This document provides specifications for a nickel-metal hydride battery, model HF-B1U. The battery has a nominal voltage of 1.2V and a typical capacity of 880mAh. It can be fast charged in about 1.2 hours with a charging current of 880mA. The battery has dimensions of 17.0mm width, 6.1mm thickness, and 48.0mm height and weighs approximately 18g. Charts show the battery's voltage over time during charging and discharging.
This document provides specifications for the Marathon L2V220 lead-acid battery including:
1. Technical specifications such as rated voltage, capacity, dimensions, and weight.
2. Constant current discharge rates in amps (A) at different voltages and times ranging from 3 minutes to 20 hours.
3. Constant power discharge rates in watts per block (W/block) at different voltages and times ranging from 3 minutes to 10 hours.
4. The manufacturer and part number for ordering.
This document provides specifications for a valve-regulated lead acid battery called the LC-PD1217P. It has a nominal voltage of 12V, rated capacity of 17Ah, and expected trickle life of approximately 6 years at 25°C or 10 years at 20°C. The battery measures 181mm x 76mm x 167mm and weighs approximately 6.5kg. It has M5 bolt and nut terminals and a standard gray resin case, with an optional black resin case also available.
This document provides specifications for a nickel-metal hydride battery, model HF-B1U. The battery has a nominal voltage of 1.2V and a typical capacity of 880mAh. It can be fast charged in about 1.2 hours with a charging current of 880mA. The battery has dimensions of 17.0mm width, 6.1mm thickness, and 48.0mm height and weighs approximately 18g. Charts show the battery's voltage over time during charging and discharging.
This document provides specifications for the Marathon L2V220 lead-acid battery including:
1. Technical specifications such as rated voltage, capacity, dimensions, and weight.
2. Constant current discharge rates in amps (A) at different voltages and times ranging from 3 minutes to 20 hours.
3. Constant power discharge rates in watts per block (W/block) at different voltages and times ranging from 3 minutes to 10 hours.
4. The manufacturer and part number for ordering.
This document provides specifications for a valve-regulated lead acid battery called the LC-PD1217P. It has a nominal voltage of 12V, rated capacity of 17Ah, and expected trickle life of approximately 6 years at 25°C or 10 years at 20°C. The battery measures 181mm x 76mm x 167mm and weighs approximately 6.5kg. It has M5 bolt and nut terminals and a standard gray resin case, with an optional black resin case also available.
This document provides instructions for using the Panther7 AC Adapter and Smart Charger with LCD Display. It can charge laptop batteries independently of the laptop, power laptops and other devices, and indicates charging status on an LCD screen. The adapter has interchangeable DC connectors for over 100 laptop models and provides voltages from 5V to 22V. It has safety protections like overheating, overvoltage, overcurrent and short circuit protection.
This document provides specifications for a 6F22 E-Block rechargeable nickel-metal hydride battery with a nominal voltage of 8.4V (9V) and maximum capacity of 220mAh. The battery has standard charging at 0.1C for 14 hours and quick charging at 0.2C for 6-6.5 hours. It can be discharged at rates from 0.2C to 2.0C and operates at temperatures from -20°C to 60°C for discharge and 0°C to 45°C for charge. Graphs show the battery's voltage over time for standard and quick charging and its capacity retention over 12 months of storage.
AccuPower Charger AC Adapter: APSM800-1 Datenblatt DatasheedAkkuShop.de
The document provides specifications for the AccuPower Chargers power supply. It has an input of 100-240V AC at 50-60Hz and outputs 12-13V DC at 800mA. The DC output plug has a diameter of 2.5mm, inner diameter of 5.5mm, and is 10-12mm in length.
GP Batetry GP40AAAM Datenblatt DatasheedAkkuShop.de
This data sheet provides specifications for a rechargeable nickel metal hydride cylindrical cell battery.
1. The battery has a nominal voltage of 1.2V, capacity of 400mAh minimum and 428mAh typical, and dimensions of 10.2mm diameter and 29.2mm height.
2. It can be fast charged at rates between 0.5C to 1C (200-400mA) with charge termination control recommended, and has a service life of over 500 charge/discharge cycles.
