1. SMR-500
SPEEDO STICK / Adhesion Promoter
TECHNICAL DATA
DESCRIPTION:
Speedo Stick adhesion promoter has been specifically designed for the mobile
refinish industry. Speedo Stick adhesion promoting system is specifically designed
to promote strong adhesion on all types of automotive plastic except
polyethylene. Speedo Stick contains etching type resin that will coat and seal
plastic parts so adhesion can be obtained with all types of paint systems. Speedo
Stick will work on all OEM aftermarket bumper covers as well as interior plastic
(i.e. door panels, dash pads, kick panels). Speedo Stick is easy to use and does not
require prior sanding, however, sanding generally will further enhance adhesion.
Does not contains isocyanates as do some competitive products.
PACKAGING:
Part Number Description Size Qty. Case
SMR-500 SPEEDO STICK Aerosol 6
INSTRUCTIONS:
1. Wash parts thoroughly with soap and water and dry with clean cloth or blow
dry.
2. Clean with plastic cleaner and wipe dry with clean lint free cloth.
3. Apply SMR-500 Speedo Stick with conventional paint gun at approximately
40 psi or with clean lint free cloth. Apply second coat after 3 minutes flash.
4. Apply primer or paint in 20-30 minutes. Final adhesion will occur as paint
thoroughly cures. (usually 12-24 hours)
6. Parts can be sanded, however it is not necessary.
SpeedoKote LLC ■ 5701 N. Webster St. ■ Dayton, Ohio 45414 ■ (937) 280-0091 ■ Fax (937) 280-0092
www.speedokote.com ■ e-mail: sales@speedokote.com
