2. PASCAL’S LAW
Pascal’s Law stated that the intensity of pressure at a given point is equal in all
direction for a static fluid or it can be said as when fluid is at rest in closed space,
pressure change a point is transmitted to every portion of fluid without any loss and
to the surface of closed space.
Illustration –
According to the Pascal’s Law, pressure applied on piston will produce an equal
increase in pressure on another pressure only if the area of the second piston is 10
times that of first, the force on second piston will be 10 times greater though the
pressure is same as the that on first piston.
3. HYDRO-STATIC LAW
According to Hydro-Static Law (fluid at rest) it states that the specific weight of the
fluid at point must be equal to the rate of increase of pressure in vertically downward
direction.
In mathematical form:-
Where p = hydrostatic pressure or difference between given two points within
fluid column, due to weight of fluid
ρ = density of fluid
h = height of fluid above the point of measurement (pressure head)
g = acceleration due to gravity
4. FLUID PRESSURE AT A POINT
Consider a area dA in a mass of fluid and it is stationary. Then we can say that force
exerted by surrounding fluid on area dA will be perpendicular to the surface of the
area dA. Let dF be the force action on the area dA in normal direction. Then the
reaction of dF/dA can be known as the intensity of pressure on considered area.
Hence mathematically when fluid is at rest the pressure at a point is:-
Then pressure at any point if force (F) is uniformly distrusted over the area(A) is given
by:-
The units of pressure are: a) kgf/cm^2 and kgf/m^2 in MKS units, b) N/m^2 and
N/mm^2 in SI-units it is also known as Pascal represented by Pa. Other commonly
used units of pressure are kPa and bar.
5. PRESSURE MEASURING SYSTEMS
There are two different systems to measure pressure on a fluid. In one
system, pressure is measured above the absolute zero or complete vacuum
it is called absolute pressure. Another way to measure pressure on a fluid is
by measuring it above atmospheric pressure and it is called gauge pressure.
Thus:
Absolute Pressure – It is defined as the pressure which is measured with
reference to absolute vacuum pressure.
Gauge Pressure – It is defined as the pressure measured above atmospheric
pressure (as datum) with the help of pressure measuring equipment. The
atmospheric pressure on the scale of equipment is marked as zero.
Vacuum Pressure – Pressure measure above atmospheric pressure is known
as vacuum pressure.
6. Cont...
Relationship between absolute, gauge and vacuum
pressure can be shown mathematically as:-
Absolute pressure = Atmospheric Pressure + Gauge Pressure
Vacuum Pressure = Atmospheric Pressure – Absolute Pressure
Note:- a) Atmospheric pressure head is 760 mm of mercury or
10.33m of water
b) Atmospheric pressure at sea level at 15 degree Celsius is
101.3kN/m^2 in SI units
7. PRESSURE MEASURING DEVICES
The pressure of a fluid can be measured by the following devices:
Manometers
Mechanical Gauges
Manometers – It is device used for measuring the pressure at a point in a
fluid by balancing the column of fluid by the same or different column of
the fluid.They are further classified as:
Simple Manometers
Differential Manometers
Mechanical Gauges – It is device which uses spring or dead weight to
measure pressure by balancing it with fluid column. Commonly used
mechanical pressure gauges are:-
Diaphragm pressure gauge
Bellows pressure gauge
Dead-Weight pressure gauge
Bourdon tube pressure gauge
8. THANK YOU
Please feel free to comment your suggestions
and any correction....