Know more about a range of non metallic seal less mag driv pumps.

1. Non-Metallic Seal-less
Mag-Drive Pumps
Seal-less Mag-Drive Pump Specialists
SOLID PP & PVDF
Thermoplastic
Mag-Drive Pumps
Centrifugal,
Turbine,
Self-Priming
&
Vertical

2. From WARRENDER: Advanced design,
materials and engineering technology
Warrender Pumps - mag-drives built to survive
d
long after others fail
WARRENDER, LTD. specializes in the application, engineering and distribution of
technically advanced, hermetically sealed pumping systems. Industries worldwide
have found an extensive program to serve their needs.
Featuring 18 designs with over 250 basic models. This extensive pump range
allows our engineering department to meet your exact process requirements.
All WARRENDER, LTD. seal-less equipment is engineered to comply with the
1990 EPA Clean Air Act governing “Hazardous Air Pollutants”.
ZERO LEAKAGE - ZERO CORROSION
MCH Thermoplastic Centrifugal
MCSP Thermoplastic Self-Primer
The industry’s most comprehensive range of mag-drive pumps.
d
For over 25 years, we have been solving the most challenging process applications
with leading edge pump technologies.
Warrender can meet your specifications!
www.warrender.com
(2)
sales@warrender.com

3. Complete range of non-metallic mag-drive process pumps
m
d
WARRENDER’S non-metallic mag-drive designs
m
d
Constant research and development, combined with versatile and innovative
production, has led to the industry’s most comprehensive range of non-metallic
mag-drive pumps.
Series
•
•
•
•
•
MCH
MC-SP
MCHV
MT
MT-SP
• MP
Thermoplastic Centrifugal
Thermoplastic Centrifugal Self-Primer
Thermoplastic Centrifugal Vertical Sump
Thermoplastic Regenerative Turbine
Thermoplastic Regenerative
Turbine Self-Primer
Thermoplastic Rotary Vane
Materials of Construction
• Pump casings & internal components:
Simona polypropylene (PP) or
polyvinylidene fluoride (PVDF)
• Casing o-ring: EPDM, viton or FEP
• Internal bearings: carbon filled PTFE or carbon
• Shaft & thrust bearings: 99.7% pure alumina
(ceramic) or silicon carbide
Competition
Series MCH
Options
•
•
•
•
Externally flushed rear cavity for slurries
Heavy duty rear thrust bearing
Dual containment shell
Self-priming design for top unloading
CNC Machined construction
WARRENDER thermoplastic designs are uniquely constructed from *Simona
Polypropylene (PP) or polyvinylidene fluoride (PVDF). Rugged pump casings and
impeller assemblies are machined from solid extruded bar and block material. CNC
machined construction provides distinctive advantages over molded or lined
configurations. Typical casing wall thicknesses for molded pumps are only 1/8” - 1/4”;
failures often result from chemical attack, thermal expansion and pipe stress. Lined
pumps have a mere .090” - .120”
lining thickness and the added
risk of casing failures caused by
separation, permeation or external
corrosion. Solid thermoplastic
pump casings feature wall
thicknesses of 1/2” to 1-1/2” for
the utmost in chemical resistance
and durability.
* Technical specifications available upon request
www.warrender.com
(3)
sales@warrender.com

4. MCH Series
Centrifugal Pumps
MCH pumps are fabricated from SOLID Simona PP or
PVDF thermoplastics to resist internal or external corrosion.
Heavy walled, CNC machined construction provide far greater
resistance to permeation and migration of corrosive, and permeating
liquids. Additionally, added strength and thermal stability resists
deformation, even in the most severe applications.
Technical Features
• Exclusive SOLID machined PP or PVDF casings and impeller
components for maximum chemical resistance
• Heavy casing wall thicknesses
• All plastic casing withstands external corrosion
• Integral raised face flanges (no threaded adapters) to ensure
zero leakage
• Oversized, high purity ceramic or silicon carbide thrust
bearings and shaft
• Chemically resistant, channeled sleeve bearings
• Modular impeller allows for varying hydraulic performances
• Compact, high torque magnetic coupling with reduced mass
• Standard, direct starting NEMA motors
Rear Cartridge
Commercial Benefits
• Eliminates costly and complex mechanical seal systems
• Avoidance of mechanical seals that cause production downtime
• Zero leakage, magnetic coupling circumvents constant EPA
monitoring and potential fines from excessive emissions
associated with mechanical seals
• Efficient hydraulic design minimizes power consumption
• Magnetic coupling prevents the introduction of unwanted air
into the process for higher production yields
• Positive sealing with integral flanged ports eliminates the
chance of emissions from plastic threads
• Simplified maintenance, with registered fits, requires no special
tools or settings
• SOLID thermoplastic casings never corrode (internally or externally)
• Premium machined Simona thermoplastics provide higher
resistance to chemical and temperature degradation than molded
or composite materials
• Standard NEMA motor frame allows for low cost, fast replacements
in the field
www.warrender.com
(4)
Solid Block
Machined
Casing
sales@warrender.com

