Multi-Link’s Cell Signal Amplifier connects directly to any M2M enabled cellular application or cellular device and provides up to 15dB gain in uplink signal strength (e.g. a router, modem, module, or gateway). The ML-CSA 3500 3G Cell Signal Amplifier is superior to other cell amplifiers & hi-gain antennas: Passive Bypass Technology is a fail-safe feature that is designed to allow the cell signal amplifier to bypass itself during loss of power, when a fault is detected, or when amplification is not needed. NO other device has this feature and it’s vital for applications that are mission-critical for safety, security & liability reasons, e.g. Fire & Security Alarms and Patient Monitoring. Auto Gain & Oscillation Control will automatically adjust the gain and output power to provide signal consistency if a signal anomaly occurs and to prevent interference with the Carrier’s network. If amplification is not needed, the booster goes into Passive Bypass Mode. Variable Input Power Ranges: +8.0 to 36.0 VDC which is beneficial for applications with a variety of power requirements. FCC & IC Certified and Carrier Pre-Approved

1. NEW! M2M 3G Cell Signal Amplifier
with Passive Bypass Technology
The ML‐CSA 3500 3G Cell Signal Amplifier is an ancillary “Plug & Play” device that connects
in‐line with any cellular‐enabled router, modem, module, or gateway. ML‐CSA 3500 boosts
uplink cell signal strength by up to 15dB to lock in your connection with cell towers. A
dependable cell connection is crucial for real time datacom applications, monitoring &
control of remote assets, either FIXED or MOBILE!
• 15 dB Gain w/ increased Signal & Data Connectivity
• FCC & Industry Canada (IC) Certified AND Carrier Approved
• Full “Plug & Play” Kit
• Patented Passive Bypass Technology: Unique FAIL‐SAFE feature that ensures the connected
cell device stays online, even if amplifier loses power or goes in stand‐by mode. Vital for
mission‐critical applications for safety, security, and liability reasons.
• Patented Auto Gain & Oscillation Control: Incrementally adjusts the gain and output power
to optimize the cell signal strength and prevent interference with the carrier network. If
amplification is not needed, the booster goes into Passive Bypass Mode.
• Variable Input Power Range: +8.0 to 36.0 VDC for a variety of M2M applications.
EXCLUSIVE Features!
More Features
Contact us for more info! 800.535.4651 or sales@multi-link.net
122 Dewey Drive | Nicholasville, KY 40356 | multi‐link.net