This document lists mobile phones, PDAs, GPS devices, and game consoles and whether they are compatible with Bluetooth headsets and car kits from various manufacturers. It shows that most Nokia and Sony Ericsson phones as well as Blackberries, iPhones, and other smartphones are compatible, while older or less common models usually lack compatibility. Several GPS navigation systems and a few PDAs and media devices are also included and noted as compatible or not.
This document provides specifications for a KR-5000DEL lithium-ion cell, including:
1) The cell has a nominal capacity of 5000mAh and nominal voltage of 1.2V.
2) Standard charging current is 500mA and fast charging current is 7500mA, with standard charging time of 14-16 hours and fast charging time of about 1 hour.
3) The cell has an average internal impedance of 3.5mΩ and dimensions of 33.2 x 59.5 mm with a weight of 150g.
1) The document introduces eneloop rechargeable batteries as an alternative to disposable batteries, highlighting their reusability and environmental friendliness.
2) Eneloop batteries can be recharged up to 1,000 times and then recycled, making them more cost effective than disposable batteries over time. They also avoid the waste of disposable batteries.
3) Eneloop batteries retain their charge for a long time, with almost full power even after a year without recharging, unlike other rechargeable batteries that require periodic charging to maintain their power.
This document provides instructions for using the Panther7 AC Adapter and Smart Charger with LCD Display. It can charge laptop batteries independently of the laptop, power laptops and other devices, and indicates charging status on an LCD screen. The adapter has interchangeable DC connectors for over 100 laptop models and provides voltages from 5V to 22V. It has safety protections like overheating, overvoltage, overcurrent and short circuit protection.
This document provides specifications for a 6F22 E-Block rechargeable nickel-metal hydride battery with a nominal voltage of 8.4V (9V) and maximum capacity of 220mAh. The battery has standard charging at 0.1C for 14 hours and quick charging at 0.2C for 6-6.5 hours. It can be discharged at rates from 0.2C to 2.0C and operates at temperatures from -20°C to 60°C for discharge and 0°C to 45°C for charge. Graphs show the battery's voltage over time for standard and quick charging and its capacity retention over 12 months of storage.
AccuPower Charger AC Adapter: APSM800-1 Datenblatt DatasheedAkkuShop.de
The document provides specifications for the AccuPower Chargers power supply. It has an input of 100-240V AC at 50-60Hz and outputs 12-13V DC at 800mA. The DC output plug has a diameter of 2.5mm, inner diameter of 5.5mm, and is 10-12mm in length.
GP Batetry GP40AAAM Datenblatt DatasheedAkkuShop.de
This data sheet provides specifications for a rechargeable nickel metal hydride cylindrical cell battery.
1. The battery has a nominal voltage of 1.2V, capacity of 400mAh minimum and 428mAh typical, and dimensions of 10.2mm diameter and 29.2mm height.
2. It can be fast charged at rates between 0.5C to 1C (200-400mA) with charge termination control recommended, and has a service life of over 500 charge/discharge cycles.
This document lists mobile phones, PDAs, GPS devices, and game consoles and whether they are compatible with Bluetooth headsets and car kits from various manufacturers. It shows that most Nokia and Sony Ericsson phones as well as Blackberries, iPhones, and other smartphones are compatible, while older or less common models usually lack compatibility. Several GPS navigation systems and a few PDAs and media devices are also included and noted as compatible or not.
This document provides specifications for a KR-5000DEL lithium-ion cell, including:
1) The cell has a nominal capacity of 5000mAh and nominal voltage of 1.2V.
2) Standard charging current is 500mA and fast charging current is 7500mA, with standard charging time of 14-16 hours and fast charging time of about 1 hour.
3) The cell has an average internal impedance of 3.5mΩ and dimensions of 33.2 x 59.5 mm with a weight of 150g.
1) The document introduces eneloop rechargeable batteries as an alternative to disposable batteries, highlighting their reusability and environmental friendliness.
2) Eneloop batteries can be recharged up to 1,000 times and then recycled, making them more cost effective than disposable batteries over time. They also avoid the waste of disposable batteries.
3) Eneloop batteries retain their charge for a long time, with almost full power even after a year without recharging, unlike other rechargeable batteries that require periodic charging to maintain their power.