IM
Action

2

B

B

2

B

People safety

critical
element

Mitigation measures

- Large scale fire test
for sensor calibration
(WP5) and validation
of models (WP1-2-3)
- Small scale multiple
hazard tests

Resistance

Repair time evaluation

Recovery
E.g. Repair time

% of rescued

2

1

WP5

Damage

Sensor technology

100 %

IM
1

2

OPTIMIZATION

L0 = initial losses
TR = recovery time

WP7
1

- SHM and IAQ sensor
network data
- sensor steered model
for robustness
assessment

WP4

Damage

2

AS ES MENT
S S

2

Local resilience indicators
Local resilience indicators are evaluated for
each node and Link and for each scenario

2

2

Network resilience indicators
Network resilience indicators are evaluated for
each scenario

A

WP6
Demonstration

Damage/Disservice

1

Status of nodes and links
(no interaction)

C

Quality

IMPROVEMENT OF RESILIENCE
2

Combination of local indicators

RESILIENCE OF THE ORIGINAL
INFRASTRUCTURE IS EVALUATED

Quality (network level)

1
Indicator

Indicator

Updated resilience indicators
Optimization analysis - network level
1

L 0i

B

TR

i

L0

Interactions effects (quality drop)

Indicator

TR

Resilience ∞ 1 /A

Quality

Quality

Network Level

Assessment and
enhancement of the
resilience of urban areas
including strategic
infrastructures.

CALIBRATION and
VALIDATION


27/61
27/45
27/61

D

Optimization of L0 and TR by
probabilistic-based algorithms

2
Decision
making and
allocation
of resources
among
structural and
non structural
mitigation
measures

28/61
28/45
28/61

R.I.S.E. Framework for the assessment and enhancement of the resilience

Representation of a large infrastructure as a network of nodes and links


Nodes: relevant premises of the infrastructure
Links: local and access roads, pipelines and
supply system
Disaster strike --> Hazard
MALL
MALL
scenario
HOUSE
AGGRGATE

OFFICE

FIRE
DEPARTMENT

SHOPPING
CENTER

HOUSE
AGGRGATE

HOUSE
AGGRGATE

----

= critical node in case of emergency HOSPITAL

NUCLEAR
PLANT

= earthquake action

Quantitative definition of Resilience
Disaster strikes (MCEER)

HOSPITAL

= blast action

= fire action

= principal link (e.g. road)

R.I.S.E. Multiscale philosophy
dLi

A

Initial losses

HOUSE
AGGRGATE

SHOPPING
CENTER

OFFICE

NUCLEAR
PLANT
= ordinary node

FIRE
DEPARTMENT

L0
Recovery time:
• Resourcefulness
• Rapidity

LOCAL- LEVEL:
Contribute of the single
premise (e.g. hospital,
(dQ/ dt)0 by considering the
interrelations with
proximity elements)

NETWORK- LEVEL:
- Convolution of the local-level contributes



29/61
29/45
29/61

3) Advanced numerical modeling

30/61
30/45
30/61

Vulnerability assessment of existing structures


Palazzo Camponeschi
L’Aquila



31/61
31/45 Numerical
31/61

modeling and performance analysis of complex structural systems

Review of the tender
design of the
Messina Strait Bridge

Numerical modeling for the interaction analysis between the environment and the
structural system

32/61
32/45
32/61

1 Dynamic response
0.60

dalong hub

0.40


P
u P (t)
Turbulent
wind

0.20

w P (t)

0.00
-0.20

v P (t)

-0.40

P

-0.60

Vm(zP)

-0.80

time [s]

-1.00

Mean
wind

200

700

1200

1700

2200

2700

3200

2 Design and optimization

Waves

7000
6000

z

H

y

vw(z’) y’

5000
4000

x,x’

Current

3000

z’

2000

Vcur(z’)

1000

h

0
[KN]

Monopile
6.1b

3 Detailing
d


Tripod

Jacket

6.1c

6.3b

Design of tunnel support structures


33/61
33/45
33/61


34/61
34/45
34/61

Modeling and analysis of strategic structures


Analysis of strategic structural
components of an aqueduct
system

35/61
35/45
35/61

Vulnerability assessment of existing structures


Assessment of structural damage
using satellite data

DinSAR data from:


36/61
36/45
36/61

4) Forensic Engineering

Role of technical consultant and developing of back analyses for the
reproduction of the damaging process or of the collapse occurred in civil
structures.


37/61
37/45
37/61

The I-35W Bridge collapse (Minnesota, USA)


38/61
38/45
38/61

A masonry arch structure collapse

Collapse of a historical church

39/61
39/45
39/61

Calibration of the 3D FE model of the Basilica
with and without elasto-plastic devices

Did the presence of the devices
cause the collapse of the pillars?
Max Bending moment


Basilica of Santa Maria di Collemaggio (damaged during the 2009 L’Aquila Earthquake)

No horizontal
diaphragm

horizontal
diaphragm

1 or 2

+ devices


40/61
40/45
40/61

5) Sustainability and Energy Harvesting

41/61
41/45
41/61

Structural investigations for the use of innovative natural construction materials for
the retrofitting of an ancient roman monument


Villa Silin, Libya

Basalt fiber reinforced natural mortar plate

Integration of piezoelectric devices in structural systems for vibration Energy Harvesting


42/61
42/45
42/61

3

VmR(r)

2
1
R1

r

u(r,t)
M3

Y

Blade-hub
main reactions
X

FSX

Wind turbine

Blade


Piezoelectric ring
for EH

43/61
43/45
43/61

Integration of piezoelectric energy harvesting devices in civil structures and
infrastructures


Flow-induced EH devices

Vibration EH devices



44/61
44/45
44/61

StroNGER – Vision

“…. to provide, through innovation,
advanced products and services
for a sustainable and safe world.”

45/61
45/45
45/61


C. Crosti, S. Arangio, F. Petrini, K. Gkoumas, F. Bontempi

www.stronger2012.com

StroNGER for HORIZON 2020

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Ähnlich wie StroNGER for HORIZON 2020

Ähnlich wie StroNGER for HORIZON 2020 (20)

Mehr von Franco Bontempi

Mehr von Franco Bontempi (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

StroNGER for HORIZON 2020