Densyl Tape is a cold applied waterproofing tape which remains plastic over a wide temperature range - Densyl Tape is non-hardening and non-cracking. Densyl Tape is highly resistant to mineral acids, alkalis, salts and highly impermeable to water, water vapour and gases. Densyl Tape is used to protect underground buried or exposed pipes, rods, cables, valves and metal fittings from corrossion.
Densyl Tape Composition - non-woven synthetic fibre fabric impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons (petrolatum) and insert siliceous fillers.
ICT role in 21st century education and its challenges
Densyl Tape - Waterproofing Tape - Denso Duct Sealing Systems
1. REF: TDS153/01.01
DENSYL TAPE
DESCRIPTION
A cold applied tape which remains plastic over a wide temperature range. It is
non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis,
salts and micro-organisms and highly impermeable to water, water vapour and
gases. For the protection of buried or exposed pipes, rods, cables, valves and
metal fittings from corrosion. Waterproofing of cables and thermal insulation.
COMPOSITION
Non-woven synthetic fibre fabric impregnated and coated with a neutral
compound based on saturated petroleum hydrocarbons (petrolatum) and inert
siliceous fillers. It is formulated particularly for use at tropical temperatures.
The tape is supplied in rolls in a range of widths.
TYPICAL PROPERTIES
TEST METHOD
DATA
Breaking Strength
ASTM D1000
200 N/50mm minimum
Elongation at Break
ASTM D1000
10% average
Breakdown Voltage (55% overlap)
16kV minimum
Resistance to Cathodic Disbonding
ASTM G8 – 30 days
Resistance to Acids, Alkalis and Salts
Excellent
Temperature Range
For Application
For Service
5°C to 55°C
-20°C to 70°C
Roll Length
Thickness
Weight
RECOMMENDED PRIMER
<500mm²
10 metres minimum
ASTM D1000
1.15mm average
1.44 kg/m² average
Denso Paste, Denso Priming Solution
Important
Winn & Coales (Denso) Ltd pursue a policy to develop and continually improve all of our products and therefore the information
given in this data sheet is intended as a general guide and does not constitute a warranty of specification. However, our sales
personnel are committed to assist the user in establishing the suitability of the product for its intended purpose and additional
specific information is available on request.
Winn & Coales (Denso) Ltd operate a Quality Management System registered to BS EN ISO 9002 1994 (Certificate No. FM01548).
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK