Introduction to PPG for the Commercial Specifier and End User

2. ► A Fortune 200 Company – (#182)
► A global maker of paints, coatings, optical
products, specialty
materials, chemicals, glass and fiber glass
► Founded in 1883
► Headquartered in Pittsburgh, Pa.
► Owned by approximately 197,000
shareholders, including 15,500 employees
and retirees
► Now the largest coatings manufacturer in
the world

3. ► Approximately 39,000 employees
► In more than 70 countries PPG
Presence

4. ► Composed of 12 businesses in 5 segments:
> Performance Coatings
– Aerospace
– Architectural Coatings – Americas & Asia Pacific
– Automotive Refinish
– Protective & Marine Coatings
> Industrial Coatings
– Automotive OEM Coatings
– Industrial Coatings
– Packaging Coatings
> Architectural Coatings – EMEA (Europe, Middle East, Africa)
> Optical & Specialty Materials
– Optical Products
– Silicas
> Glass
– Fiber Glass
– Flat Glass

6. Performance Coatings:
Architectural Coatings Americas & Asia/Pacific

7. Performance Coatings:
Automotive Refinish

8. Industrial Coatings:
Packaging Coatings

9. Performance Coatings:
Protective & Marine Coatings

10. Industrial Coatings:
Automotive OEM Coatings

11. Industrial Coatings: Industrial Coatings

12. Architectural Coatings - EMEA:
Europe, Middle East, Africa

13. Optical & Specialty Materials:
Optical Products

14. Optical & Specialty Materials:
Silicas

15. Glass: Flat Glass

16. Glass: Fiber Glass

17. Commercial High
Performance Coatings

18. 100% Acrylic Direct to Metal Industrial Enamel
Product Type
• 90-306/406 Safety Red
• 90-310/410 Safety Blue
• 90-311/411 Safety Green
Products
Recommended uses
• Aluminum
• Ferrous Metal
• Galvanized Steel
• Concrete, Masonry
• Drywall, Stucco, Plaster
• CMU
• 90-313/413 Safety Orange
• 90-330/430 Safety Yellow
• 90-353/453 Black

19. • Direct to metal application
• Available in Satin and Gloss
• Excellent color and gloss retention
• Primer/Finish available in three colors, red, white, gray
• VOC – 1.5 lbs./gal. (191 g/L)
Key Information
• Improved color and gloss retention versus most
alkyds and two component coatings
• High hiding
• Flash rust resistant
• Easy to apply, low odor
• Performance Offset to Federal Standard TT-E-2784
• Meets MPI Category #154, Interior W.B. Light
Industrial Coating, Gloss, MPI Gloss Level 6
• Can earn LEED 2009 Credits
Features
Pitt-Tech Acrylic DTM

20. 100% Acrylic High Performance DTM Industrial Enamel
Product Type
• 90-1110 Satin
• 90-1210 Semi-Gloss
• 90-1310 Gloss
Products
Recommended uses
• Aluminum
• Ferrous Metal
• Galvanized Steel
• Concrete, Masonry
• Drywall, Stucco, Plaster
• CMU
• 90-1306 Gloss Safety Red
• 90-1313 Gloss Safety Orange
• 90-1333 Gloss Safety Yellow
• 90-1353 Gloss Black

21. • Excellent adhesion for true DTM performance
• Improved color, and gloss retention versus most
alkyds, water-base and two-component systems
• High hiding
• Flash rust resistant
• Easy to apply, low odor
Key Information (vs. Pitt-Tech DTM)
• Performance Offset to Federal Standard TT-E-2784
and MIL-P-28578
• Meets MPI Category #153, Light Industrial Coating
Interior W.B. Satin, Semi Gloss or Gloss
• Meets MPI Category #163, Light Industrial Coating
Interior W.B., Gloss, MPI Gloss Level 5
• Can earn LEED 2009 Credits
Features
Pitt-Tech Plus Acrylic DTM

22. 100% Acrylic High Performance Direct to Metal Exterior Dry Fog
Product Type
• 90-810 Neutral Base
• 90-811 White Base
• 90-812 Porcelain White
Products
Recommended uses
• Ferrous Metal
• Previously Painted Metal
• Galvanized Metal
• Concrete
• Tanks
• Towers
• Canopies

23. • Direct to Metal High Performance Semi-Gloss
• Exterior dry fog
• Dry fog at 10-15 feet (75°/ 50% RH)
• Low VOC - .71 lbs./gal. (85 g/L)
Key Information
• Self Priming
• Excellent Dry Fall and Transfer Efficiency
• Protects from the effects of corrosion and weathering
• Exceptional Color and Gloss Retention
• Rust Inhibitive
• Easy to apply via spray, brush or roll
• VOC compliant
• Flash Rust Resistance
Features
Pitt-Tech Exterior Dry Fall

