1. C ON V E RJ 2 X 2
2 X 2
Biax, T5, T5HO, T8 ARCHITECTURAL RECESSED LUMINAIRE
CONST RUCTION F o r m e d 2 0 g a u g e c o l d r o l l e d US Patent Pending
steel housing. H i g h l y r e f l e c t i v e d i e - f o r m e d
wh ite p a in te d refle c to r. Wi r i n g a c c e s s a v a i l -
a b le o n b o th side a n d to p o f h o u s i n g .
OPT ICS Un iq u e twi n - a r c h e d w i n g s a n d a r ti c-
u la te d cen te r sp in e u ti l i z e a p r o p r i e ta r y l a y -
e red len s cre a tin g a fu l l y l u m i n o u s h o u s i n g
with optimal glare c o n t r o l . H i g h r e f l e c t i v e
wh ite re fle ctors ma i n ta i n u n i fo r m l e n s b r i g h t - 3.50" 3.50" 3.50”
n e ss.
EL ECT RICAL T5, T5HO: Program start 24" 24"
120/277 volt integ r a l e l e c t r o n i c b a l l a s t w i t h
le ss tha n 10 % T H D . Sta n d a r d 5 5 W Bi a x : Side View Side View
Program start 120 / 2 7 7 v o l t i n t e g r a l e l e c t r o n i c Side View
ballast with less t h a n 1 5 % T H D . S t a n d a r d
4 0 W Bia x: Instan t s ta r t 1 2 0 /2 7 7 v o l t e l e c - 3.50” 3.50” 1.56” 1.56” 3.50”
tronic ballast with l e s s t h a n 1 0 % T H D . T 8 :
Instant start 120/2 7 7 V e l e c t r o n i c b a l l a s t w i t h 24" 24"
le ss tha n 10 % TH D . Sta n d a r d s i n g l e c i r c u i t.
Each ballast prov i d e d w i t h d i s c o n n e c t s t o
mee t lu mina ire d is c o n n e c t c o d e r e q u i r e m e n t.
Lamp Options Lamp Options
MOUNT ING Co n v e r j i s d e s i g n e d to i n s ta l l
flu sh in to a cou st i c a l g r i d a n d i n a c c e s s i b l e 1 and 2 lamp Biax 1 and2, 3 T5 /Biax
1, 2 lamp T5HO 1, 2, 3 T5 /3T5HO
1, 2, T8 1, 2, 3 T8 1, 2, 3 T5 /
ceilings. Specify G 1 , G 9 o r G S f o r a c o u s t i c a l
g rid ce ilin g . Spe c i fy FL fo r i n a c c e s s i b l e c e i l -
ings. Consult fact o r y f o r d e t a i l e d i n s t a l l a t i o n
in stru ction s.
FINISH Po wd e r-coa t w h i te p a i n te d fi n i s h o n
e xpo sed trim.
LABEL S UL a n d cUL L i s te d , a p p r o v e d fo r d r y /
d a mp lo catio n u n le s s o th e r w i s e n o te d .
L U M I N A I R E S P E C I F I C AT I O N Sample Catalog #: CJ22A-2T5HO-G1-120-1C-W
CJ22_- _____- __- ___- __- W- ___
HOUSING LAMPS M O U N T I NG VOLTAGE C IR C U IT/WIR IN G 9 FIN ISH OP TIO NS
CJ22A- Converj 1BX40- (1) 40W Biax Acoustical Grid3.50”
Ceiling 120- 120V 3.50” Single Circuit, Normal
1C- W- White QS- Quick Ship5 3.50”
2X2 Recessed 2BX40- (2) 40W Biax G1- 1” Ceiling Grid 277- 277V 2C- Dual Circuit, Normal3 TW- Through-Wired6
12" 12" Step Switching (T5, T8)9
with Satine Lens 1BX55- (1) 55W Biax G9- 9/16” Ceiling Grid 347- 347V1 1D- Single Circuit Dimming9 SW-
CJ22R- Converj
2BX55- (2) 55W Biax GS- Screw Slot Ceiling Grid
Side View UNV-UNV2 2D- Dual Circuit Dimming3,9 DSM- Remote Daylight Sensor Master -
Side View
Side View
1T5- (1) 14W T5 (120/277) 1E- Single Circuit with Sensor Included (T5, BX, T8)7
2X2 Recessed 4,9
2T5- (2) 14W T5 Inaccessible Ceiling DSS- Remote Daylight Sensor Satellite -
with Round Perf 3.50” 3.50” Emergency Circuit
3T5- (3) 14W T5 1B- Single Circuit with 1.56” Sensor 1.56”Included (T5, 3.50” 7
Not BX, T8)
FL- Standard Flange
CJ22L- Converj 1T5HO- (1) 24W T5HO 24" Battery Pack4,8,9 GLR- Internal Fast-Blow Fuse
(Separate drywall kit) 24"
2X2 Recessed 2T5HO- (2) 24W T5HO AR- Air Return
with Linear Slot 3T5HO- (3) 24W T5HO CP- Chicago Plenum
CJ22B- Converj
1T8- (1) 17W T8 Lamp Options Lamp Options FW6- 6’, 18-gauge, Flex Whip Lamp
2T8- (2) 17W T8 FW12- 12’, 18-gauge, Flex Whip
2X2 Recessed 1 Biax 1, 2, 3 T5 / 1, 2 T5HO 1, 2, 33T8 / 1, 2 T5HO 1, 2, 3 T5 / T5H
3T8- (3) 17W T8 1 Biax 1, 2, T5 1, AM- T8Antimicrobial Paint
2, 3
with Baffle
SI- Seismic Clips
6Individual fixtures are through-wired for continuous pattern. Fixtures cannot be joined.