5. MCH Series
MCH Dimensions & Specifications
MCH with Foot Mounted Motor
MCH Dimensions
MCH with Pedestal Mounted Motor
( all dimensions in inches )
MODEL NO.
IMPELLER
SUCTION
FLANGE
DISCHARGE
FLANGE
D
X
Y
Z
CP
F2
LJ
WB
MCH 11001
MCH 16001
MCH 28001
MCH 51001
MCH 81001
MCH 91001
4
4.5
4.5
6
6.5
7
1.5" 150# RF ANSI
2" 150# RF ANSI
2" 150# RF ANSI
3" 150# RF ANSI
4" 150# RF ANSI
4" 150# RF ANSI
1" 150# RF ANSI
1.5" 150# RF ANSI
1.5" 150# RF ANSI
2" 150# RF ANSI
3" 150# RF ANSI
3" 150# RF ANSI
3.5
3.54
3.5
6.89
7.87
7.87
5.04
5.87
5.87
6.73
7.44
8.94
2.99
2.76
3.31
4.06
4.76
5.08
2.09
2.28
2.48
2.87
3.23
4.02
9.25
9.37
10.03
12.64
14.49
14.92
N/A
N/A
N/A
2.39
2.87
2.99
N/A
N/A
N/A
9.84
1.42
11.42
N/A
N/A
N/A
8.66
9.84
9.84
MCH Specifications
MODEL NO.
PP / TEFC
PORT SIZES
SUCT / DISCH
MCH11001-P2T1
MCH11001-P2F1
MCH16001-P2T1
MCH16001-P2F1
MCH28001-P2F1
MCH51001-P2F1
MCH81001-P2F1
MCH91001-P2F1
1.25" x 1" FNPT
1.5" x 1" FLANGE
1.5" x 1.25" FNPT
2" x 1.5" FLANGE
2" x 1.5" FLANGE
3" x 2" FLANGE
4" x 3" FLANGE
4" x 3" FLANGE
MODEL NO.
PVDF / TEFC
PORT SIZES
SUCT / DISCH
MCH11001-V2T1
MCH11001-V2F1
MCH16001-V2T1
MCH16001-V2F1
MCH28001-V2F1
MCH51001-V2F1
MCH81001-V2F1
MCH91001-V2F1
1.25" x 1" FNPT
1.5" x 1" FLANGE
1.5" x 1.25" FNPT
2" x 1.5" FLANGE
2" x 1.5" FLANGE
3" x 2" FLANGE
4" x 3" FLANGE
4" x 3" FLANGE
( all dimensions in inches )
MAX FLOW-GPM MAX TDH-FT
3500/1750 RPM 3500/1750 RPM
50 / 25
50 / 25
75 / 40
75 / 40
120 / 70
180 / 100
400 / 200
550 / 250
65' / 18'
65' / 18'
90' / 28'
90' / 28'
85' / 29'
140' / 38'
160' / 40'
180' / 44'
MAX FLOW-GPM MAX TDH-FEET
3500/1750 RPM 3500/1750 RPM
50 / 25
50 / 25
75 / 40
75 / 40
120 / 70
180 / 100
400 / 200
550 / 250
65' / 18'
65' / 18'
90' / 28'
90' / 28'
85' / 29'
140' / 38'
160' / 40'
180' / 44'
www.warrender.com
MATERIALS
MAX (PSIG)
PUMP, O-RING STD/DUAL CF
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
110
110
110
110
110 / 150
110 / 150
110 / 150
110 / 150
MATERIALS
MAX (PSIG)
PUMP, O-RING STD/DUAL CF
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
(5)
110
110
110
110
110 / 150
110 / 150
110 / 150
110 / 150
MOTOR
(HP)
PUMP FRAME
NEMA SIZE
WT (LBS)
1
1
2
2
3 or 5
5 or 7.5
15 or 20
25 or 30
56-C
56-C
143/5-TC
143/5-TC
182/4-TC
182/4-TC, 213/5-TC
213/5-TC, 254/6-TC
284/6-TSC
9
9
13
13
60
94
101
104
MOTOR
(HP)
PUMP FRAME
NEMA SIZE
WT (LBS)
1
1
2
2
3 or 5
5 or 7.5
15 or 20
25 or 30
56-C
56-C
143/5-TC
143/5-TC
182/4-TC
182/4-TC, 213/5-TC
213/5-TC, 254/6-TC
284/6-TSC
10
11
15
16
63
101
109
112
sales@warrender.com