24. PPG Waterborne Epoxy

25. Two Component Waterborne Polyamide Epoxy
Product Type
• 98-1 Porcelain White
• 98-2 Black
• 98-3 Light Gray
• 98-4 ASA #49 Gray
• 98-98 Gloss Component B
• 98-100 S/G Component B
Products
Recommended uses
• Aluminum
• Ferrous Metal
• Wood
• Concrete
• Galvanized Steel
• Drywall
• Plaster
• 98-9 Tile Red
• 98-10 Safety Red
• 98-11 Safety Blue
• 98-12 Safety Orange
• 98-13 Safety Yellow
• 98-101 Low VOC Gloss Comp. B

26. • Waterborne Polyamide Epoxy
• Gloss & Semi-Gloss Sheens
• VOC - 2.2 lbs/gal. (271 g/L)
• Spray, brush, roller application
• Excellent floor coating for walk-ways / light traffic
• Packaged Colors including Safety Colors
• Pastel & Mid-tone Tint Base
Key Information
• Water-borne formula meets all national VOC
regulations
• Chemical and solvent resistance equal to solvent
epoxy coatings
• Superior abrasion resistance
• Suitable for both floors and vertical surfaces.
• Water borne formula for low odor and reduced
yellowing
Features

27. ANTI-SLIP SAFETY FLOORING PRODUCT LINE

28. Safety
Non-Skid coatings can help
improve the safety of the
work environment
Walkways, stairs, and
generally any public access
spaces need to have slip and
fall protection

29. Did You Know Slips and Falls
in the Workplace…
• Cause 250,000 injuries &
800 fatalities each year
• Cost $30,000 per incident or
$1 million when a fatality results
• One of the leading causes
of workers’ compensation &
liability claims
ACCIDENT STATISTICS

30. Coefficient of Friction (COF):
The ratio of the force that maintains contact
between an object and a surface and the
frictional force that resists the motion of the
object
Simply:
“measurement of slip resistance”
BACK TO BASICS

31. OSHA:
• Requires a value of 0.5 COF
in the workplace
ADA (Americans with
Disabilities Act):
• Recommends 0.6 COF
for walkways
• Recommends 0.8 COF
for ramps
Coefficient of Friction (COF)

32. BACK TO BASICS
Coefficient of Friction (COF)
More Basics:
• Slips happen where there is
too little friction or traction
between the footwear and
the walking surface
• Hydroplaning

33. #1 - Water
COMMON CAUSES OF SLIPS AND FALLS

34. #2 - Chemical or Oil spills
COMMON CAUSES OF SLIPS AND FALLS

35. #3 - Dirt and debris
COMMON CAUSES OF SLIPS AND FALLS

36. Because PPG Anti-Slip Safety
Coatings Were Developed to
Withstand:
•“Controlled crash” of 30 ton
F-14 Tomcats landing at
speeds over 150 mph
• Contamination exposure from
jet fuel, hydraulic fluids, and
sea water while maintaining a
0.85 COF
• Service life of 12 months in time
of war
WHY ON AIRCRAFT CARRIER FLIGHT DECKS?

37. PPG ANTI-SLIP TECHNOLOGY
The Technology:
Constant profile and aluminum oxide gives PPG safety coatings its extreme anti-
slip and durability characteristics as well as being easy to apply
Spilled Liquid Anti-Slip Coatings

38. Aluminum Oxide on the Moh’s Hardness Scale

39. • Single component, water-based
acrylic anti-slip.
• Low VOC and fast cure.
• Apply to: wood, asphalt, metal
and concrete.
• Great for pedestrian traffic
areas like:
-platforms
-ramps and walkways
SFT 600 – PEDESTRIAN GRADE
(#99-600X Series)

40. • Two component, water-based
epoxy anti-slip.
• Low VOC
• Can be applied to dry or damp
surfaces.
• Suitable for barefoot traffic.
• Ideal for:
- locker rooms or shower areas
- hospitals and laundry areas
- swimming pool decks
- marinas and boat decks
SFT 610 – BAREFOOT/RECREATIONAL GRADE
(#99-610X Series)

41. • Single component epoxy ester
• Excellent chemical resistance to:
- oils, gasoline, acids, and most
solvents
• Ideal for high pedestrian traffic
and/or light vehicular areas
like:
- decks, ramps, and walkways
- garages and loading areas
including car ramps
- office, stores, and school
entrances
• Unused product can be resealed
and applied later
SFT 625 –HEAVY PEDESTRIAN AND LIGHT ROLLING GRADE
(#99-625X Series)

42. • Two component epoxy
• Great for heavy rolling traffic and
heavy impacts
• Excellent chemical resistance to:
- oils, gasoline, acids, and
most solvents
• Ideal for industrial areas like:
-manufacturing, chemical
or food plants including
loading areas
- machine shops and
warehouses
- stadiums and transit systems
SFT 650 – HEAVY DUTY GRADE
(#99-650X Series)

43. • 100% solids two component epoxy
• Great where odor and solvents
are a concern
• Excellent chemical resistance to:
- oils, gasoline, acids, and
most solvents
• Ideal for industrial areas like:
- manufacturing and chemical
processing plants
- kitchens, cafeterias,
and wineries
- meat packing and food
processing plants
SFT 675 – ZERO VOC HEAVY DUTY GRADE
(#99-675X Series)

