CSD Sealing Systems provide market-leading, advanced specification fire-proof, gastight and watertight sealing for cable and pipe entries. CSD RISE Duct Seals consists of only 2 products : the elasticity and high bonding strength of the FIWA/NOFIRNO sealant offers a flexible seal, which resists movement, shock, vibration and high pressure. CSD RISE duct seal will prevent the migration of dangerous gases and provide flood protection for more than 50 years.

1. CSD Sealing Systems Ltd
CSD Sealing Systems
The most advanced product range of
fireproof, gastight and watertight sealing of cable and pipe
entries
Distributor Product Awareness Training
Thorne & Derrick 16th
October 2012

2. Agenda
 Introduction – today’s objectives (JT/IJ)
 CSD & a high level product overview (IJ)
 Installation Video (Rise Duct) & Installation demonstration – Rise & Rise Rapid
Duct Seal (IJ/PW)
 CSD Services - Technical advice, Site surveys, training and installation support
 Market specific information (PW/IJ) - table hand-out
 CSD quotes & orders (AJ/AM) – customer contact sheet hand-out
 Questions & Answers (All)
 Close & Lunch
CSD Sealing Systems Ltd

3. CSD Sealing Systems Ltd
Why are we here?
TO PROVIDE A SOLUTION FOR
CABLE & PIPE SEALING PROBLEMS.
 Environmental and Climate changes are creating new challenges and
problems affecting all types of infrastructure and across many different
types of industry.
 Issues
1) WATER Ingress (flooding, higher water table and more buildings now
at higher risk)
2) FIRE (equipment & building fires are costly and cause massive
inconvenience and business interruption)
3) GAS (Reclaimed land, risk of explosion through gas migration

4. CSD Sealing Systems Ltd
Some common challenges
 Sealing against water ingress through cable duct entries, even when
ducts are distorted or oversized.
 Sealing large power cables even trefoil cables and cables passing
through at an angle
 Complying with new fire test BS EN 1366-3 penetration seals
 Ensuring compliance with ATEX and DSEAR regulations
 Penetrating water and gas tight boundaries and bund wall protection
with potential for submersion in petrol, diesel or transformer oils.
 Minimising explosion risk and preventing migration of dangerous
gases, (including methane, hydrogen sulphide & chlorine) and dust
between zoned areas
 Preventing rodent ingress
 Watertight sealing of penetrations with earthing strips.
 Easy re-entry to add or remove cables

5. CSD Sealing Systems Ltd
Substation fire in Nottingham
 Almost 4,000 properties and
businesses were left without
power for more than 12 hours

6. CSD Sealing Systems Ltd
CSD Challenges
 Over the past few years CSD have been involved in numerous
projects to seal or replace failing duct seals.

7. CSD Sealing Systems Ltd
CSD Challenges
Additional examples

8. CSD Sealing Systems Ltd
CSD Solutions

9. CSD Sealing Systems Ltd
The RISE & RISE Rapid Duct Seal Solution
 The RISE duct seal provides an effective and simple
solution to all fire, gas and watertight duct sealing
requirements.

10. CSD Sealing Systems Ltd
The benefits…..
 Ensures DSEAR gastight compliance even in heavily
filled cable ducts using RISE sleeves to guarantee
cable separation
 Easy re-entry for adding, removing or replacing cables
 Provides 50 years protection
 High levels of water and gas tightness
 WIMES compliant
 Up to 4 hours of fire protection when using fireproof
version
 Quick and easy to install in both vertical and horizontal
ducts
 No frame required and can seal irregular shaped
openings
 Seals ducts when there is running water
 Resistant to Methane, Hydrogen Sulphide and
Chlorine
 Suitable for trefoil and large power cables

11. CSD Sealing Systems Ltd
The SLIPSIL Sealing Plug Solution
 The SLIPSIL Sealing Plug seal provides an effective and
simple solution to gas and watertight duct sealing
requirements, ideally suited for empty ducts or single
entry cables

12. CSD Sealing Systems Ltd
The benefits….. Suitable for empty ducts
 Suitable for single power cables or pipes
up to 168mm diameter
 High levels of gas & water-tightness
 Ensures ATEX & DSEAR compliance
 Quick and easy to install
 Re-usable