6. MCH Series
3500 RPM (60 Hz)
1750 RPM (60 Hz)
MCH Series
www.warrender.com
(6)
sales@warrender.com

7. MC - SP Series
Centrifugal Self-Primer Pumps
P
The same basic features of MCH pumps apply to the MC-SP Series design with
the addition of a self-contained, self-priming pump casing. MC-SP pumps provide
smooth continuous leak-proof operation where top unloading is specified.
Materials of Construction
•
•
•
•
Pump casings & internal components: polypropylene or PVDF
Casing o-ring: EPDM, viton or FEP
Internal bearings: carbon filled PTFE or carbon
Shaft & thrust bearings: 99.7% pure alumina (ceramic) or
silicon carbide
Performances
•
•
•
•
Flows to 250 GPM (60 m3/h)
Heads to 130 FT (35 m)
System pressures to 110 PSIG (8 bar)
Maximum Temperatures to: 230°F (110°C)
Options
• Externally flushed rear cavity for slurries
• Dual containment shell
PARTS LIST
10
20
30
40
50
61F
61R
62F
62R
71
75
80
85
88
90
78
NOTE: bearings and other wearing parts are shown in black.
www.warrender.com
(7)
sales@warrender.com
Rear Casing
External Magnet
Internal Magnet
Impeller
O-ring
PTFEC Front Thrust Brg.
PTFEC Rear Thrust Brg.
CERAMIC
Front Thrust Brg.
CERAMIC
Rear Thrust Brg.
CERAMIC shaft / ring
PTFEC Bearings (4)
Kit Spares
Pump Head
Rear Wet End
(kit + rear casing)
Wet End
Bracket

8. MC - SP Series
MCSP Dimensions & Specifications
MCSP Dimensions
MODEL NO.
IMPELLER
MC-SP 27501
MC-SP 50501
MC-SP 80501
4.75"
5.625"
6.375"
( all dimensions in inches )
SUCTION
FLANGE
D
PORT SIZES
SUCT / DISCH
MCSP 27501-P2F1 1.5" x 1.5" FLANGE
MCSP 50501-P2F1 2" x 2" FLANGE
MCSP 80501-P2F1 3" x 3" FLANGE
MCSP 27501-F2F1 1.5" x 1.5" FLANGE
MCSP 50501-F2F1 2" x 2" FLANGE
MCSP 80501-F2F1 3" x 3" FLANGE
X
Y
S
CP
F2
LJ
WB
5.35
6.89
7.87
1.5" 150# RF ANSI 1.5" 150# RF ANSI
2" 150# RF ANSI 2" 150# RF ANSI
3" 150# RF ANSI 3" 150# RF ANSI
MCSP Specifications
MODEL NO.
PP / TEFC
DISCHARGE
FLANGE
12
14.88
14.72
8.43
10.59
12.83
6.69
9.17
9.94
15.67
19.17
20.82
2.6
2.32
2.87
7.6
9.84
11.42
6.1
8.66
9.84
( all dimensions in inches )
PERFORMANCES
GPM / TDH (MAX)
MATERIALS
PUMP, O-RING
80 / 80'
140 / 105'
250 / 120'
80 / 80'
140 / 105'
250 / 120'
PP, EPDM
PP, EPDM
PP, EPDM
PP/ PVDF, EPDM
PP/ PVDF, EPDM
PP/ PVDF, EPDM
www.warrender.com
(8)
MAX (PSIG) MAX TEMP
STD/DUAL CF
(DEG F)
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
140
140
140
180
180
180
POWER
(HP)
PUMP FRAME
NEMA SIZE
WT (LBS)
PUMP END
3 or 5
5 or 7.5
10 or 15
3 or 5
5 or 7.5
10 or 15
182/4-TC
182/4-TC, 213/5-TC
213/5-TC
182/4-TC
182/4-TC, 213/5-TC
213/5-TC
85
115
125
85
115
125
sales@warrender.com

9. MCH V Series
Vertical Centrifugal Sump Pumps
MCHV seal-less vertical pumps do not require mechanical or lip seals, ensuring
leak-proof handling of corrosives.The heavy duty shaft is supported by ball bearings
with no bushings to wear; shaft deflection is thereby eliminated. MCHV pumps are
fabricated from Simona polypropylene to resist internal or external corrosion. The
hermetically sealed column is permanently isolated from corrosive liquid or fumes.
Materials of Construction
•
•
•
•
Pump casings & internal components: PP or PVDF
Casing o-ring: EPDM, viton or FEP
Internal bearings: carbon filled PTFE or carbon
Shaft & thrust bearings: 99.7% pure alumina
Performances
• See MCH performance curves
Technical Features
•
•
•
•
Non-cantilevered shaft
Hermetically sealed column
Isolated heavy duty column shaft with oversized ball bearings
Exclusive solid CNC machined thermoplastic casings and
impeller components
• Oversized, high purity ceramic or silicon carbide thrust
bearings and shaft
• Modular impeller allows for modifying performances
• Direct starting NEMA motors
Commercial Benefits
• Eliminates costly and complex mechanical seal systems
• Avoidance of seals and bearing flush lines that cause production downtime
• Zero leakage, magnetic coupling circumvents constant EPA monitoring
and potential fines from excessive emissions
• High hydraulic efficiencies minimize power consumption
• Magnetic coupling prevents the introduction of unwanted air into the process
• Simplified maintenance, with registered fits, requires no special tools or settings
• SOLID thermoplastic casings never corrode (internally or externally)
• Premium machined Simona thermoplastics provide higher resistance to
chemical and temperature degradation than molded components
• Standard NEMA motor frame allows for low cost, fast replacements in the field
www.warrender.com
(9)
sales@warrender.com

10. MCH Series
Internal Magnet
Fully encapsulated, rare
earth magnets have
exceptional torque
capability to provide
slip-free synchronized
performance
Sleeve Bearings
Two-piece design available in carbon
and SIC to suit your application needs.
Impeller Thrust
Bearing
Replaceable and oversized
to easily accommodate
thrust loads.
Driver
Standard motor is
utilized for simple close
coupled mounting
Impeller
Bracket
Separate piece allows you
to interchange among
internal magnet drives.
Joins the pump to the driver.
External Magnet
Rear Casing
Non-metallic reinforced polymer
eliminates heat and efficiency
losses usually associated with
metallic mag-drives.
O-Ring
Single (fully confined) O-ring
for better sealing reliability.
Machined from solid
block PP or PVDF with
optional raised face
flanges for superior
performance.
Shaft
Stationary shaft simplifies the
design and is made from 99.7%
pure alumina ceramic.
Thrust Bearing
Casing
Uses rare earth magnets and is
dynamically balanced to extend
motor bearing life.
Provides stable, oversized
axial thrust surface for
impeller assembly.
Self-Priming Model MCSP offers the
same benefits with the addition of a
self-contained, self-priming pump casing.
MCSP pumps provide smooth, continuous
leak-proof operation where top unloading
is required.
www.warrender.com
(10)
sales@warrender.com

11. MT Series
Stationary Shaft Design for
MT Models 7003 or larger
Shaft
Made from 99.7% pure
alumina ceramic.
Driver
Standard motor is
utilized for simple close
coupled mounting
Impeller
Precision machined from a
single piece of PVDF.
Hydraulically balanced to
eliminate axial thrust
loads.
Rear Ring
Bracket
Encloses the impeller and
completes the volute
pathway.
Joins the pump to the driver.
External Magnet
Rear Casing
Uses rare earth magnets and is
dynamically balanced to extend
motor bearing life.
Non-metallic reinforced polymer
eliminates heat and efficiency
losses usually associated with
metallic mag-drives.
O-Ring
Single (fully confined) O-ring
for better sealing reliability.
Casing
Machined from solid block PP or PVDF
with optional raised face flanges for
superior performance.
Stationary Shaft Design for
MT Models 7002 and lower
Internal Magnet Assembly & Shaft
Impeller
Precision machined from
a single piece of PVDF.
Hydraulically balanced to
eliminate axial thrust loads.
Rear Ring
Encloses the impeller and
completes the volute
pathway.
Fully encapsulated, rare earth magnets
have exceptional torque capability to
provide slip-free synchronized performance.
The 2 piece shaft is made from 99.7% pure
alumina (ceramic).
www.warrender.com
(11)
sales@warrender.com
Using a Regenerative
Turbine as a mixer
Feed two different liquids (or a
liquid and gas) into the suction
side of the pump. The rotary
impeller motion quickly and
efficiently mixes the two
substances together. The
turbine’s strong stirring
capabilities eliminate the need
to use a static mixer or
diffusion pipe.

