This document provides an overview of standard precautions and infection control procedures for a hospital induction training. It discusses standard precautions including hand hygiene, personal protective equipment, environmental cleaning, and respiratory etiquette. It also covers biomedical waste management, safe injection practices including needlestick injury management, and spill management procedures. The goal is to educate new hospital staff on universal safety protocols to prevent the transmission of infectious diseases.
3. Standard Precautions
• A set of infection control practices:
• Used to prevent transmission of diseases that can be acquired
by contact with blood, body fluids, non-intact skin (including
rashes), and mucous membranes
• Followed with
ALL Individuals,
ALL Specimens and
ALL Needle and Sharps.
4. Universal Precautions
• Infection control practices to avoid contact with patient’s body
fluids, by means of wearing the non-porous articles such as
medical gloves, goggles, and face shields
• Replaced by Standard Precautions
• In addition
• Measures to prevent contact (i.e. skin and mucosal)
transmission
5. Components of Standard Precautions
• Hand hygiene
• Personal protective equipment
• Routine environmental cleaning
• Respiratory hygiene and cough etiquette
• Appropriate handling of linen
• Biomedical waste management
• Safe use and disposal of sharps
7. 1. HAND RUB (Indications)
• Routine clinical rounds
and handling the patient
• Hands not visibly dirty,
not contaminated with blood/ body fluids
8.
9. 2. HAND WASH (Indications)
• Visibly dirty, contaminated with blood/ body fluids
• Exposure to Spore forming organisms, Nonenveloped viruses
• Handling patients having diarrhoea
• After using restroom
• Before handling Medication/ Food
16. Sequence for Putting on PPE
Hand hygiene
Gown
Mask or respirator
Goggles or face shield
Gloves
Combination of PPE will affect
sequence –
BE PRACTICAL
17. Sequence for Removing PPE
Gloves
Hand hygiene
Face shield or goggles
Gown
Mask or respirator
Hand hygiene
26. An occupational exposure is defined as
1. Percutaneous injury (e.g., needle stick or cut with a sharp instrument)
2. Splash injury
• Contact with the mucous membrane of the eye or mouth
• Contact with non-intact skin (particularly when the exposed skin is chapped,
abraded, or afflicted with dermatitis);
• Contact with the intact skin when the contact duration is prolonged (e.g., several
minutes or more) with blood or other potentially infectious body fluids.
27.
28. Agents transmitted
Agent Risk of transmission
Hepatitis B 5-30%
Hepatitis C 3-10%
HIV 0.3% (percutaneous)
0.09% (mucosal splash)
30. General measures:
Apply standard infection control precautions-
• Use appropriate PPEs
• Avoid wearing open footwear in high risk areas
• Adhere to hand hygiene
• Cover existing wounds, skin lesions, and all breaks
• HCWs with chronic skin disease (e.g. eczema) should avoid invasive
procedures
• Work surfaces disinfected: with 0.1 percent sodium hypochlorite solution.
• Clear up spillage
31. Precautions while handling Needle:
• Avoid unnecessary use
• Handle hollow bore needles with care
• Disposable needles should be used.
• Never recap needles- If unavoidable, use single hand-scoop tech.
• Never break/bend needles by hand
• Never pass the syringe in hand directly (use kidney tray)
• Dispose – in sharp box (white PPC) containing 10% sodium
hypochlorite
• Needles/sharps should not be left on trolleys and bed side tables
32. Needle Stick Injury Management
DO’s DON’Ts
Remove gloves Panic
Wash exposure site thoroughly with
running water
Put pricked finger in mouth
Irrigate with water/saline if
eyes/mouth have been exposed
Squeeze wound to bleed it
Wash skin with soap and water Use bleach, chlorine, alcohol,
betadine, iodine on the wound
33. Steps to be followed after NSI:
1. First aid
2. Report to designated nodal centre
3. Take first dose of PEP for HIV
4. Testing for HIV, HBV and HCV for both source and exposed
5. Risk assessment (based on type of injury and source status)
6. Decision on prophylactic treatment for HIV and HBV
7. Monitoring and follow up of HIV, HBV, and HCV status
8. Documentation and recording of exposure
37. Spill Management
• Blood & Body fluid spill
• Chemical spill
• Major spill (>30 ml)
• Minor spill (<30 ml)
38. Spill management
• Identify the spill.
• Put caution board.
• Declare CODE BROWN (call to 333) in case of major spill.
• Bring spill kit
• Wear PPE/gloves & mask.
• Use disposable paper towels or tissue papers to cover the spill.
• Pour disinfectant over the entire area of the spillage & let it remain for a contact time
period.
• The absorbent paper picked up & placed in the yellow bag with the help of forcep & label it
which type of spill.
• Carefully clean the spill site of any visible material from the edges of the spill to the center
with an aqueous detergent solution.
• Rinse the spill site with soap & water & air dry.
• Discard the PPE items & wash hand.
• Handed over to house keeping department & fill up incident form if needed.
39. MAJOR SPILL MINOR SPILL
More than 30 ml Less than 30 ml
Evacuate from the area
Declare CODE BROWN
No need to evacuate
use spill kit
Use all PPE Use gloves & mask
Use disinfectant 4% sodium
hypochlorite
Use disinfectant 1% sodium
hypochlorite
Fill up incident form No need to fill up incident
form
Use scooper Use forcep
Blood & Body fluid spill
40. Mercury spill management
• Do’s:
• Remove people and pets from the
spill area.
• Close all interior doors to the spill
area.
• Turn off heating and air conditioning
systems.
• Open all exterior windows and doors.
• Don’t:
• Do not touch the mercury. Never
vacuum;it will release mercury
vapour into the air.
• Never use a broom; it will break up
the mercury.
• Never pour mercury down the drain.
• Never walk around in contaminated
clothing or shoes.
• Never put mercury-contaminated
items in the washing machine.
41. • Evacuate area
• Put on PPE
• Locate mercury beads: Never touch with hands. Cardboard sheets should be
‘used to push the spilled beads of mercury together’
• Use syringe without a needle/eyedropper and sticky tape: to suck the beads
of mercury. Collected mercury needs to be placed slowly and carefully into an
unbreakable plastic container/glass bottle with an airtight lid half filled with
water.
• Collection in leak-proof bag or container: Place all the materials used during
the clean-up, including gloves, mercury spills collected from the spill area into
a leak-proof plastic bag or container with lid and seal properly and label.
• Hand over to Biomedical engineering department.
• Clear the spill area.
• Incident form has to be filled up.