Hello Mam, We are the student of b.tech mechanical engg. we make foot step electricity genarator when we press the top of the project the spring is press the mechanical setup of project is working the rack and pinoin is connect to the shaft is connect to pully is connect to dianoma with help v velt when we pressure the top of the project the rack and pinion is rotating the shaft is rotating to the pully to rotating to dynoma is rotted produce the electricity and we optain the electricity by the system

1. SUBMITTED BY: SUBMITTED TO:-
VIKRAM YADAV(KI0455) MR. ADITYA MISHRA
ABHAY NARAYAN(KI0224) ASST. PROF. OF MECH DEPT.
DEVKINANDAN PALIWAL(K10499)
DEEPENDRA SHARMA(K10469) (CPU KOTA)
B.TECH FINAL YEAR
MECHANICAL ENGG.
A
PRESENTATION
ON
“FOOTSTEP ELECTRICITY GENERATOR”

2. 2.CONTAIN
•INTRODUCTION
•PRINCIPAL
•WORKING
•APPLICATIONS
•CONSTRUCTIONS
•PARTS

3. INTRODUCTION
It has the ability to produce electric power from
mechanical reaction (force) and then it change to
electric charges.
This kind of technology can be used as the alternative
electric power generator.
Design concept used in this thesis is to use place at the
walking area named as “Foot Step Power Generation
System”.

4. PARTS

5. 2. PRINCIPLE
This setup works on the principle of converting the
linear motion due to pressure of foot steps into rotary
motion. This rotary motion is utilized to rotate a power
generating device (dynamo). The amount of rotation
depends upon the weight of the person walking over
the platform and the tension of the spring used.
Depending upon the power generator used, the power
output can be increased.

6. 3. HOW TO SYSTEM WORK
1.When people walk on the floor, the floor press on
the mechanical setup. The setup depresses due to
the spring action and pulls the lever assembly
which rotates one of the freewheel bearing fitted to
the shaft.
2. The shaft then rotates the large pulley which is
connected to the smaller pulley through a V-belt.
This smaller pulley acts as a reducer which provides
more rotations corresponding to one rotation of the
large pulley

7. 3. This smaller pulley coupled with the dynamo a
device that converts the energy of motion into
electric current and power is obtained.

10. ADVANTAGES
•Highly efficient in more crowded places.
•Depending upon the power generator and number
of them, power output is very high
•Low cost level.
•Simple in construction.
•Pollution free.
•Reduces transmission losses.
•Wide areas of application.

11. APPLICATIONS
•Railway, subway stations
•Roads
•Temples
•Bus stands, air ports
•Music halls, auditoriums
•Markets