training seminar on airport authority of india,jaipur

1. SUBMITTED TO :
MR. RAVI GOYAL
( Assistant Professor )
SUBMITTED BY:
SUNITA(10EC88)

6. Services Provided By AAI

7. AAI
ATC
CNS

10. Approach Control:
Responsible for providing all ATC services within their
airspace .
 Area Control :
provides services to aircraft between airports.

11. To describe airspace with specific dimensions, in which a
Flight Information Service and an alerting service are
provided.
DELHI
MUMBAI
GUWATTI
CHENNAI
KOLKATTA

12. COMMUNICATION
CNS
SURRVIELLENCE
NAVIGATIONAL
-AIDS

14. 3.Air to air : This includes communication between the pilots of two
aircrafts in the air. Such type of communication also uses VHF and HF
frequencies.
For communication, A frequency band from 118MHz to 136 MHz is
used .

17. DVOR:
It is the Doppler Very High Frequency
Omni Radio Range which measures the
azimuth angle with respect to the north.
DME :
Provides pilots with a slant
range measurement of
distance to the runway in nautical
miles.

18.  Provides precision guidance to an aircraft
approaching and landing on a runway, using a
combination of radio signals.
ILS
GLIDE PATH
(GP)
LOCALIZER

19.  Provides runway centerline guidance to
aircraft, but not the glide slope information.

22.  An antenna array is sited to one side of the runway
touchdown zone.
 LOC carrier frequencies range
108.10 MHz to 111.95 MHz.
At Jaipur Airport it is 109.9 MHZ.
 The glide slope transmits
no identification signal.

23.  It is installed in each airport to monitor
the movement of all the aircrafts within its
region of operation.
•Range : 2700 to 2900 MHz .

24. Primary Radar :
• The radar system measures the time required for a radar
echo to return and the direction of the signal.
Range : 2700 to 2900 MHz .
•
 Secondary Radar :
•It uses a second radar antenna attached to the
top of the primary radar antenna to transmit
and receive area aircraft data for barometric
altitude, identification code, and emergency
conditions.

26. 1.DFMD:
 Every passenger has to go through this frame when any metal
particle is possessed by passenger.
It gives indication with both visual &
audio aid.
2.HHMD:

27. X-Ray is used in x-Ray baggage systems .
In this a baggage put in scanner , then it would show color
according to material.
Baggage

28. CCTV is the use of video
cameras to transmit a signal to a
specific place, on a limited set of
monitors.
ETD is used to detect
explosive materials.