12. MT Series
Regenerative Turbine Pumps
Ideally suited to low flow applications, MT regenerative
turbine pumps avoid oversized centrifugals, that
require flow by-passing and excessive horsepower.
MT non-metallic turbine designs have excellent
chemical resistance and extremely low wear
characteristics. Variation in head calculations have
minimal effect on the flow of a turbine pump. Also,
turbine pumps can be throttled to a required duty
point without by-passing.
Features
• Exclusive solid machined PP or PVDF casings
and impeller components
• Heavy casing wall thicknesses
• Withstands external corrosion
• Integral raised face flanges
(no threaded adapters) to ensure zero leakage
• Oversized, high purity ceramic shaft
• Chemically resistant carbon sleeve bearings
• Self-balancing impeller eliminates thrust bearing
wear
• Handles up to 20% entrained gas, resists cavitation
• Separate impeller minimizes maintenance costs
• Direct starting, standard NEMA motors
Materials of Construction
•
•
•
•
Pump casings & internal components: PP or PVDF
Casing o-ring: EPDM, viton or FEP
Internal bearings: carbon filled PTFE or carbon
Shaft: 99.7% pure alumina (ceramic)
Performance
•
•
•
•
Flows to 60 GPM (14 m3/h)
Heads to 180 FT (50 m)
System pressures to 110 PSIG (8 bar)
Temperatures to: 230°F (110°C)
MT pedestal pump
Options
• Dual containment shell
www.warrender.com
MT self-balancing
impellers eliminate
axial thrust loads.
(12)
sales@warrender.com

13. MT Series
MT Dimensions
MT with Foot Mounted Motor
MT with Pedestal Mounted Motor
MODEL NO.
NPT
MT 2002
MT 3002
MT 3003
MT 5002
MT 5003
MT 7002
MT 7003
MT 9002
MT 9003
MT 16002
MT 16003
1/2"
3/4"
3/4"
1"
1"
1"
1"
1"
1"
1.25"
1.25"
SUCTION
FLANGE
1/2" 150# RF ANSI
3/4" 150# RF ANSI
3/4" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1.25" 150# RF ANSI
1.25" 150# RF ANSI
DISCHARGE
NPT
FLANGE
1/2"
3/4"
3/4"
1"
1"
1"
1"
1"
1"
1.25"
1.25"
1/2" 150# RF ANSI
3/4" 150# RF ANSI
3/4" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1.25" 150# RF ANSI
1.25" 150# RF ANSI
www.warrender.com
(13)
D
X
Y
CP
F2
LJ
WB
2.48
3.50
3.50
3.50
3.50
3.50
3.50
3.50
5.35
7.87
7.87
4.72
5.51
5.51
6.30
6.30
6.30
7.48
7.48
7.48
9.82
9.82
1.22
1.22
1.22
1.42
1.42
1.42
1.57
1.57
1.57
1.73
1.73
5.12
7.06
7.60
8.23
8.23
9.06
9.21
9.21
9.72
9.65
9.65
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2.87
2.80
2.80
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
7.59
11.40
11.40
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4.70
9.82
9.82
sales@warrender.com