1Consult factory for 347 volt ballast.
7DSM includes fixture with remote sensor and dimming ballast. Controls DSS units (up to 19
2Not available for use with a battery pack.
dimming ballasts). Specify 1D or 2D (0-10v) in Circuiting section of part number.
3Dual circuit available for 2 (side-by-side) and 3 (inboard/outboard) lamp configurations. DSS includes fixture with a sensor compatible dimming ballast only. Must be used in conjunc-
4Emergency circuit or battery pack to be on center lamp with 3 lamp configurations. tion with a DSM unit. Specify 1D or 2D (0-10v) in Circuiting section of part number.
5Quick Ship includes T5, T5HO, T8 and Biax, Universal voltage, white finish, Chicago Plenum, 8Battery Pack must be remote mounted with 3T5 and 3T5HO.
9Some Converj configurations will not accommodate all options. Consult factory.
single and dual circuit. Consult factory for dimming, battery packs and sensors.
M O U N T I N G D E TA I L T H R O U G H - W I R E ( T W ) D E TA I L
G1 G9 GS FL Side View
4.00” 4.00”
Hardware
(by others)
12.63" 12.63"
Side View Side View 1.56”
4.00” 4.00” 2.10” 2.10”
1” Ceiling Grid 9/16” Ceiling Grid Screw Slot Ceiling Grid Standard Flange
12.63" Specify (TW) in the options section of the part number.
12.63"
(Inaccessible Ceilings)
PINNACLE ARCHITECTURAL LIGHTING™ 12655 East 42nd Avenue, Suite 50 Lamp Options 80239 Ph 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com
Denver, Colorado Lamp Options
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle- September 2009
ltg.com are the most recent version and supersede all other previously printed or electronic versions. © 2009 Pinnacle Architectural Lighting™
1, 2 Biax 1, 2 CFL2 Biax
1, 1, 2 CFL

2. PHOTOMETRICS CONVERJ 2x2
873 1527
Test # 203056 Test # 203050
655 1145
Lamp: (2) 14 Watt T5 Lamp: (1) 55W BX55
437 Total Luminaire Efficiency: 82.8% 763 Total Luminaire Efficiency: 81.8%
218 382
Converj 2x2 Converj 2x2
F E AT U R E S A N D O P T I O N S
2T5 14W 1bx55 55W
AIR RETURN e cency
93.1% REMOTE DAYLIGHT SENSOR
81.8% E cency
APPLICATION: Air Return is an alternative method for allowing air to access the APPLICATION: Daylight sensor is a turn key solution for lighting control. Remote
plenum. Optional Air Return blends into ceiling grid with minimal slot visibility. sensor is easily wired to the 0-10 volt dimming ballast installed in the fixture.
TECHNICAL: Air Return component is supplied integral to the fixture housing. DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and pres-
Made of 20 gauge cold rolled steel painted to match fixture housing. 5/16” diameter ence of daylight. Sensor can control up to 20 dimming ballasts. Sensor is factory
holes are spaced 5/8” on center to allow air to pass between housing and ceiling calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the default setting by
grid. rotating the aperture. Daylight kit includes sensor and cover plate.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section of
ORDERING INFORMATION: Specify Air Return in the options section of the part
the part number when ordering Remote Daylight Sensor. Remote Daylight Sensor
number. (Sample Catalog #: CJ22A-1T5-G1-120-1C-W-AR)
Master (DSM) includes the fixture with remote sensor and dimming ballast. Controls
DSS units. Remote Daylight Sensor Satellite (DSS) includes the fixture with a
sensor compatible dimming ballast only. Must be used in conjunction with a DSM
unit. 1D or 2D (0-10v) dimming must also be specified. (Sample Catalog #: CJ22A-
1T5-G1-120-1D-W-DSM)
MAINTENANCE
Converj’s fully enclosed optical system prevents debris from entering into the fixture cavity and provides easy maintenance when cleaning.
Converj is fully maintainable from the room-side of the luminaire.
Lamp Maintenance Ballast Maintenance
Locate stamped “O” on fixture bulkhead. One-piece door frame swings open allow- Door frame remains captive to fixture Open one-piece door frame. Ballast is
Fixture opens from this side. Gently pull ing access to the lamp(s). during lamp maintenance. fully accessible once the ballast cover is
down on stamped fixture end where lens removed. Door frame remains captive to
meets bulkhead to release one-piece door fixture during ballast maintenance.
frame.
PINNACLE ARCHITECTURAL LIGHTING™ 12655 East 42nd Avenue, Suite 50 Denver, Colorado 80239 Ph 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinna- September 2009
cle-ltg.com are the most recent version and supersede all other previously printed or electronic versions. © 2009 Pinnacle Architectural Lighting™