13. CSD Sealing Systems Ltd
The Nofirno coated mineral wool boards
Solution
 The Nofirno coated mineral wool board provides an
effective and simple solution to sealing fire rated
boundaries, ideally suited for oversized entries

14. CSD Sealing Systems Ltd
The benefits…..
 Simple solution for oversized openings
 Suitable for up to 120 minutes fire
protection in accordance with new fire test
BS EN 1366-3 for penetration seals
 Easy addition of new cables
 High thermal insulation properties
 Highly cost effective
 Waterproof coating

15. CSD Sealing Systems Ltd
SEALED
EXAMPLES

16. CSD Sealing Systems Ltd
Heathrow Terminal 5 – Service Tunnel

17. CSD Sealing Systems Ltd
Heathrow T5 substation – EDF Energy

18. CSD Sealing Systems Ltd
Dublin substation – ESB

19. CSD Sealing Systems Ltd
Dublin substation - ESB

20. CSD Sealing Systems Ltd
Main substation Olympic Park - Kings Yard - EDF Energy

21. CSD Sealing Systems Ltd
Hackney substation – SEESA National Grid Alliance

22. CSD Sealing Systems Ltd
Bolt on frames

23. CSD Sealing Systems Ltd
Royal Navy Destroyer – Type 45

24. CSD Sealing Systems Ltd
Royal Navy Destroyer – Type 45

25. CSD Sealing Systems Ltd
The RISE Duct Seal – Installation video &
Installation demonstration
Installation video available to view at
www.csdsealingsystems.co.uk

26. CSD Sealing Systems Ltd
CSD Services
Survey
Design
Training
Installation support
Installation
Through life

27. CSD Sealing Systems Ltd
The RISE Duct Seal – Approved Installers
National network of
approved installers

28. Why provide training, installation
support and technical advice?
Technical Advice - Ensuring the client has the right sealing solution
for their project is essential :-
The product should meet specification/certification requirements.
Impacts on Safety or costs could risk competitor products being
chosen on future projects.
CSD Sealing Systems Ltd

29. Cont’d
Training - Penetrations that are not sealed correctly have the
potential to fail, resealing incurs additional costs to the client and/or
contractors and can damage the reputation of the installer, the
product, suppliers and CSD. This could impact existing markets and
business growth.
Installation support - CSD provide training both on and off site,
installation support ; prior i.e. site surveys , during installation and
we also provide technical advice. This supports good installation
and can prevent sealing failure.
CSD Sealing Systems Ltd

30. Failed seals and potential causes?
CSD Sealing Systems Ltd

31. Market Specific Information – See table
Market responsibility - Phil
Westerman
Electricity T &D
Utility – Water
Energy – onshore
wind/Hydro/Tidal
Energy –Biomass
Petrol Forecourts
Telecommunications
Market Responsibility – Ian
Joynson
Oil & Gas Onshore
General Industrial &
Construction
Energy – Nuclear
Energy – Coal/Gas/CHP
Motorway
Rail
IT Data Centre
CSD Sealing Systems Ltd

32. Market specific information – cont’d
The following markets are highly technical, have strict certification
requirements and are high risk safety critical environments. For
these reasons CSD need to have client involvement, please
contact us to discuss.
Market Responsibility – Peter Litchfield
Naval
Marine
Oil and Gas offshore
Energy – Wind Offshore
CSD Sealing Systems Ltd

33. CSD Customer quote & order requirements –
What information do we ask for and why?
 Customer contact sheet – to support an accurate quote - review
 Meets System requirements
 Ensure product supplied meets specification/project
requirements and provide technical advice.
 Identify any training, site survey and install support
requirements.
CSD Sealing Systems Ltd

34. CSD Sealing Systems Ltd
Any questions?

35. CSD Sealing Systems Ltd
CSD Sealing Systems Ltd
Unit 6, Easter Park, Nelson Park West
Cramlington NE23 1WQ
Tel: 01670 739 970
Fax: 01670 716 548
E-mail: info@csdsealingsystems.co.uk
Website: www.csdsealingsystems.co.uk