44. 44
Premium
Formulated for patching larger
cracks, voids and openings on
masonry and stucco surfaces
Compatible with acrylic coatings
Premium, lightweight acrylic
latex block filler and surfacer
Smoothes, fills and levels
surfaces
Can help earn LEED 2009
credits*
Premium alkali-resistant
primer
Excellent sealing and stain-
blocking performance
Can help earn LEED 2009
credits*
Interior/ExteriorInterior/ExteriorInterior/Exterior
For more information, visit: ppgpro.com
* See product TDS for more detail.
Product Offering > Primers: PPG Paints

45. 45
High-build primer
Resists wind-driven rain as part
of a three-coat system
Can help earn LEED 2009
credits*
Alkali-resistant primer
Minimizes white-crust salt deposits
Protects and prepares the surface
for topcoating
Minimizes peeling and cracking
ExteriorInterior/Exterior
For more information, visit: ppgpro.com
* See product TDS for more detail.
Product Offering > Primers: PPG Paints

46. 46
Fast-drying, clear or pigmented
waterborne acrylic sealer
Penetrates and seals new, porous
surfaces and old, dusty or chalky
paint films and substrates
Improves primer/topcoat bond
Deep-penetrating, tintable,
pigmented epoxy-ester primer
Primes, seals and solidifies chalky
masonry surfaces
Recommended for tilt-ups;
alkali- and efflorescence-resistant
ExteriorInterior/Exterior
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

47. 47
Clear, penetrating,
non-film-forming sealer
Water repellant
Lengthens substrate life and
reduces maintenance costs
Maintains natural appearance
Clear, film-forming sealer
Water repellant
Minimizes staining and
discoloration on traffic surface
Prevents peeling/cracking
Interior/ExteriorInterior/Exterior
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

48. 48
100% acrylic, high-build elastomeric
Smooth / lower sheen finish, bridges
cracks and masks surface
imperfections
Resists wind-driven rain with three
coats at standard coverage
Exterior
100% acrylic, high-build
elastomeric
Smooth finish, bridges cracks
and masks surface imperfections
Resists wind-driven rain with two
coats at 6.5 mils each
Exterior
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

49. 49
100% acrylic texture coating
Fine texture
Minimizes surface imperfections
Provides a decorative
appearance
100% acrylic texture coating
Medium texture
Minimizes surface imperfections
Provides a decorative
appearance
100% acrylic texture coating
Medium texture vermiculite
Minimizes surface imperfections
Provides a decorative
appearance
Interior/ExteriorInterior/ExteriorInterior/Exterior
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

50. 50
High-build, solvent-borne
acrylic coating
Smooth texture
Can be applied down to 20° F
Self-priming, bridges hairline cracks
Exterior
100% acrylic texture coating
Coarse texture
Minimizes surface imperfections
Provides a decorative
appearance
Exterior
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

51. 51
Quick-drying, opaque water-
repellant for vertical, above-grade
surfaces; recoat in 15 minutes
Can be applied down to 35° F
Available in 3 bases
Film-
forming, tintable, waterborne, acryl
ic concrete stain for vertical and
horizontal above-grade surfaces
Water- and chemical-
resistant, minimizes stains and
discoloration
Available in 3 bases
High-build acrylic topcoat for
vertical, above-grade surfaces
Resists wind-driven rain with two
coats at 5 mils each; provides
extra protection in fewer coats
Available in 2 bases
Interior/ExteriorExteriorInterior/Exterior
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

52. 52
Easy-to-apply to asphalt,
concrete, brick and masonry
by striper, brush or roller
Minimizes bleeding
Fast dry time enables traffic to
resume quickly
Latex: White, Yellow, Handicap Blue, Red
Alkyd: White and Yellow
Tintable White, Bright White
and Neutral Base
Bright whites create vivid lines
Wide tinting range
Water reducible
Compatible with most
sprayers and stripers
For more information, visit: ppgpro.com
Product Offering > Commercial: PPG Paints

56. Product Type
• 57500 Alkyd Clear (National formula)
• 56500 Acrylic/Oil Clear (OTC formula)
• 56400 Acrylic Clear (SouthCoast formula)
Products
Color
Olympic Maximum Clear
• Clear
Recommended uses
• Outdoor Furniture
• Exterior Wood Surfaces
• Decks, Fences, Siding
• Playsets
It’s unique formula penetrates deep, enhancing the
natural look of wood while it
strengthens, protects, and conditions wood fibers.
May be used on new wood, pressure-treated
wood, weathered wood, and wood previously
coated with a solvent-based clear or semi-
transparent stains.

57. Semi-Transparent
Stains

58. The PPG Promise:
Because Every Job Matters
As a global coatings leader with over 100
years of unmatched coatings
expertise, research and manufacturing
excellence, our customers are always our
highest priority.
We promise to:
• Understand the needs of our customers
• Find the right solution for every job
• Stand behind every product
• Be responsive and proudly deliver
• Meet our commitments