14. MT Series
MT Specifications
MODEL NO.
PP / TEFC
PORT SIZES
SUCT/DISCH
MT2002-P1T1
1/2" x 1/2" FNPT
MT2002-P1F1 1/2" x 1/2" FLANGE
MT2003-P1T1
1/2" x 1/2" FNPT
MT2003-P1F1 1/2" x 1/2" FLANGE
MT3002-P1T1
3/4" x 3/4" FNPT
MT3002-P1F1 3/4" x 3/4" FLANGE
MT3003-P2T1
3/4" x 3/4" FNPT
MT3003-P2F1 3/4" x 3/4" FLANGE
MT5002-P2T1
1" x 1" FNPT
MT5002-P2F1
1" x 1" FLANGE
MT5003-P2T1
1" x 1" FNPT
MT5003-P2F1
1" x 1" FLANGE
MT7002-P2T1
1" x 1" FNPT
MT7002-P2F1
1" x 1" FLANGE
MT7003-P2T1
1" x 1" FNPT
MT7003-P2F1
1" x 1" FLANGE
MT9002-P2T1
1" x 1" FNPT
MT9002-P2F1
1" x 1" FLANGE
MT16002-P2T1 1.25" x 1.25" FNPT
MT16002-P2F1 1.25" x 1.25" FLANGE
MODEL NO.
PVDF / TEFC
PORT SIZES
SUCT/DISCH
MT2002-V1T1
1/2" x 1/2" FNPT
MT2002-V1F1 1/2" x 1/2" FLANGE
MT2003-V1T1
1/2" x 1/2" FNPT
MT2003-V1F1 1/2" x 1/2" FLANGE
MT3002-V1T1
3/4" x 3/4" FNPT
MT3002-V1T1 3/4" x 3/4" FLANGE
MT3003-V2T1
3/4" x 3/4" FNPT
MT3003-V2F1 3/4" x 3/4" FLANGE
MT5002-V2T1
1" x 1" FNPT
MT5002-V2F1
1" x 1" FLANGE
MT5003-V2T1
1" x 1" FNPT
MT5003-V2F1
1" x 1" FLANGE
MT7002-V2T1
1" x 1" FNPT
MT7002-V2F1
1" x 1" FLANGE
MT7003-V2T1
1" x 1" FNPT
MT7003-V2F1
1" x 1" FLANGE
MT9002-V2T1
1" x 1" FNPT
MT9002-V2F1
1" x 1" FLANGE
MT16002-V2T1 1.25" x 1.25" FNPT
MT16002-V2F1 1.25" x 1.25" FLANGE
PERFORMANCES
GPM/TDH (MAX)
MATERIALS
PUMP, O-RING
MAX (PSIG)
STD/DUAL CF
MAX TEMP (F)
PP/PVDF RWE
POWER
(HP)
PUMP FRAME
TYPE
WT (LBS.)
PUMP END
9 / 37'
9 / 37'
9 / 47'
9 / 47'
13 / 60'
13 / 60'
15 / 110'
15 / 110'
22 / 112'
22 / 112'
25 / 130'
25 / 130'
30 / 125'
30 / 125'
31 / 160'
31 / 160'
45 / 160'
45 / 160'
60 / 180'
60 / 180'
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
1/3 HP
1/3 HP
1/3 or 1/2 HP
1/3 or 1/2 HP
1/2 HP
1/2 HP
3/4 or 1 HP
3/4 or 1 HP
1 or 1-1/2 HP
1 or 1-1/2 HP
1-1/2 or 2 HP
1-1/2 or 2 HP
2 or 3 HP
2 or 3 HP
3 or 5 HP
3 or 5 HP
5 or 7-1/2 HP
5 or 7-1/2 HP
10 or 15 HP
10 or 15 HP
A-63
A-63
56-C
56-C
56-C
56-C
56-C
56-C
56-C
56-C
143/5-TC
143/5-TC
143/5-TC
143/5-TC
182/4-TC
182/4-TC
182/4-TC
182/4-TC
213/5, 254/6-TC
213/5, 254/6-TC
11 w/ motor
11 w/ motor
8
8
8
9
8
9
8
9
11
12
11
12
61
62
61
62
93
94
PERFORMANCES
GPM/TDH (MAX)
MATERIALS
PUMP, O-RING
MAX (PSIG)
STD/DUAL CF
MAX TEMP (F)
PVDF
POWER
(HP)
PUMP FRAME
SIZE
WT (LBS)
PUMP END
9 / 37'
9 / 37'
9 / 47'
9 / 47'
13 / 60'
13 / 60'
15 / 110'
15 / 110'
22 / 112'
22 / 112'
25 / 130'
25 / 130'
30 / 125'
30 / 125'
31 / 160'
31 / 160'
45 / 160'
45 / 160'
60 / 180'
60 / 180'
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
1/3 HP
1/3 HP
1/3 or 1/2 HP
1/3 or 1/2 HP
1/2 HP
1/2 HP
3/4 or 1 HP
3/4 or 1 HP
1 or 1-1/2 HP
1 or 1-1/2 HP
1-1/2 or 2 HP
1-1/2 or 2 HP
2 or 3 HP
2 or 3 HP
3 or 5 HP
3 or 5 HP
5 or 7-1/2 HP
5 or 7-1/2 HP
10 or 15 HP
10 or 15 HP
A-63
A-63
56-C
56-C
56-C
56-C
56-C
56-C
56-C
56-C
143/5-TC
143/5-TC
143/5-TC
143/5-TC
182/4-TC
182/4-TC
182/4-TC
182/4-TC
213/5, 254/6-TC
213/5, 254/6-TC
12 w/ motor
12 w/ motor
9
10
9
10
9
10
9
10
12
13
12
13
66
68
66
68
100
102
www.warrender.com
(14)
sales@warrender.com

