Melt Flow Index Tester, Melt Flow Index Tester Manufacturers and Suppliers In...
ECO Germany
1. Wenzhou Jiatai Latex Product Co., Ltd.
Dongfeng Developing Zone
Feiyun Town
Ruian, Zhejiang
Chine 325207
T e s t R e p o r t N o. 17910-1
Sample description by
client:
Latex pillow
Kind of sample: Latex pillow
Client: Wenzhou Jiatai Latex Product Co., Ltd., Ruian,
Zhejiang
Sampling by: Client
Date of arrival of sample: 16 November 2007
Date: 21 December 2007
Page: 1
Number of pages: 5
Test parameter: • VOC (Volatile organic compounds, test chamber)
after 2 and 7 days
• Carbon disulfide (CS2, test chamber) after 2 days
• Nitrosamines (test chamber) after 2 days*
• Odor
• Formaldehyde
• Filler, polymer content
Testing laboratory: eco-INSTITUT GmbH, Köln, except *
* subcontracted
2. Page 2/5 of test report „Wenzhou Jiatai Latex Product Co., Ltd.“, project no. 17910-1 from 21 December
2007
Note: This report only refers to the above described sample. Publishing in parts requires authorisation.
VOC (Volatile organic compounds, test chamber)
Test after 2 days
Serial no. Substance CAS No.
Emission after 2 d
[µg/m³]
1 Aromatic hydrocarbons
1-1 Toluene 108-88-3 2
1-16 1-Isopropyl-4-methylbenzene (p-cymene) 99-87-6 5
1-19 1.3-Diisopropylbenzene 99-62-7 2
2 Saturated aliphatic hydrocarbons (n-, iso- and
cyclo-)
2-7.5 n-Undecane 1120-21-4 1
3 Terpenes
3-4 Limonene 138-86-3 7
5 Aromatic alcohols
5-1 Phenol 108-95-2 10
5-2 Butylated hydroxytoluene 128-37-0 140
8 Ketones
8-8 Acetophenone 98-86-2 4
other non-calibrated and / or non-identified
substances without NIK
--- Diethylamine --- 19
--- Butylethers --- 2
--- Not identified --- 2
--- Ester, not identified --- 6
--- Terpene --- 4
--- Terpenoid compound --- 2
--- Benzothiazene --- 7
--- Sesquiterpene --- 16
--- Sesquiterpene --- 2
--- Not identified --- 2
Test after 7 days
Serial no. Substance CAS No.
Emission after 7 d
[µg/m³]
1 Aromatic hydrocarbons
1-1 Toluene 108-88-3 2
3 Terpenes
3-4 Limonene 138-86-3 2
5 Aromatic alcohols
5-1 Phenol 108-95-2 3
5-2 Butylated hydroxytoluene 128-37-0 260
8 Ketones
8-8 Acetophenone 98-86-2 1
other non-calibrated and / or non-identified
substances without NIK
--- Diethylamine --- 6
--- Benzothiazene --- 5
--- Sesquiterpene --- 1
--- Sesquiterpene --- 12
--- Not identified (SVOC) --- 4
< = below assessment limit
Assessment limit: 1 µg/m³ toluene equivalent
3. Page 3/5 of test report „Wenzhou Jiatai Latex Product Co., Ltd.“, project no. 17910-1 from 21 December
2007
Note: This report only refers to the above described sample. Publishing in parts requires authorisation.
Sample geometry: sealed edges: No
Loading related to: Area
Sample volume: 19 cm x 19 cm x 12 cm
Chamber conditions: following DIN ISO 16000-9 and DIN EN 717-1
Volume: 0,125 m³
Temperature: 23°C
Rel. Humidity: 50 %
Pressure: Normal
Air: Clean
Air change rate: 1,0 h –1
Air velocity: 0,3 m/s
Loading: 1,3 m²/m³
Specific air flow rate: 0,77 m³/m²*h
Air sampling: 2 days and 7 days after loading of test
chamber
Test method: DIN ISO 16000-6
Carbon disulfide (CS2, test chamber) after 2 days
Substance
Emission after 2 d
[µg/m³]
Orientation value
[µg/m³]
Carbon disulfide CS2 3 50
< = below assessmentlimit
Assessmentlimit: 1 µg/m³
Sample geometry: see VOC (Volatile organic compounds) test chamber
Chamber conditions: see VOC (Volatile organic compounds) test chamber
Test method: DIN ISO 16000-6
Nitrosamines (test chamber) after 2 days
Substance
Emission after 2 d
[ng/m³]
Orientation Value
[ng/m³]
N-Nitrosodimethylamine < 100 ---
N-Nitrosomethylethylamine < 100 ---
N-Nitrosodiethylamine < 100 ---
N-Nitrosodiisopropylamine < 100 ---
N-Nitrosodipropylamine < 100 ---
N-Nitrosodibutylamine < 100 ---
N-Nitrosopiperidine < 100 ---
N-Nitrosopyrrolidine < 100 ---
N-Nitrosomorpholine < 100 ---
Total: < 100 300
4. Page 4/5 of test report „Wenzhou Jiatai Latex Product Co., Ltd.“, project no. 17910-1 from 21 December
2007
Note: This report only refers to the above described sample. Publishing in parts requires authorisation.
< = below assessment limit
Assessment limit: 100 ng/m³
Sample geometry and chamber conditions: see VOC (Volatile organic compounds) test chamber
Test method: BGI 505-23.
Formaldehyde (test chamber) after 2 days
Substance CAS No-
Emission after 2 d
[ppm]
Formaldehyde (Methanal) 50-00-0 < 0,01
< = below assessment limit
Assessment limit: 0,01 ppm = 12 µg/m³
Test method: DIN ISO 16000-3 (DNPH-method)
Odor
Temperature
[°C]
Intensity of odor Kind of odor
40 2 rubber
Rating:
1 not perceptible
2 perceptible, not bothering
3 clearly perceptible, not bothering
4 bothering
5 strongly bothering
6 unbearable
Test method: following VDA-recommendation 270
5. Page 5/5 of test report „Wenzhou Jiatai Latex Product Co., Ltd.“, project no. 17910-1 from 21 December
2007
Note: This report only refers to the above described sample. Publishing in parts requires authorisation.
Filler, polymer content
Filler [weight/%]
Polymer content, with reference to the sample 96
Ash content (incl. zinc oxide), with reference to the sample 4
Filler content, with reference to the sample 1)
< 5
Polymer content [weight/%]
NR, with reference to the polymer content 2)
100
SBR, with reference to the polymer content 0
Remark:
1)
The amount of filler is calculated as difference between the amount of ash and zinc oxide, assuming that
the maximum of zinc oxide is 5 % of the total latex foam.
2)
If NR-content is below 5 %, the result will be 100 % SBR. Usually there will be no use of NR below 5 % in a
mixture of NR and SBR.
Demands:
Filler: ≤ 5 % ± 1 %
Polymer content: NR ≥ 95 %
Test methods: filler/ash: thermogravimetry; polymer content: IR/ATR.
Cologne, 21 December 2007
Dr. H.-U. Krieg
(Technical Manager)