1. ZIBO OU’XIN POLYESTER GAUNTLETS FACTORY
As one of the major Chinese manufacturer and supplier of polyester tubular
gauntlets for lead acid battery, Zibo OU’XIN Polyester Gauntlets Factory has strived in
this industry for over 8 years. With the accumulation of experiences and techniques,
our factory has set up a complete facility from designing, weaving, fabric coating,
heat formation and inspection of woven tubular gauntlets. Our factory has gained
the ISO 9001:2000 Quality Management System Certification since Sep. 2012. From
the tradition mobile mandrel system to present floating mandrel system, our
productivity has been enlarged to annually 2M square meters, thus we can serve our
customers from Europe, South and East Asia as well as the domestic with high quality
and competitive price woven polyester gauntlets. We have exported to
India,Bangladesh,Ukraine,Brazil,and so on.
OU’XIN’S ENGINEERED WOVEN GAUNTLETS
Our woven gauntlets are made with engineered fabric of pure short staples,
continuous filament yarns or the mixed weaving with protective resin coating, which
offer higher resistance to chemical oxidation, better energy utilization due to
enhanced elasticcompressionofthe activemateial ofthebattery,thustoguarantee
the longer service life free of trouble. Meanwhile the reduced internal resistance and
strong fabric structure result in improved performance with higher capacity.
Main Characteristics of OU’XIN Gauntlets are as below:
● High porosity
● Low electrical resistance even with a close fabric structure
● Very high resistance to chemical oxidation
● Strong and highly stable even in heavy duty application and in high temperature
●
●
High mechanical strength (over 40N/cm in both directions) and controlled
elasticity
Easy filling with paste or powder by hand or by machine because of semirigid
Structure*

2. ZIBO OU’XIN POLYESTER GAUNTLETS FACTORY
OU’XIN’S MAIN SPECIFICATION OF WOVEN POLYESTER GAUNTLETS
1.ID8.4mm* T15~19* P9.7mm* H(v)
2.ID8.7mm* T15~19* P9.7mm* H(v)
3.ID8.5mm* T15~19* P9.4mm* H(v)
Ref. Application: Forklift battery
Ref. Application: OPzV, Forklift battery
Ref. Application: Explosion* proof battery,
Forklift battery
4.ID8.0mm* T18 * P9.0mm* H(v)
5.ID8.0mm* T15 * P9.7mm* H(v)
6.ID7.5mm* T18 * P9.0mm* H(v)
7.ID7.3mm* T15~16* P8.9mm* H(v)
8.ID6.5mm* T23 * P7.2mm* H(v)
9.ID6.3mm* T21 * P7.2mm* H(v)
10.ID6.0mm* T21~22* P7.2mm* H(v)
11.ID6.2mm* T22 * P7.6mm* H(v)
12.ID6.0mm* T22* P6.8mm.H(v)
*
Ref. Application: Golf car, Tourist vehicles
Ref. Application: Tourist & goods vehicles
Ref. Application: Golf car, Tourist vehicles
Ref. Application: OPzV
Ref. Application: Electrified tricycle
Ref. Application: Electrified tricycle
Ref.Application:Electrifiedtricycle
Ref.Application:Electrifiedtricycle
Ref..Application:.Electrified.tricycle
Note: ID=Internal Diameter; T=Tubular number; P=Pitch; (v)=various
* Other sizes can be designed and made as per customer’s specification.
MAIN.DATA.SHEET.OF.JINXIN.WOVEN.GAUNTLETS
1.Characteristics
1.1Color: Natural white
1.2Resin coating: Acrylic resin of JINXIN make.
1.3Fabric structure: the composition of the tube wall is:
yarns per cm. (Crosswise) 17 * 23 (300d ~285d)
yarns per cm. (lengthwise) 21.7 * 26 (300d ~285d)
1.4Wall thickness of the tube 0.3mm
2.Standard Sizes
2.1Standard internal diameter 6.0 – 9.0 mm
2.2Number of tubes: to customer specification
2.3Tube pitch, referred to standard diameters 6.8 * 9.7mm
2.4Maximum gauntlet length 3000mm
2.5Lateral finishes: simple cut C or T; side protection as requested.
3.Typical Chemical and Physical Data
3.1Bursting strength of the tube > 300N/cm
3.2Increase of outside diameter of the tube at 8 bar of internal pressure < 2%
3.3Porosity * 60%
3.4Electrical resistance of the wall tube 0.25* /cm
3.5Tensile strength:
2
Crosswise (one cm of gauntlet)
Lengthwise (one cm of gauntlet)
* 40N
* 70N
3.6Ratio ofResistance to chemical oxidation

3. ZIBO OU’XIN POLYESTER GAUNTLETS FACTORY
Bursting strength after 168hours of acid oxidation test compared to that before
the test: >90%
3.7Weight loss after 168hrs at +70* in 1.320g/cm3sulfuric acid solution: 0.4%
3.8Impurity release after 3hrs reflux
Chlorine : Nil
Organic matter : Nil
Metalics : Nil
4.Tolerance
4.1Tube diameter
4.2Gauntlet height
4.3Gauntlet width
4.4Tubes’ pitch
±0.1mm
±0.5mm
±1%
±1%
4.5Electrical resistance ±0.05* /cm2
Reference Inspection standard: JB/T 10054* 1999
Contact us:
ZIBO OU’XIN POLYESTER GAUNTLETS FACTORY
ErShiLiPu Industrial Park,Qingnian Road, Zhoucun district,
Zibo, Shandong 255100, P.R.China
Tel/Fax: +86-533- 6580090
Contact:
Mr. Peter, Manager
Email:cnzbiet@gmail.com
Mobile: +86-18653305034
Whatapp:+8613806487413
Skype:Kobelove2