15. MT Series
3500 RPM (60 Hz)
MT Series
2900 RPM (50 Hz)
www.warrender.com
(15)
sales@warrender.com

16. MT - SP Series
Regenerative Turbine Self-Primer Pumps
P
The same basic features of MT pumps apply to the MT-SP series design with
the addition of a self-contained, self-priming pump casing. MT-SP pumps provide
smooth, continuous, leak-proof operation where top unloading is required.
Performances
•
•
•
•
Flows to 60 GPM (14 m3/h)
Heads to 180 FT (50 m)
System pressures to 110 PSIG (8 bar)
Temperatures to: 230°F (110°C)
Options
• Dual containment shell
PARTS LIST
10
20
30
40
50
62
70
75
78
85
86
88
90
www.warrender.com
(16)
sales@warrender.com
Rear Casing
External Magnet
Internal Magnet
Impeller
O-ring
Rear Ring
Shaft
Bearings
Bracket
Pump Head
Check Valve +
Gasket set
Rear Wet End
(kit + rear casing)
Wet End

17. MT - SP Series
MTSP Dimensions & Specifications
MTSP with Foot Mounted Motor
MTSP with Pedestal Mounted Motor
MODEL NO.
NPT
MTSP 2503
MTSP 3503
MTSP 5503
MTSP 7503
MTSP 9502
MTSP 16502
MTSP 2503
MTSP 3503
MTSP 5503
MTSP 7503
MTSP 9502
MTSP 16502
SUCTION
FLANGE
1/2"
3/4"
1"
1"
1"
1-1/4"
DISCHARGE
NPT
FLANGE
1/2" 150# RF ANSI
3/4" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1.25" 150# RF ANSI
1/2" 150# RF ANSI
3/4" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1" 150# RF ANSI
1.25" 150# RF ANSI
www.warrender.com
S
X
Y
Y2
CP
F2
LJ
WB
2.50
2.79
3.14
5.35
5.35
7.87
1/2"
3/4"
1"
1"
1"
1-1/4"
D
6.75
7.04
7.40
11.33
11.33
14.56
6.50
6.69
6.69
8.93
8.93
10.23
6.13
6.77
6.77
8.22
8.22
10.03
0.62
0.66
0.66
0.25
0.25
0.86
4.75
5.66
6.18
7.51
7.51
9.64
N/A
N/A
N/A
2.87
2.87
2.79
N/A
N/A
N/A
7.59
7.59
11.41
N/A
N/A
N/A
6.10
6.10
9.84
2.50
2.79
3.14
5.35
5.35
7.87
6.75
7.04
7.40
11.33
11.33
14.56
8.25
8.50
8.50
10.74
10.74
12.40
7.87
8.58
8.58
10.03
10.03
12.12
0.62
0.66
0.66
0.25
0.25
0.86
4.75
5.66
6.18
7.51
7.51
9.64
N/A
N/A
N/A
2.87
2.87
2.79
N/A
N/A
N/A
7.59
7.59
11.41
N/A
N/A
N/A
6.10
6.10
9.84
(17)
sales@warrender.com

18. MT - SP Series
MODEL NO.
PP / TEFC
PORT SIZES
SUCT/DISCH
PERFORMANCES
GPM/TDH (MAX)
MATERIALS
PUMP, O-RING
MAX (PSIG)
STD/DUAL CF
MAX TEMP (F)
PP/PVDF RWE
POWER
(HP)
PUMP FRAME
NEMA SIZE
WT (LBS.)
PUMP END
MTSP2503-P1T1
MTSP2503-P1F1
MTSP3503-P2T1
MTSP3503-P2F1
MTSP5503-P2T1
MTSP5503-P2F1
MTSP7503-P2T1
MTSP7503-P2F1
MTSP9502-P2T1
MTSP9502-P2F1
MTSP16502-P2T1
MTSP16502-P2F1
1/2" x 1/2" FNPT
1/2" x 1/2" FLANGE
3/4" x 3/4" FNPT
3/4" x 3/4" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1.25" x 1.25" FNPT
1.25" x 1.25" FLANGE
9 / 47'
9 / 47'
15 / 110'
15 / 110'
25 / 130'
25 / 130'
31 / 160'
31 / 160'
45 / 160'
45 / 160'
60 / 160'
60 / 160'
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
PP, EPDM
110
110
110
110
110
110
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
140 / 180
1/3 or 1/2 HP
1/3 or 1/2 HP
3/4 or 1 HP
3/4 or 1 HP
1-1/2 or 2 HP
1-1/2 or 2 HP
3 or 5 HP
3 or 5 HP
5 or 7-1/2 HP
5 or 7-1/2 HP
10 or 15 HP
10 or 15 HP
56-C
56-C
56-C
56-C
143/5-TC
143/5-TC
182/4-TC
182/4-TC
182/4-TC
182/4-TC
213/5, 254/6-TC
213/5, 254/6-TC
10
10
10
11
13
14
70
70
70
70
105
105
MODEL NO.
PVDF / TEFC
PORT SIZES
SUCT/DISCH
PERFORMANCES
GPM / TDH (MAX)
MATERIALS
PUMP, O-RING
MAX (PSIG)
STD/DUAL CF
MAX TEMP (F)
PVDF
POWER
(HP)
PUMP FRAME
NEMA SIZE
WT (LBS.)
PUMP END
MTSP2503-V1T1
MTSP2503-V1F1
MTSP3503-V2T1
MTSP3503-V2F1
MTSP5503-V2T1
MTSP5503-V2F1
MTSP7503-V2T1
MTSP7503-V2F1
MTSP9502-V2T1
MTSP9502-V2F1
MTSP16502-V2T1
MTSP16502-V2F1
MTSP16503-V2T1
MTSP16503-V2F1
1/2" x 1/2" FNPT
1/2" x 1/2" FLANGE
3/4" x 3/4" FNPT
3/4" x 3/4" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1" x 1" FNPT
1" x 1" FLANGE
1.25" x 1.25" FNPT
1.25" x 1.25" FLANGE
9 / 47'
9 / 47'
15 / 110'
15 / 110'
25 / 130'
25 / 130'
31 / 160'
31 / 160'
45 / 160'
45 / 160'
60 / 160'
60 / 160'
60 / 180'
60 / 180'
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
PVDF, VITON
110
110
110
110
110
110
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
110 / 150
180
180
180
180
180
180
180
180
180
180
180
180
180
180
1/3 or 1/2 HP
1/3 or 1/2 HP
3/4 or 1 HP
3/4 or 1 HP
1-1/2 or 2 HP
1-1/2 or 2 HP
3 or 5 HP
3 or 5 HP
5 or 7-1/2 HP
5 or 7-1/2 HP
10 or 15 HP
10 or 15 HP
10 or 15 HP
10 or 15 HP
56-C
56-C
56-C
56-C
143/5-TC
143/5-TC
182/4-TC
182/4-TC
182/4-TC
182/4-TC
213/5-TC or 254/6-TC
213/5-TC or 254/6-TC
213/5-TC or 254/6-TC
213/5-TC or 254/6-TC
14
15
14
15
17
18
76
77
76
77
121
123
121
123
3500 RPM (60 Hz)
www.warrender.com
(18)
sales@warrender.com

19. Data Sheet
WARRENDER SEAL-LESS MAG-DRIVE PUMP DATA SHEET
Application
Current Pump
When Needed:
Immediate
1 Week
Manufacturer:
Model Number:
Impeller Dia:
Material:
Suc. Port Dia:
Dis. Port Dia:
Sys. Pipe Size:
HP / RPM:
1 Month
Date:
Distributor:
Location:
Contact:
Phone:
Fax:
Customer:
Location:
Quantity:
Fluid / Concentration:
3-6 Months
Future
Particles Present ?
Item / Tag No.:
Max.
ANSI
Min.
Unknown
% by Volume:
Non-ANSI
Self-Primer
Material: Alloy
Non-Metallic
Ports:
NPT
Flanged
O-Ring / Gasket Material:
Motor:
TEFC
Chem Duty
Capacity (GPM)
Suc. Press (PSIG)
Dis. Press (PSIG)
TDH (ft)
Temp. (deg. oF)
Spec. Gravity
Viscosity (cPs)
Vapor Press. (PSIA)
Specific Heat
Tank Volume (gal.)
NPSH (ft)
Suction Lift (ft)
Other
Explosion Proof
Could pump run dry ?
Yes
Could pump be Dead-Headed ?
No
Yes
No
Mounting Configuration:
Bearing Frame for Base Mounting
Close Coupled
Options:
Suggested Pump Selection:
Centrifugal
No
Pump Design:
Design
Pump Model#:
Yes
If Yes, Particle Size:
Particle Hardness:
Turbine
Self-Priming
Rotary Vane
Pump Material:
Base Plate
LINEMAN Power Monitor (req. for warranty)
Thermocouple Probe (non-wetted)
Jacketed Casing
Self-Cleaning Strainer (MCA Models)
System Sketch
Fax this sheet to: Warrender, Ltd. 847-247-8680
www.warrender.com
(19)
sales@warrender.com

20. WARRENDER, LTD.
Authorized Distributor:
28401 N. Ballard Dr., Suite H
Lake Forest, IL 60045
Phone: 847-247-8677 Toll Free: 888-24 PUMPS Fax: 847-247-8680
web site: www.warrender.com
email: sales@warrender.com
NON-MET 04